Free space on the PS5000 and host different reports
Hi guys,.
I got my hands on a PS5000 a few days ago and am still getting used to it.
My question is perhaps more approprriate for a Dell forum, but I'll take my chances.
I just emptied on a volume, making use of svmotion. vCenter reports my LUN vacuum
but when I check the PS5000, he pointed out that there are still some 160 GB in use.
It seems that other volumes reported sizes are inconsistent with what ESX reports.
Any ideas? I tried clear as a disconnect, and refreshing
See you soon
Where my question on verification of i/o to the LUN. Pulling up to the LUN, while the host is using is not a good idea.
Property to true.
In any case, I'm not sure that there is a command (except esxtop) line to monitor the disk i/o.
André
* If you found this device or any other answer useful please consider awarding points for correct or helpful answers
Tags: VMware
Similar Questions
-
It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.
~*~
OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).
~*~
I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;
~*~
"Cannot complete the movie publish .
The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."
~*~
I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)
~*~
Thank you very much
Len
Microsoft Windows Movie Maker is not to let me publish my movies
Hello
I suggest you try the steps mentioned in the link given below.
Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.
http://support.Microsoft.com/kb/930435
Additional information:
Solve problems with publishing a movie to your computer
-
Hello
in our RAC environment, we have setup an ACF. Mainly use us it for RMAN backups. By connecting to the ASM instance and run the query
Select name, State, total_mb, free_mb from v$ asm_diskgroup;
We get the following result:
NAME STATE TOTAL_MB FREE_MB
------------------------------ ------------------- ----------------- ----------------
10738 9912 MOUNTED DG00_CRS
409592 360173 MOUNTED DG01_FR
6553568 1628732 MOUNTED DG02_DATA
DG03_BACKUP MOUNTED 5615920 4227
Seems to me that the ASM instance is of the opinion that the amount of releases diskgroup DG03_BACKUP space is 4227 MB. BotR when checking on
level of operating system, the result is different:
1 K-blocks used available use % mounted on file system
/ dev/ASM/v03_backup-33
5746196480 2430545120 3315651360/u01/app/oracle/orabackup 43%
= > In fact, we have about 3.3 TB of free space available. Should this result will not appear when you run the above query? I currently have
don't have an idea why the query returns 4227 MB...
Any help will be appreciated...
Rgds
JHACFS is a feature of 11.2, while the DSO has existed long before
ASM will take into account the volumes such as space used when querying V$ ASM_DISKGROUP, charge the lsdg in asmcmdYou can use the view V$ ASM_ACFSVOLUMES and V$ ASM_FILESYSTEM to ACFS
or volinfo in asmcmd -
Original title: VISTA HOME BASIC MOVIE MAKER
Hello
I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not. Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?
Hello
I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not. Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?
===================================
I suspect that the problem is the format of the music files.
If you can convert them. Before you import into WMA
Movie Maker, you may be able to publish.Format Factory free software can convert. MP3 files
WMA... and can also join MP3 files.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(the file you want to download is: > FFSetup260.zip
(FWIW... installation..., you might want to
Uncheck the box 'all' boxes on the last screen)Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I bought the extra memory. I have to do something when I install the new memory?
I went to the Disk Defragmenter, and he always says that I have 35% of free space. The new memory will change this amount? Or is it important?Monday, December 20, 2010 18:53:59 + 0000, Magallón wrote:> I bought extra memory. I have to do something when I install the new memory?Generally no.How many memory currently have installed? How did you buy?Did you buy exactly the same type, brand, model, etc. ?Why do you want more memory? Depending on how much you have now, andWhat applications you are running, it may or may not do anything for you. More memoryis this not better for everyone. This is my standard message on thisObject:The amount of RAM you need to good performance is * not * aunique situation for all. You get good performance if the amount ofRAM you have prevents you from using the file page in a meaningful way, andIt depends on what applications you are running. Most of the people a typical range runningEnterprise XP applications find that somewhere around 512 MBworks well, others need more. Almost everyone will see poor performancewith less than 256 MB. Some people, especially those who do thingsas modification of large photographic images, can see an improvement in performance byadding even more 512 MB - sometimes much more.If you currently use the page file significantly, more memorywill reduce or eliminate the use and improve your performance.If you do not use the pagefile significantly, it will make more memorynothing for you. Reachhttp://billsway.com/notes%5Fpublic/WinXP%5Ftweaks/ and downloadWinXP - 2K_Pagefile.zip and monitor your use of the page file. Who shouldgive you a good idea of more memory can help and if so, howlots more.> I went to Disk Defragmenter, and he always says that I have 35% of free space. The new memory will change this amount? Or is it important?You have 35% of your hard drive free. It's disk space, also calledstorage. It is not memory, what is RAM. Adding memory will not makeany changes to the available disk space.Ken Blake (MS-MVP)
-
I have less free space on the C drive, and I have exactly 56.998 space USED (s)... Here is the photo that explains everything...
