Frequency of Publication of issue?

Similar Questions

• Impossible communication with an electronic card via the USB port of the United Nations

  Hello

  I must communicate with a normal electronic card a mini-USB port / USB (serial, COM4). This card transmits on the airwaves on a frequency range that I must address.

  When I plug, the PC detects it and accept it (I installed the driver). Plug-in the HyperTerminal in Windows XP to send instructions in hexadecimal this carte pour what change the range of frequency on which it issues.

  Furthermore, neither MAX nor Agilent Connection Wizard not the detected and none are able to communicate with it, everytime the same message error "no device detected".

  I tried under LabView to send instructions with assistant IIOA, no results. I also tried the instructions 'Config VISA' and 'Entry VISA', trying to write in hexadecimal and normal mode, nothing works. Under labView I have yet no error message, nothing. Nothing.

  I don't understand. I know that it is still possible to drive it under LabWindows, but under LabView (8.5) nothing, not a clue.

  I have the latest version OR-488. 2

  Y ' have a procedure to follow pour such communication of?

  Thanks for any help that would be welcome.

  Kind regards

  Zoe.

  Hello

  The NOR-488 driver. 2 is the driver for the hardware from National Instruments GPIB; If you communicate to the port of of a USB through, this will not impact your code or on the resources used. The only element in common with your VISA application EST enhancement. It provides a unified API pour different types interface with instruments (series, Ethernet, GPIB, VXI, etc...).

  Under MAX, on cannot hole your communication card, only the serial port. The first chose to do is therefore to ensure that the serial port 4 is clearly visible under MAX. You can then the uti Test Pannel VISA pour send and/or receive orders to/from your card.

  If these elements do not allow you to properly configure your hardware, n 'hesitate to send a capture d' screen of the configuration under MAX. If you have a CVI code that allows you to interact with the map, it might be interesting to join, so you can see how interactions with the material are made.

  Kind regards

• Unique edition, Pro edition & fresh...

  Among the first users of DPS, I see nothing has changed since then, but it turns out some how worse.

  1. If in buying guide, Adobe offers the Professional Edition for the "medium-sized media companies and commercial publishers" how a small business afford paying $619 (Australian Dollar) per month to keep apps in iTunes when we are struggling to introduce a DPS customer? A month, we cannot have any customer, means that we must pay our economies to keep 10 operational apps? and if not, we must explain to our previous customers that "sorry mate, you will pay $619 for your app free stay in iTunes?

  2 - What is the advantage of Pro Edition single edition? We might as well stick with creative cloud as in the end, the iPad app remains alive and we pay all this money for iPhone, Android and... just be in iTunes for 3 weeks! (given the fact that it takes best screenplay 1 week to iTunesConnect to approve our application out 4 weeks subscription period).

  3. what happens if someone wants to have free app? How can we convince to pay every month to keep its free app? He may say, forget the DPS, I get developers to do my XCode application... and it's only recursive...

  4 - not we are ambassadors of Adobe as developers and designers? We work to implement our small businsses but also announce the product Adobe customers. Why Adobe cannot let us take control of our OWN application? I do not say that we do it for free, I'm happy to pay the $619 a month to apply, but I don't think it's right what so ever to pay each month only by the desire to keep!

  5. as you have probably guessed I'm from Australia and since 2011 far AFAIK not even one person has tried to take this serious matter. I contacted Adobe Australia today and nobody answered me and after 3 hours trying to 10 different numbers of 1800 and local someone told me that I have it is not to pay the fee each month to keep my app! He said once you pay the amount, you can keep your app in both iPhone & iPad forever for free! I've got the name of guy with reference number I knew that he has no idea what he's talking about!

  and this guy was the leader and supervisor as the other guy had not heard of DPS at all! He gave me a number American and said sorry Sir, that they are now closed today is thanks giving day! I said, you tell me there is not even a single person in Australia to talk about the product that I purchased? I contacted some resellers in Australia and they said no and Yes nobody never bought Pro Edition or single edition of them yet and I'm the first person seeking and obviously, they were not useful either!

