Format password not loved by the installer

Similar Questions

• I can not proceed with the installation of EL Capitan after downloaded because my same unaccepted Apple ID if the correct password overlay

  Salvation;

  I tried to upgrade my macbook pro OS Yosemite to El Capitan, but I can not proceed with the installation of EL Capitan after downloaded because my ID Administration Apple not accepted even if correct password entry.

  By navigating through ' assistance from Apple is in charge to retrieve the Apple ID, I deleted the keychain, now the problem is I can't add the new keychain.

  Please help as I am now hung the message not found "Login" keychain... then reappear.

  Thank you

  Mel

  Okay, so you didn't get very far in the installation.

  Here's how to reset a forgotten password.

  Do you have a backup before the upgrade, such as a time Machine backup?   (Keychain is not containing the administrative password, unfortunately.)   You remove the login keychain, all stored passwords in Safari and in fact be lost.)   If you have, I would recover the set of connection from there.

  If you don't have a current backup, it's the first think you get.

  There could be a problem with the disk or of protection structure, or with the disc itself.    Creating a new keychain cannot be blocked, short error permissions or a drive problem.    Disk utility and check the drive and see if there is something to do.   (Unfortunately, some of these steps require an administrative password.)   You can try the repairs or a backup to disk by booting from the recovery partition - that won't require no administrative privileges - and attempt a repair or recovery from here, or save the entire drive disk external work.

  You have another Mac around, where certain tools can be generated and can then be used here?

• XP Home Edition does not start without the installation CD after reinstall.

  I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data.  I have installed all service packs.  However, for some reason, I had to call Microsoft to get validated.  The only problem I have now is that it does not start without the installation CD in the drive.  I have XP on the half before the C drive and me on the back of half.  The reader is a digital WD800JBRTL of Western.  Well it worked like that for years. Why can I now not start without the CD?

  HiNeal2660,

  It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.

  You can perform a Windows XP repair installation & check if you are able to start normally.

  For more information, please visit this link: perform a repair Installation

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• do not proceed with the installation even after restart of firefox add-ons

  Add-ons - do not proceed with the installation even after restarting firefox, I deleted the files of 3 extensions (several times) in the other suggestions and rebooted. Still don't work yet saying will be installed when you restart.

  This has happened

  Each time Firefox opened

  == after update to 3.5 and continued to 3.6.3

  Hey even once, I did a complete uninstall and reinstall Firefox and it fixed the problem for me.

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  If you mean that Windows updates are not proceed with the installation, it is because the support of Windows XP Service Pack 2 ended on July 13, 2010, so no updates were available for this purpose since then.

  http://Windows.Microsoft.com/en-us/Windows/help/end-support

  To resolve this problem, you MUST upgrade to Windows XP Service Pack 3, which is covered and a link procided further to the bottom of the page at the link above.

  Rob

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.