FPGA gives error
I m using crio 9012 with 9103 Chassis.
When I start my application it shows me this error. I don't get what to do please tell me as soon as possible. error is given like this-
error 1026 was held to invoke the node in nirviInteractiveAllowsEdit.vi-
> nirviDownloadAndRun_cRIO - 9103.vi-> niFpgaCompileDownloadRun.lvlib:
cdrDownloadAndRun.vi-> niFpgaCompileDownloadRun.lvlib:
nirviCompileDownload.vi-> hardware_template.vi
Please answer me
Hello
Can you tell us exactly when you get this error? Are get you during the deployment of your project? Can you provide a screenshot? This occurs when you deploy your VI RT?
What version of LabVIEW are you using?
What version of NI RIO do you use?
What rev 9012 do you have? (quelle partie numéro 7alphanumeric valeur-suivi d'un "-" et deux chiffres) you have)
9012 revH and most require at least LV 8.2.1 and RIO 2.4.1 but may also require a patch dependening on what version of LabVIEW you have. If you Rev G or earlier, then ignore the following:
The patch that I'm referring to is listed here. You will only need the patch if you use LV 8.2.1, 8.5, 8.5.1 and RIO 3.0.1 or earlier. For example, if you have 8.6 or later, you do not have the patch. Or if you have 8.5.1 and RIO 3.1 or later version you don't need the patch. If you 8.2.1 and 8.5.1 you will need the patch.
Kind regards
Andrew
Tags: NI Hardware
Similar Questions
-
Open vi FPGA gives error xnode (Lv 8.6) (not executable)
Hello
I wrote my description of the error also here: http://forums.ni.com/ni/board/message?board.id=280&message.id=5055&jump=true#M5055
When using "run vi on the development computer" I get an error broken pointing me to the "open FPGA vi function", the problem
be 'an xnode object is not executable. I have not found this problem under discussion anywhere, I tried uninstalling FPGA and Rio soft.
and resinstalling, but not help. All ideas are welcome.
Thank you
Staffan
Hello
JMota wrote:
"Here's something to try. I think that the configuration of your FPGA target to run on the development computer (with simulation of IO) will not work if you try to run your host VI on RT. test by dragging the VI to my computer and run it from there. Altenatively, you can reconfigure your FPGA target for not performing on the development computer (what used to be called emulation).
Hope that explains why the VI has broken. »
And it solved the problem - works fine now - if this issue is resolved.
Staffan
-
On a windows 2003 R2 SP2, gives error 1053 SNMP service startup
On a windows 2003 R2 SP2, start the service SNMP gives error 1053 (below)
In the event log are event ID: 7000 & 7009 back (below)
Already tried: https://support.microsoft.com/en-us/kb/886695 (check the "allow service to interact with desktop").
I have also run the Windows updates for all high priority updates, replaced the files %windir%\system32\snmp*.* with those of another R2 SP2 server that is not the problem (after rename the original to the *.old files & copy the same files in the folder DLLcache so SFC would stop interfering ;)) and checked for other errors that may show a reason for this - the only thing that I can connect to it) , it is that services IISAdmin & GoogleUpdate (gupdate & gupdatem) having the same problem, but unrelated to seams...
TNX in advance for any response.
Kobi
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?
Hello
You are unable to download the updates?
Try the following steps to resolve the problem:
Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.
Check out these links:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
my computer gives error 80080005. Can not find new downloads.
Who can help me. My computer gives error 80080005. He can not find new downloads.
