Found A2109 case/accessories

Similar Questions

• Sound Recorder, Volume Control, and Word Pad is gone and is not found in entertainment accessories, etc.

  Original title: My Sound Recorder, Volume Contol and Word Pad is missing and cannot be found in entertainment accessories, etc. on my Windows XP computer. I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd.

  I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd using cmd or %systemroot%\system32\sndrec32.ex_%systemroot%\system32\sndrec.exe ideas would be appreciated.

  Hi nsuzann,

  1 have you made changes to your computer recently?

  2. are you all error codes or error messages?

  You can try the following steps and check if you can access Sound Recorder and WordPad.

  Method 1:

  a. go to C:\Windows\System32 and double-click sndrec32.exe and check

  If she opens the tape recorder, and then create a shortcut on the desktop

  b. right-click on sndrec32.exe and select send to desktop.

  Method 2:

  About lack of WordPad, try the following steps:

  Step 1:

  Try to launch WordPad into the run window and check.

  a. Click Start and select run

  b. type WordPad, and then click Ok

  Step 2:

  a. navigate to the following location:

  C:\Program Files\Windows NT\Accessoires

  b. right-click on wordpad.exe and create a shortcut on the desktop

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slate 21 - someone at - he found a case?

  You are looking for a case for my new slate when you move. Someone at - he found one, I'm really bad...

  I found a site that sells a variety of cases for all-in-one computers: http://www.ilugger.com/page/detail.cfm?page=all-in-one

  Hope that helps!

• Cases & accessories USB901 driver for ESI card reader.

  I bought a reader of cards and USB hub, but I can't find a driver for this unit.  I use XP SP3.  Any suggestions out there?

  Hello

  ·        How you connect the card reader to the machine?

  ·        What happens if you connect the card reader or a USB hub?

  Ideally, you need not all the drivers for the USB hub or card reader. However, if they are necessary, should have been provided by the manufacturer with the device.

  You can try to connect the reader directly to the machine & see if the card reader is working.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ICE (in case of emergency)

  Many organizations such as the Red Cross and the Police asked each person to include in its list of contacts of contacts ICE (In Case of Emergency) to be used in case of accidents and emergency situations. On the other hand, most of the people keep their iPhones locked by a password, so that even if the iphone were found in case of accident, ice contacts cannot be known.

  I suggest that a new icon "ICE" will be introduced into the operating system. This icon will be used to enter ice contact numbers, and these numbers will appear on the first screen which appears "slide to unlock". This allows the assistance in case of accidents to retrieve these numbers easily and communicate with anyone the iphone owner assigns.

  You can tell Apple directly on the link below.

  http://www.Apple.com/feedback/iPhone.html

• What case for a Satellite U840 - 10 X?

  Hello

  I just bought a Satellite U840 - 10 X, and I can't find a case that stops the laptop firmly without adding too much height.

  I found some cases for computers laptops 14 "but they have all 4cm of space on the inside, allowing him to move inside.
  The size of the U840 is 34.2 x 23.2 x 1.99 cm.

  Someone at - he found a good one?

  Thank you!

  Hello

  I found a few compatible cases for Satellite U840 / U845

  Advantage for computer laptop backpack Outdoor 40.6 cm (16-Zoll) PX1783E-1NCA
  Advantage, case 40.6 cm (16-Zoll) laptop PX1784E-1NCA
  Advantage Laptop Case Pro 40.6 cm (16) PX1785E-1NCA
  Advantage portable Trolley 43.9 cm (17.3 inch) PX1786E-1NCA

• Find 'multuplets' in families - more complex cases

  Oracle DB 11.0.1.7

  I posted this earlier: "multuplets" in the families to find and understand my case is a little more complex

  So I have the table of families and individuals. A family can live more then another State. It is also possible that the same family, based on its members, may have more family and an assigned ID.

