Upon completion all of the updates is safe to delete the system (old and new)

Similar Questions

• Update events with the same old and new values.

  Hello.
  I use simple replicated cache and subscription to update events to it with the ObservableMap #addMapListener (MapListener) method.
  The problem is that, in the case of update received old and new values are identical by operator is.
  The values are updated by the following scenario:
  E MyEntity = cache.get (myKey) (MyEntity);
  e.setName ("new name");
  cache.put (myKey, e);
  
  I have this problem only if there is a single node of the cluster, adding new nodes solves problem.
  
  How can I solve this problem for the server node?
  
  Currently I use the copy constructor to put the new object with modified fields to get two items in my interlocutor. Like this:
  E MyEntity = new MyEntity ((MyEntity) cache.get (myKey));
  e.setName ("new name");
  cache.put (myKey, e);
  -----
  Cache configuration:
  <>cache-config
  < cache-system-mapping >
  <>cache-mapping
  < name of cache - > * < / cache-name >
  < scheme name > MyReplScheme < / system-name >
  < / cache-mapping >
  < / cache-system-mapping >
  
  <>- cached patterns
  < replicated system >
  < scheme name > MyReplScheme < / system-name >
  < service name > MyReplService < / service-name >
  < support-map-plan >
  < local-scheme / >
  < / support-map-plan >
  < / replicated system >
  < / cache-plans >
  < / cache-config >
  -----
  Version 3.6.0.2 consistency.
  The JDK version: 1.6.0_21 x 86, x86_64 1.6.0_26
  
  Edited by: simlink April 30, 2013 04:55
  Added temporal solution.

  Hello

  Yes, I suppose you could say that it is a 'feature' of a single node cluster. But given that nobody uses consistency as a single node cluster, I would say that this is not a problem; even your tests should not be done on a single node cluster. The whole point of consistency is it is on ladders to store data across many virtual machines Java, if you can organize all your data in a single JAVA virtual machine, and then use a hash table and save the cost and complexity of the use of consistency.

  JK

• Extraction using the date: old and: news in the triggers

  Hello
  
  I'm exeuting everything by retrieving a field and a trigger date help: OLD and: NEW variables, it leaves the game time stamp.
  
  "for example, the value real start_date field in the table is 12 October 2005 19:04:25 ', but when I use: NEW.start_date, it returns only 12 October 2005.
  How do I return the timestamp also?
  
  Thank you.

  :) Oracle implicit conversion / comparison I guess, try this and let me know the result.

  DECODE(:NEW.start_date,:OLD.start_date,CAST(NULL as date),:NEW.start_date)
  

  Here's an illustration of what I'm trying to say.

  Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
  Connected as hr
  
  SQL> select decode(sysdate,sysdate-1,CAST(NULL as date),sysdate) from dual;
  
  DECODE(SYSDATE,SYSDATE-1,CAST(
  ------------------------------
  12-May-2010 12:11:50 PM
  
  SQL> select decode(sysdate,sysdate-1,NULL,sysdate) from dual;
  
  DECODE(SYSDATE,SYSDATE-1,NULL,
  ------------------------------
  12-MAY-10
  
  SQL> 
  

  Published by: mohamed on May 11, 2010 23:42

• Would like to know if I have the 64 bit version of windows 7, if I can play all the games, old and new or just new games

  Ideas:

  • You have problems with programs
  • Error messages

  Recent changes to your computer

  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  1. click the button start, right click on computer, select Properties.  The system section will let you know if you are running 32-bit or 64-bit windows.
  2. most of the old games and new will run on Windows 7.  See http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f96cd1de-44ab-4669-89c8-996d92ad491f

• Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?

  Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Backup Windows XP to create the complete image of the system?

  Original title: Windows Xp backup for the new update to reader.

  I want to get a new larger internal hard drive.  However the idea of trying to reinstall all my programs and settings have discouraged me it doing so. My Mac is great in that it allows me to back up my entire system with time machine on an external hard drive, and I can put it all right even if I accidentally erase my whole machine.

  Window xp Backup Wizard can do the same?

  Under the Backup Wizard tool, it seems to be a selection that says that "all information on this computer.  So once I have replaced my old internal drive with the new and improved, can simply paste in my external drive in the USB port and reinstall everything as it is?  is this possible?

