Frequency of the RAM?

Similar Questions

• Question on the frequency of the RAM - Tecra M5-384

  Hello, everyone!

  I am considering buying a Toshiba Tecra M5-384, but there is one thing that concerns me - system memory. In the specifications , it is written that the technology of system memory is DDR2 533 MHz.

  This means that I can't use DDR2 677 MHz?

  Hello

  I am not a technician, but in my opinion, you should always use tested and absolutely recommended hardware components. That s my general opinion.

  You can use module more fast but be realistic. Do you really think this will help? AFAIK slower module will be running 533 MHz. The best thing you can do is to increase the RAM to max level using modules of memory live recommended. On this way, you will be sure that everything will be ok.

• Satellite L300 PSLB8E - how to increase the ram clock speed

  I have a laptop which is equipped with 2 slots for ram PC2-6400
  1 - Samsung module M4 70T5663QZ3-CF7 [800 MHz] 2GB
  2 - Samsung module M4 70T2864QZ3-CF7 [800 MHz] 1 GB
  GPU: Intel GM45
  Processor: Intel Core 2 Duo T5870 Mobile @ 2000 MHz
  According to the manufacturer, this kit allows you to work with the 667/800 MHz memory speed, but the problem is that reference programs show the actual frequency of the ram at 399 MHz.

  Question No. 1:
  (a) why not clock the memory works in 800 MHz but only 399 MHz,
  (b) how to change to a 800 MHz

  Question No. 2:
  I'm going to buy a processor
  Penryn Core 2 Duo T9600 processor (1066 MHz FSB) (2.80 G) Hz or T9400 (2.53 G)
  and install it in the computer
  and increase the memory of 2 x 4 GB 800 MHz (8 GB)

  I explained that this possibility is provided for by the manufacturer according to the Maintenance Manual for:
  Toshiba computer
  Satellite L300/L305
  Satellite Pro L300
  EQUIUM L300
  SATEGO L300
  (PSLB8x/PSLB9x)
  (PSLBAx / PSLBBx)

  If this operation will help to improve system performance

  I put t know what programs you use and if it is good or not if this info can be good and perhaps not. I put t know. The fact is that you n t have one any influence on the functionality of memory and I doubt that you can do something and change some values.

  Exact specification for laptop laptop does not for me but I think that Satellite L300 must have Intel GM45 chipset and I presume that for your motherboard FSB is 667 MHz. You can improve up to 8 GB and compatible 4 GB RAM module has PA3670U-1M4G part number.

  Upgrade CPU on Satellite L300? I put t know man. A friend of mine has this model of laptop and I don t know if it's the right decision to spend money to upgrade this old model of laptop budget.
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Satellite A200-1TS - question on the frequency of the DRAM

  Hello

  I have the Satellite A200-1TS with bios vista x 64 vers.2.60 and I upgraded the RAM with (slot 1 and slot 2) each module 2 GB 800 MHz, and work, but the cpu - z program is detect the TIMINGS TABLE frequency is what is good for 800 MHz to 400 MHz, but the DRAM frequency is always working with 332,5 MHz (667 mhz).

  What is the problem? Can I do something to work at 400 MHz?

  Hello

  I think that the RAM works on 333 MHz because it s always according to the FSB of the processor.
  It seems therefore that the CPU has a 333 MHz FSB and RAM also runs on this speed.

  If you have any other questions, please let us know! :)

• Satellite C50-B-12Z - to upgrade the RAM up to 8GB

  I have Satellite C50-B-12Z, and I want to improve his memory of 8 GB of ram. Crucial memory site says that with my laptop is recommended 8 GB ram 12800, but would be less expensive to put a barrette dimm 4 GB of ram, since my laptop already has 4 GB of ram?

  Is it possible to have the problem since the RAM dimm fault its Samsung and I want to install a memory of brand? (all other spec of ram are identical, frequency, voltage, etc.) ?

  Hello

  At first some basic on your laptop model info: you are right, it can be upgraded up to 8 GB of RAM. Your laptop has two RAM slots, and according to specification for laptop, there must be a 4 GB so strips you need to do is add the second module of 4 GB.
  It is always recommended to use two identical modules.
  Original 4 GB of RAM has part number PA5104U-1M4G, so I recommend get you the same.

  Problem is that your machine is not supported for upgrading RAM by user and access to the RAM slots is quite complicated. The whole bottom cover needs to be removed and it must be done by the authorized service provider.