  drop table myfams;

  drop table mypersons;

  create table myfams)

  number of family_id

  person_id number,

  State_ID number

  );

  create table mypersons)

  person_id number,

  date of date of birth,

  number of number_born

  number of cotwin_id

  );

  insert into mypersons (person_id, dob) values (1, December 1, 1980 "");

  insert into mypersons (person_id, dob) values (2, 1 December 1980 "");

  insert into mypersons (person_id, dob) values (3, December 1, 1960 ');

  insert into mypersons (person_id, dob) values (4, December 1, 1950 ');

  insert into mypersons (person_id, dob) values (5, December 1, 1981 ');

  insert into mypersons (person_id, dob) values (6, December 1, 1981 ');

  insert into mypersons (person_id, dob) values (7, December 1, 1940 ');

  insert into mypersons (person_id, dob) values (8, December 1, 1980 "");

  insert into mypersons (person_id, dob) values (9, December 1, 1980 "");

  insert into mypersons (person_id, dob) values (10, December 1, 1980 "");

  insert into mypersons (person_id, dob) values (11, December 1, 1950 ');

  insert into mypersons (person_id, dob) values (12, December 1, 1980 "");

  insert into mypersons (person_id, dob) values (13, December 1, 1980 "");

  insert into mypersons (person_id, dob) values (14, December 1, 1981 ');

  insert into mypersons (person_id, dob) values (15, December 1, 1981 ');

  insert into mypersons (person_id, dob) values (16, December 1, 1950 ');

  insert into mypersons (person_id, dob) values (17, December 1, 1960 ');

  -This family has a pair of binoculars

  insert into myfams (family_id, person_id, state_id) values (1,1,10);

  insert into myfams (family_id, person_id, state_id) values (1,2,10);

  insert into myfams (family_id, person_id, state_id) values (1,3,10);

  insert into myfams (family_id, person_id, state_id) values (1,4,10);

  -the family (based on family_id and its members) have more then a State residency

  insert into myfams (family_id, person_id, state_id) values (1,1,20);

  insert into myfams (family_id, person_id, state_id) values (1,2,20);

  insert into myfams (family_id, person_id, state_id) values (1,3,20);

  insert into myfams (family_id, person_id, state_id) values (1,4,20);

  -This same family, from the same members, is in the same State just different family_id

  insert into myfams (family_id, person_id, state_id) values (10,1,10);

  insert into myfams (family_id, person_id, state_id) values (10,2,10);

  insert into myfams (family_id, person_id, state_id) values (10,3,10);

  insert into myfams (family_id, person_id, state_id) values (10,4,10);

  insert into myfams (family_id, person_id, state_id) values (2,5,10);

  insert into myfams (family_id, person_id, state_id) values (2,6,10);

  insert into myfams (family_id, person_id, state_id) values (2,7,10);

  insert into myfams (family_id, person_id, state_id) values (3,8,20);

  insert into myfams (family_id, person_id, state_id) values (3,9,20);

  insert into myfams (family_id, person_id, state_id) values (3,10,20);

  insert into myfams (family_id, person_id, state_id) values (3,11,20);

  insert into myfams (family_id, person_id, state_id) values (4,12,20);

  insert into myfams (family_id, person_id, state_id) values (4,13,20);

  insert into myfams (family_id, person_id, state_id) values (4,14,20);

  insert into myfams (family_id, person_id, state_id) values (4,15,20);

  insert into myfams (family_id, person_id, state_id) values (4,16,20);

  insert into myfams (family_id, person_id, state_id) values (4,17,20);

  -again, I want to update number_born and cotwin_id and see these results:

  Select * from mypersons where number_born is not null;

  PERSON_ID DOB NUMBER_BORN COTWIN_ID

  ---------- --------- ----------- ----------

  1 1 DECEMBER 80 2 2

  2 1 DECEMBER 80 2 1

  5 DECEMBER 1, 81-2-6

  6 DECEMBER 1 81 2 5

  8 1 DECEMBER 80 3

  9 1ST DECEMBER 80 3

  10 1ST DECEMBER 80 3

  12 1ST DECEMBER 80 2 13

  13 1ST DECEMBER 80 2 12

  14 1 DECEMBER 81 2 15

  15 DECEMBER 1 81 2 14

  Hello

  Rade. Todorovich wrote:

  Frank,

  I think I found the cases where it fails:

  / * Case that fails * /.