I used Windows Vista Edition home premium.Peter
Here's a huge thread on the same topic. It might be useful. http://social.technet.Microsoft.com/forums/en/itprovistaapps/thread/21e0dd42-44AE-4E07-9A9A-b0a3263345ec
Marin
-
Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3
Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: sync clock error
Validation code: 10
Code of Validation caching: n/a
Windows product key: *-* - XC4Q9 - W7RTD-7Q8G6
Windows Product Key hash: Py7sqDcPBx6etfYqog5bPl/YZ9E =
Windows product ID: 76487-OEM-2211906-00826
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 5.1.2600.2.00010100.3.0.med
ID: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: n/a
Architecture: n/a
Build lab: N/A
TTS error: n/a
Validation of diagnosis: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a
Version: n/aWindows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: Yes
Version: 1.9.9.1
WgaTray.exe signed by: n/a, hr = 0x80004005
WgaLogon.dll signed by: n/a, hr = 0x80004005OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-230-1Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95} 1.9.0027.0 5.1.2600.2.00010100.3.0.med x 32 *-*-*-*-7Q8G6 76487-OEM-2211906-00826 2 S-1-5-21-1232634059-1876962941-2206964983 Sony Corporation ,VGN-AR11M Phoenix Technologies LTD. R0130J6 20060626000000.000000 + 000 Sony Corporation, Sony Corporation, Sony Corporation 2BD13F07018400FE 0809 0409 New Zealand Standard Time(GMT+12:00) 0 2 Corporation Sony VAIO VGN - AR series 109 License data-->
N/AWindows Activation Technologies-->
N/A--> HWID data
N/AActivation 1.0 data OEM-->
BIOS string matches: Yes
Marker of the BIOS string: 1FF90:Sony Corporation | 1FF90:Sony company ITCNC
Marker of OEMBIOS string. DAT: Sony Corporation, Sony Corporation, Sony CorporationActivation 2.0 data OEM-->
N/ACheck your region settings, Date and time in Control Panel - you are a clock synchronization error.
-
request lost post on window for e-mail folder
I post a request on Windows Live Solution center about 27 July give my email name - and request still pending, not found or even open window Live Solution gives error!
the application in question was: when I put in order my window live folders mail had become unstable, I remove a double folder which appear empty, I moved subfolder of a folder and subfoulders lost.
I've lost Business-Optus DSL-city of Luigi Swan - Bank - various - Computer.They contain information that was not save on my important document
My request was if possible to recover them. Happened this week is so cool to be given there.
Thank you
Luigi
Hello
The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=10
-
shared folder t could not access gives error that you have not permission to use network resources
folder t couldn't access gives error that you have not permission to use network resources while I connect with administrator
Hello
1. were you able to access the folder shared earlier?
2. don't you make changes on the computer before this problem?
3. What is the full and exact error message?
4. how the computers are connected?Please answer these questions and provide us with more information. This could help us help you better. However, you can view the Sub articles that may be useful.
Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".
http://support.Microsoft.com/kb/913628You cannot access shared files and folders or browse computers in the workgroup with Windows XP
http://support.Microsoft.com/kb/318030 -
Operating system does not start; F11 gives error.
HP Pavilion dv7
0xc000000f error code
-does not start the o/s
-not boot to safe mode (or whatever it is)
-System gives error F11 recovery
-friend did not restore system cd
-OS is Windows 7
I removed the hard drive and slave it to my office (using 2.5 USB cable). The files are accessible except the \USERS directory is MIA. If I can see the C: and D: (recovery partition)-
Can I run the program on my desktop computer to create the recovery CD? (faster you proceed your order/delivery/arrival)
Other suggestions?
Thank you...
ACETech says:
p/n: NM295UA #ABA
Installation media (recovery dvd) was not made by the user. That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office). Thanks for the info, I can't do that.
Will be there without you say the o/s? It is not sure that vista or 7 32-bit or 64-bit.
Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory. It of funny, just might be blown away...
It's Windows Vista Home Premium 64-bit with Service Pack 1.
Best regards
ERICO
-
Windows Search 4.0 service used with XP Professional SP3 gives error ID: 3100
Windows gives error ID search service: 3100 category: Gatherer
Can not initialize filterhostproces. Will be stopped.
Details: Invalid access (0 x 80070006)
It seems to be the cause of my computer is very slow sometimes.
I recently also received a blue screen
1 stop (0 x 00000024) Internet suggested that this could be a NTFS problem
2 stop (0 x 00000077)
I don't know if there is a relationship. Could this be a virus? I use Bitdefender and it gives no alarm.