  6. it is not tiny or big is our business. It is also our customers as well. Everyone can afford this tax! The amount of smart phones are more tablets and customers are more interested in having their iPhone for example that the iPad app. How can I convince to pay this fee when I have to be very careful in not going is not too technical on the DDA to sell them?

  7. to cut the story short, I think that it is time now to Adobe to take more seriously the DPS and leave us as those who are interested to use this great package, USE the software and introduce this exceptional offer for those who have not yet heard about it.

  I am sure that just for the sake to publish in iPhone, nobody wouldn't spend so much money just to follow the application.

  8. I am a member. I want to use your product. I have been using Adobe products since the beginning. I think someone should we hear and take fees out of the package and make us pay every time we want to publish, and allow us to have our own app! If not for a small company like mine which is my main goal of DPS, it is better to close the business and work for someone else. Please hear US and HELP Americans WORK TOGETHER BETTER.

  Kind regards

  Calvin Mousavi

  Hi Calvin,

  The person you talked to the Australia Office is correct about the application, but omitted an important part about issues related to the application. If you cancel your subscription pro apps will remain available in iTunes for free. What won't work, however, is downloads of the magazine to the breast of these applications. I'll pass along your comments on how it was difficult to get clarity on this to our sales team.

  Simple editing might be an option for you via Creative Cloud, but keep in mind unique edition apps are supported only on iPads, not on the iPhone or Android devices. In addition, they do not support the multiple problems inside the app, it's just a matter that cannot be updated. This might work for you, if you are creating only publications single issue for your customers, but if they want a magazine that publishes several problems it won't be enough.

  The pricing model for DPS is based on a monthly subscription rate and a download of issue fee. A way to deal with customers must be clear with them as part of your agreement that they create and have a Pro DPS account, pay monthly fees and are responsible for the purchase of additional running beams. Then they can determine based on these costs and their specific business if the DPS is the right solution for their needs in a perspective of cost.

  Neil

• Oracle Lite application test strategy

  I would like to ask, if there is no specific strategies to test an application offline created with Oracle database lite. What type of procedure to follow to test an offline application?
  
  Thank you
  Kapil

  According to our experience, the elements of the test are
  (1) contained data on the client
  Test a number of clients (different settings to create a subset of data), built to confirm that all the expected data are picked up and sent to the client for each. Doing so on the basis of own versions removes all vaiables
  (2) replication of
  series of tests to confirm that all changes made on the server is replicated to the right customers (check inserts, updates and deletions - especially test all selections based on ranges of dates, calculated values such as updating content for elements of the view function and features.)
  Series of tests to confirm that all changes on the clients are uploaded and handled correcly
  (3) performance
  Assuming you are using points to fast refresh, check the PGM compose the timings of process for each element of the publication and issues all take a lot of time and investigate consperf tuning / using. If there are Articles to publication download a lot of data, especially if it is full refresh data tables Ref, look at this change as the download and processing time will be affected
  (4) hours of MGP
  related to appearance above what the cycle time will be when you have the full number of uisers because this can affect your performance. A few Articles in the Publication takes some time by the user, which gives 3 minutes time cycle by user will be ramp 5 hours if you have 300 users!

• frequency DAQ USB issue (6211)

  Hello

  I'm a newbie when it comes to NOR and data acquisition. I bought a NI USB 6211 and connected a resolver with 400 Hz and ai1, ai2 (CSR) (sine and cosine signals). I also have the reference of the power supply connected to ai3 (differential) of signals. Pockets of tension give a +/-2.5 Volts from all sources input signal.

  The problem is that the signal moves to the right. She moves uniformly for all signals.

  Now, I wonder is it possible to synchronize the input signal so that it moves? or what I need to resolve this issue programmatically? I'm programming in C with standard DAQmx drivers (v15.1). But I saw the same problem with Labview and Measurement Studio.