  I realized with the technical stuff you just can't assume anything and that things go wrong or you need something more...

  Hi Yes,

  This isn't the functionality of Windows XP. However, you can find this feature in Windows 7.
  Win 7 backup and restore: complete Image of the system expects a full recovery of the system easier if there is a hard drive or a computer failure.
  For more information, see backup and restore: frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• To access the old and new values for alert trigger

  Dear all,

  I have a table ABC, when the user to back-end data updates must be inserted in table XYZ.

  And an alert must draw with OLD and NEW values.

  Can someone help me to achieve this goal.

  Thank you

  Thanks, SY, I didn't think about such a scenario!

  See you soon,.

  Vijay Sehgal.

• Use: OLD and: NEWS in the triggers without oracle for each line

  I use Oracle 10 g.
  I want to insert a row in the table of the newspaper by each Witch of the query is executed on a table.
  And I want to insert on the line at a table of detailed log for each row changed in a query.
  I want to add modification date and time for each line in the two tables of the newspaper and I want it to be similar.
  
  So, I'm curious about using old and new variables without using for each row on the creation of the trigger. Is this possible?
  Or maybe I can score some variables static for this query (so sysdate will be the same and some of the Pavilion for the insertion of small newspapers)?
  Or maybe is there other ways to do it?

  LeopoldStoch wrote:
  But if I use sysdate in each trigger and it will update something as my sysdate 100000 lines will be different for different lines but I want it to be time and on the same date.

  Hi Leopold,

  Then today is your lucky day :-): sysdate is the same for all the DML. Even if it takes more than one second:

  SQL> create table rob
    2  ( id int
    3  , creation_date date
    4  )
    5  /
  
  Table created.
  
  SQL> create trigger t
    2  before insert on rob
    3  for each row
    4  begin
    5          :new.creation_date := sysdate;
    6  end;
    7  /
  
  Trigger created.
  
  SQL> set timing on
  SQL> insert into rob (id)
    2   select level
    3     from dual
    4  connect by level <= 10000
    5  /
  
  10000 rows created.
  
  Elapsed: 00:00:00.37
  SQL> set timing off
  SQL> select min(creation_date)
    2       , max(creation_date)
    3    from rob
    4  /
  
  MIN(CREATION_DATE)  MAX(CREATION_DATE)
  ------------------- -------------------
  07-05-2010 09:29:24 07-05-2010 09:29:24
  
  1 row selected.
  

  You can read more here: http://rwijk.blogspot.com/2008/07/sysdate.html

  Kind regards
  Rob.

• I have a mac pro 3.1. How can I transfer the system to a new and bigger drive?

  I have a mac pro 3.1. How can I transfer the system to a new and bigger drive? The old drive is much too small.

  I'm not familiar with your model computer, but there are several ways to do so.  If the computer can accommodate multiple disks, you can install the new drive next to the former.  If she does not accept another disk, you can in these external adapters for about $30, which allow you to attach a bare drive to a computer with USB.  Then, you clone the internal drive to the new. Cloning is a special form of the copy.  It copies all files including startup system files so that your new drive is essentially identical to the first.

  Double clone - http://www.bombich.com/software/ccc.html

  SuperDuper - http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html (shareware)

  IBackup - http://www.grapefruit.ch/iBackup/index.html (free)

  The restore function of disk utility included in directions of OS X. alarm - http://discussions.apple.com/message/8799711#8799711 (a former post but can still work).

  Clone the old drive to the new, then install a new one.

• Resize the system checkbox and radio buttons system

  Is it possible to resize the system checkbox and radio buttons system. If we right click on one of them and go to properties, size controls are disabled. I wonder if it's feasible.

  Also I noticed that I could add the new radio buttons to do a right-click and choosing Add new button. Is it possible to achieve this programattically.

  Kind regards

  Austin

  AustinCann wrote:

  Is it possible to resize the system checkbox and radio buttons system. If we right click on one of them and go to properties, size controls are disabled. I wonder if it's feasible.

  As mentioned, system controls cannot be customized, because they depend on the windows theme. However, here are some Boolean values, so all you need to do is use an ordinary Boolean value and import the graphics that you want in the case of true and false. They can easily be made to look like an oversized check box. More details, especially about radio buttons can be found here.

