FPGA disappear controls when copy and paste in VI

Similar Questions

• Translation problem click / highlight boxes when copy and paste slides from another project

  I am baffled by this problem because it doesn't seem wise. I opened a new project to record a simulation, and when I did, I copy and paste all the slides in the section in my "Master project" If you want to. After the dough, I noticed that all of the boxes, clickboxes and highlight, I had taken the time to carefully resize were all out of wack in terms of position. Here are the best, I opened a blank project and copy and paste the same slides... this time the click and highlight boxes were in the correct position. Any ideas?

  Thanks in advance,

  Neel

  Oh, 'in position '... I see...

  The project is bigger than the other? For example, the original perhaps to 800 x 600 and the new to 850 x 650?

  Positioning can then be turned off relatively...

  Take a few elements of the sample and note their x / y positions of the properties panel, in the first draft (under 'Transform' in CP 5.5).

  After pasting in the new, note these same x / y positions.

  Is there a significant factor?

  If this is the problem, make sure that the sizes are the same, make the dough, then expand the project later (and maybe everything will keep its anchors?)

  I have not seen that happen in new versions of CP.

  You can try to check "Keep the Proportions" option in the properties of the original, just in case where this helps to "compel the position" too... guess total...

• Spacing is introduced between letters when copy and paste text

  I use Adobe Reader X 10.1.1 on Windows Vista, but this problem applies to all users of Reader, that I tested it regardless of their implementation:

  
  When you open a text-under-the-page-image PDF file in Adobe Reader and then copy and paste the text, the spacing is introduced between the letters:

  For example, the word "test" shows as "t e st i ng" in the document text output, but that the 'test' on the original pdf.

  This affects 50% of the 100 000 PDF files in the collection, with between 10% and 90% of the words within those that show this phenomenon.

  The PDF files themselves are so impossible to search for the words in question.

  This does not occur when viewing and search PDF files in other viewers such as FoxIt or NitroPDF.

  Nor does occur when you use file | Save under. Text or display RTF or XML version.

  I can still reproduce this phenomenon on specific files or through the entire collection, on both my own system and with anyone else who opens PDFs in Reader.

  Any suggestions much appreciated.

  Hi André,.

  This problem is already fixed in Acrobat 11. Unfortunately, we cannot solve for Acrobat 10.

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• AE 2014 hangs when copying and pasting of the layers of styles

  So we found and reproduces a CC AE 2014 Crash on several desktop computers.  When you attempt to copy a layer style to a layer and pasting to another layer (we tested with .png, .jpg and text) AE crashes.

  AFTER EFFECTS CAN'T CONTINUE: SORRY, AFTER EFFECTS HAS CRASHED.  FOR AFTER EFFECTS USING... (0::42)

  We found the work around for now, if you put ANY layer in the second layer style, then you can paste the style of the first layer to the second. Essentially, you must tell AE that the layer you want to paste a style is allowed to have a style.

  Anyone else having this problem?  I can tell you that the computers we have tested this on a Lenovo and Dell.  The Lenovo running a Nvidia graphics card and the Dell an ATI.  I can post more stats computer if necessary, but that doesn't seem to be the problem.

  This bug is fixed in the next update:

  http://Adobe.LY/1pFGGRE

• 5.24.13 - copy and paste a web page by right-clicking in Word

  I am running Vista. All sudden several months ago when copying and pasting a web page by right-clicking in Word, all glued were HTML code instead of the desired content like images, text, pictures, layout, etc.  Maybe I inadvertingly changed a setting but am not sure.  Can you help me? Thanks for any idea or suggestion.

  Hello

  As I tried today with MS office 2013 word it works well. You mean it's looking like

  First name:

  You want to say what version of MS office that you are using?
  The browser you are trying to copy HTML pages?

  I suggest you do

  • Open a web browser such as Windows Internet Explorer by clicking on the button 'Start' at the bottom left and double-click on "Internet Explorer" in the list of programs.
  • View the Web page that you want to copy, then click on the tab 'Edit' at the top of Internet Explorer
  • Click "Select all" to highlight all the content of the Web page, then click on the right button of the mouse and select 'Copy' in the menu dropdown. This copy of the entire Web page in a temporary memory Clipboard.
  • Open a blank Word document by clicking on the "Start" button, choose "All programs", click on "Microsoft Office" and clicking on "Microsoft Word."
  • Click on the tab 'Edit' at the top of the screen of Word, and then choose "paste special."
  • Select which option paste best suited to your needs. For example, the option "Format HTML" will paste the page copied with all hyperlinks, images, and text formatting intact. "Formatted text" option will stick to the text of a Web page without any of the original, separators of section columns or other formats.

  Click 'OK' to copy the Web page in the Word template.

  Hope this helps, if same problem restore your system to an earlier time

• Copy and paste text Menu of footer - crashing

  When copy and paste text from a breakpoint page footer menu to another, it causes an accident. Any way to prevent this?

  Hi jrhinson347,

  Instead of copying and pasting the text individually, please try right-click on the menu bar, and then select the option ""copy text formatting to > all breaking points " and let me know if it works."

  Thank you

  Ankush

• Bug? Quote simple copy and paste from MS Word

  I don't know if this is a bug or not. Whenever I have a copy of MS Word with single quotes (for example, it is just a 'test') and put it inside an af:inputText field, save the value in a Java bean and then retrieve it for editing, single quotes become a reversed question mark (i.e., it's just a ¿test¿) this is only the case every time I have copy the text from MS Word. Copy from Notepad or Wordpad, but also enter manually the text not produce the bug said.
  
