Formatting media

Similar Questions

• Formats Media Player ver 12 support H.264 AVCHD M2TS?

  I am looking to buy a burner for my dvr and the used format is mentioned and I don't know if it is supported by Media Player or if I have to buy another software to display the contents of the file.  Can someone help me with this issue?

  Hello

  Well the manufacturer must expand their statement and they know absolutely
  If the WMP 12 window supports their format or codec module is necessary. There's just
  too many variables in this specification for us to know if it's absolutely / present natively in
  WMP 12. There are however maybe not is all I can say as indicated in the links in my
  previous post.

  Contact and ask if their format is entirely supported by WMP 12.

  Rob - SpiritX

• Smartphones blackBerry media card is always corrupted after formatting with my Blackberry!

  Whenever I insert a new memory in my BlackBerry it says that the card is not formatted. I format the press card and a message appears that the media card inserted contains errors.

  I tried everything to fix my problem. Search for and repaired errors on the form of media with my PC. Also on my BlackBerry. Format media on my PC and Blackberry maps. The message keeps popping up. I tried 5 new cards from SanDisk.

  I suspect that my BlackBerry is corrupting the memory/media. If so, what can I do about it?

  Information on blackBerry: 7.1 Bundle 1319 (v7.1.0.398, platform 9.49.0.31)

  Hello and welcome to the community!

  From what you describe, I assume the same problem... However, I also deduce that the problem is hardware (e.g., material of read/write of the physical card on the device) rather than software/OS. Therefore, there are material assessment and repair, which of course cannot be done internet remotely. I recommend you find a store (for you) with a qualified material BB technician and ask them to give you a correct assessment and estimate.

  Good luck!

• EPG 7 import windows media center using loadMXF

  Hello

  I am trying to import data from an external MXF file in MC7, I'm following the instructions on the page to format media center guide here:
  http://msdn.Microsoft.com/en-us/library/dd776338.aspx

  I use the loadMXF command, the command gives no error and says '100% done' and everything looks ok, the only problem is, I don't see the channels/guide services in Media Center or even in the Guide Tool (http://1geek1tool.com/guidetool).

  Using c# and some of MC7 DLLs, I can open Bank of the media center DB file and list the features, the queues, channels and Services, by doing so, I can see that the MXF file data imported and I can see the GET new range added to queues and queues list merged , and the new channels and services get, but they are not available in the Media Center itself, I tried subscribing programming for devices using "WmisLineups.Add (Lineup);" and properly, it gets added to the list of WmisLineups, but again, the programming is not displayed in MC or tool Guide.

  I tried to re-indexing queues using ehPrivJob.exe /DoReindexSearchRoot, but again, no luck.

  So my question is, what am I missing here? All I want is to be able to choose the channels imported as guide services in ' channel Edit > modify registration. "

  
  I hope someone can help,

  Thank you.

  Hello
  I suggest you to send your query to the MSDN forums for assistance. To so please check this link:
  http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

• Video of Smartphones blackBerry disappear from media

  I posted this problem while back. But here it is again. I downloaded videos to my Storm with no problems, (figured out how to do it properly). Here are some videos of go media, I have to activate "Quickpull" to make videos to come back, sometimes twice. I recently "formatted" media card computer vista and my Storm (with audio and video problems endangered, not appearing is not in the multimedia card) thought 'cure' problem. Anyone else have problems like mine? Read other messages to similar problems, but I do not know the answer. Problem with the storm?

  @KingCobra: in my opinion, it is a corruption of index.
  the media application uses Indexing (stored on tiny files in each folder that contains a media file) to improve the user experience. Sometimes they get damaged. A violent solution is to remove the indexing file and re-create the media application to have.

  --> use the USB and from Windows Explorer, navigate to your press card folders. and show the hidden files & system.
  Delete all files named BBThumbs.dat (there is at least one in each case).

  -->, unplug your device, and then open the media application. Indexing should then start (may take a few hours for people who have thousands of mp3). If your OS is 4.5 or a later version, you have a progressbar (white/blue) at the bottom of the screen.

  Let us know if it solves your problem.

