Framework of the CJC to SCC-TC02

Similar Questions

• A few questions on the framework of the actor

  Hi all

  I tried to get my head under the actor and begins to see the light at the end of this tunnel-no need of sunglasses right away, because I have a few questions remaining:

  1. data transfer :

  So far I've had a quick glance the evaporative cooler model and actor model, as well as worked through the LabVIEW actor Framework Basics by labvolution. These examples are pretty clear for me now. What I don't understand though, is how you are supposed to provide "real" data These examples use only references and then update using the "value" property This may not be very fast, but is probably still enough for user interface applications. But what happens if I have a player who generates data by reading example of a card and I have, let's say, want to detach this far from the data backup process in a file. How I would pass large amounts of data between stakeholders effectively.

  2. using the framework of the actor with RT:

  In presentations to the AF, I saw that they always mentioned that it was completely "capable RT. While this may well be true for the RT itself system, yet once I wonder how to transfer data from an actor of the RT of a player in Windows. Yet once again, suppose I want to generate data on a cRIO and save that data on the host PC. I will establish a channel of communication between the target myself by network flow or similar? It defies any sort of encapsulation of the AF in my opinion...

  3. set the actors:

  However, what worries me the most, is the definition of the actors. How can you know what is a player in your system? Each card set as an actor? Define you each device as an actor and consolidate all I/o to the breast? Is there an easy way to know how to set the actors?

  4. technical support:

  While working with the examples, I found that the debugging can be quite difficult. I had several cases of "Not executable Subvi" this point through several other live who finally call something dyynamically and from there, you discover that one of your screw is broken. Is there an easy to know what is the problem? I know there are modules for LabVIEW that are designed to turn on debugging part of the actor, but who would not be available in a review of the CLA, where you will have only a base installation of LabVIEW.

  5 root and nested actors:

  Finally, I wonder what root and nested average actor. So far my understanding is that the actor root is the parent actor you cast in the launch of VI and nested the actors are all children who serve the actor parent and are, most of the time, launched since the actor-actor of parent nucleus. Is this correct? Is there a better definition of it?

  Any help on this is greatly appreciated. I'm looking forward to the discussion and interested if you frequently use the framework of the actor or if you have abandoned it even once after using it.

  See you soon,.

  Pete

  A good place to ask the question in the framework of the actor is in the community:

  https://decibel.NI.com/content/groups/actor-framework-2011

  And Yes, I've used and uses the framework of the actor.

• framework of the actor

  Hello

  Where can I get the version of the Framework of actor that I have on my PC?

  Best regards, Bjarne

  Hi Bjarne.

  If you use LabVIEW2012, the framework of the actor is located at:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\vi.lib\ActorFramework

  For LabVIEW2011, you can find user.lib.

  If you open the lvlib and go to properties, you should be able to see the version:

  

  If you have installed the framework using VI Package Manager you can see as well the version here:

  

• Effect on correction of the CJC to use copper instead of type thermocouple extension cables

  Hello people. It is is a kind of "phenomenological" question, lumping together a bunch of real problems. Type of hope that someone had experience try this and can give me an advice.

  I'm looking to make measurements of temperature relatively high speed with very fine wire of type K or N thermocouples.

  I will be very many TC - about 75 in quantity and therefore will be, if it works well enough, wire the asymmetrical (I trading accuracy for amount in light of the SCB-two 68).

  My complete data acquisition system is:

  Computer PXI

  PXI-6225

  (Qty 2) SCB-68

  QUESTION 1: Any recommendations in the configuration of these two NRSE or GRSE? The device, I am close to (but not electrically in contact with) is completely without merit (experience of combustion). TC fine wire is indeed very thin, and their not armoured lengths will be about 12 ". There is no significant EMF/EMI around my experience. I will experiment but just wanted to know if anyone can rule something here...

  QUESTION 2:

  Important points:

  • I want to use type N for additional above K to my temperature range and also because that N-type are available in smaller caliber (0.003 ") and stability welded end to end.
  • Unfortunately, I n ' t has a bunch of N type connectors - if I have to use/buy the N type connectors this is a significant cost (see the stop).
  • My Setup has the TC in the physical location of 'groups' of 7. Given the asymmetric configuration, I have 7 anodes and 1 single "reason" for each "group" - for a set of 8 wires out of each "group".
  • I need to connect on the order of 80-wire in both SCB-68. I try to minimize the number of threads that I have to deal with.
  • Omega does not sell single conductor wire anode and cathode for the N-type as they do for K-type. They sell only duplex son.
  • Omega is also not sell armored bundles of type N, as they do in K-type
  • If I use type N TC and I use the real N type extension wire, it will have to be duplex (because of two previous points) - it's something like 80 PAIRS of wiring, with one of the sons of the cathode on most of the wires not used (because of the asymmetrical configuration).

  It seems that I must consider the following compromise:

  Use the TC type desired N and treat approximately 80 pairs of duplex wire extension of type N OR less desired TC type K and purchase grouped, shielded wiring to minimize the mess of wiring GOLD copper use extension (WHAT?)...