  Thanks in advance for your suggestions.

  Kind regards

  Gerhard

  I guess I just find the answer to my question here:

  http://forums.NI.com/T5/LabVIEW/DAQ-Assistant-can-t-lock-the-signals/m-p/1332484#M542285

  I guess I have to ask in the forum section of C++ for an example of a software lock.

  Kind regards

  Gerhard

• Issue frequency RAM on CQ50 series

  I have a pretty good knowledge of memory speeds when it comes to computers, but even I have a question about a specific memory. Maybe someone out there knows the answer.

  My question is what is causing my main ram to laptops run at DDR2 - 667 mhz. I know for a fact it is PC2-6400 and is able to operate at an external speed of 800 mhz DDR2, but it won't. The default ram to 667 mhz no matter what I do.

  The BIOS was my first choice to change this setting, but as usual the BIOS is locked.  Note to HP, you guys need to stop locking sections of the advanced features of the BIOS. This is a killer of the real deal for any future project, that I had to purchase more HP/Compaq computers. Not to mention the limitations, he puts on the system in general, in other words, it has a * beep * move on your part.

  The system in question is the HP Compaq CQ50 and I modified it with updates of the game. Mainly changed the single core celeron 575 for a Core2Duo T7500 processor. The processor runs at a nominal speed of 800 mhz FSB and chipset GL40 says it supports up to bars of memory DDR2 800 mhz.

  As for the memory, the system has had 2 gb (2x1gb) sticks to 667 mhz and I swapped those out for newer DDR2 800 mhz sticks (2x2gb) for a total of 4 GB. I was disappointed when then start the system and check cpu id to find the speed of the ram was the same, there was just more of it.

  They are adapting sticks purchased at the same time and are registered as PC2-6400 (400 mhz), manufactured by Ramaxel technology with part RMN1740EF48D8W-800 number. Shot of another HP computer.

  Which component on the system board is causing the RAM down the clock like that? I begin to suspect that the BIOS is the culprit because there is no advanced options, or really anything of use in there. Just, I want the memory runs at the expected speed, is there anything we can do about it?

  System information:

  Name: Compaq Presario CQ50 103WM (its been updated since the installed equipment factory)

  Processor: Intel Core2Duo T7500 2.2 Ghz 6 MB cache FSB 800 mhz (original was core Intel Celeron 575)

  Memory: 4 GB of DD2 at 800 mhz (operating at 667 for unknown reason) (has 2 GB of ddr2 667 orginially)

  Graphics card: integrated Intel Mobile 4 series (GL40 Chipset) (also a serious bottleneck, and probably why the ram runs at the wrong frequency)

  Operating system: Windows 7 Ultimate x 64 sp1

  This seems to be the revelant information that future readers will have. If need more information I'll post on request. I feel there will be little or no help here, but I have to try. Otherwise no one would know that the question is there.

  Hello:

  This is not the info I've seen since the specifications of the Intel chipset on the link below... Max is at 667 MHz.

  http://Ark.Intel.com/products/35501/Intel-82GL40-graphics-and-memory-controller-hub

• Issue publication: image missing

  I recently updated my site with presentations of lightbox. Everything works perfectly at the premiere, however I have exported the site in HTML and uploaded to the server using FileZilla and oddly, on one of my pages and the image is gone. Any ideas what's past?

  Here is the page with the image missing (the gap in the grid): http://http :// www.stephenbrandes.com/paintings.html

  The SHARED_UNKNOWN_ERROR:22 is because your Business Catalyst are also incorrect

  Please check the solution mentioned in this post to get rid of this issue - download business catalyst authentication failure .

  Kind regards

  Ankush

• Issue of publication/Subscriber ETL

  I have a question about the use of publish/subscribe CDC with ETL on Oracle 10 g. Is the part of logic on the part of the Subscriber ETL code? In other words, when the Publisher is notified of a record of the change and sends the record to the waiting area, then calls the Subscriber. Is the Subscriber that implements the ETL logic that treats the recording before being sent to the DW/Dim tables? Something like this stream:
  Target database source-> change table/publication-> Subscribe view/ETL-> database

  Mark this thread as answered, you will find this option in the upper left corner

• Publication on BC issues

  HI -.

