Four edition of CPU time dv7t

Similar Questions

• Video editing in real-time, is it possible?

  Hey all, first of all thank you for reading this post.

  I would like to know if it is possible to apply some effects (especially twixtor, some warp stabilizer, color correction) and see the result (perhaps at lower resolution, resolution 1/2, 1/4), without rendering, but the liquid (to check the image goes accordingly with audio, to see the speed change is control with twixtor, etc...)

  I have a laptop that is supposed to be powerful: i7-4800mq, 16 GB of RAM, GTX765M, and (perhaps it s the reason why I Don t see the expected result) a hard drive 7200 RPM (SATA 3 GB/s, with 64 GB SSD mSATA capture)

  I use the video recorded mainly a gopro 3 black and first pro cs6, sequelae. 1080, 60 frames per second.

  I want to change my computer because I have to do a lot of editing of short videos, a lot of twixtor and can´t waiting for renderize whenever I change something and the bar changes from green/yellow to red.

  I would like to know:

  -If it is normal, with my computer

  -If you intend to buy a computer, instead of asking which component you should buy part of (of course you can), what you think of these two:

  option 1:

  I7 - 4790 K 4.0 Ghz

  MSI GeForce GTX 980 Twin Frozr OC 4 GB GDDR5 V

  Motherboard: MSI Z97 Gaming ACK 9

  Hard drive:

  • Seagate Barracuda 7200.14 3 TB SATA3 64 MB
  • Samsung 840 Evo series of SSD SATA3 500 GB (250 GB x 2 In raid 0)

  Kingston HyperX DDR3 2400 16GB PC3 - 19200 2x8GB CL11 Savage

  
  

  Price: approximately 2100 euros

  option 2:

  4790 K I7

  2 x GTX760 2 GB of GDDR5 memory

  Motherboard: GA-Z97X-SLI

  Hard drive:

  - 2 x HDD 1 TB 7200 RPM Seagate ST1000DM003
  

  -2 x SSD 120 GB Kingston V300
  

  16GB DDR3 1600 MHz (2x8GB) HyperX blue Fury series HX316C10FK2/16

  Price: about 1600 euro

  I know that I can use proxyes, but I think proxyes with less resolution gives problems with the stabilizer of warp and with less fps gives problems with twixtor.

  Don't you think that I'll be able to do the video editing in real-time with these computers? Thank you very much!

  GoPro black 3 is very slow on CS6. Twixtor is poorly threaded and does not support CUDA acceleration.

  Re option 1:

  • The 980 is way exaggerated, a 760 is more than enough.
  • 16 GB memory isn't enough, you want 32 GB.
  • Forget the EVO. It's far too slow with the Scriptures. Get a 850 Pro.
  • Get a few more HARD and SSD drive to improve disk i/o.

  Re option 2:

  • A single video card is supported under CS6. Go on the other.
  • 16 GB memory isn't enough, you want 32 GB.
  • a single 120 GB SSD for media cache and previews is very low. Better to use 256 GB Samsung 850 Pro.

  With GoPro material and even with the improvements suggested (more memory, better disk i/o) that you will still experience slowness, jerks, unstable behaviour, because of the quad core CPU.

  See Page Tweakers

• My CPU usage climbs to 100% & an application called iexplore.exe uses 99% of CPU time.

  Original title: iexplore.exe

  When I activate "Task Manager", my CPU usage climbs to 100% & an application called iexplore.exe uses 99% of CPU time. This slows down my computer. I can turn it off without causing other problems?

  After restarting in safe mode and then restart in normal mode, all is back to normal. Thank you!

• mozcrt19.dll uses random high CPU time, stop loading Web pages

  I installed a fresh copy of FF 8.0.1, when I start FF for the first time and after a few minutes, Web pages stop loading, then FF crashes, I check the process I saw firefox.exe uses almost all my CPU, with Process Explorer, the file MOZCRT19.dll uses all my CPU and Web pages don't load more, then after a few minutes FF became normal, after a few minutes, once again MOZCRT19.dll uses all my CPU and so on...
  I have tried disabling all my modules without any advantage,
  also, I have disabled all the plugins with no advantage,
  screenshot of MOZCRT19.dll http://img26.imageshack.us/img26/5888/ffhang1.jpg
  Please help me to solve this

  I have the problem, if you have of SPEEDbit Video Accelerator
  Uninstall immediately, not just out of the program, because it will leave some of the services that are running, and I recommend to use an uninstaller like
  Your Uninstaller! 7 , because it allows to uninstall everything related to the program.
  If this solves my problem.