  Yes! Why can't I use the copper wire extension to the fine N TC of the cable type and connect to the TC with a kind of nonmetallic connector (like screws nylon) or solder? The attraction here is that I could use the signal wire 8 drivers together, to each of my TC 'groups '. This would reduce and clean my wiring and not need to buy all type N connectors (TC would be wired, no connector involved).

  It seems to me that I could simply set up the cold welding (CSF) on board the SCB-68 fixed to work on N-type. Copper wire would result of the SCB-68 the TC type N. No metal connectors would participate. Thusly, being only one junctions P/OMEGA-copper and copper/OMEGA-N to deal with the CCM. This sounds like it would be exactly the same as a N-type wiring directly into the SCB-68, except that there may be error between the temperature reading to the CJCS and the junction of alloy copper/OMEGA real. This won't be a significant error because the two locations will be very close in temperature.

  If this "mistake" of temperature becomes a concern I can mount a TC that is unique to the copper/TC junction and make my own corrections (I think...)

  Here is a little schematic text (without taking into account all shunt connections in the CSR circuits...):

  Any circuit anode/channel: SCB-68 Terminal-> extension copper-> (direct connection via the non-metallic connector) OMEGA-P of the N type TC

  Common ground circuit/channel: SCB-68 Terminal-> extension copper-> (direct connection via the non-metallic connector) OMEGA-N to the N type TC

  This idea implies that the circuit board within the SCB-68 has copper conductors, such as the addition of copper extension wire would not create an additional junction.

  Anyone tried this? Can someone offer me some ideas?

  THANK YOU in advance!

  -Dan

  ddml wrote:

  Henrik-

  Thanks for the very useful reply. Yes, I forgot to mention that the lengths of wire extension will be the order of 1 m, then resistance extension must be low, even if common ground is used as part of an arrangement of asymmetrical circuit.

  ...

  Here's my last logic!

  • If my experience shows that the single-ended NRSE GRSE arrangement response or "match" the differential response conservative, I will choose asymmetric for more sampling points.
  • Since I know the extension wire / TC to the ASE will be nearly isothermal with the CBS itself, I would like to use the extensions of copper and accept (and possibly correct?) the error based on the temperature. I would like to use threads, as this I need 7 + and 1 ground by grouping of 7 TC to my DUT (Recalling)-> http://www.newark.com/jsp/content/printCatalog.jsp?cat=c127&page=1199&display=zoom
  • If during the examination of the previous point, I find that copper extensions are NOT practical and I need to use tank extensions of TC-metal all the way, then I choose a TC type K on an N-type. The reason is that there are many more options for tanks, bundled extension cable type K (N-type is apparently a sort of new and not very popular). However if copper extensions are possible, then I'll use the TC type N, motivated by their superior high temperature oxidizing atmosphere stability and the fact that I can get them in a configuration welded end to end to 0.003 "caliber!

  If none of this logic seems faulty or unrealistic, I would appreciate it really more input! I don't know that it will be a lot of work!

  Thank you once again,

  -Dan

  Dan,

  I've marked the important phrase what you're actually doing is moving the CCM of the CBS for the TC/copper connection. Any difference in temperature will directly add to the error.

  However, don't try to save the copper with your approach to 7 + 1, ask IT for another 12 m Ethernetcable guys more and go with 7 * 2 + 1 pair of reserve and make the summary at or near the CBS. IF you need a differntial measument system later, you need to rebuild all connections. (And not just add a new cable for all conical fittings, it is the twisted pair that makes the magic Yes, same vor 1 m!) Remember that you are dealing with µV! And since you want to quick reads without filter a lot of way, do not try to save $10 to about 12 m of cable. Somehow I have the feeling that you try you anyway

• Temperature measurement and the CJC using thermocouples on a USB - 6229 BNC

  Hello

  I'm trying to get the measurements of temperature using type K thermocouples on the box nor usb-6229 BNC. SignalExpress software doesn't let me choose 'Built In' to the Source of the CJC. So, I must select 'Constant', which means that I then have to follow the evolution of the temperature during the day with a separate meter and adjust the value of CJC accordingly to maintain an accurate reading. Is there a way around that to avoid having to monitor the room temperature at the junction?

  Thanks in advance

  Mike

  Hi Mike,.

  It seems that you have managed to find a solution for you have this problem, which is great news.

  However, for future use, if you had bought the 6229 with massive ending (rather than the interface BNC) then you might have interfaced unit with a block of connection SCB-68 (see link)

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180

  The SCB-68 has a CYC source built-in, so you might have used in conjunction with 6229 (mass layoffs).

  A bit of in the way, but I thought you may be interested.

  Best wishes to you all

• Microsoft cryptographic services. Is registered in the framework of the SP3, but is absent.

  Is registered in the framework of the SP3, but is absent. I ran the Microsoft Fix it 50528 recommended solution that appears to run successfully the service is not yet installed.

  Hi Ronnie,.

  You use Intel Rapid Storage Technology program on the computer?

