Fractures of fatigue on the Satellite P100-423

Hi all

This is my first post here.
The hinges on my Satellite P100-423 have always been fairly rigid. Thus fractures of stress now appeared on the back of the lid near the hinges.
I bought in Nov/06 and it seems to be now out of warranty.
I would appreciate any advice on what I can do about it or how to get it fixed.

I totally agree with codes for the ASP must replace it and I think that this plastic cover should t be too expensive.

If you n t know how to communicate with ASP, then please check this database:
http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

Good luck

Tags: Toshiba

Similar Questions

  • Satellite P100-423 - RTC battery replacement

    I'm happy enough to replace the CMOS / RTC on Satellite P100-423 battery because the device is out of warranty and the battery needs to be replaced.
    Le-423 is a build of Costco and not much found after the mandatory, manual Google and research forum.

    Can anyone recommend a type satisfying to do this, no clue on the former.

    Thank you

    Hey,.

    Are you sure that the RTC battery is replaceable?
    I ask this question because as much as I know it is not possible on all s models and if it is replaceable you can find the specs on the battery itself if you disassemble the laptop.

    Normally, this battery can be charged if you leave the AC/DC adapter plugged in for 24 hours. Have you already tried?

  • Satellite P100-423 - warranty about to run out

    I have a satellite p100-423 which a failure of the LCD screen.

    I've registered this with toshiba and was offered an extension on my warranty to three years.

    These three years are on Sunday. I tried to use the online system that simply reports that my one year warranty has expired.
    I called help lines and a response service said to call Monday.

    Then
    1 - How can I do a warranty applies within three years?
    2. I can't find the evidence of the extension (but maybe it's because my machine is broken), I had hope Toshiba would have a record of it. If Toshiba say through their online system that my warranty has expired after one year, how do I claim on the three years a. ?

    Hey Buddy,

    Have you already contacted an authorized service provider? The ASP can normally repair laptop warranty also check the warranty time.

    It is difficult to say at this time what will happen but I'm sure that if you speak with the ASP they will help you as much as possible, and if your laptop is under warranty, the repair should be free.

    By the way: Here you can find the nearest authorized maintainer:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    If you have more questions or problems, you can post here once again! :)

  • Try to get the HD-DVD player to work on the Satellite P100-463

    Hello world.
    I bought this baby the weekend and since I am struggeling trying to get HD-DVDs to work on it. I added the HD_DVD xbox 360 drive, but Power DVD Software Advisor continues to say that the graphic card 9Geforce Go 7900) drivers must be updated to read HD-DVD content. Now, there is no available such as newer driver installed (84.0?)

    Can someone please advise if the card supports protection hdcp anyway? Maybe my problem is another source.
    Thanks for the tips.

    Wait do you use player designed for the Xbox in the Satellite P100?
    Hmm, I m surprised that this device is compatible with the Toshiba laptop.
    Anyway, as far as I know you need a special DVD player to play and watch HD-DVD on the laptop.
    A simple WinDVD does not support the new HD-DVD.

    By the way: I know a Toshiba model that shipped with the HD_DVD drive.
    It was a Qosmio G30 DVD HD model.
    I found a new Nvidia GeForce Go7600 8.3.2.7 Version graphics card driver update in the download section of driver on the Toshiba site
    But I put t know if it s compatible with your card...

  • Question about upgrading RAM on Satellite P100-423

    Hello

    can someone reassure me I'll buy the correct RAM and the best for my 2 Satellites. One is the P100-423.
    The other is Satellite Pro P100.

    (1) can I use modules of PC2 5300 DDR2 SO-DIMM 200 pin - 667 Mhz on both computers.
    I want to buy chips to 4 x 1 GB (all the same), so both will have 2 Gig ram PC.

    (2) I saw the bullets above with 533 Mhz, but told me I can use or 667 Mhz. Is this correct?
    667 Mhz would be faster and better is not it?

    (3) some chips are also designated PC2 - 4200 - instead of PC2-5300. Again, I can use either?

    (4) Finally, I always thought that it was better for if adapt to 2 memory chips to live the same size - that is why I want to use 2 x 1 GB chips.
    Yet, I was recommended to mount 1 x 1 and 1 x 2 GB in each pc.
    I know that IE a total of 4 GB is theoretical only 3.25 GB is possible.
    But asymmetric training will offer much greater performance on balance training 2 x 1 GB. ?