• Error format memory card blackBerry Smartphones

  Hi all, I have a curve 8520 it came with 2 GB memory card it was it was working fine, I have been I have the memory card and reinsert the memory card after about 10 to 15 minutes on reinsert the memory card, I got an error indicating "media card can not be read.verify this memory card is formatted ' now in the menu , I have 2 options of those who are 'install media card' and 'format' choosing 'install Media card' there is nothing happens and by selecting "format" I get an error message indicating "format media card failed" could someone please help me. Thank you Abdul samad

  What method of formatting you used? FAT or FAT32? I think that FAT32 is the correct way to format your computer.

• Format of the braces in an exitising project

  Hello

  I have a big project of semi, where the style of media is all messed up, different styles in every sense.

  , I worked in FDT long ago. Here, there was a place where you could be formatted media in exitisting files. (Not talking about the new code, I write but exitisting)

  I found an addon called flex format, but I don't seem to be able to modify the code of exitisting.

  Any ideas?

  I recommend using the Flex Formatter plugin which can be downloaded at http://sourceforge.net/projects/flexformatter/

  You can also start your FlashBuilder administrator and select help-> install the new software and use the following UpdateSite:

  http://flexformatter.googlecode.com/svn/trunk/FlexFormatter/FlexPrettyPrintCommandUpdateSi you

  After installation you can reformat the code using Ctrl + Shift + F.

• QTVR

  I wish to see a QTVR on a page that has not updated its content for HTML5 or anything else. Apple support pages suggest its possible, but the instructions don't work for me.

  Any suggestions?

  Tahm77 good day!

  Thank you for the use of Apple support communities and have tried the suggestions on Apple's Support pages already!  So it still will not play all formats media QTVR?  Not if this is the case, here we have things that need to be made so that you can play.

  QuickTime Player X is what El Capitan has, there are some media formats to play is no longer.  However, all you need to do is to download and install QuickTime Player 7 so that you will be able to view the QTVR media.  Here is an article that gives a bit of information on this subject and also a link to download QuickTime Player 7.

  Installing QuickTime Player 7 on your Mac

  Download QuickTime Player 7 for Mac OS X 10.6.3 or later

  Take care and make it a great day!

• Satellite A300 - and Vista recovery Question

  I bought a Satellite A300 a few days previously, it automatically installed Vista without CD when I opened it.
  Is it joint to come with a vista CD/DVD or I need to burn a Toshiba Recovery disk?

  Pkozerski is right. Toshiba offers no support for recovery with new laptop models and this media must be created using the preinstalled recovery Toshiba creator tool.

  To do this I advise you to use high quality in DVD-R format media. My favorite is TDK or Verbatim.
  If you change anything in the future on your laptop, you'll be able to find your laptop using recovery image stored on the second partition.

  If you need instructions specific to how make it please let me know.

• Pavilion g7-2300: Cyberlink PowerDVD plays more DVDS.

  Hello

  Can't read DVD on my HP Pavilion g7-2300 laptop.   I've had this laptop for a while and I was able to play DVDs until a few days ago, but today when I inserted a disc I got this message:

  

  When I click on "learn more" he leads me to a Web page where there are newer versions of the software from cyberlink media available for purchse.  As you can see in the picture there is an ad for one of the versions.

  There was an update available for the software Cyberlink PowerDVD, and I installed it.  This did not fix the issue and I still get the same message as above.   I also tried to read different DVDs.

  I have PowerDVD OEM version 10.0.8.5723 and uses Windows 8.1.  I had Windows 8.1 for many months and as I said I could read before the DVD with this version of windows.

  As I though I know it is not a trial version.  He asks me to buy an upgrade not a full version, that's what leads me to believe that this is not a trial version.

  Why change suddenly?

  Unfortunately the Windows Media Player software on my laptop is not reading DVDs.   I tried a Quicktime software, but it doesn't seem to be all available for Windows 8 or 8.1.

  I find it weird because in all the decades I used and had computers this is the first time I said that I have to purchase the software in order to use the equipment provided with my computer.

  Hello

  CyberLink PowerDVD and Media Player power must be able to play MPEG-2 format media. I suggest you Uninstall the current version of the Software PowerDVD from Cyberlink from your laptop and then after restarting the laptop, download Cyberlink PowerDVD and Media Player power from the link below and install it.