  If you try to do it yourself you will lose the warranty.
  My advice to you is to contact the nearest Toshiba service provider and pick up some info on this.

• Pavilion 15 p-020tx: update of the RAM, Pavilion P 15-020tx

  I want to improve my RAM. It currently has a 4 GB of unique RAM installed with an empty slot. Recently I bought 8GB DDR3 RAM with the same frequency of 1600 MHz but my laptop does not detect it.
  Well trying to tell me is possible to increase my RAM and how?

  I found a solution for my problem.

  There are two slots for RAM in my laptop and I think that one was primary (where original RAM was installed) and other secondary (empty housing).

  Unfortunately, by updating my RAM memory, I changed the position of the RAMS. either I put new RAM (Corsair 8 GB) in the main location (where my original RAM was installed by HP) and placed originals RAM (4 GB) in the secondary location. So my system detected no additional memory.

  Now the positions of the Rams stayed original and my system has detected an additional memory so and showing 12 GB of RAM.

• How you upgrade the RAM on Mac mini (end of 2014)

  The Support page says it is not accessible, but everything is assembled (without guarantee) just to write this post in Safari with open iTunes I am hitting 3.3 4.0 GB.

  I've always liked Apple since the first iPod came out, but I didn't know that their computers were also disposable.

  I guess I should know better when the price is only a little higher then the Apple TV, I went to buy, but it's the first Apple computer, I buy, and it's better than my Apple TV ver1 who died.

  So when I cut it open I find accommodation from the PIN and what chip will take the 1.4 GHz, 4 to 8 GB machine.

  I guess there is only one slot (pinout) and it is probably welded in.

  No, they were serious

  the RAM is welded in there. You can not remove it.

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• Upgrade the size of the RAM in the MacBook Pro

  Hello

  It's SheikAbdullah. I'm on MacBook Pro (13-inch, mid 2012) model. The RAM size is 4 GB. Now, I am planning to update. Can I switch from 4 GB to 8 GB (2 x 4 GB) or 4 GB to 16 GB (2 x 8 GB). Could you please suggest here

  Thank you

  16GB compatible.

  https://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade

• Removing and installing the RAM several times can affect to my Mac Mini?

  My little brother back RAM on my Mac Mini many times; but it remove the RAM properly and install it correctly

  Removing and installing the RAM may affect to my Mac Mini?

  Mac Mini (late 2012)

  OS X 10.11.5

  No, it should not affect the machine when the withdrawal/re-installing memory - correctly.

  My second thought about this - why it has removed/re-installed memory several times?  Trying to upgrade the drive?  change a component any?  repair?

  Materials only I 'played' were - SSD, adding second HARD drive disk with data doubling cable, insulating modular wifi/bluetooth, etc. and of course, the upgrade memory.  Once they did that, I got very little intention of reopening the mini - except air jet, clean the fan.

  Sam

• Use of the RAM of Firefox causing accidents?

  In the last three days, I have observed a new problem with my Firefox. I never had this problem before.
  If I load any text or images on a tab, it causes the RAM to increase usage. Its use does not diminish over time, and sites such as Facebook and 9GAG, with long flow of images and text, can cause the use of RAM go more than 2.5 Gigabits. Once it reaches this threshold, Firefox crashes. Manually close Firefox also removes the use of RAM, although the closing of tabs does not work.
  I scoured the list help accidents, even if nothing is done.
  I am running the latest version of Firefox (15.0)

  (Note: problems still occur with the functions below disabled)
  Add-on:
  Adblock Plus 2.1.2
  AVG does not follow the 12.0.0.2189
  Greasemonkey 1.0
  Memory Fox 7.4 (attempted solution to problem, does not work)
  Print Helper 2.5
  TinEye Reverse Image Search 1.1
  Xmarks 4.1.2
  Plugins:
  Adobe Acrobat
  iTunes application detector
  Java Deployment Toolkit
  Microsoft Office 2010
  Pando Web Plugin
  Shockwave Flash
  Silverlight plug-in
  VLC Web plugin
  Windows Live Photo Gallery

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I need to upgrade my Mac (MacBook white unibody mid 2010) with a SSD (and iMac mid-2010) and the RAM and SSD

  I need to upgrade my Mac (white unibody MacBook mid-2010) with a SSD (and iMac mid-2010) and the RAM and SSD: I look to buy upgrades site Crucial and OWC site and there is a little difference, in terms of money: it's better to buy the Crucial site or OWC site.

