Free virtualization software takes supported Windows 7 as operating system host and Windows Server 2003 as a guest operating system?

Similar Questions

• BPM and SOA will be supported Windows Server 2003 R2 x 64

  Hello all-
  
  Can you please tell me, BPM and SOA Suite (10g and 11g) can support the following server?
  
  Windows Server 2003 R2 Standard x 64 Edition Service Pack 2.
  
  Thanks in advance.

  Yes

  We are running on Windows Server 2003 R2 X 64.

  Our server is Windows 2003 R2 with 8 GB of RAM

• Linux vs Windows Server 2003 as a guest

  I'm building a new NAS for my home network. After doing extensive research on my OS options, I decided that Ubuntu 10.10 Server and Windows Server 2003 will be used. My question, which OS works better on top of the other, the performance and stability wise? Should I run VMware Server 2.0 on Ubuntu and virtualize Windows Server 2003, or vice versa?

  Here's my hardware configuration. Remember, I use Ubuntu with 3 drives of 2 TB and 3 750 GB drives, software RAID5. Records of 2 to 3, will be attached to a Rosewill RC-218 SATA II controller.

  Thermaltake PurePower 500w

  BioStar TForce 520

  AMD Athlon 64 X 2 6400 +.

  Crucial Ballistix 4 GB

  3x750GB Seagate Barracuda 7200.10

  3x2TB Samsung Spinpoint F4

  250 GB Seagate Barracuda 7200.10 (system disk)

  If you need additional information, feel free to ask.

  Thank you

  Tony

  If you want to either run a single Ubuntu VM on a host of 2003 or run a single VM 2003 on an Ubuntu host?

  Then I'd clearly vote for host of 2003 for the following reasons:

  -installation of VMserver 2 on 2003 is trivial, while it is an adventure on current Linux

  -Host Windows can be configured to return all the virtual RAM inside the actual RAM that is not possible on Linux hosts - which means that a host of 2003 will work better for a single virtual machine

  -2003 is very stable so that a host Linux VMserver 2 tends to leaking memory after long uptimes

  -on a host of 2003, you can easily use the ViClient to manage the virtual machines

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog

• HP deskjet 1050 driver for windows server 2003

  Hello

  Recently I bought HP DeskJet 1050 printer all in one.

  The CD not supported windows Server 2003 OS.

  If the supported drivers are available, then its good.

  Another option I tried was to install on Windows 7, but even this has not worked on.

  If the Setup error message it ' windows 7 ' was mentioned.

  No idea why it isn't install, a lot of work, but powerless.

  Please suggest if a patch is necessary.

  Thank you regarding

  Professional software

  Hi lvanhk,

  Download driver full of features, and then you should have the 7z folder mentioned in the document in my last post.

  Pilot and full features software

• Modem for Windows Server 2003 comments?

  Have a client who we want to virtualize, one of the Windows Server 2003 servers and has a modem attached to it for incoming/outgoing faxes. How would the more successful to get a modem on a box of ESXi 4 through to Windows Server 2003 without problems?

  I would like to watch the series on IP.  You will take ESXi and your material out of the image that's going to be the virtual machine, to communicate with the device.  Digi makes these devices - http://www.digi.com/products/serialservers/ or if you are looking for in the forums, you will see what others use.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• Don't WebFldrs 9.00.3501 software supports Windows Server 2008 R2

  Don't WebFldrs 9.00.3501 software supports Windows Server 2008 R2, Windows Server 2012 R2?

  OT:

  WebFldrs 9.00.3501 software

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

  You can also contact the developer

• Support for Microsoft Windows Server 2003

  Hello

  Can you please let me know the end of support for Windows Server 2003?

  I manage and application that is currently running on Windows Server 2003 and will soon migrate to Windows Server 2012 but the exact date is not decided, as a lot of analysis should be done prior to the actual migration.

  Please let me know when Microsoft end this support for their Windows Server 2003 so that I can work on that accordingly.

  That would be really helpful. Any announcement already made by Microsoft on this? I found a few things online stating it would be 2015, but nothing seems to have come directly from Microsoft.

  Thank you in advance for the information.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action.

  I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action. My network is disconnected, so the automatic update is not an option but I always receive as a vulnerability on the scans. How can I obtain the latest CRL to mitigate these vulnerabilities.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Hi Saif,

  This is not supported for the content... Please check the certificate of the MOS

  Support content 12.2.0.1 MS x 64 64 bit 2012 and 2012R2 and same is applied to the installation of Oracle Fusion Middleware Infrastructure program.

  

  Thank you

  Amey

• Is the database Oracle 11 g Release 2 supports Windows Server 2012 64-bit?

  Hello
  
  We will buy new server on which will be installed (Windows Server 2012 64-bit) operating system. Please let me know if Oracle Database 11g Release 2 (11.2.0.1.0) supports Windows Server 2012 64-bit. If supported, then we'll have license to Oralce.
  
  Thank you.

  See pl http://www.oracle.com/technetwork/database/windows/tech-info/sod-oracle-db-win8-win2012-1853201.pdf

  HTH
  Srini

• Windows Server 2003 R2 explorer.exe crashing

  Hello

  I am looking for help on a PC server.

  All programs work correctly and for all intensive purposes, the server is very good.

  The problem is that explorer.exe crashes every 3 to 8 seconds.

  I had a quick glance at the file hmdp and tbh it means nothing to me.

  Could someone kind take a look on it and maybe point me in the right direction?

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  [C:\Documents and Settings\electrical\Desktop\error files\explorer.exe.mdmp] Dump file loading
  User Mini dump file: only registers, stack them and portions of memory are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows Server 2003 Version 3790 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: Server, suite: TerminalServer SingleUserTS
  Computer name:
  The debugging session: 04:48:47.000 Wed May 29, 2013 (UTC - 07:00)
  System Uptime: not available
  Running time: 0 days 0:00:05.000
  ..............................................................
  Loading unloaded module list
  ..........
  This dump file is an exception of interest stored in it.
  The stored exception information are accessible via .ecxr.
  (b10.700): access violation - code c0000005 (first/second chance not available)
  EAX = ebx 00000200 = 80070000 ecx = 003 has 0038 edx = 00000000 esi = 00000464 edi = 00000000
  EIP = 7c8285ec esp = 00f1a410 ebp = 00f1a480 iopl = 0 nv in EI ng nz cy ac pe
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000297
  Failed to load image C:\WINDOWS\system32\ntdll.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntdll.dll
  ERROR: Module load completed but symbols can be loaded for ntdll.dll
  ntdll + 0x285ec:
  C3 7c8285ec ret

  Any help would be appreciated more

  Colin

  Support for Windows Server is available here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  The forum, you are now aims to help users of the computer at home.