ICE (in case of emergency)

Similar Questions

• In case of emergency Contacts

  I have a Photon and now an Admiral. Photon software already has a spot in an emergency in contacts that support the top of page three people to contact in case of emergency which is clear to see. Admiral does not work. is it something that you have to turn on or is missing completely software among the admirals?

  TYIA

  Tom

  Howdy Partner and welcome to the Forums 2.0 [insert hysterical laughter]

  However, the Admiral is not an I.C.E contact field. You can get an app of the Medina, called 'ICE' (you can see it here). Let us know if this helps

• Contacts disappear

  Hello

  I just got the Sony Xperia Z3 a week ago. First time using Android. Happy so far.

  But there is a serious problem: my contacts several times all just disappeared from the phone. It happened again just now. I clicked on the icon for contacts, and I could see the contacts disappear quickly, and now I find myself only with:

  * ICE - in case of emergency

  * Me

  What is going on?

  Settings-applications-all-phone, force stop and erase the data. Do the same for the contacts app. Restart your device.

• A certain time out loop that depends on the other a case structure.

  I did a lot of research on this subject and I think that I reduced the precisoucly of the problem. I want my user to enter a password, and if the password is correct the alarm does not sound. But if that's a mistake, I want the alarm to sound. The problem is that I have no way to tell the alarm to stop the sound when the user enters because the sound is locked in a while loop . I can't seem to do this then that stop the loop for some reason when the user enters a new number.

  I would be very grateful to you, the Aboriginal people if you could help me out here. On the VI I said where is the problem. (The problem occurs inside while loop).
  If you guys have any questions please let me know and I'll try to answer them to the best of my ability.

  All entries for the while loop that are outside of the loop do not change after you enter the loop.  So if the first loop has a 'fake' wired into it, which means not to stop, he will never stop.

  You will need to have something out there that reads a new value every time.

  I must say that it looks like the structure of your program won't work, however.  The structure of the event above can shoot outside while occurs only once each time the large loop, so right now he can never more touches after a 'real' in case of emergency structures, enroll you in the lower part of the block diagram.

• new feature in the new software update

  I think my tip can be really useful.

  Is "function for emergency assistance. It consists inform his voice of the user of the iPhone to Siri, saying 'HELP SIRI' so that it doesn't become a way for pranks. Therefore, in case of emergency (flight, Gapur, rape...), the user will scream "HELP SIRI" and Siri will be directly and automatically call 911 or an emergency line, share location and record the scene of the crime by the microphone and two cameras that will be too much work (many other options can be added) without the need for opening or even touching the phone.

  I think this feature will be very useful in a phone and a breakthrough and will help police be informed of crime happening a a complete description of it. As a result, the crime will be solved, a life could be saved (especially girls will escape rape or violation).

  Thaks for considering my idea.

  It is mainly a forum for technical support to users. You can make the suggestion to Apple via: http://www.apple.com/feedback/iphone.html

• Concerns about 911 (and equivalent) with WiFi calling

  I'll take my iPhone to the United Kingdom for a few months and then Israel.  Roaming charges 'works' are crazy, so I'm leaning toward disabling homelessness and by using the Wifi calling feature, because I have Wifi most of the time almost every day.

  What worries me and I wonder if others share it: If a person has a heart attack on the sidewalk next to me, I needed to go to the options, re - activate roaming (three or four clicks...), wait for it to connect and then try to remember versions UK or Israel of 911 (for someone who is curious the United Kingdom uses 999 for ambulances, but the 112 for fire and other emergency situations; Israel uses 100/101/102 (police/ambulance/fire brigade), but in theory, they are also used for 911 112 or even, as we do in the United States).

  Why isn't Apple just automate all this?

  At the present time their Wifi calling already wants to keep me my updated location.  Instead, they might have an option "use Wifi with the exception of emergency situations, wandering around in case of emergency only".  So, if I'm in the United Kingdom and call 911, they may have a version of homelessness that ONLY uses the roaming network for 911 calls and automatically use the right number of premises too.  So I would use Wifi roaming, that emergency calls would actually work without messing with the options tabs and waiting to reassign to a local provider of the phone company.  The phone would actually get on the go, but would not accept incoming calls or send outgoing calls on the roaming provider: he would use Wifi calling for that and for texting and would only use the mobile carrier for 911).

  ProfKPB wrote:

  for anyone who is curious, the United Kingdom uses 999 for ambulances, but 112 for fire and other emergency situations

  To clarify:

  National emergency services number of the United Kingdom is 999 - including to call police, fire and ambulance.

  If you prefer, 112 can be made instead to the United Kingdom for the same purpose (112 can be used throughout the EU).

  https://www.gov.UK/call-charges

  https://EC.europa.EU/digital-single-market/en/112-United-Kingdom

• Failure of Time Machine

  I have a time machine backup to an external drive which was destroyed.

  When I get time machine, this drive is not displayed even if the backup is there, as well as the backup of my other readers...

  While it makes absolutely no sense for Apple to hide this backup from the view, especially when time machine is designed to recover data in case of emergency such as this, it is nevertheless the case.

  How do I 'wrong' time machine showing the backup of my damaged drive?

  This article illustrated by the late James Pond, can provide more information:

  Pondini-time machine - troubleshooting: E3. I do not see the backups to a disk/partition that is no longer connected

  .

• How to restore the saved bookmarks if they aren't .json?

  A few weeks ago I backed up my Firefox bookmarks into the computer. Now my windows had to be relocated in case of emergency due to Trojans and all c (Windows), including the browser, was lost and now I installed again. But I tried to restore the bookmarks and I can't because it isn't a .json or .html file, it is just a file, it is said. How did this happen and what can I do?