  If you are using Intel Rapid Storage Technology program, I suggest you to update the driver for the same thing:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=software+products&ProductLine=chipset+software&ProductProduct=Intel%C2%AE+rapid+storage+technology+%28Intel%C2%AE+RST%29

  Let us know the results.

• The framework of the call works on a Dev Alpha device?

  Hello

  The framework of the call (to share of text or files to an application via the share button) works on a Dev Alpha device?

  It's my bar file - descriptor.xml - I want to register my app for the menu to share with the text:

    default false  John Deer AppIconsForPublish/appname_1280x768_splash_landscape.jpg core.media  100 1.0.0.0  AppIconsForPublish/appname_114.png John Deer1234567890
  
   VIEWER bb.action.OPENtext/csvtext/xlstext/plain  
  
    APPLICATION  bb.action.SHAREtext/csvtext/xlstext/plaintext/*  
  
  run_air_native
  
  
  

  Is there something missing?

  Thanks for all your comments!

  Vibes

  I should start by individual tests and see if it works.

  I leave you a few samples I saw and work:

  Share your app from the text:

  
        APPLICATION
       
           bb.action.SHARE
           text/plain
          
       
    

  Share the link with your application:
   
      APPLICATION
        
               bb.action.SHARE
               *
              
        
   

  This one is for opneing my app with local files with these extensions:

  
          APPLICATION
          
              bb.action.OPEN
              *
              
              
          
      

• Sharing of framework in the Beta3

  Hi guys,.

  could someone already find documentation on the sharing framework, which should be available in beta 3? So far I found only things related to share via NFC but not to share via email, twitter, bluetooth, etc...

  Thank you

  Conny

  I think that the framework 'sharing' you mention is just another case to use the framework of the call, with a few predefined actions (maybe bb.action.SHARE?) and other parameters. If Yes, they are actively working on the finishing document all of these Invocation Framework uses and will be posted the docs for him shortly (I think in a week or two at the most, based on what I heard yesterday).

• Framework of the CSF

  For a framework of the independent csf program my passwords are smooth and wanted to be encrypted or typical

  Ok. You can use Base64Encoder to encrypt your password and Base64Decoder to descrypting your password. Don't forget to set encrypted password in your properteis instead of a text file that you can easily retrieve using the resource group and decrypt.

  In addition, providing reference thread below:

  http://StackOverflow.com/questions/4487525/encrypt-and-decrypt-a-string-in-Java

  ____

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find.

• Hi I was doing a tutorial on spllcing images and am confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi, Yona,.

  The application is available for Mac machine and not a windows machine.

  Concerning

  Rohit

• Hi, I would like to add an image in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.

  

• Application of a few framework using the workflow of discussion. As an option you

  Application of a few framework using the workflow of discussion. Optionally you can click to watch the forum/topic and then there are option, I want to understand just what that (subscribe) means. Look at the topics/forum email user what value subscribed the Add option.

  Everything that applies to Framework portal application.

  Especially for the Discussions, Yes. Note that the Discussions and subscriptions are independent services of spaces (one year previously there used a license called 'WebCenter Services', where spaces have not been included). The button 'Subscribe' is, then implemented in a workflow, you can add to your application. In fact, Services can be consumed by other portals (such as Weblogic Portal) - in this case, the workflow must be implemented through the other environment.

• Legal framework of the extension of IDML

  Hi guys,.

  I am doing a project of PoC on Adobe Digital Publishing Suite. And I'm continuing IDML as language of communication through several phases of the application.

  Now I'm in a situation where I have to add a few additional tags to IDML to meet our requirements.

  I need to know if this action is legal. Can you please provide me a resource where I can go and check out the legal framework of the present.

  It's really appreciated if you can help me on this.

  Thank you in advance.

  Hi rushmin,

  What you do with your IDML belongs to you. The worst that will happen is that InDesign is perhaps not able to open it.

  Thank you

  OLE

• [CS3, ACE] Head Turner: Image shot differently in the framework of the tour...

  It is possible to get x, y coordinates of each angle of a rotating column?

  ... and from every corner of the limits of the image contained in the said framework?

  Difficulties with positioning when re-linking an image in a frame rotating turned out differently after editing in PS. Image appears to move slightly to the right and downwards.

  So far, close but smoke in the absence of cigar.

  You can get the values for the frame by getting "full path of channel 1 of the ' it. You can rotate the content framework so the image is without rotation, do your sums there, then cancel to put it back.

• best practices or framework for the design of OSB(11g) process

  Hi all
  
  We worked in oracle 10g, now in the new project we will use Soa suite 11 g. For 10g, we have designed our services very similar to the framework of AIA. But since the introduction of OSB 11 g we are not able to exactly fit the frame of the here AIA because the BSO has a different structure of the BSE.
  
  Can anyone suggest some design framework for the design of processes in OSB or 11g SOA Suite or best practices?

  http://download.Oracle.com/docs/CD/E12839_01/integration.1111/e10223/04_osb.htm

  http://www.Oracle.com/technology/products/integration/service-bus/index.html

  Kind regards
  Anuj