    Thank you very much for all the advice offered

    Robert

    With the help of RAM slower is possible. I have another laptop to work with the iso 4200 5300. It works ok.

    However, using the exact speed is better because it gives the best performance. Your system calendar is set on those memories.

    However slower modules, but more RAM still will give you better performance.

    3G seems to be the max for Vista-32. The imbalance is obviously not optimal, but I expect that the performance is better with 2 GB.

  • Update on the Satellite P100 (4200 RPM at 5400 RPM) HARD drive

    I had my laptop game Satellite P100-347, abandoned for a while now and want to give it to my little brother. This laptops come with 4200 RPM HARD drive and I would like to know if it is upgraded to a 5400 RPM / MIN 320 GB finally fails the system or am good to start!

    Thank you!

    Unfortunately, there is no public document on update on this model of laptop HARD drive and I can't say for sure but I believe that there should be any problem. If anyone post here own experience about these updates buy the HARD drive and test it.

    If there is a problem, you can send the HARD return drive.
    This info can be useful for other members of the forum. Because of this, please post the upgrade result.

  • For the Satellite P100 PSPAGA RAM question

    Hey guys

    This is my first post and I couldn't find any help anywhere else about this and so I have a few questions to ask.

    First of all how to find the type of ram I was wheather it's 533 mhz or 667?
    As I was looking to buy 667 sticks, that would happen if I put 667 in 533 locations or vice-versar

    Secondly, I rang a place asking a price on RAM and they said if I put more then 2 gigabytes on my laptop it would be and I quote "BLOW UP".
    I was a bit confused when this chick said that as it says in the online manual I can have up to 4 GB in my laptop.

    It would be actually the case or this chick has no idea?

    As shown in the topic I have a Satellite P100 PSPAGA 014001 or p100-400 that I thought it was called: D and I currently have 2 sticks of 1gig ATM and I have only 2 memory slots

    Would appreciate any help or advice that I am looking to buy and update in the coming days to 4 GB

    Hello

    Check your chipset that was installed in your laptop. Then check the properties and specifications of the chipset, and you will know how much it takes care of the RAM.

    With regard to the 533 Mhz or 667 Mhz;
    As Akuma already said you need to use the 533 or the 667, but I wouldn't mix the RAM modules. This could cause some compatibility problems.

    Welcome them

  • I can't install the drivers on the Satellite P100-387

    When you install the drivers on a laptop computer error message Satellite P100-387.
    The operating system has been installed from the disk.
    The figure shows a screenshot. (http://s2.ipicture.ru/uploads/081003/BtGJuFhOOE.jpg)

    How to install drivers for video cards?

    You can then write in Russian?

    I don t understand Russian and in this forum you can post ONLY in English! So please respect it!

    On your screenshot, I see that you tried to install a driver from nVidia.
    You have to use and install the graphics drivers from the Toshiba page!
    The other pilots graphics from NVidia or ATI are not supported and usually these drivers should be used due to the risk of overheating graphics.

  • Problem running 4,80 Bios Update on the Satellite P100-473

    Hello
    I have a satellite P100-473 enriched with 4 GB of ram, using ubuntu 10.04 lucid 64 with nvidia driver.

    Problem with often increase GPU to high temperature (over 100 ° C) using sensors applet to check.

    I guess that's a BIOS and a driver problem.

    Windows 7 x 64 I don't have this problem with the latest nvidia driver (using speedfan to check the temperature)

    I tried to Flash the bios with the latest version => _Update.exe BD1_BIOS (V4.80) version 4.0, I actually and all flashing same mistake you Error - 121. update of DXE etc...

    While the .exe to extract the contents of the flash on your c:\tmp I'll try a bios flash with a bootable usb key and phlash.exe with the BD13C43. WPH.

    The problem is to find the phlash.exe official back... Phoenix does not provide such tools ;(

    I understand the need of simple bios flash on windows... but I don't understand the .iso missing for flashing at the start when the operating system does not match...