  MacBook, OS X El Capitan (10.11.4)

  < re-titled by host >

  They have good tools to find compatible parts for your Mac models.  The OWC took is here

  http://eShop.MacSales.com/MyOWC/

  OWC tends to have the most detailed information on the Mac.  If I look to the top of the part to OWC and review specifications.  OWC offers often information based on the Mac-specific tests.  If Crucial offer something similar for a substantially lower price, buy it from Crucial.  I'm sure they have a refund is not political, if a part they say is compatible.  I bought the RAM and SSD both Crucial and OWC.  From my experience, be it high quality.

  For the 2010 iMac, OWC also offers a "kit" (with the tools and support) to replace the hard drive of 3.5 inches with a 2.5-inch SSD.  Eventually, if it's a 27-inch iMac, I think that you can Add the SSD instead of replace the hard drive.  And they have self-produced how-to videos on the process, related to many of their lists of products.  OWC provides a lot of information with added value and service for Mac users.

  OWC also offers kits to replace the optical drive on some Macs (including MacBooks) with an SSD (as a secondary internal drive).

• Great use of the RAM in the new MacBook Air?

  It's the first time I've owned a Mac and it is currently a week. I use every day since it arrived (watching videos, using the word and research). Recently, I found my way on activity monitor, 7.5 GB of physical memory to 8 GB was in use - 3 GB of this was kernel_task. I stopped all open windows, so it is now 1.11 GB, but it still seems way too high. That said, I know nothing of what it should be, so I would like to know if this is normal? If this is not the case, what I can do to lower the kernel_task? (In addition, the kernel_task is GB 25,42 disk tab, should I worry?)

  Set apart this, nearly half of the RAM is still in use and I would like to know if it's too normal - for such a new mac.

  The system was not slowed down at all, while I use it, but if there is a problem, I would like to know before it becomes a problem. If the problem comes from the manufacturer and not how I use the mac, I of the ofc as contact with Apple.

  Features: 8 GB of RAM, Intel Core i5, 256SSD

  Captain El in OS X, version 10.11.4

  Thank you!

  PROCHLOR wrote:

  Set apart this, nearly half of the RAM is still in use and I would like to know if it's too normal - for such a new mac.

  Yes, it's normal.  On operating systems newer, the OSX tries to use as much RAM is available for maximum efficiency.

  The new setting is the PRESSURE.  If it's Green, everything is good.  If she turns to orange or red, then there may be issues that need to be addressed.

  Ciao.

  Addendum: You can find this informative Apple support article:

  https://support.Apple.com/en-us/HT201464

• Suddenly very slow - being report attached - it's just the ram?

  
  

  
  

  
  

  Hi all

  
  

  my macbook suddenly turns very slowly, he has been allowed recently after some graphics clamping because it is so old!

  
  

  things are critical.

  
  

  If it's just the ram, (I doubt it, but maybe wrong!) can someone help me with my maximum?

  
  

  I think that his officially 4 (2 x 2), but remember reading that a 4 + 2 can work?

  
  

  Thank you

  
  

  Paul
  

  
  

  
  

  
  

  
  

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-13 13:35:22

  Download EtreCheck from https://etrecheck.com

  Time 06:22

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Suddenly very slow - opening system same pref is delicate. posing for the window of the attachment in mail for mac can take 2 minutes. No process obvious defect. Mac Word fails to meet very often. I hope someone can help! Thank you

  Hardware Information: ⓘ

  MacBook Pro (17-inch, 2.4 GHZ)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro3, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  2 GB RAM - Insufficient RAM! Extensible - [Instructions]

  BANK 0/DIMM0

  1 GB DDR2 SDRAM 667 MHz ok

  BANK 1/DIMM1

  1 GB DDR2 SDRAM 667 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 5

  Video information: ⓘ

  GeForce 8600M GT - VRAM: 256 MB

  Color LCD 1680 x 1050

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since the start time: about an hour

  Disc information: ⓘ

  FUJITSU MHW2160BHPL disk0: (160,04 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  The PR (disk0s2) MacBookPro /: 159,18 GB (28,37 GB free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Apple computer Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. LaCie.ScsiType00 (1.2.11 - SDK 10.5 - 2016-04-13) [Support]

  com.jmicron.driver.jmPeripheralDevice [no charge] (2.0.4 - 2016-04-13) [Support]

  com.lacie.driver.LaCie_RemoteComms [no charge] (1.0.1 - SDK 10.5 - 2016-04-13) [Support]