  Does anyone have an idea about this problem?
  
  Thank you.
  
  -rolly

  ... and no, I don'think it's a bug because you are facing a character conversion, which for example also happens when copying and pasting from Word to Powerpoint

  Frank

• When I try to highlight the text my cursor turns into a hand/fist who just drag the page. I need to be able to highlight, copy and paste text.

  I have to be able to highlight text on web pages, copy and paste. But when I click on my mouse left button, he made a hand / fist which simply dragged the page.
  How can I get to where I can highlight text?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My keyboard loses functionality when I try to leave comments on Facebook. Delete, BACKSPACE, apostrophe and cut, copy and paste are disabled.

  My keyboard loses functionality when I try to leave comments on Facebook.

  Delete, BACKSPACE, apostrophe and cut, copy and paste are disabled. This only happens in the comments, no functionality is lost in the mail or status updates.

  I disabled all my Add-ons and restarted Firefox and the problem persists. I've updated modules, restarted Firefox and the problem persists.

  I updated Firefox and that made no difference.

  I deleted the cookies and cache and still no luck.

  SOLUTION: I disabled the add-on Grammarly Lite and this seems to have solved the problem.

  I informed the Facebook of the show. I can't find any information about this problem in troubleshooting of Facebook.

  I can't reproduce this problem in Internet Explorer. All functions work fine.

  I have the same problem on another device that is running Windows 7 Starter and a laptop running Windows 8.1.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Shockwave Flash 15.0 r0
  Shockwave Flash 11.5 r502

  Having multiple versions of a program can cause problems.

  Take uninstaller from here:
  Uninstall Flash Player | Windows
  Uninstall Flash Player | Mac
  Reinstall the latest version.

  Flash Player v15.0.0. 239 http://get.adobe.com/flashplayer/

• When I copy and paste a web title, why does more extra code ("see more: article link")?

  I'm used to be able to copy a title and only get the title. Example: "Nuncio urges bishops to attend the faith to the youth."

  Now, this is what happens when I copy and paste: Nuncio urges bishops to witness to the faith to the youth - see more at: https://www.osv.com/OSVNewsweekly/ByIssue/Article/TabId/735/ArtMID/13636/ArticleID/16393/Nuncio-urges-bishops-to-witness-the-Faith-to-young-people.aspx#sthash.D3iYiB2H.dpuf

  I don't want to link and a code extra stuff. I want the preference goes out. Help, please!

  I marked and copied this;
  Nuncio urges bishops to witness to the faith to the youth

  That's what was pasted;

  Nuncio urges bishops to witness to the faith to the youth - see more at: https://www.osv.com/OSVNewsweekly/ByIssue/Article/TabId/735/ArtMID/13636/ArticleID/16393/Nuncio-urges-bishops-to-witness-the-Faith-to-young-people.aspx#sthash.D3iYiB2H.nNtj5A3E.dpuf

  It has something to do with the web page itself.

• When I copy and paste a web address into an e-mail he did not point out to allow a simple click on the receiver. Is there a way I can do this in Firefox?

  It is quite a common event to send friends a thread in a web address for interesting articles or videos (Youtube URL). To make current means that you do a copy and paste into the email. When I was with Aol address presented in bold that allowed the recipient to click on the address to be connected instead of making a copy and paste into the address bar. Is there a way that this can be done in Firefox?

  Thanks a lot, I had this problem for so long now. Yours is the only solution that makes it clear how to solve. Still don't understand not why it does not automatically in Firefox as it does in IE but good is not a big constraint... and it does not use new IE! See you soon

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• When I copy and paste, the results are stripped of formatting.

  It's weird, I can copy and paste, but all pasting is wiped clean of formatting, underlying formulas (in Excel), hyperlinks, etc.  This happens in all programs (Word, Excel, gmail) and when the copy/paste between programs (Word to gmail).
  It must be a global setting of XP SP3.  I tried to roll back the computer a week, but the problem exists (not sure when it started).
  Any ideas?
  Thank you

  When you paste that you get a symbol down at the bottom that gives you paste options and select keep source formatting?

  http://www.excelforum.com/Excel-General/764099-copy-paste-losing-formatting.html

  This link mentions him "style" of excel, find out what the problem described is the same as yours. "

  http://help.WUGNET.com/office/copying-tab-loses-formattingftopic-1165433-DAYS0-orderasc-8.html

  This link mentions him ' theme'of the spreadsheet. "

  http://www.howtogeek.com/HOWTO/28478/copy-and-paste-in-Outlook-without-messing-up-your-formatting/

  He mentions how to keep the updated source in the form an email

  http://answers.Microsoft.com/en-us/Office/Forum/Excel

  Finally, if none of the help above, it is the link to the forum office.

• When online, it takes more time to copy and paste something.

  Original title: copy paste

  When I'm online, while copying and pasting. Since the installation of the version of xp blade, it takes longer to copy paste something. I want to copy paste to work way is use too, faster and not loading in the bar each time trying to copy paste search something online? Thanks Guy

  Hello

  1. what browser do you use?

  2 are you facing the question that when you're online?

  If you use Internet Explorer (IE), then you try to optimize IE and check if it helps.

  For more information, please see the following article and check.

  Internet Explorer is slow? 5 things to try

  Check if the problem occurs in safe mode with network and let us know the results.

  A description of the options to start in Windows XP Mode