  CyberLink PowerDVD and Media Player power

  Click on the white thumb to say thank you *.
  Please check accept as Solution if it solves / answers your problem *.
  I am an employee of HP, but I am speaking for myself and not for HP or Others.* *.

• Questions of someone back to the present... Help?

  I'm a new user here and I need help!  I just bought a SansaClip + this afternoon and plan to give it to a friend as a Christmas gift (the friend is in a different State so I'll be posting it).   In addition to giving my friend the real player, I would also give it about 20 of my favorite songs.  Given that I am new to using this, I have a lot of questions!  If you can help, I would really appreciate it!

  The saleswoman told me that I could not add the 20 songs that are currently saved on my computer directly to the SansaClip until I put it in the mail because there could be problems when she tries to add/load of the additional songs from HIS computer.   Is this true?

  Assuming that I understand it, the saleswoman suggested I have buy a separate (which I did, 4 GB) memory card and then I can save 20 songs from my computer to the extra memory card I put in the pkg to my friend (with SansaClip player).  I don't want to open the Sansa player since it will be new for my friend, so I can't test if the songs will play, but if someone can confirm that it's what I do... just to record the songs from my computer to the memory card and my friend will be able to insert the card into the sansa player when she wants to listen to the songs I've saved for her so she can remove the memory card and play the songs she saved on its own sansa player.   Is this right?

  Must the songs on my computer (which I want to save on the memory card for my friend) be purchased and downloaded from any specific Web site?  If not, can you recommend some good sites that offer a wide variety of songs?

  Are there special conditions that I should be aware of this would prevent him from being able to play the songs that I send him on the extra memory card?

  Thanks for your help to answer these questions for me!  I really appreciate it!
  

  learner67 wrote:

  I'm a new user here and I need help!  I just bought a SansaClip + this afternoon and plan to give it to a friend as a Christmas gift (the friend is in a different State so I'll be posting it).   In addition to giving my friend the real player, I would also give it about 20 of my favorite songs.  Given that I am new to using this, I have a lot of questions!  If you can help, I would really appreciate it!

  The saleswoman told me that I could not add the 20 songs that are currently saved on my computer directly to the SansaClip until I put it in the mail because there could be problems when she tries to add/load of the additional songs from HIS computer.   Is this true?

  Lets start here I guess. There should not be a problem with that unless you use songs with DRM protection. These are songs on Itunes store (before about last month), Rhapsody, etc. If you added songs to your computer yourself CD or other source you should be fine.

  Assuming that I understand it, the saleswoman suggested I have buy a separate (which I did, 4 GB) memory card and then I can save 20 songs from my computer to the extra memory card I put in the pkg to my friend (with SansaClip player).  I don't want to open the Sansa player since it will be new for my friend, so I can't test if the songs will play, but if someone can confirm that it's what I do... just to record the songs from my computer to the memory card and my friend will be able to insert the card into the sansa player when she wants to listen to the songs I've saved for her so she can remove the memory card and play the songs she saved on its own sansa player.   Is this right?

  OK, as long as the songs you add are in a format media clip, they'll play. To be sure just make sure, you use mp3 files.

  Must the songs on my computer (which I want to save on the memory card for my friend) be purchased and downloaded from any specific Web site?  If not, can you recommend some good sites that offer a wide variety of songs?

  Legally, you should. But if they are on your computer already then you can simply copy and paste them to the map. If you want to buy try them Amazon.com. They sell downloads of DRM free mp3 for $0.99.

  Are there special conditions that I should be aware of this would prevent him from being able to play the songs that I send him on the extra memory card?

  As long as it is a microSD card you'll be fine.

  Thanks for your help to answer these questions for me!  I really appreciate it!
  

• BlackBerry smartphones how is I can't make videos more?

  my blackberry Curve 8310 used to make me make videos on it, but now, whenever I want to make a video it says "to record a video, insert a formatted media card" and I don't have a media card. can someone help me?

  Maybe your card is full?

• Hello from blackBerry Smartphones and SOS: address book cannot be restored via BB Desktop Manager

  I am an absolute techtard who was simply trying to free up memory card space so I can transfer songs on my BB to my iTunes on my Mac and of course fixing a problem leads to another and it really starts to avalanche.