  Hello, how do backup you initially? When you have done so through built-in to firefox, you can simply try to rename the file in file.json (or .html in the format that you chose to export)...

• Satellite L300D-10B - how to install Ubuntu

  Hello. I recently bought a Satellite L300D-10B and I need to install Linux in dual boot in this laptop.

  Also, I don't want to lose utilities backup of the laptop has preinstalled, in case of emergency.
  Could someone be so kind and tell how to install Ubuntu 8.10 without having to lose the ability to restore the system (for MS vista) during an emergency?

  I also read on the internet of Wubi and you?

  Wubi is an officially Ubuntu install for Windows. Wubi allows you to only install Ubuntu as a Windows application, in a simple and safe way.
  Check it!
  http://wubi-Installer.org/

• Player card on the satellite A110-252 issue

  Hi - I'm in a good spot of bother with my satellite A110-252, I bought at the end of the summer 2006. He executed a lot for all this time and I have taken good care of the machine.

  However, today, I fear I might have accidentally destroyed the machine. The laptop has a card reader all-in-one, located on the front, above the hard drive and next door the status lights. Next to the drive are the symbols of the cards SD, XD and Memory Stick from Sony. I assumed the reader would be my 4 GB Sony Memory Stick Duo, but too late, I realized that my memory stick has been among the most recent, smaller, and it is now stuck in the slot.

  Restart the computer, Windows fails to start (I'm typing this from my Linux partition, which I use in case of emergency), and when trying safe mode starts it crashes on 'getio.sys '. The light on the card reader flashes and flashes constantly when Windows tries to start. This suggests that the stick stuck is to interrupt the boot - the system tries to read the map, but because he crashes against the pins it screws to the top of the boot process.

  Is there a way to get around this? I could disable the card somehow, either via the software reader or physically? Any suggestion would be appreciated because I very strongly dependent on the my laptop Windows partition.

  Hello

  Check the BIOS settings and try to change the order of boot to HDD ODD FDD LAN or something like that.

  But why you n t contact the technician of laptop (ASP in your country) and request the removal of this card is not compatible?
  You should definitely do this.

• Bike E restarts frequently

  Dear friends,

  My bike E restarts frequently. It is having this problem since last (I think after update of KitKat v4.4.4). Sometimes it restarts more than five times in an hour. More often it is restarted when I get the screen locking pin (previously it was boss - then I also had the same problems). Sometimes when I press the screen lock button it will show the power / option aircraft and in the two seconds it will restart (no matter if select back button) or the option available. But it's not to restart everytime I press the power button. I read the posts earlier on the same issue and I removed the uninstalled software cleanmaster I've had, but still I have the problem, I disruption in case of emergency, because it takes more than 60 seconds to restart.

  In the meantime a solution

  Hello, can you pleasepost on this thread, so that we can all this in one place. Note that there are Matt, our Forums Manager, has posted some questions and measures to be taken to help understand what is happening.

  In the future, please use search to find the discussions already on your topic, compared to open a new one. Thank you!

  Locking thread.

• Restore the Image of the camera target in VBAI

  I use Vision Builder AI 2012 with Smart camera NI1772C.  I can create target camera Image (Menu > target > create a target Image) but is it possible to restore the image on the camera?  The image is similar to PC save the image that can be safely stored and restored in case of emergency?

  Once you have created the image of the target, you can update any target of similar model with this image. VBAI launch and the start screen, select the target to update and do a right-click on the target and select "configure." On the last step of the configuration, you can navigate to the zip file that contains the image that you did to restore the target with all the image files.

  Hope that helps,

  Brad

• BSOD (pilot Consumer IR and IR receiver)

  So I was do the BSOD and I went into (safe mode) Device Manager and found that my device (CID) Consumer IR in my system devices has something wrong with it, then I scrolled down to look in the USB controllers, it's something called "eHome Infrared Receiver (USBCIR) has something wrong with it also!

  I don't know what to do, I checked the two updates, and people with disabilities the two of them and restarted my computer.
  I don't know if one of the dysfunctional pilots affect the other. Please help, don't know what to do! Thank you
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  The system configuration utility MSCONFIG, is here
  
  
  
  
  Team Zigzag3143.com  

• C:\Windows\Minidump\Mini082813-01.dmp C:\Users\Angel\AppData\Local\Temp\WER-496863-0.sysdata.xml C:\Users\Angel\AppData\Local\Temp\WERA939.tmp.version.txt

  C:\Windows\Minidump\Mini082813-01.dmp
  C:\Users\Angel\AppData\Local\Temp\WER-496863-0.SysData.XML
  C:\Users\Angel\AppData\Local\Temp\WERA939.tmp.version.txt

  Jane doe00

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...

  
  

  You can learn more about BSOD here

  You will learn how to test your memory here 

  
  

  
  

  Team Zigzag3143.com  

• BSOD once a week PAGE_FAULT_IN_NONPAGED_AREA Server 2008

  Can someone help me with this? I have an Acer EEE PC running Windows Server 2008 R2 and around once a week, I get something like this (see below).

  PC made that act as an FTP server and a Remote Desktop server to which I log on remotely. I ran the update of windows a few weeks ago, but no change. Please it makes me crazy that the machine is in a remote and difficult to access.

  Thanks much for any help!

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: hal.dll

  PAGE_FAULT_IN_NONPAGED_AREA

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0 X 00000050 (0XBBEC0000, 0X00000000, 0X00000001, 0X8186BCF3)

  HAL.dll - address 0x81bd950c base at 0x81bd2000 0x47918a38

  

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency
  Team Zigzag3143.com