    If you have an idea thanks ;)

    Toshiba has offered traditional old BIOS updated (diskette), a long time ago. Now you can find WIN updates only.
    You can try to contact the closest service Toshiba and ask if they have traditional BIOS update.

  • Latency of the display on the Satellite P100-324

    Pls can someone tell me the latency of the display (Toshiba Satellite P100-324)? (I read somewhere that there 18ms... it's true?)

    Hello

    I found the info response speed (Raise + autumn) East of 25ms.

    Good bye

  • Question about the update of value added for the Satellite P100-160 package

    Hello

    I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
    I downloaded and unpacked. It contains three options:
    2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

    I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

    Can someone advise please that I should use?
    Thank you!

    Hi guys

    Value added package contains many different Toshiba and utility tools!
    Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
    This number can be checked on the bottom of the unit.

    I visited the page of the Toshiba driver and checked the details.
    You will find an info that this package installs a range of important public services.
    -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
    -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
    -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
    -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
    -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
    -TOSHIBA PC Di

    In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again

  • Game Falcon 4.0 allied force crashes on the Satellite P100-324

    Hi all

    I have a toshiba Satellite P100 324 with a nvidia geforce 7900GS 512 MB vram.
    I have a problem with falcon 4.0 allied force. Everything is going well except when I update to patch 1.06 and upward.

    The game freezes for a second every 10 seconds. I sent the allied force. I've tried everything.
    Anti-one off, reinstall the drivers, reinstall direct 9.0 c... They tell me to turn off Full screen Anti-Aliasing.
    Are not full-screen Anti-Aliasing in my menu of the graphics card as anti-aliasing.

    Is there a difference between Full screen anti-aliasing and anti-aliasing?
    So, I disabled everything in the view menu. I tried to update the drivers, but there is no update for this toshiba.

    Does anyone know if there are new drivers for this model?

    Thank you all
    P.

    Hello

    F4AF is an old game, I don't think that you have the latest video drivers. Anti-aliasing anti-aliasing full screen is the same, don't worry about this.
    Of my friends installed this game too and had similar problems. Try to reinstall the game, the patch to the latest official version. Then, there are a few informal corrections called superpak, which solves many problems. Recent publication is by superpak4.

    Check this. Hope this helps you.

    HomerJ

  • I think the Satellite P100-427 has grainy screen

    I just bought a Satellite P100-427 with a Trubrite screen. However, I find that the screen is grainy, especially when you look at a white background. I saw the same video card on a non-Toshiba laptop with the same specifications and it seems ultra sharp - no grain at all.

    What I have to do something to my computer or make me a defective screen.
    Comments are appreciated.

    I think you're the one with this note on the screen. It will be interesting to see what it looks like, because in this way, it is not easy to say something specific about it.

    I can only say that you can try to update the BIOS with the latest version. A long time ago I found some similar comments, and the solution is update the BIOS.

    If you decide to do this please read carefully offered BIOS update document.

  • Display failed on the Satellite P100-434 - need to change the boot order

    Hello
    My Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.
    I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an external floppy drive in, the system reads what it wouldn't if it did not clear the message.
    Is what I would try booting from the dvd, but I need to know the keystrokes and above all, the timings.
    I think memory, it's F12 on first boot, but not sure after that.
    Running Windows 7 Home premium.
    Sorry for the lack of information, by making this post via my Nokia.

    > What I would try is booting from the dvd, but I need to know the keystrokes and, especially,.

    Try F2 or esc (it can also be a delete key)

  • Possibility to update graphics card on the Satellite P100 - 10 p

    Hello

    I bought a laptop from Toshiba Satellite P100 - 10 p which has a Geforce Go 7900GS inside.
    Will be always possible to switch to the graphic card Geforce 8 series (for example Geforce Go 8800 GS)

    Thanks in advance

    Hello

    so many people are asking this, and I love to explain so often. ;)

    No, it s is not possible! You cannot update, since the VGA of the computer is limited to the motherboard, oou if the motherboard has really a port special external pci - e VGA, then everything just because the modular design of the hardware, but not that you can change the VGA card.

    But don t be funereally :), there is a solution.

    There are some manufacturers that are developing a case of external graphics card, where you can put a regular vga (pci-e) card for playing games on a screen.

    Just type in google: slot external vga express

    Good luck

Maybe you are looking for