P.SI recently installed a new Windows 7 because my PC was crushed.Adding sizes show in various properties of the folder does not show the actual space consumed.
This free utility can reveal information relevant and that is using the space
-
check the free space on the data store before making svmotion
I'm trying to understand how to check free space on the data store until the proceeds of the svmotion.
Example:
-must first check that that sizeof (VMs to be moved) < sizeof (destination) - 50 GB before in terms of the
-should leave a 50 GB buffer so that the script ends when all the VMS are moved from source data store or there are only 50 GB left on the source data store
-must move VM to store data source to the destination data store 2 at a time, until the completion
-must create a local log file, and then send this log file using the relay smtp server.
I just started using powershell and have played with different things for about a week. I'm trying to understand this problem, anyone has advice or suggestions for me?
Any help would be greatly appreciated...
Hello
Yes, the $vmname is empty, change the line as below
Move-VM -VM (Get-VM -Name $vmm.Name) -Datastore (Get-Datastore -Name $DSname)
-
Hey guys,.
So I tried to import some ~ 8 GB of photos on my mac, but the Photos app gives me the following message: "there isn't enough free space on the volume of your library to import the selected items. It is estimated that you need at least X.XX GB of additional free space. »
Where X.XX represents the amount of GB it says that I need but it changes everytime that I reopen the application to attempt an import.
My mac has currently 44.4 GB so I don't know why this issue is coming.
Any help would be great!
Thanks in advance,
Andres
Where is your library? If it's on an external HD and how the drive is formatted?
Have you tried to repair the library according to this document from Apple: library of your repair?
What version of PHotos do you use?
-
Cannot use disk utility to create the partition of the free space on the external USB drive.
I have a red 3 TB Western Digital drive in a USB hard drive docking station.
The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).
The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.
I checked free space on the drive with my Windows machine:
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 167 GB 20 GB
Disk 1 Online 465 GB 0 B *
Disk 2 Online 2794 GB 1526 GB *
DISKPART> select disk 2
Disk 2 is now the selected disk.
DISKPART> list part
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Reserved 128 MB 17 KB
Partition 2 Primary 1267 GB 129 MB
DISKPART>DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.
I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.
Here are a few screenshots:
... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):
... of the NTFS volume in disk utility:
... of information for the drive in disk utility:
... of information for the NTFS volume in disk utility:
... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):
I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.
In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.
-
What happened to my 10 GB of free space on the disk?
I don't really know... Yesterday, I deleted a lot of films and albums of music from my pc and I am very sure that after I emptied the recycling bin, I had more than 31 GB of free space on the disk. But now... after that I just turned on my pc to start by knitting I noticed that my changed only 20.9 GB HDD space... what happened to the other 10 GB? No, I did not commit a any error with what I pressed on to empty the recycling bin and I even run windirstat just to check everything and I saw nothing wrong with all my files...
IM using windows 7 ultimate sp1 with 100 GB hard drive (no partitions) 2 GB ram and 2.3 ghz cpu
Hello
Thanks for posting your query in the Microsoft Community Forums.
I understand from the description of the problem, that after deleting a few files of the computer, the hardware space shows 20.9 GB despite 31 GB in Windows 7 computer.
I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.
I suggest you try these methods and check if it helps.
Try logging in SafeMode with network and check if the problem persists. If the problem is resolved, perform the scan anti-virus in SafeMode with network.
Method 1
Step 1
Start your computer in safe mode with networking.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Note: When, at the forefront of startup options select safe mode with network.
Step 2
I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.Method 2
Reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.
http://Windows.Microsoft.com/en-in/Windows7/delete-files-using-disk-cleanup
It will be useful.
Let us know if you encounter problems with Windows in the future. We will be happy to help you.