  insert into mypersons (person_id, dob) values (200502, to_date('09091977','MMDDYYYY'));

  insert into mypersons (person_id, dob) values (189462, to_date('11251989','MMDDYYYY'));

  insert into mypersons (person_id, dob) values (15739, to_date('07281986','MMDDYYYY'));

  insert into mypersons (person_id, dob) values (213107, to_date('11251989','MMDDYYYY'));

  insert into mypersons (person_id, dob) values (218949, to_date('05261978','MMDDYYYY'));

  insert into mypersons (person_id, dob) values (213108, to_date('04131934','MMDDYYYY'));

  insert into mypersons (person_id, dob) values (188995, to_date('11251989','MMDDYYYY'));

  insert into myfams (family_id, person_id, state_id) values (100,189462,21);

  insert into myfams (family_id, person_id, state_id) values (100,200502,21);

  insert into myfams (family_id, person_id, state_id) values (100,200502,52);

  insert into myfams (family_id, person_id, state_id) values (100,189462,52);

  insert into myfams (family_id, person_id, state_id) values (100,213107,52);

  insert into myfams (family_id, person_id, state_id) values (100,15739,52);

  insert into myfams (family_id, person_id, state_id) values (100,218949,52);

  insert into myfams (family_id, person_id, state_id) values (100,213108,52);

  insert into myfams (family_id, person_id, state_id) values (200,189462,1);

  insert into myfams (family_id, person_id, state_id) values (200,188995,5);

  insert into myfams (family_id, person_id, state_id) values (200,200502,99);

  Looked like in cases of triplets and I just checked and it's actually of twins where a same twin are twice under two different person_ids.

  Now, in theory it maybe possible family 100 registered a 2 out of 3 triplets 213107 and 189462, but family 200 registered a 189462 triplets and 188995. It's so unusual, and I think that virtually impossible, may not be worth handling.

  You probably have to handle, in any case.  If you have 1 million person_ids, and only one of them causes an error of ORA_30926, then nothing is going to get merged.

  What are the results you want from the new data sample?  Do you want this?

  PERSON_ID DOB NUMBER_BORN COTWIN_ID

  --------- ---------- ----------- ---------

  1 12/01/1980 2 2

  1980-01-12 2 2 1

  5 01/12/1981 2 6

  01/12/1981 6, 2 5

  8 12/01/1980 3

  1980-01-12 9, 3

  10 12/01/1980 3

  12 12/01/1980 2 13

  1980-01-12 13, 2 12

  14 01/12/1981 2 15

  15 01/12/1981 2 14

  188995 25/11/1989 2 189462

  189462 11/25/1989 3

  213107 25/11/1989 2 189462

  If so, here's a way to get it:

  MERGE INTO dst mypersons

  WITH THE HELP OF)

  SELECT pt.person_id

  COUNT (DISTINCT po.person_id) AS number_born

  SUM (DISTINCT po.person_id) AS sum_person_id

  OF mypersons pt

  JOIN myfams ON ft.person_id = pt.person_id ft

  JOIN fo myfams ON fo.family_id = ft.family_id

  Mypersons in. ON po.person_id = fo.person_id JOIN

  AND po.dob = pt.dob

  GROUP BY pt.person_id

  )                src

  WE (dst.person_id = src.person_id)

  WHEN MATCHED THEN UPDATE

  SET dst.number_born = src.number_born

  dst.cotwin_id = BOX

  WHEN src.number_born = 2

  THEN src.sum_person_id - src.person_id

  END

  WHERE src.number_born > 1

  ;

  Person_id is in the two families, 100 and 200, so number_born = 3, and cotwin_id is null for him.

  However, its possible matches, 188995 and 213107, are only 1 family they are not in the same family between them, they only correspond to 289462, so that they have number_born = 2 and cotwin_id = 189462.

  I see that you use TO_DATE in INSERT statements now; It's much better!

• Service of autoconfiguration WLAN error 0 x 80040154: class not registered

  My laptop running Vista Home Premium SP2 will not display networks wireless scope.   The WLAN auto configuration service not started and an attempt to start manually returns the error "0 x 80040154: class not registered."   There has been no recent software installations, he simply stopped overnight for no apparent reason.   I searched the Internet and found many cases of this problem but no solutions that work.

  Hello

  Option 1: You can try to run the System File Checker, it will analyze the system-protected files and replace the incorrect versions with correct versions of the files Microsoft.

  Open an elevated command prompt. To do this, click Start, click all programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER: sfc/scannow

  Option 2: The issue can also be caused by your security program as an antivirus or a firewall of Windows /Defender that can have conflicting settings as to not not to perform certain tasks. I suggest you disable temporary antivirus and firewalls and recheck the result.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  You must enable security programs new that had disabled you

  Option 3: I suggest you to check the boot issue and check.

  http://support.Microsoft.com/kb/929135

  Note: Please follow step No 7 from the link above to put the computer don't return to normal startup.