• In windows Server 2003 R2, standard edition, its CPU usage showing the use of 100%

  I have windows Server 2003 R2, standard edition, in recent weeks its CPU usage showing the use of 100%. While treated cheking, a process called 'System', showing the CPU from 97 to 98%, we have stopped other services one by one like Trendmicro and backup but none advantage, can you please help us?

  Hello

  Since you have a problem with Windows Server 2003, you can ask your question in the TechNet for Windows 2003 Server GENERAL forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Four edition of ENVY 17 t-j000: REPKLACING FAN DEAD

  the laptop fan is dead and I have another to replace it.  How to Bay fan, do I approach the bottom of the battery or do I have to go through the top behind the keyboard

  Come the background:

  Repair manuals

  See pp. 85 and many procedures leading to it. You have one of the most complex and most involved laptop disassembly projects there on your hands. Good news, you don't need to remove the motherboard but I remove and clean the radiator and apply the new Paste on the cpu while you're there.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Four edition of HP Envy 15 t-j100: hinge Brokan on Hp Envy 15 t-j100

  I have a Touch smart cell phone Hp 15 t-j100 quad edition cto and have just noticed that the right hinge is loose or brokan and I heard something rolling inside of it. small looks like maybe a screw or something? I have read many post about people with my laptop model are having the same problem.  Can help you Hp said my warranty is up, but when I check on my warranty status says its still in warranty?

  Went to the HP hardware chat site and explained my problem of hinge for the tech there. She checked my warranty status and confermed that is has been active right now. If HP send a carrier to pick up my laptop for repairs in a few days. I'm happy thank you

• Change screen on HP dv6 four edition 6153cl

  Hi guys,.

  I have a quad edition 6153 cl Dv6 and I start to notice a few very white dots (3 or 4) on my screen. I can only see them when I open a page that has "white". Does this mean I have to replace the screen very soon?

  Also if I need to replace the screen it'll work if I replace it with a 1080 p resolution screen? (720 p now there).

  Thank you

  Hello

  The screen cannot die, but if you want, here's a list of screens supported. You may need to buy more pieces, not just the screen:

  Display Kit hinge (including the media and the hinges of the screen left and right) 665313-001
  (4) ' ' ' ' Billboard ' ':
  15.6-inch, FHD, LED, anti-reflective display panel 665335-001
  15.6-inch, HD, LED, display panel BrightView 665334-001
  (5) kit cable view (including the display panel cable and cable webcam/microphone module)
  For use only with models of computer with a FHD display Assembly 665305-001
  For use only with models of computer in the shadow dark and grey steel finish 665304-001

  The next book will help you if you do it by yourself:

  h10032.www1.HP.com/CTG/manual/c03015537.PDF

  Kind regards.

• Pavilion dv6t-7000 QE: upgrade factory ssd for the four edition dv6t-7000

  I have a laptop DV6T - 7000 CTO Quad Edition, 64-bit Windows 7, I had configured with a 160 GB SSD from the factory.  It works great, very fast, but I want to move to a larger ssd. In looking at a crucial or sandisk pro now, 480 GB or more.

  My question: if I use the cloning software that will copy everything to the new ssd, included windows operating system?

  I really want to do a complete reinstallation of the operating system that I don't see the need for it. Most likely I will modernize in any case next year to win 10, or whatever they called.

  Somehow this update seems easy enough to do, but I want to anticipate any potential isses before we start.

  What do you think? This who should I look for? If there is a problem, can I pop just my current ssd right in?

  Thank you

  Yes he clones above. Choose a proportional resizing of partitions. And Yes, if the clone does not work, you can always pop concert the 160 original. I use Acronis True Image Home 2014 for cloning and it works fine. Some versions of the Samsung 840 and 850 equipped with a migration kit which has the SATA Adapter USB and a CD containing software for disk cloning.

  You can also buy a separate kit:

  http://www.crucial.com/USA/en/ctssdinstallac

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15-n268sa CPU time more than 90 just with running windows 8.1?