-
How to extend the partition that has free space on the left with diskpart
I bought an SSD and made a second partition on my HARD drive to transfer my data. I had planned to clone and move the light to my SSD partition, but read that I was better to do a new install. I made a new installation on the SSD drive, deleted the old partition of Windows 7 and went to add to the data partition unallocated space (unallocated space is to the left of the partition). I know that you can not do this with disk management, but I've done it before on my laptop Windows 7 by using diskpart. I found an article earlier about how use diskpart to do what disk management may not, but I don't know how or where I found it.
I know I can do it with applications 3rd party like GParted, but knowing that it is possible, but don't remember how to do it with diskpart is driving me crazy. Can someone help me?Hi Schwaka,
As a general rule, it is very easy to extend the partition when the free space is right behind, but what can you do with the space left? Most people will feel that it is really a great difficulty.
Do not worry! Here I recommend you an easy to use, software AOMEI Partition Wizard Server Edition. It is so common among computer users and most of the people speak highly.
Your problem, there are two choices for you. We have to move the space unallocated behind, and the other is to merge the free space on the data partition. Both functions may not be permitted in Windows 7 disk management. In addition to the two features, more functions are supported to manage your drive.
Have fun with it!
Best wishes!
-
Calculate the free space of the lob segment / reclaim space?
Friends...
DB: 11 GR 2
OS: Linux
I am trying shrink lob segment and recover the free space between the business segments.
This area in Oracle DB is new to me so try to learn and to shrink the segment.
I went through various metalink doco (386341.1) but not be able to get answers for below...
Issues related to the:
1. how much free space is available in the lob segment?
2 can I assume 'no LOB DATA' as the free space currently and even will be recovered once the segment will be shrunk?
3. no disadvantage of using "ALTER TABLE... SHRINK SPACE.
4. is it true if storage segment is 100 GB as many redo will be generated when trying to alter table... shrink the space?
I'm following the steps below.
1 find Segment name-> sys_lob123
2. find the size of storage - > 100 GB
3. find the size of the LOB data-> 70
4. find the size of the data not LOB-> 30
2. the storage size
Select 'storage' from dba_extents bytes
where nom_segment = 'sys_lob123. '
100 GB
3. the size of the LOB
Select dbms_lob.getlength (col_lob) in the table_lob;
70 GB
4. the size of the LOB data not
100-70 = 30 GB (i.e. #3 - #2)
Thanks in advance and enjoy your time looking into this...
Use DBMS_REDEFINITION to reorganize the LOB segment, it is the best way to retrieve a LOB segment space. Also use the clause "MEANS of COMPRESS" and SECURE LEADER, creating the temp table. There is no reason that you can use the BASIC FILE. It's online process, which means that your app can stay up to... However, make sure that monitor you the database when executing redef, as it can cause conflicts and slow down your application, in which case you must kill the reorg...
If this process is not feasible or overwhelms you, "ALTER TABLE MOVE" is another option.
With 'Displacement of Alter table', you need to rebuild all indexes after you move the LOB segment. Don't forget this is an offline process and your application needs a time out while you do this.
Here is the query to list the 10 LOBs albums in your database-
fixed line 160
Col a20 PROPRIETARY format
Col TABLE_NAME format a30
Col COLUMN_NAME format a30
Col nom_segment format a30
size col 999 999 999 format
SELECT *.
FROM (SELECT b.owner,
b.table_name,
b.column_name,
a.segment_name,
SUM (a.bytes) / (1024 * 1024) "size".
FROM dba_segments a, b dba_lobs
WHERE a.segment_name LIKE '% SYS_LOB '.
AND a.segment_name = b.segment_name
AND a.owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "OUTLN")
B.owner GROUP,
b.table_name,
b.column_name,
a.segment_name
ORDER BY DESC 5)
WHERE ROWNUM<>
-
determine the free space of the tablespace
Hi all
How to determine free space of the tablespace?Can use this:
select tablespace_name, case when sum(bytes) >= 1073741824 then round(sum(bytes)/1073741824,2)||'gb' when sum(bytes) >=1048576 then round(sum(bytes)/1048576,2)||'mb' when sum(bytes) >=1024 then round(sum(bytes)/1024,2)||'kb' else sum(bytes)||'bytes' end free_space from (select tablespace_name, bytes from dba_free_space union all select TABLESPACE_NAME, 0 from dba_tablespaces where CONTENTS != 'TEMPORARY' -- this will add full tablespaces union all select tablespace_name, maxbytes-bytes from dba_data_files where AUTOEXTENSIBLE='YES' and maxbytes>bytes) group by tablespace_name order by sum(bytes);
-
Creating a space between the image and text
www.bristolequestrianservices.co.UK
On my index page, I created an another social media on my page buttons on my right side. Don't want to confuse people but social-media-icons2 # are on my right side because I wanted to change the margins.