  I've been all weekend on the publication

  http://ariannaquartet.BusinessCatalyst.com/index.html

  and I was fine - preview the site, as I have this new audio widget Musegrid which does not work in preview mode.

  Suddenly - the "Site name" disappeared in the edition window and I also get an error message "the list of data centers not able" - also "request failed" in the center of the Date and publish reading...

  I have not had problems so far - please advise - thanks!

  Hello

  Have you tried to reboot the Muse and see if that fixes the problem.

• Frequency image-refreshing issue

  Hello

  I had this problem: I have display 3 different images in a sequence. Entire sequence 1 last second (0.3333 by image) and will be continuously repeated. During this operation, I have a few display problems - some occurs flashing white in the photos. It is difficult to see because photos have black background. These flashes appear as white strips or fields oriented horizontally in a different part of the picture. I think that it is a refreshing question, but I'm not sure about this and don't know how to check. I failed to do screen capture of these hot flashes, which seems to confirm that this displays some question. I want to know what you guys think about this, if it can be solved, it's my hardware problem or some sort of limitation of LabVIEW. I checked it on 3 different screens (screen of my laptop, my PC LCD screen, projector) with a refresh rate of 50-60 Hz and the results were the same. I tried with different image resolutions and I think that these hot flashes are more common in the larger images.

  I enclose all VI I use to display these images and pictures of reference for you to check if you have this problem.

  A few words about the functioning of this screw:

  There are 2 screws - order one and displaying a. I need the way I want to have images displayed on the second monitor, while being able to adjust front on the 1st monitor. So there is this VI display which shows only images and VI Controling that defines all parameters. To get this to work, you must open with VI and do turn. Then you open ControlingPredefine or ControlingGenerated, the value:

  Interval (time between photos, 333 change is my case).

  Path to VI (this must be the path of the VI to display)

  Monitor (0 - main screen, 1 - second screen if you have.) I did it this way I was check with features different monitor (laptop vs single computer laptop + projector))

  and run it. When set correctly display Vi should be enlarged on the set of monitor in the monitor control and display 3 photos in the meantime

  There are 2 screws in order:

  Existing predefined on jpg images work chosen hard drive (there are 3 additional controls of path that must be resolved before the race)

  Generated generates images in real time, you can choose between 2 figures (square/circle) and set of 3 sizes (each for each photo in the order)

  Controling Vi stop button stops the two screws (control and display).

  I am attaching 2 photos (small and large) made in the painting series.

  My version of LabVIEW is 2011

  Hi Chudy.

  Can you please turn off the property picture "delete first"?  As long as this option is set, the image will erase whenever you write a value to the image.

• NEITHER 9212 - issues with sampling frequency, number of samples and size of buffer or slowness comes together with thermocouple module

  To begin with, I am very new to labview and unfortunately on that my first task is to build something rather complicated for a project that my company works. Fortunately it is especially followed rather than control critical processes.

  Currently, I have a cDAQ with modules, DI, AO, and TC.

  cDAQ-9133

  NEITHER 9472

  NEITHER 9421

  NEITHER 9263

  NEITHER 9205

  NEITHER 9212

  I'm currently running read-write for all 5 of these modules in parallel while loops and analog and digital inputs/outputs modules that all work as expected. Each loop requires 1 sample per channel through the wizard DAQmx etc for each module and I got can interact with all the asyncronosly inputs and outputs which at the moment is the goal. I can switch power switch for each module save memory, or if the need arrives later.

  My problem is that the module TC (NI 9212) when tilt on which allows the acquisition of sample 1 loop seems to take much, much longer to collect samples. I have played with different acquisition parameters and can seem to get a continuous flow of data when you use streaming samples, or even when specifying N-samples but I come in questions where the "application cannot catch up with the hardware.