Hi Joost23,
The question associated with Windows install, I suggest you run the patch from the link below: Windows search does not work and research is slow or stops: http://support.microsoft.com/mats/windows_search/en-us
If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.
Follow the steps below to uninstall:
a. click on start
b. click Control Panel
c. Select Add or remove programs
d. place a check on 'Show updates'
e. you will see Windows Desktop Search 4.0 and uninstall it.
Reinstall back, you can see the link below:http://www.microsoft.com/windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx
For the problem with the blue screen, you can check the link below: you receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR": http://support.microsoft.com/kb/315266
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Unable to turn on windows defender gives error
Unable to turn on windows defender gives error
Hello
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
I try to run windows update and it will not update gives error code 80070005
I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?
Hello
1. which Microsoft Fixit did you?2 have you installed new hardware or software before the show?
3. who is the antivirus installed on the computer program?
4 update you are trying to install?
5. are you logged on as administrator on the computer?
If this isn't the case, I suggest you to log on as an administrator and check for the issue.Method 1:One of the other reason for the 80070005 error is caused by software running on your computer security.Temporarily disable the security software on the computer and see if that makes a difference.Disable the anti-virus softwarehttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:I suggest you perform the steps described in the article:Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
Method 3:Perform a clean boot, and then check if it helps.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
See also:Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesI hope this helps. -
Windows updates give error 0 x 80096001.
Original title : Automatic updates mean that windows cannot check the updates.
Try to run windows updates give error 0 x 80096001.
Runs the tool Windows gives the same error.
Did not work for a while, no miracle I can find work.
HelloMethod 1:
Run the fixit given in the following link and check if it works.This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/322756) how to back up and restore the registry in Windows
Method 2:Perform the clean boot and check updates.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Method 3:
Run the Analysis System File Checker and check if this solves the problem. See the following article to do the same thing:
http://support.Microsoft.com/kb/929833I hope this helps! -
Windows mail gives error when you try to send 0x800ccc0e
Windows mail gives error when you try to send 0x800ccc0e
Check if you can access your e-mail via webmail. If it works fine and that you always have problems in WinMail, then delete your account e-mail, then compact and repair the database (www.oehelp.com/WMUtil/) and then add your account to e-mail back again. Often, this solves these problems.
Steve
-
BlackBerry Smartphones Linkedin app gives error loading module
Links in app gives error loading module in 9300 curve and after you have uninstalled it my curve 9300 has started to freeze at the navigation with a white screen... someone can tell me how to freeze screen resorve white!
I just reload my os again and his normal work
Maybe you are looking for
-
How to uncreate web console font size?
I was able to change the fonts to display marup elegant through addon etc.Here is the code@namespace url (http://www.w3.org/1999/xhtml);@-moz - document url ("chrome://browser/content/devtools/markup-view.xhtml"),URL ("chrome://browser/content/devtoo
-
Saya mau tanya tentang Saya pengguna BB 9780, BB ID. Saya kan dulu belum connection BBID dan sudah aktif BBM, dan setelah ITU saya connection BBID when kontak saya sudah ada banyak BBM. Pertanyaannya: Past kontak saya kesimpen di BBID when kontak say
-
Smartphones BBM blackBerry contacts
My husband recently changed between Blackberry and IPhone and is no longer using the service Blackberry/BBM. It will disappear from the list of BBM contacts on the devices Blackberry who had listed him as a BBM contact?
-
League of legends is not compatible with my computer? Help?
Hello OK, so I've been using League of legends since December and everything was going well until I did the last update on my laptop. Whenever I did, it wouldn't show a launch screen. I tried to uninstall and reinstall and still not working. I ran th
-
Hi, I would like to know if is possible from Windows 8 to automate the process of restoring a driver installed in Control Panel > uninstall a program (sorry if we don't want the exact terminology, I use the Italian version) at startup. I tried to use