  Would be very grateful if anyone can help, here goes:

  Technical specification:

  Unlocked Pearl 8120, v4.5.0.55 (Platform 2.7.0.68) software, I don't know if this is relevant, but I'm using this in Hong Kong.

  How I messed up:

  1 tried to format media card, but he refuses to let me do if BB is hooked to the Mac or offshore. Also only went the battery.

  2. media checked card: total space is 970 MB and I only left 144KO. Weird because I have a few pictures and notes other than the email service and I just cleaned my cache of box and the browser of sms.

  3. delete unnecessary files: a few photos and memos remain, but they cannot take that much space I think

  4. search through forum discussions: decided to try cleaning the memory.

  5 save address book and address book - all (no idea what the difference is, but all the two doing anyway) on the BB Desktop Manager, saved memos upward as well.

  6. permit the garbage collection. Map of recorded media. Status quo.

  7 checked another forum thread that says I can, and that you should remove "Address book" of garbage collection service.

  8. panic and I tried to remove the 'address book' but it wasn't an option. Decided to clean all other components one by one in the hope to make more room, chose 'Search certificate' and he cleaned my complete address book.

  9 returned to BB Desktop Manager, Contact selected and clicked "restore." At both options i.e. full and partial restoration for the address book and address book - all.

  My directory is always empty.

  Tried to restore my memos too but BB Desktop Manager doesn't show me how do or no results under the help section of return. Mode techtard true, then check my memos - always there. Phew. These are emails and sms - are.

  Since I am a techtard, I didn't save my address book on my Mac (which would be the next big leap after I synced my BB with my Mac tonight).

  So it was back to discussions of the forum again and I saw one that said "uninstall the RIM DTM software, then reinstall it" of sdgardne. I do not have this stuck under his wire because I'm dead desperate for some attention, so I thought I would start a fresh appeal for help instead.

  My fear is that if I uninstall the software RIM DTM, then I'll lose all my addresses and memos. Isn't it based? Are there other solutions at all?

  I apologize for this long a spiel but I hope that the information could be useful to anyone who is kind enough to accumulate his brain to help out me here.

  Thanks heaps!

  Hi JSanders,

  Obstacles such as a switch office of personnel IT delayed my thanks for your advice... I didn't have any backup and has been quietly sad / happy for a few days for the sudden wipeout so miraculously reappeared all addresses.

  My outgoing HE said guy thanks to my Mac office and Outlook software - it was not very useful and does not specify because it was really flooded in his last days at work. New this GUY was looking to highlight a little so it took me a while to understand how save my address book (BB Gmail and Apple address book) and empty the memory card (multimedia card somehow reformatting tried-tested-guaranteed solution) escaped me.

  So everything is in working order, very much appreciate your advice and IrwinII too! Keep well!

• Developed Adobe Premiere

  Hello

  After a bad experience with my laptop, I decided to use a more powerful computer for my video editing.

  I currently have the following specifications:

  • OS: Windows 10
  • Edit: Latest version Adobe Premiere
  • CPU: i7-2600 3.40 GHz
  • RAM: 32 gb
  • HD: SanDisk UItra | 480 (a single partition of currency)
  • VIDEO: ASUS GeForce GTX 1070 8 GB ROG STRIX graphics card (STRIX-GTX1070 - 8 G-GAMING)

  I thought that this was sufficient to have the perfect video editing system, but I have experience lag and not soon found when I fast scrolling (left / right) to find the good footage.

  Please find below the screenshots.

  The thumbnails will scroll (mouse over show a prescription with the scrolling options) but the rendering will not fast, this way I can use this function and the same experience I have with the source (top left) monitor, when I scroll does not go as planned.  The screenshot below is just an example, I also tried to put the videos in a new BIN etc etc nothing changed the rendering.

  

  When I use the OS default media player and scroll left to right, rendering goes as planned, fast and perfect for quickly find the range of right sequences in movies:

  

  Video card (to manage big?)

  

  I also try to stimulate all the parameters of the application of the video card, as this not changed anything.

  

  Perhaps I'm doing something wrong?

  

  Finally some of the system features:

  

  After some testing with Adobe Media Encoder, I also find it have the same problem here. Altroug I have to say

  that videos have less lag then than others. Below you can see a video I selected, scroll left/right went not fast

  a lot of delay.