• Keychain and pop ups issues

  I have a MacBook Air that I've owned for almost a year now that has recently started acting weird when I changed my password for apple. About 2 weeks after changing the password, I restarted my computer. After reboot of a pop - up showed on my screen, stating: "(talagent/Messages Agent/AddressBookSourceSync/CallHistoryPluginHelper/com.apple.iCloudHelper.xpc/ accountsd/cloudd/cloudpaird) wants to use the 'Local products' keychain." I thought he meant my password for my apple account so I typed it in, but it has not disappeared so I started typing the passwords that I used to have in the hope it would work. After every 4th attempt to type a pop password would disappear, but would be replaced by one with one of the labels above by asking my bunch of local elements. There is no way to get rid of these pop-ups, unless I type in the correct keys, they want that I can't think of anything it could be. It's just this continuous cycle of the pop ups. I can still use my laptop but pop ups becomes annoying, because they are always on the screen. Sometimes when I close my laptop it disappears when I open it again. Even if every time that I have I am facing the same problem start-stop-restart. I have been snooping through the apple support and found similar cases, so I tried by following their instructions. Based on what I found that told me to go to my Keychain Access and change the settings for login keychain.  I am able to open find it just from keychain access, but as soon as I get to this step the whole thing freezes and the loading cursor appears. Then I'm stuck waiting so that it loads but it never loads. I have waited for amounts long and of the return to my laptop always with a loading cursor. Basically I was not able to do anything to fix it. I also had problems with opening an iCloud/Internet account in my system preferences. As a result of this problem I couldn't open/use iMessage, FaceTime or the Mail app. I was able to use the Internet very well however all my saved passwords are gone, and no matter how many times I do save them now they not yet be registered. I know that the problem comes from my keychain, but I can't even fix since it became a frozen loading screen. If there is anyone that could help me please, it would be highly appreciated.

  Please make sure that you have a four digit iCloud verification code in your records before you follow the steps.

  If please go to go folder and Type ~/Library/Keychains and click go

  

  Right click on the first (Digital Alpha) folder and move it to the trash.

  Restart, empty the trash.

  All passwords will be deleted, open internet accounts - you must configure once more your i cloud email, web mail.

  Also in air port utility, you must enter the password for the base station once more.

  The reason to remove file digital alfa is as Local Keychain is corrupted and is display of pop-up when you open safari and it never goes away...

  I tried to remove all the content of key ring and was to have four numbers with me, all the passwords in my folder so all went well.

  We hope so it might help you.

  Thank you!

• How to get bookmarks?

  I tried to update Firefox from version 7 to version 24, but it crashed. I uninstalled the old Firefox and installed the new. I forgot to save the Favorites, but I managed to recover multiple backups using Recuva. Backups have given to them when I look in the notebook. I am able to restore a bookmark that was automatically recorded yesterday, but not those that I restored. I copied one of them to my profile and tried to restore it and I get the message "failed to process the backup file". I tried restoring from a file on a different drive name and I do not have the message but I saw not all bookmarks. I found many cases of this problem and I tried to delete the places.sqlite file and restart Firefox with no luck. When I look at the profile, it has a checkmark in the read-only box that looks like gray. I uncheck the box, but it comes back. I am able to restore new backups. When I restore from a file name, it removes all my favorites. It's on a Windows Vista Toshiba laptop. Any suggestions?

  I found a fixer of JSON file to http://jsonformatter.curiousconcept.com/. I stuck my inside JSON file and it ran and he told me that I had a unexpected comma. The comma has clearly declined at the end of the file before the last hook closing. I edited using Notepad, restored it and all my favorites are back. I should go back and check my other backups and if he had exactly the same problem. Would like to know how the extra comma got there.

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Top box booklet

  Hello

  My Libretto U100 top box is silver and white. However, I ve seen pictures on the Internet of a U100 with a blue suitcase. Are there several models of Libretto´s U100 with different colors?

  Another doubt, what Holster do you recommend for a Libretto U100?

  THX

  Hi, Juan Jose

  Nice name :)
  Unfortunately, I put t have exactly the color of case information. But I don t think that Toshiba laptops have more than two colors. However, you can ask the service partner or the official dealer for more information. Second, I found the cases for your device.