  Hello, I've had this laptop for 2 days and today under its weight all sorts of strange things. several times it has disappeared from the black screen (not arrested, just as he had torn out battery and a loss of power). I got a message that there was a problem and windows were stopped and gave an error like 0xa0000001 or something.

  but before that I have had that I was worried. some of the first things I did was to install some programs to reference. Speccy, cpuid, gpu - z. CPUID doesn't show the time, but speccy showed the hearts of the processor to make everything running at 80-90 with windows just sit and do nothing. It highlights something more than 80 in red. GPU - z shows the double with similar graphics, but about 5 degrees more down time and watch the map amd radeon hd 8670 M in much less time. a fan inside seems to be on, and when the time if abouve 95 seems to go up a gear. but I've seen speccy 106 c. time display!

  I think that's what's causing the laptop to blackout and restart; time to go over 105 for any time at all. In short it works under windows, with sometimes even with power supply plugged into the laptop screen dimming. but try and run something, such as an internet connection, connect what either in the usb which is powered by the laptop ports, or browse the web - even not watch video or streaming just google search! - and the time jump up to the middle of the 90 or more.

  Please no spamming no unnecessary links on the cleaning of the ventilation openings. its nine bought 2 days and it looked like when I turned on. There is nothing to clean the inside, unless he left the factory in this way.

  is there a way I can force the fan on permanently full or close to it (the life expectancy of the fan against the ease of use of the portable computer of balancing) since the habit of fan noise bothers me as much as this thing will melt. its under warranty for another 362 days but that is not the point. im getting a laptop cooling thing (I had to buy an already, but its kind of asthma, but it hit off time 2degrees sometimes idling). times are more than 90 again I better post this before can't the black abyss. Help!

  If your PC running too hot and very hot to the touch in less than half an hour of basic use, then it may be an unwanted material.

  I suggest that you call the HP technical support and log a ticket your PC or their replacement after confirmation of the fault.

• Reference Dell PowerConnect 2848 OID for CPU time and memory

  Hi all

  This is my first post in this forum. I searched all the messages that can solve my problems, but I could not find so if there is already an existing post and I couldn't find it please guide me to it.

  My case is. We have a few Dell PowerConnect 28xx switches in our network. We want to monitor things like the CPU, the temperature, the use of the RAM usage. We use Solarwinds IpMonitor monitoring tool. I downloaded the MIB, I could find the download of Firmware from Dell drivers and downloads page. I went through the entire MIB, but I couldn't find an OID for the foregoing.

  So if anyone can help me please what OID is used for usage of CPU and RAM temperature it will really help me.

  Please let us know in case we need more information on my side.

  Thank you

  Frank Moreau

  I did use SNMP on the 28xx but here are some various sensor OID, I used for the N-series, as well as some older models Powerconnect.  I don't know if they will work for the 2xxx, but you can try one or two and see if they work.

  N - Series (FW 6.2 and later versions) temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.0
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.1

  62xx (3.0.x.x firmware or later-, some may also work with 2.x firmware)
  Temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.4

  Are the OID to use CPU for N-Series switches
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (table for the following...)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (index)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (name of the process using CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% CPU used by the corresponding process)
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 (cumulation of all the activity of the CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 (CPU utilization shows 5 s, 60 s and 300s).

  OIDs memory
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2
  Power supply OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.3
  OIDs of fan
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.5

  35xx (2.0.x.x or later firmware)
  Temperature OID
  . 1.3.6.1.4.1.89.53.15.1.9
  . 1.3.6.1.4.1.89.53.15.1.10
  OIDs of CPU
  . 1.3.6.1.4.1.89.1.6
  . 1.3.6.1.4.1.89.1.7
  . 1.3.6.1.4.1.89.1.8
  . 1.3.6.1.4.1.89.1.9
  OIDs memory
  . 1.3.6.1.4.1.89.29.11.1
  . 1.3.6.1.4.1.89.29.11.2
  P.S. The OID
  . 1.3.6.1.4.1.89.35.5.1.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.3
  . 1.3.6.1.4.1.89.83.1.2.1.4
  . 1.3.6.1.4.1.89.53.15.1.3
  . 1.3.6.1.4.1.89.53.15.1.3
  OIDs of fan
  . 1.3.6.1.4.1.89.83.1.1.1.2
  . 1.3.6.1.4.1.89.83.1.1.1.3
  . 1.3.6.1.4.1.89.53.15.1.4
  . 1.3.6.1.4.1.89.53.15.1.5
  . 1.3.6.1.4.1.89.53.15.1.6
  . 1.3.6.1.4.1.89.53.15.1.7
  . 1.3.6.1.4.1.89.53.15.1.8

  for old firmware - if the 35xx above does not work:
  Temperature
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.9 (Celsius)
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.10

  I hope this helps.