  I tried to find an optimal number of samples/sampling, rate, etc I can get an update of temperature more than every 1 to 2 seconds, but if I set the number of samples that are high enough to apparently get a constant flow, what ends up happening waveform graphs seem to lag behind the actual data, and that's where I get errors. I only want 1 sample per channel per cycle anyway. Yet once, all the other modules in the cycle with less than 100ms delay between acquisitions but the module thermocouple ends up being 1-2 seconds. It's okay because in our application temperature should not rise/drop very quickly but its boring nonetheless.

  I have the acquisition set up for the same (NI 9212) thermocouple module was like my modules of analog and digital inputs (NI 9205 and NI 9421) take 1 sample every time the task is called so I'm having a hard time understand why do the same for the TC module introduced such a delay. Max sampling rate is supposed to be 95 samples/s/ch, so I guess that the delay must come from call the task over and over again in a loop.

  Synchronization and how you have configured the 9212?

  In the case of high resolution, it can reach 1.8 samples/s. see page 7 of the plug technique here for rates for the supported modes:

  http://www.NI.com/PDF/manuals/374389a.PDF

  -AK2DM

• independent recording frequency of the frequency of sampling and other issues

  Hello

  I just got a new NI DAQ, compact and am currently trying to get LabVIEW to read from multiple channels on this subject.

  In short, I have an input for thermocouple and a current input on my Board and I want to do is read from multiple channels on each module. However what I would like is for the display of the user to be updated in real time of these readings, then that I only want to open a session (or write to the file) all values at a rate of once per second.

  at the moment I can do either both in 1 second (which makes the clunky and slow user interface) or I can do both very quick which makes the nice user interface, but the journal file massive.

  Also I have questions about access to data acquisition channels and whether I need a producer consumer loop if I am only wanting to log every second.

  First data acquisition:

  To access my strings, I used the virtual channel NI DAQmx create VI and wired the necessary things. Now it works, but I wonder now, how can I change this option to apply some scales to each channel individually. I have 5 pressure sensors with slightly different min and max outputs (data calibration). I thought I could do this by specifying a project task, but it gives errors saying that I have duplicate layers or something. Essentially, each channel has its own custom scale.

  Producer/consumer

  Do I need to bother with a producer consumer? I thought it is a pretty nice way to ask things, especially with a queue, but really if I connect 1 times per second, the queue will never really have more than 1 thing in there. In addition, I find myself with an array of pressure measurements and an array of measure of temperature against time and queue wants a string input. So it don't work anyway.

  Is it possible to put a slower loop inside a quick loop to check?

  Thank you

  Alex

  
  

• I have a problem, I'm done to develop the digital magazine Im want to start the process of the publication of this magazine, Im trying to find the link frm which I can buy single issue magazine publishing. I want to just publish this magazine, it is not p

  Can u be please tell me where do I buy a single edition, I think it cost US $399.9.

  Hi Emi233 - it's a little hidden and I searched for a while, not too long ago (you know that a cloud subscription is cheaper right?) ... it is under the heading products and then click all - or follow the link below:

  https://www.Adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softwar e_sl_allsoftware.html? start = 40

  I hope this helps!

• Issue publication in Amazon

  Hello! I have a problem, try to publish in amazon app store.

  In the Amazon they tell me that the app must be HD optimized, and then I get an email saying that it was a mistake.

  I tried the .apk and it works fine

  Someone has an idea of what I might hurt?

  Thank you!

  

  It seems that the failure of the device-specific a HTC device. I'll make sure that you marked the app that you submit to Amazon in which case Amazon devices, while submitting a separate application for Google play.

• Audio synchronization when the publication issues

  When I publish MPEG two 1920 x 1080: 30 and: 25, loses the audio sync.  Any suggestions

  Thanks Steve, I'll try that.  It should do better than now.