  AustinCann wrote:

  Also I noticed that I could add the new radio buttons to do a right-click and choosing Add new button. Is it possible to achieve this programattically.

  You could probably do it in edit mode programmatically by using scripts. You can't do it at run time.

  To fill a RadioButton with new Boolean values, you can simply drag the new values Boolean inside or even shift-do drag an item to create a copy of it. Don't forget to change the labels to something intuitive.

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• my fonts disappeared! When I go to change the system fonts and fixedsys... What do I do?

  I use Vista Home Basic and a little more than a month I've had problems with the script!  All the lines and symbols... I have restored until I can't do a day earlier that when this problem happened!  Finally, I changed the standard windows fonts and I use somethings, but much is still in the symbols (dashes, lines, etc.).  I went into my fonts folder in Control Panel and my folder is empty!  When I go to change the system fonts and fixedsys... What do I do?

  Hi Vickie,

  If you see only the fonts system and no additional (specific program) installed fonts, then you can try the following steps and check.

  Most likely, the fonts are installed on your computer are hidden. Did the same by following these steps.

  Method 1:

  a. open fonts by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking fonts.

  b. now click organize , and then click on folder and search options.

  c. click the display and check to select Show hidden files, folders and drives.

  d. click apply and OK. Check if you see all the fonts.

  (Make sure that show you the files hidden after the repair is done by selecting don't show hidden files, folders and drives.)

  Method 2:

  Try to perform the clean boot procedure and check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  For more information, you can also read the following article.

  The problems of fonts

  You can also read the following article and check.

  Fonts: Frequently asked questions

  Hope this information is useful.

• Running the old and new Vcenters simultaneously on the same San

  We spend VSphere 4.1 to 5.5. We are very weak with only 3 hosts running about 20 comments of the virtual computer on a San.  Our former VM VCenter is always on Win 2003 and I am changing as well.

  So instead of doing an upgrade from 4.1 to 5.5 and convert the former vcenter 4.1, we decided to simply fill out a brand new VSphere 5.5 installation to a new server we have.  We have also installed a Vcenter 5.5 new appliance as well. So, essentially, we have installed two different vcenter, old and new running.  Then, we plan to move hosts esxi 4.1 existing in the new Vcenter device manually.   Then eventually fly over the guests of a host in the new box and then wipe and reload each older host with 5.5

  So I've already finished the first half of this project.  But I have a question.

  During the passage of Windows VCenter 4.1 to the new host esx and VCenter Unit 5.5. I run two VCenter (ver 4.1 and ver 5.5) simultaneously for a short period of a few days.  We're still running on the host 4.1 old and the new vcenter 5.5 running on the new esx host 5.5.

  We will walk a host both the old VCenter and will be added to the new Vcenter 5.5 appliance.  But I'll share my SAN alone of course. If I do this and the two versions of VCenter (old and new) running at the same time and sharing my data SAN even stores at the same time, are there problems with it?  I don't think so, but I'm not sure.

  I installed the first new esxi host and I pointed out to my warehouse of SAN data without any problem. And data warehouses has appeared as they should.  But when I add the new host for the new VCenter, as part of the installation process, it displays all relevant San warehouses.  I thought it was weird to show during the 'Add host' vcenter.  Are there restrictions to running two VERSIONS different VCenter simultaneously on the same data warehouses?

  Thank you.

  HMorris

  You can have multiple instances from running in the same environment vCenter server. What you need to take care of, it's that the ESXi hosts that share the same warehouses not have access to each and other virtual machines (i.e. do not add VMS to multiple hosts). Keep in mind that only VMFS3 data warehouses are available in two versions, do not pass the VMFS data store to VMFS5 when running always hosts v4.1.

  > as part of the installation process, it displays all relevant San warehouses

  That's ok. When you add a host to vCenter Server it will show that all connected, as well as the VMS data warehouses that are stored on this host.

  André

• How to connect the system android and ios?

  my main project is to put a link or for communication between the system android and ios. the controls I should know?

  If you want assistance please provide details as to what you're trying to do.

  Writing an effective question of communities of Apple Support