  B

• Four edition of HP ENVY 15 t J100: ENVY 15t NIVIDIA graphics card problem

  Hello

  Today, I bought a hp envy 15t j100 quad edition energy star portable pc

  and he have NIVIDIA and INTEL stickers and materials but when I open the Device Manager

  I do not see the NIVIDIA only intel HD 4600

  Why NIVIDIA hidden

  or isn't there at all?

  is the problem of windows or your CV

  ??????????????????????????????????

  Hello

  I can't calrify that because it's a CTO machine and did you pay for the NVIDIA card option when ordering the machine? Pilot is on the site of support, sound as material is not on your machine.

  If no physical hardwre, 10 Windows cannot do anything about it. Now, my suggestion: talk to the place where you place your order and ask to give a COMPLETE listing of your computer. Part store lists only the options, not your machine.

  Concerning

• Time CPU time to run

  Hello
  11 g R2,.
  I CPU_TIME > query EXECUTION TIME (is there an explanation? What is wrong with my query?)
  
  Thank you.
  

  SELECT * FROM 
  (SELECT last_load_time,sql_id,(ELAPSED_TIME/executions)  MY_ELAPSED_TIME, (CPU_TIME/executions) FROM V$SQLAREA WHERE last_load_time >  
  sysdate - 33 and executions !=0 AND UPPER(PARSING_SCHEMA_NAME) ='SYSADM' AND last_load_time < sysdate -3 
     ORDER BY MY_ELAPSED_TIME DESC) 
  WHERE rownum <= 10
  
  LAST_LOAD_TIME     SQL_ID     MY_ELAPSED_TIME     (CPU_TIME/EXECUTIONS)
  
  
  17/03/2013     4rc7d8c0mvfm8     6041     6354
  17/03/2013     2sufx7w1ss560     94     88
  17/03/2013     faa9qaqqn3586     85     83
  17/03/2013     84qts98ghgkpp     66     63
  17/03/2013     d4ukyu9zqrxm9     59     58
  17/03/2013     0pxht20mjsw02     59     61
  17/03/2013     25djr7myzqyf4     59     56
  17/03/2013     67h6jjvmg4spw     54     55
  17/03/2013     bx6vfjc31xx89     52     53
  17/03/2013     b6mrdp9dcam6h     50     50

  What is the problem with my request?
  Kind regards.

  watch v$ sql.px_servers_executions vs v$ sql.executions

  PX_SERVERS_EXECUTIONS Total NUMBER of executions carried out by the parallel execution servers (0 if the statement has never been run in parallel)

• four edition dv6t-7300 CTO: is my CTO 7300 dv6t quad edition mSATA III and SATA III compatible?

  Hello!  I was wondering if my laptop is mSATA compatible III for my slot of the WSSD and also if it is SATA III for my regular SSD.

  I am in the process of upgrading a disk HARD 1 TB to an SSD of 500 GB for the primary and the replacement of the WSSD to a larger storage capacity.

  I'm also looking for recommendations for the 500 GB SSD and brands of the WSSD.  Thank you!

  Is my product number: C2Y45AAR #ABA

  Any help will be very appreciated!  Thank you!

  hankjlee74 wrote:

  Hello!  I was wondering if my laptop is mSATA compatible III for my slot of the WSSD and also if it is SATA III for my regular SSD.

  I am in the process of upgrading a disk HARD 1 TB to an SSD of 500 GB for the primary and the replacement of the WSSD to a larger storage capacity.

  I'm also looking for recommendations for the 500 GB SSD and brands of the WSSD.  Thank you!

  Is my product number: C2Y45AAR #ABA

  Any help will be very appreciated!  Thank you!

  Hi again,

  Your laptop supports SATA III Solid State Drives. I suggest Samsung Pro or Evo products. Here's the top of the line and even for a decent price.

• Anyone can comment on these two plans plaease... These decreases the cpu time

  Thank you I have marked the question as answered.
  
  Published by: SMY on July 14, 2009 11:36

  -What query works really faster? What query is less I/O?
  -Why did you change the mode of the optimizer? Why did you change the optimizer_index_cost_adj? Which suggest that one or two of them were incorrect?
  -What version of Oracle?

  With only two query plans, there is not much anyone can say. The optimizer expects the plan to run faster, but it's only because you said that you want only the first 100 lines and access to the index are much cheaper than what he thought. If one of those is bad, new guess of the optimizer is probably worse than his first assumption.

  Justin