Free access to the subscribers-magazin-printing

Similar Questions

• Why is no longer a free access to the radio stations on ITunes?

  I can't access the FREE on ITunes radio.

  APPLE wants to CHARGE $$$ to listen to the radio.  WHY?

  The music is free if you subscribe Apple music > Listening to Radio Music Apple

• Admin password blocked on Windows XP, no access to the internet or printer

  AS ABOVE

  < help......................="">

  Hello

  See the following article to correct this information:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Also note that Microsoft support engineers can help you to recover the passwords of the files and Microsoft who are lost or forgotten product features.

  See also:

  Microsoft's strategy concerning lost or forgotten passwords

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• Server 2008 - adding the role of print server to access the tools of PrintBRM?

  Hello

  I have Windows Server 2008 with about 50 + printers currently installed. This server is configured to use Terminal Server services.

  I want to access the PrintBRM tool to export this configuration for the additional Terminal servers, but I don't have the active print server role.
  If I add the role of server printer so I can use PrintBRM, will this affect my configuration current impression? I will start adding printers through print management?
  I appreciate the help!

  Figured it out.

  Another server in 2008 with the role of print server already installed can remotely back up and restore a Server 2008 configuration of the printer using printbrm.
  Backup:

  %windir%\System32\Spool\Tools\PrintBRM s------nom_ordinateur_source b f filename.printerExport

   

  Restoration:

  %windir%\System32\Spool\Tools\PrintBRM s-nom_ordinateur_destination - r f filename.printerExport

   

  Help:

  %windir%\System32\Spool\Tools\PrintBRM /?

• Lost access to the preferences of the two priniters printer

  I lost access to the preference files to printer on the printers connected by USB 2 to a laptop running Win. XP.  The printers work without them.  I have since installed a new driver on one.  The problem remains. I join this printer to another computer and there is no problem.  Advice please on the best way to analyze this problem because there seems to be a lot of possibilities.

  I lost access to the preference files to printer on the printers connected by USB 2 to a laptop running Win. XP.  The printers work without them.  I have since installed a new driver on one.  The problem remains. I join this printer to another computer and there is no problem.  Advice please on the best way to analyze this problem because there seems to be a lot of possibilities.

  If I understand correctly, Windows XP indeed cannot replace printer drivers in certain circumstances.  The best way to go is to make sure that the old (maybe corrupted) driver is deleted and then reinstall the printer using an installation package of fresh driver (usually obtained by downloading from the website of the printer mfr).

  1. Unplug the printer.
  2. Uninstall the software associated with the printer using the control panel > Add / Remove programs.
  3. Open Printers and faxes and delete the printer (right click > delete)
  4. In printers and faxes, click file > server properties > tab drivers.  Select the driver concerned, then click on remove.
  5. Restart the computer.
  6. Run the installation package that you downloaded.  Do not connect the printer until prompted by the installation program.

• Network printer works, it then says access denied the next

  Main PC running Vista, HP printer, router and DSL modem Wireless Linksys.  Remote control PC is running XP.  Printed OK one day, then said access denied the next.  Can see the files shared by travel media.
  Restared router wireless, PC main and NO help.
  Shared printer on the main PC.  A ran MS spooler FixIt. No error found.

  Uninstalled the printer on the PC remote and re-installed and now it prints.

  Ideas?

  It's weird under Vista, I have disabled password for printer & File Sharing protection, now I can see the printer again on the XP PC and it prints.

• How to access to the file printing in LR CC?

  How to access to the file printing in LR CC?

  There are no print queue in LR. The print queue is managed by the operating system.

  What is your operating system? What exactly is your problem?

• I bought the kit the student creative cloud after the expiration of my first free month of the trial.  Now I can not access all the apps.

  I bought the kit the student creative cloud after the expiration of my first free month of the trial.  Now I can not access all the apps.

  Hi zackf49452714,

  I'm sorry for the inconvenience caused.

  Please follow the steps https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Let us know if this helps!

• I bought the software adobe reader 10 online. Recently, I updated my software and I lost my access to tools. It seems that if I use a free version of the adobe reader software. How can I go back to my old version?

  I bought the software adobe reader 10 online. Recently, I updated my software and I lost my access to tools. It seems that if I use a free version of the adobe reader software. How can I go back to my old version?

  OK, you can still be installed. Check the start (Windows) menu or LaunchPad (Mac). If this isn't the case, you will need to reinstall with the media and the original serial number.

• guest computer must have access to the printer host cannot use

  I have a new Mac, an old Mac, an old Windows machine and printer of Xante AW1200.

  Almost all of my work is done on the new Mac.  I get the old machine Mac or Windows of the drawer on rare occasions, or when I need to print something, because the new Mac cannot use the printer.  (Xante never taken the trouble to develop an OS X 10.6.4 driver for this printer.)

  I would like to get rid of the Windows machine.  I have it successfully migrated to a machine of comments on the new Mac, using vmware Fusion 3.1.3 but I have not found a way to get the computer to see the printer.

  This isn't a complete surprise, as Xante does not provide a driver for their (former) printer and (my new host) operating system OS X 10.6.4 - but they were planning a WIndows XP driver that has always worked well on the Windows machine, connected by the RS232 port.

