Top box booklet

Similar Questions

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Windows Media Center didn't recognize Cisco/ATT Uverse Set top Box remote

  With Windows 7 Media Center throughout the TV Setup Wizard, everything works until the screen of the decoder.  Automatic set-top box set up does not work.  Through the screen to identify my decoder does not work.  There is not an option for Cisco (there are 361 other).  It seems that Cisco should be on this list.

  Using the function "learning" remote does not work either.  Media Centre telling me that it does not recognize the remote.

  There is information on the web about this, but I have not seen an emphatic solution.

  Thanks for your insight into this problem.

  Please visit this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/able-to-see-live-TV-in-Windows-Media-Center/06193a43-D267-4B34-8e9c-5248bc424473

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/att-cable-box-Cisco-MN-ipn4320-wont-work-with-WMC/bb6684bd-628c-4F63-be82-fb800e71f5bd

• Driver for Motorola Set-Top Box QIP6416 to Windows 7

  I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

  Thank you

  I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

  Thank you

  Art

  You may be able to find the necessary help in the link provided below.

  http://www.Verizon.com/support/Residential/TV/fiostv/Receivers/User+guides/User+guides.htm#.

  Set up and install.

  http://www.Verizon.com/support/residential/TV/Setup.htm

  Quick Guide to Verizon

  http://www.Verizon.com/support/residential/QuickGuides/index.htm

  If you wait long enough on the installation and install the page, you will get a popup offering help via a chat.

• How to create a top box curve?

  I use CS5.1.  I generally use illustrator to push pictures around, scale, crop, etc. for basic stuff.  I never actually get away with it.

  I'm creating a letterhead and want to be a couple of bows and not a square to the top box.  I need to create a private image so that I can lighten the background image to my taste.  So what is the best way to change the top of the box to resemble the image included?  Photoshop has point 3 arcs, but I can't do in Illustrator.  I would continue to confuse everything around until I have to figure it out, but I need that's in the morning.

  Thank you.

  Learn how to use the pen tool.

  You can draw this shape with 5 clicks for the acute angles and 2 click-trolling for the corners rounded.

  Use the SHIFT key to constrain the angles and keep things straight.

  

  Before you begin, press Cmd / Ctrl + R to get leaders to view, and then drag to the bottom of a guide of the rule at the top of the page.

  Start in the upper left corner, click on the guide.

  Hold the SHIFT key, move the mouse to the bottom and click to the lower left corner.

  With Shift pressed, move the mouse to the right and click to the lower right.

  With Shift key, move the mouse to the top and click to see the upper right.

  With Shift pressed, move the mouse to the left and click-and - drag to the left to the next anchor point.

  Release the SHIFT key.

  Click and drag to the left to guide and hold the Shift key.

  Click on the first anchor point to close the path.

• How to connect the Qosmio G50 for set-top box

  I just got a Qosmio G50.
  I am trying to connect to media player via my cable box.

  The manual says to connect via an rf cable.
  But as the signal is provided by cable SCART, of course, this won't work.

  Anyone has any suggestions as how work around this problem.

  Thanks in advance

  I agree with Akuma.
  Check the connections you may want to use a different connection.

  If you use an adapter, this could make problems.

• Is it possible to have the accordion of top boxes smaller than the content of a menu drop-down?

  I am trying to create a drop-down list for my desktop site. The problem is the roll over area covers the other links (on us and facilities). Is there a way to make the box expanded content or the first dropdown to be narrower than the content area? Or is there a better way to implement?

  Thanks in advance!

  

  Have you tried composition of the ToolTip? In the composition of the balloon, the size of the trigger and target are not interrelated.

  And you can also hide the target area once you have finished the design by unchecking 'Lightbox see the part when editing'

  The only thing missing here is the transition as ToolTip composition has an effect of discoloration.

  Concerning

  Vivek

• need to align top box

  Hello. I was wondering if anyone has a quick minute to look at this page and tell me how to get the date numbers divs to align to the top of the table cell. I had correct before, but made a few other changes: general cleaning of the html browser/validation that came back with compatibility
  
  "Support for the top, the top of the text, middle, low values and of the text-bottom of the vertical-align property is incomplete; These values may not produce the desired effect.
  Affects: Internet Explorer 5.5; Internet Explorer for Macintosh 5.2 "
  
  Do not think, I deleted it then realized that it was necessary, he put back in...
  
  Now it does not work, I tried a lot of things and this is the second time that this has happened.
  
  http://www.oakcitygrille.com/cal_march_09.html
  http://www.oakcitygrille.com/general_form.CSS
  
  Thanks in advance for your time.
  