  [no charge] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5 - 2016-04-13) [Support]

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 150 tasks Apple

  [operation] 55 tasks Apple

  [killed] 22 tasks Apple

  the 22 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.Kerberos.kdc.plist [failure]

  [loaded] 46 tasks Apple

  [loading] 152 tasks Apple

  [operation] 77 tasks Apple

  [killed] 12 tasks Apple

  12 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.epson.Epusp.plist (2009-07-06) [Support]

  [operation] com.flipvideo.FlipShare.AutoRun.plist (2010-10-11) [Support]

  [loading] com.lacie.eventsactions.launcher.agent.plist (2012-08-14) [Support]

  [operation] com.motive.alertDetectorHost.plist (2014-09-06) [Support]

  [operation] com.motive.userAgent.plist (2014-09-06) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

  [operation] com.freemacsoft.appcleanerd.plist (2014-09-28) [Support]

  [failure] com.lacie.desktopmanager.service.plist (2012-08-14) [Support]

  [operation] com.motive.systemDaemon.plist (2014-09-06) [Support]

  [operation] com.sonos.SonosLibraryServer.plist (2016-03-16) [Support]

  [loading] com.sonos.smbbump.plist (2014-08-10) [Support]

  [loading] net.sourceforge.MonolingualHelper.plist (2012-11-13) [Support]

  User launch officers: ⓘ

  com.apple.SafariBookmarksSyncer.plist [loading]

  Items in user login: ⓘ

  None

  Other applications: ⓘ

  [loading] 386 tasks Apple

  [operation] 158 tasks Apple

  [killed] 35 tasks Apple

  Plug-ins Internet: ⓘ

  npMotive: 1.0.0 - 10.7 SDK (2014-07-28) [Support]

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-01-14)

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-11-27) check the version of

  Default browser: 601 - SDK 10.11 (2016-01-14)

  OfficeLiveBrowserPlugin: 12.3.5 (2016-02-09) [Support]

  RealPlayer Plugin: unknown

  Silverlight: 5.1.20913.0 - SDK 10.6 (2013-11-17) [Support]

  iPhotoPhotocast: 7.0 (2012-11-13)

  3rd party preference panes: ⓘ

  Fan control (2007-10-03) [Support]

  Flash Player (2016-04-05) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  MacBookPro PR: disk size: 159,18 GB disc used: 130,82 GB

  Destinations:

  Time Machine [Local] backups

  Total size: 0 B

  Total number of backups: 0

  An older backup: -.

  Last backup: -.

  Backup disk size: too small

  Save the size 0 B < (disc 130.82 GB X 3)

  Top of page process CPU: ⓘ

  7% kextcache (3)

  4% kernel_task

  4% WindowServer

  3% activity monitor

  1% mdworker (8)

  Top of page process of memory: ⓘ

  Kernel_task 311 MB

  150 MB com.apple.WebKit.WebContent

  Mdworker (8) 94 MB

  63 MB activity monitor

  49MO Finder

  Virtual memory information: ⓘ

  60 MB of free RAM

  1.94 GB used RAM (502 MB cache)

  2 MB used Swap

  Diagnostic information: ⓘ

  April 13, 2016, 12:54 ~/Library/Logs/DiagnosticReports/suggestd_2016-04-13-125400_[redacted].crash

  /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

  April 13, 2016, 12:47:39 PM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-124739_ [redacted] .hang

  / Applications/Microsoft Office 2008/Microsoft Word.app/Contents/MacOS/Microsoft Word

  13 April 2016, 12:27:03 self-test - spent

  April 13, 2016, 11:27:19 AM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-112719_ [redacted] .hang

  the 2007 17 "MBP may be increased up to 6 via a 1 2 GB and 1 GB a 4 GB PC2-5300 DDR 2 667 MHz. chips

  2 GB, trying to run 10.11 and then DO something ELSE that the operating system will stretch this system.

  more RAM will give this computer room to breathe when he tries to run this OS.

  I recommend these guys to the United States, and they also have a European distribution

  http://eShop.MacSales.com/MyOWC/upgrades.cfm?model=268