  The printer also works very well on my old Mac, connected via ethernet.

  Can I connect the printer to the new Mac's ethernet port.  Of course, the Mac cannot work with it.  But could the guest computer use Windows sound driver to manage the printer?

  None of the four standard ways of printing seem applicable: ThinPrint because the host cannot use the printer.  USB because the printer is not a USB connector.  network / wireless because I do not have my old Mac running all the time.  Hello because I think that it requires that the host can see the printer.

  It certainly isn't a frequently asked Question.  Sorry, my situation is so unusual.  But the printer is special enough for the work that I do.  Any tips?

  Thank you.

  If you have a router on your site then you should be able to connect the printer to the router, configure it as needed, and then accessing it in the comments as a network printer.  Note: The guest network should be configured as connected by a bridge to access in this way.

  Another option of network which is doable, but a little more difficult to set up, is to fix the printer directly on the Mac with a standard CAT5 Ethernet cable, not a Crossover as suggested in the Ethernet Port of Mac being automatic detection User Guide.  You would then manually configure the IP address, etc. on the printer and network bridged on the comments and even if Bridged his only access to the printer on this network adapter.  Then use a second network in the guest configured as NAT, if you do not also use Bridged on that, to enable the client to have access to other resources on the physical LAN to the host, such as Internet access, etc..

• ESXi 4.0.0 not allowing access to the total capacity of the RAID (FREE)

  Hello everyone.  I'm new to ESXi, having installed just 4.0.0 on a custom server.  The hardware of the server is:

  Motherboard ASUS Z8PE-D12

  Asus PIKE 1068E SAS/SATA card

  5 x Seagate 1.5 TB 7200 RPM SATA drives

  2 x Xeon E5630 2.53 GH (Quad Core)

  etc...

  Asus PIKE 1068E map uses FREE chipset to provide SAS/SATA RAID0/1/1E features.

  I have configured three hard drives in an array of size 2.0 TB RAID1E using the accessible FREE configuration utility for the system to start.

  I installed ESXi on another hard drive that is not part of a RAID array.

  AprΦs dΘmarrage ESXi, I launch the vSphere Client and connect to the server.  I'm sailing on the Configuration - & gt; Storage section, then click Add storage... option.

  I selected disk/LUN, then it lists the available devices.  I am able to see the FREE Serial Attached SCSI disk with a capacity of 2.05 to.  Then, I chose this drive to create a data store.

  On the next screen, it shows the FREE Serial Attached SCSI disk device (and a very long identification number).  Ability displays 2.05 TB but 'Available' only 47,47 GB.  He also says "the hard drive is empty. (SEE SCREENSHOT)

  "I can't find a way to increase the value of" available "to 2.05, which is the capacity of the disk. 47,47 Go is nowhere near capacity.  The program only allows me to create a store of data with 47,47 GB of space.

  Anyone have any suggestions for access to the full size of this volume to add to ESXi as a data store?

  It is not a driver problem, because the volume is properly recognized and the capacity is displayed correctly.  Not sure why it shows that 47,47 GB available.

  ALL SUGGESTIONS GREATLY APPRECIATED!

  Thank you!

  I've attached a screenshot of the management screen showing the capacity and space available:

  Basically, the size of your drive is greater than 2 TB, you can only use the left in space after 2 TB to be 2.05 TB, so it would be 47 about 50 GB seems straight, you disc 2 to - 512 b, must then he can use everything

• Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

  My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

  Hi @arts4pat,

  Welcome to the Forums of HP Support!

  I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

  I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

  NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

  If you have completed all the above steps and your product still has a problem, the printer service.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to choose your
  contact options»
  Step 4. Scroll down and click on: contact HP options - click Get phone
  number
  File number and phone number are displayed.

  I hope this helps. Good luck!

• You download the Bing bar in order to be able to have access to the Smart Print?

  Do I have to download Bing bar (just what I need!) tool to be able to use HP Smart printing?

  Hello. To answer your question, the Bing toolbar is part of the HP Smart printing facility.

• Effect of the access lists on free access of high to low by default

  I'll implement access rules list on PIX525 (V6.3) with several DMZ, but want to minimize the rules.

  Scenario - 3 interfaces (inside (secuity100, average security50 outside Security0)

  To allow hosts on the way to reach the inside I create an access list applied to a central interface. However, will be an implicit (or explicit) deny at the end of the access list prevents the intermediate hosts with default value to open access to the lower security outside the interface?

  Thank you

  Mick

  Level of security and access lists:

  To grant access of lower to higher level, you need to an access list and a static.

  Equal to equal level cannot talk to each other.

  Higher level of security can talk to lower levels, if there is no access on this interface list and the NAT is configured correctly.

  ACL will add at the end a "deny ip any any" after a statement of license. So getting back to your question: If you allow a DMZ host to connect internal host on a specific port that all other connections are blocked. You must specify all the tarffic in this access list otherwise they will be blocked.

  The only exception is the traffic may be from other interface access lists to the demilitarized zone, answers etc. For example, you are allowing port 80 to a dmz host outside this traffic will not be verified again by the dmz access list.

  sincerely

  Patrick