I want a gap between my h2 tag "View Gallery" and then the photo and a space after the photo and follow us... Thank you, Karen
CSS
#social-media-icons {float: right ;}} #social - media - icons ul li {display: inline ;}} UL #social - media - icons {margin-top: 40px ;}} #social-media-icons2 {float: left ;}} #social - media - icons2 ul li {display: inline ;}} UL #social - media - icons2 {margin-top: 10px ;}} < div id = "right" >
the latest news < h2 > < / h2 >
< p > < a href = "newpictures.html" > new pics added < /a > < /p > "
< p > < a href = "testimonials.html" > new stories < /a > < /p > ""
See the Gallery < h2 > < / h2 > < br >
"< img src="images/photos/1a.jpg "/ > < br / >
Follow us < h2 > < / h2 > < br >
< div id = "social-media-icons2" >
< ul >
" < li > < a href =" https://www.Facebook.com/groups/150449201771804/ "> < img src="images/icons/facebook.jpg "/ > < / a > < /li >
"< li > < a href =" £"> < img src="images/icons/rss.jpg "/ > < / has > < /li >
" < li > < a href =" http://www.Twitter.com "> < img src="images/icons/twitter.jpg "/ > < / a > < /li >
"< li > < img src="images/icons/youtube.jpg "/ > < /li >
< /ul >
< / div >
The H2 tag absorbs a rule applied to many items on line 10 of styles.css (margin: 0; padding: 0;).
The H2 tag is used in contexts as long as you probably don't want to add a fill rule for all of the H2 in concrete. You can add a generic utility class, for example:
{H2.padBottom10}
padding-bottom: 10px; / * change to quantity * /.
}
The tag 'Follow us' is a good example of this because it would have absorbed this bottom padding if you do not use a class for itself. It should also have a generic class applied to him of H2, so that others are not affected, same as above, but a different utility class:
{H2.padTop10}
padding-top: 10px;
}
As with CSS, there are 1 million ways to do this, but on specialized articles like this, if it doesn't appear in the same place or continues a smaller purpose, applying a general utility class can be useful.
Then you must add just the H2 class, for example
See the Gallery
,Follow us
. -
If my insert takes the free space above the pctfree?
Hi guys,.
If I have my pctfree set at 25%, my block is currently used by 70%, and I do an insert that will leave free of only 5%, Oracle will migrate the line that I inserted, while 25% is still free?
Thank youOGUY,
Oracle will string your line. Migration is happening with the Update statement, not with the insert command. If you insert a line that exceeds the free space of the block, oracle will be chaining line in multi parts be stored.
HTH
Aman...
Maybe you are looking for
-
yahoo email does not display the images on certain messages
I have a MacBook Air, OS 10.11.3. In the yahoo email, Safari and only in some emails images will not appear. It confuses me because some emails are so perfect in others the images does not appear. All emails from yahoo are received perfectly on th
-
Is the mouse Magic Mouse from Apple, a Wi - Fi connection or a Bluetooth device?
I use a final model of the Apple Magic Mouse with my latest model MacBook and OS X and I think it's very nice design the Magic Mouse is useless for my needs but it is not accurate at all. I found that the mouse is very difficult to manage these momen
-
Upon completion all of the updates is safe to delete the system (old and new)
Upon completion all of the updates is safe to delete the system (old and new)
-
I get random prints for my 5520 (not sent my network). ePrint is off.
Since it was installed 4 months ago, almost every day my 5520 print two sheets, ALWAYS a Disney character coloring page and a page of Disney game. Power paper and ink - Help!
-
Computer using only 50% of the CPU memory and 124%
So when I'm doing intensive tasks (that's to say working in first and then simultaneously connecting clips to compositions of AE and work on them) seemed to me recently to hit massive roadblocks. So ive been editing a project for the last 2 weeks wit