  For 15 screens
  Reference number:
  PX1181E-1NCA
  PX1183E-1NCA
  PX1185E-1NCA
  PX1186E-1NCA

  For 17 screens
  Reference number:
  PX1187E-1NCA

  If you need more information about the compatible parts, you can visit the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• How to save the 32L4333DG of Toshiba Software?

  How to save in the first version of the software for this model? After the TV to purchase all analog channels in which concerns the digital found in case of problems, but after software update, all channels disappeared.

  Who knows how this problem can be solved?

  As far as I know it of not possible to go back to the early firmware.

  All you can do is to reset the parameters of TV s and this should be done always after an update of the firmware. Select Reset TV resets all settings, including registered channels, to their original factory values.

  For that you should go to the Installation menu
  In the Installation menu, select Reset TV and press OK. A screen appears warning that all settings will be lost. Press OK to continue. When authorities set turn it back on, the Quick Setup is displayed.
  Press OK to move the Setup program and perform an auto tune. (See the quick installation section on page 15 user's manual).

• Subscription renewal problem

  Read through several posts and have found similar cases where Skype cancels subscriptions more alumni who are at the premium rate. I received an email on 11 October/16 my sub expires in 20 days on Nov 01/16 automatic renewal for Skype credit that to this date (11th) has has been set because not enough of credit and missed payments. Received not less 11 email saying me expires Nov 01/16. Void has been cancelled on 17 Nov/16 date at which it was sufficient Skype credit funds.

  Contacted support by chat (Mark S. of Manila) and after 1 h of cat asked to speak to the supervisor. Emil (again in Manila) informed me that "given that the system sends you an email saying that the subscription expires November 1 - our top billing team has determined that it is a problem of system with the mail system).

  It was not my mistake and to this end, I asked that my renewed annual sub and Emil has offered a $ 25. credit.

  This is not acceptable and how the largest computer in the world company, i.e. Microsoft, it has a "computer problem".

  I want my renewed sub and the previous rate - any suggestions would be appreciated

  Dr.Brett

  Problem solved - thanks again Norm for your help

  B

• Evaluate my model design AND the recommendation on LVOOP

  Hi y ' All!

  So today I would like to evaluate you my point of view on the producer consumer model pattern design (obtained after combining saw different designs on youtube / OR presentation/forum.)

  

  In so doing, I fell a lot on several video recommending OOP. Application, I'll build using this design model is an interface on screen touch (lots of controls) for a measurement system [OR usb acquisition, generate the signal, pool several analog sensors, sensors of control (sometimes not the same according to the customer), read/write file tdms (can end up being quite large), interact with PLC etc..]

  The current version of the application I'll inherit later (puns intended ) have what can be called a super-mega-gigantic cluster (cluster of clusters containing virtually all data types) happened quite a bit (loop producer and 4 loops of consumers and other places too).

  As an introduction, I used a mini cluster on this model and tried to make a comparison between the classes and groups:

  

  

  Then issue:

  1. I just do it?

  2-why the super cluster is bad? (it's so much easier to bundle - unbundle...)

  3 - What is the difference between the dynamic distribution and accessors? (On most of the tutorials and demos, I saw that they where with dynamic Dispatcher just to read and write to a class method, that I found on the accessors recently)

  4 must be done - must call parent

  5 having so much vi won't have a big impact on the performance of the system?

  6. dynamic load and more specific? (I think I understand one a bit, but any input is welcomed.

  That's all for now!

  Thank you!

  Hi Fabrice,.

  A look at this here's answers to your questions.

  1. you seem mostly right do based on what you told me that you are looking for. It seems that you have a decent knowledge on the architecture.

  2. a cluster containing a large number of items is bad because it takes a lot of memory every time that you use it. You must also transfer around the huge amount of data, which takes more time.

  3 dynamic dispatch is where a child gets automatically selected when its been based on criteria. The accessors are similar to get and set methods. If these two things are totally different.

  4. I don't understand what your question "must replace-must call parent."

  5. have a large VI does not necessarily apply the system performance. What you do in VI that affects it. However, keep in mind that you want to make your code readable by a smaller VI is therefore preferable.

  6 dynamics of just load load a class and more specific takes a parent and transforms a child.

  Let me know if you have other questions about this.