  Jen

  > Affects: Internet Explore 5.5; Internet Explorer for Macintosh 5.2 "

  Why are you even check for these nasty things?

  And why are you using all of these styles of position: relative? On .
  Tags? Wow.

  In any case, just do.

  TD {}
  border: thin solid #B54221;
  / * position: relative; * /
  border-collapse: collapse;
  height: 100px;
  vertical-align: top;
  }

  I did wonder why so many styles of position: relative?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "jennlmont" wrote in message
  News:gomnst$4a4$1@forums. Macromedia.com...
  > Hi there. Just wondering if anyone has a quick minute to look at this
  > page and
  > Tell me how to get the numbers divs date to align to the top of the table
  > cell phone.
  > I had correct before, but made a few other changes: general cleaning of
  > html,.
  > browser/validation that came back with compatibility
  >
  > "Support for the top, the top of the text, middle, low values and of the low-text of.
  > the
  > Vertical-align CSS property is incomplete; These values may not produce
  > the
  > for effect.
  > Affects: Internet Explore 5.5; Internet Explorer for Macintosh 5.2 "
  >
  > Not think I deleted it then realized that it was necessary, he put back in...
  >
  > Now, it won't work, I tried many things and it is the second
  > time
  > It happened.
  >
  > http://www.oakcitygrille.com/cal_march_09.html
  > http://www.oakcitygrille.com/general_form.css
  >
  > Thanks in advance for your time.
  >
  > Jen
  >

• 450 HP: how to connect my laptop to Auntie sky set-top box with an HDMI cable

  piease tell me how

  Hello

  Your laptop has HDMI OUT and your decoder has ALSO HOMI out, you cannot connect two PORTS together, it doesn't

  work. It is the only one?

  http://www.honeytechblog.com/Tata-sky-plus-HD/

  Kind regards.

• Search menu drop down always on the top of the & blocks tapping annoyance of keyboard screen

  Hello

  I use the windows on-screen keyboard 95% of the time. And I would usually place in the middle of the window when in use. When I need to type in the search box, and even if the screen keyboard it is set to always on top, it always goes IN the drop-down search suggestions, which blocks my ability to keep typing. I have to stop typing and move the OSK to the right or the left beyond the border right or left of the search box or move it to everything at the top of the window or down out of the way the drop-down list. Then, this highlights the text that I already typed, forcing me to click at the end of it, or start over (once I moved the OSK out of his way). Even though I have disabled search suggestions still has a drop down menu which blocks the OSK (position/size/length of the search along the top box and the position of the OSK are where I love them bc of my poor eyesight). The address bar does the same. I want to know if there is a way to keep the search drop-down box UNDER the OSK while I type? It's a long question, I apologize, but it's a little wordy to describe. See the photo and I'm sure that you will understand what I mean. The OSK is always set to "Always on top" in Win 7 Premium

  Thank you for your helpful answer
  brand

  It looks like a work in progress for programmers. I wonder if this thread could be redirected to them? I'm ready for this mark as resolved for me personally, that the behavior of the drop-down menu 'old' shorter is easy {er} to avoid now and also provides suggestions less and less that I type in the query (which therefore relieves my annoyance).

  The OSK should, logically, remain on top, right? Ah even though it IS hard to read them with a keyboard in the way... this is defined as a conundrum for those that would, like me, to read both the helpful suggestions and the keyboard letters at the same time.
  

• What is the difference between A1286 Top case 2009-2012

  I want to replace the top box of my MBP mid 2012 non-retine.

  Every part of my Mac works fine, I am only looking for the top box (palmrest) and maybe one downstairs.

  So my question is: are they all the same (except for keyboard)?

  Search the list of interchangeable parts:

  https://www.iFixit.com

  http://www.PowerbookMedic.com

• Tabs on top

  I just downloaded Firefox 8.0.1. I use XP Professional service pack 3. Firefox Help on the tabs at the top says to go to options and click on the tabs on the top box to disable this feature. At home, it worked. Here click on the box isn't here. Tools/Options in the tabs or anywhere else.

  Hey kimberk,

  Try right click in Firefox header, upstairs next to the tools, assistance, menu etc. This will bring up a context menu that offers the option "Tabs at the top".

  I hope this helps!

• What can I do when I'm there on the permissions in the top bar I get yahoo search results and not Authorization Manager.

  I'm putting my authorization manager info, but when I put on the permissions in the top box I have yahoo results research and authorization manager is not started. How can I get another way to authorization manager? Or how to get the address bar to work as it should? I look forward to a response.

  Enter Subject: authorizations in the URL/address bar. (Requires the colon and no space)

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.