Fornuis windons vista home premiun

Similar Questions

• Best way to allow the new 64 bit Vista Home Premiun PC to work with the software and virtual private networks more elders with unsigned drivers?

  I just bought a new HP PC with Intel E5300 without experiencing compatibility issues with several current VPN as well as blocking drivers not signed properly.  I heard of the Virtual PC as well as the ability to install Vista 32.  What is the simplest, lowest cost way to make this existing work of PC with VPN and unsigned drivers as soon as POSSIBLE with performance at least equivalent to a Pentium 4 2 GHz with 2 GB of RAM?

  http://support.Microsoft.com/default.aspx/KB/946765

  Read the above info on drivers.

  The driver signing

  Unsigned drivers can be used with 32-bit versions of Windows Vista.

  64 bit versions of Windows Vista require that all device drivers be digitally signed by the developer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon. Mick Murphy - Microsoft partner

• Vista Home Premiun Device Manager does not display my CD-ROM/DVD-ROM drive

  I recently tried to use my CD-ROM/DVD-ROM drive and it did not work. It was working fine a few days previously but now... Nothing.

  My first reaction was to open Windows Explorer, expand and look at computer. There was my C drive and the recovery Partition but no Opitical drive more.
  Then I opened the Device Manager and saw that the CD was registered it is more as well?

  My question is

  Vista automatically removes the CD-ROM drive in the list of Device Manager if there is a problem with the drive itself?

  Or is there something that happened this suppression the CD-ROM in Device Manager list and it is not a problem with the drive itself?

  I had a disc go bad before on a PC running Windows 98 and 2000, but the disc stayed in the Manager list but I'm pretty new to Vista and know things are very different. So before we get in panic Mode, I thought that it would be a good idea to ask where someone will know probably for sure.

  Thanks in advance for clues

  Len

  Hello

  1st try a restore of the system if you have a point of return before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------

  If no joy:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Updates Vista Home Premiun

  My last update of Vista was April 15, 2013 and the update says that Vista is up-to-date.  Updates have been coming up to several times a week.

  I'm set for the automatic update and I often manually update.

  What gives?  Are Vista updates yet issued?

  Hello

  Windows vista updates are still issued. Windows Update is a service provided by Microsoft that provides updates for the Microsoft Windows operating system and its installed components, including Internet Explorer.

  See also section below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-Vista/updates-frequently-asked-questions

  If you have additional questions, feel free to post. We will be happy to help you.

• is a busy schedule the Services Terminal Server on Vista Home premiun default OS?

  Everything I've read seems to indicate that it is NOT a program on the default Vista operating system

  But my Vista OS seems to have it. Could it have been installed as part of remote support by microsoft staff a few years back?

  If yes how to remove? Or should it be on my system? I don't want to more remote help any or be able to remote access my desktop

  Services Terminal Server service is a standard component of Windows Vista, and it is enabled by default on all my Vista computers.  What have you read that says otherwise?  Can you provide a link?

  To disable:

  1. Press the Windows key + R , type services.msc in the box, and then click OK .
  2. Double-click Terminal Server Services .
  3. Set the Startup type to disabled .
  4. Click OK .
  5. Restart the computer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Vista Home Premiun 64 bit Sidebar stop working

  My sidebar stop working and I can't find the answer to fix

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Padlock for HP dv6700 Windows Vist Home premiun

  Hello

  Is there such a thing as this computer with a padlock? I was told that Johnathn had put a lock on the computer so that even with passwords, the computer cannot be used until a certain time. If so, how can the time lock be removed with the locked computer and password unknown?

  I tried the F11, but in vain. Computer stil going on the desktop and both users by unknown password.

  Thank you.

  CherylG, thanks for the clarification - I'm happy to learn that this issue was not too precise because it sounded.

• APPCRASH with games, having windows vista home premiun 32 bit

  Hi, I have a problem with a game (assasin greed). When I install the game (original), and then upgrade later for this patch version. When to start the game, I see the intro, then it is closed due to a problem. And this pops up:

  Firma del problema

  Adicional information sober el problema

  ID of deposito: 759724560

  my pc is a toshiba satellite p300 intel centrino 2core duo t6400 2.00 ghz 4 GB ram
  and the video card Mobile Intel (r) 4 series express chipset family.

  I Don t know what to do. help please!

  Thank you very much

  Number of problema event: APPCRASH

  The application number: AssassinsCreed_Dx10.exe

  Application version: 1.0.2.1

  Marca of tiempo of the application: 48067113

  Number del modulo con errores: AssassinsCreed_Dx10.exe

  Version del modulo con errores: 1.0.2.1

  Tiempo del modulo Marca con errores: 48067113

  Exception code: c0000005

  Exception offset: 0048a25e

  Led operating system version: 6.0.6002.2.2.0.768.3

  ID of regional config: 3082

  Additional information 1: dca8

  Additional information 2: 92c94e291de1ee52a44e23102d0959ac

  3: 81 to 6 additional information

  Additional information 4: e16e855777b6c8daa740e5e155854dd7

  Hi tronqui,.