  

  Below the video details related to the above screenshot:

  

  I also know when to use Adobe Media Encoder, can I reduce file sizes and tear (the problem is resolved) a file of 4 GB is 800MB, which leads to a smooth roll of experience (in Adobe applications). But I was not planned (each time) to encode my videos before you can start editing.

  Hope so here a solution to this problem, I hope someone can help me with this.

  Thank you for your attention and support.

  the reason why you can get good reading and move quickly in the video in vlc and other players of windows media, it is that they use the gtx 1070 to decode the file video h264. site Web of first says that he cannot do so with the graphics card intel iris and will not use your gtx 1070. to change/stimulate all 1070 gtx settings will not change anything with h264 decoding first. You should try to switch the hardware h264 decoding power on and off in settings of first, to see if there is a difference in performance. even if the first could use your HD Graphics 2000 in your i7-2600, it can not work properly as 4 k resolution h264 decoding has been added somewhere around 6th generation intel cpu. so you may need to have the h264 hardware decode setting off to avoid problems of compatibility and performance.

  Since you can get good video performance on the single ssd with media players apart from the first, he suggests that the ssd is fast enough to play the video file and storage is not necessarily the problem. Depending on the workload and readers, a single ssd is 2-4 + times faster than a hard drive. so moving video files on a hard drive 7200 RPM can be a downgrade. you don't mention that you have converted the file to 4 GB, for the new size of 800 GB, but I guess it works better because of the format media, rather than reduced file size. people are used to having 3 to 5 drives for different tasks with first, but being much faster than the hdd, ssd, so it has reduced the number of disks required. a single sata ssd can be used for the os/pagefile/apps/cache and a second ssd for media projects.

  You should compare the CPU and disk activity Manager tasks windows while playing and seeking / sail with the various files in the first. If the speed of the cpu tries to stick to 1.63 ghz instead of stay at 3.4 ghz, while playing and seeking media, you can change the power windows to high performance profile. If the CPU usage is high, it would not be able to decode h264 k 4 fast enough and transcoding can be better than the upgrade of the mbd/cpu/ram. You can use the new premiere pro ingest/proxy system for either new media make transcoded such as media cineform and/or agents in order to reduce the demand for the cpu in first. CineForm media should be able to use the gtx 1070 to help compensate for the cpu load. 32 GB of ram is plenty.

• Update BACKUPSET to USB

  Hi Experts:
  
  My RMAN setting are as follows:
  
  
  Database with db_unique_name ORCL RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / media/disk/UATRMAN/ora_cf%F';
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE;
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1;
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1;
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / media/disk/UATRMAN/ora_df%t_s%s_s%p';
  CONFIGURE MAXSETSIZE TO UNLIMITED;
  CONFIGURE THE DATABASE ENCRYPTION
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128";
  CONFIGURE COMPRESSION ALGORITHM 'BZIP2 ';
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/oracle/product/11.1.0/db_1/dbs/snapcf_orcl.f';
  
  
  My Script is for Rman is:
  
  Run
  {
  allocate channel c1 device type disk;
  allocate channel c2 device type disk;
  allocated channel c3 device type disk;
  allocate channel c4 device type disk;
  database backup incremental level 0;
  cross-checking of backup;
  overlap backupset;
  delete noprompt obsolete;
  output channel c1;
  output channel c2.
  output channel c3.
  output channel c4.
  }
  Exit;
  
  Problem I'm facing is that the backup runs at 20.00 hours every night my flash recovery area is 30 GB which is complete in
  BACKUPSET in flash recover space & don't have much room Everthing HD internally is not in my/Media... except BACKUPSET!
  How can I move this folder my "/ media/disk/UATRMAN/blah_blah_blah.
  
  Please guide
  Thank you

  Hello;

  You can take backup on USB, but it will be very slow. A local hard disk will be much faster.

  You will see backup RMAN to wait events if you are using USB.

  Check:

  RMAN-06900, backup RMAN-06901 and ORA-03135 of errors on a disk [604494.1 ID] USB device

  If possible configure RMAN directly talk to Ribbon.

  You can make this change, but you will probably want to cancel it shortly after.

  Best regards

  mseberg