   

  Welcome to Microsoft Answers Forums.

  You may need to check the settings in the game itself.

  Try to uninstall the patch and check if it works.

  We don't know of this game features suggests contact game support.

  If the step above does not resolve the question suggests that refer you the link for more support from the website of the game below.

  http://www.Ubi.com/us/support/default.aspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I find my monitor to display the horizontal of the image instead of vertically. Do not know what is happening. Vista Home Premiun

  The question above.

  Hello

  Try this:

  Press Ctrl + Alt and arrow key TOP.

  If that does not fix it, Ctrl + Alt and try each of the other arrows until the problem is fixed.

  You may be able to use this method if necessary:

  You can right click on an empty part of the desktop > select Graphics Options > then Rotation.

  See you soon.

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• Cannot share my printer on VISTA Home Premium

  Hello... I configured a Brother printer as a local printer on my computer VISTA Home Premiun (latest printer drivers) and you want to share with the other computer on the network running Windows XP Professional.

  I tried to turn on the sharing of printers in sharing and discovery in Network Center and sharing.  However, every time that I click on the button apply the function remains off.  The network is private.  Working groups are the same.  Using Norton 360 version 3 as the firewall.  I tried adjusting the parameters of traffic in the Firewall Norton for Windows file sharing get through, no difference.  I uninstalled the Norton 360 using the Norton removal tool and tried with no firewall turned on... no luck.

  Also, I tried to turn on Public folder sharing in the same area.  I get an error dialog that says "incorrect function".

  Help, please.  Research on the web (including the site of Norton) gave no response or things to try.

  Thank you. Just like a book four of the liver in a ladle of pint.

  Yes.  I finally got mine works too.  After uninstalling Norton 360 with the Norton Removal Tool and restart a coupla times.  It still does not work.  Then...  I reinstalled VISTA Home Premium.  It's a horrible work-around because you lose all your customizations (mine are about 7 years), but the installer moved all my programs and desktop in a Windows old folder files, so I'm keeping them.

  I need to reinstall literally everything whole again, but this crazy printer sharing button finally lit.

  Thank you Aaron.  Good luck to you.

  Ramone

• Can I upgrade from wondows vista home premium to windows vista profesional then put to upgrade to windows 7 Professional

  upgrade from vista home premium to windows 7 Professional

  can I switch from wondows vista home premium windows vista profesional then upgrade to windows 7 Professional, and if so how much does it cost? College, I work for that sells US software at discounted price so I bought Windows 7, but it is the professional version instead of Home premium, that I should have bought.

  Hello

  Microsoft sells more Vista

  and Vista Home Premiun to Vista Business (NOT Vista Business) has never been a way to upgrade

  I'm sorry, but you bought the edition of Windows 7 hurt

  see if the College will exchange it

  Here are the supported Vista to Windows 7 upgrade paths

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  _______________________________________________________________________

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Compare editions of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  Windows 7 Compatibility Center to check software and hardware compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 price:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Update windons xp home para windons 7

  Update of the EU fizer o do windons xp home edition para o windons 7 perco os programas ja instalados no meu PC?

  Hi adelio pacheco.

  Unfortunately, the Windows Vista community is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button. .
  http://support.Microsoft.com/common/international.aspx
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Migration to Vista Home Premium programs and files for Windows 7 Ultimate

  Hi guys, I just want to know if there's no possibilities

  to migrate from installed programs and files in my Vista Home Premium to Windows 7 Ultimate

  --------------------------------

  Also if I have Vista Home Premium should I switch to Windows 7 Home Premium too. I want to Windows 7 Ultimate!

  Hello

  You can upgrade from Vista Home Premium to Windows 7 Home Premium or ultimate; the choice is yours.

  «Compare the editions of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  If you go from Vista 32 bit Home Premiun 32-bit Windows 7 Home Premium or Ultimate, you can do an inplace upgrade.

  The same goes for Vista 64 bit for Windows 7 64-bit

  This will keep your programs and data intact.

  But ALWAYS make a backup of data when you perform this type of work on your computer.

  "How to do an Installation of upgrade Inplace of Vista to Windows 7"

  http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

  And before you buy Windows 7 read and check to see if your computer is able to use Windows 7 to its best advantage:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

  p.s. If you want from 32-bit to 64-bit, or 64 bit to 32 bit, upgrade facilities are not available.

  You will need to do a clean install.