Has my Optiarc DVD RW AD-7200 ATA device (slot 0) does not work.
It shows a code 39 (Windows cannot load device... driver driver may be corrupted or missing). Can I just download a new driver from device and install or I buy? If so, is there a legitimate site for this sort of thing? Sorry for the newbie question.
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.
I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.
A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»could someone help please.Thank you.Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html=======================================
As needed check with the Sony Support, their drivers and documentation online and ask in their forums
on the problems known.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
device driver was not installed optiarc DVD RW AD 7581 ATA device
Graduated fron windows vista home premiun, Ultimate and optiarc dvd rw ad-7581 ata device will not work. How can I fix it?
Hello
Check with the Maker system and/or the manufacturer support and Forums real player
(if any). There is no reason for the reader who has worked on Vista HP does not play
on Vista Ultimate.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?
My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.
-
Optiarc DVD RW AD - 7560A ATA DEVICE do not work
My CD-ROM/DVD-ROM does not work. Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
1 device state poster (this device cannot start. (code 10)).
2 update driver... shows that the best device driver software is already installed.
3. it is the driver of manufacturing.
4 driver provider Microsoft Driver version - 6.0.601. 18000, manufacturer-(Standard CD-ROM drives)Hope that enough information... Oh, my computer is computer laptop Windows Vista Service Pack 1, Sony VAIO - VGN-NR22OE.
Grateful for any advice...
Hi Nikki 801,
Can you please try these steps? Be very careful when you edit the registry. If you would please do not delete anything immediately. If you must please the following steps... If upper and lower filters is not in this registry key, simply leave the registry.
To resolve this problem, remove the affected filter drivers. To do this, follow these steps:
- Click StartCollapse this includes this image
type regedit in the Search box, and then click regedit in the programs list.
Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password, or click continue.
- Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
- In the pane, click UpperFilters, and then click Remove.
- Click Yes to confirm the deletion of the UpperFilters registry entry.
- In the pane, click LowerFilters, and then click Remove.
- Click Yes to confirm the deletion of the LowerFilters registry entry.
- Exit the registry editor and restart the computer.
If you please you would follow with me as best as possible, I'd be very happy.
Thank you
Aaron Griffin
Support engineer
Microsoft technical support - Click Start
-
error 39 for optiarc dvd rw ad - 7503b ata device windows Vista
My optiarc DVD RW AD - 7530B IS NOT WORKING in WINDOWS VISTA
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Optiarc dvd rw ad-7560 ata device s
My CD-ROM/DVD-ROM does not work. It says on the Device Manager "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I want to try these steps I read on the forum:
Can you please try these steps? Be very careful when you edit the registry. If you would please do not delete anything immediately. If you must please the following steps... If upper and lower filters is not in this registry key, simply leave the registry.To resolve this problem, remove the affected filter drivers. To do this, follow these steps:
- Click StartCollapse this includes this image
type regedit in the Search box, and then click regedit in the programs list.
Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password, or click continue.
- Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
- In the pane, click UpperFilters, and then click Remove.
- Click Yes to confirm the deletion of the UpperFilters registry entry.
- In the pane, click LowerFilters, and then click Remove.
- Click Yes to confirm the deletion of the LowerFilters registry entry.
- Exit the registry editor and restart the computer.
If you please you would follow with me as best as possible, I'd be very happy.
Thank you
Aaron Griffin
Support engineer
Microsoft technical support- Proposed as answer byAaron - Support EngineerWednesday, March 18, 2009 03:13
- Marked as answer byBrian-Support EngineerWednesday, March 18, 2009 14:05
BUT! My problem is that I can't find the UpperFilters on the right pane, only the LowerFilters. Should I proceed by simply deleting the LowerFilters? It would cause damage to the system?Hello
Code 39 means that the driver is corrupted or missing.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
- Click Start
-
Tried updated driver and the Microsoft Automated Troubleshooting service who could not solve the problem. If I put a disc in the DVD tray with the intention of reading, you can hear the disc for about 20-30 seconds then silence analysis. Never, AutoPlay opens the disc. Help!
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Please start from the top and do ALL this, although you could have done some before as is often the
all operations which solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. If the player does not then continue to the next step.Normally the above will solve this problem otherwise working your way down through them, even if you did
them before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsHope these helps.
Rob - bicycle - Mark Twain said it is good. -
Optiarc DVD RW AD - 7530 ATA device - code 19 b
I received the error message above, I followed the online help and UN installed restarted and re installed, this could not, Mr Fixez_ tried the Microsoft, there is no, I attempeted to repair via regedit, but there is no less than remove, filter filters only superiors, seeing that I'm stuck for what to do now Please help me fix my dvd...
Thank you Michael
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.Normally the above will solve this problem otherwise working your way down through them, even if you did
them before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsSome DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Optiarc DVD RW AD - 7560 ATA device stopped working, code 39 how and what to do?
IM using pc acer 4920 have been awhile this optiarc DVD RW AD - 7560 A ATA device no longer works with code 39. I your ipinion, thank you! xxx
Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Optiarc DVD RW AD - 7640 ATA Device cannot read DVD
When I insert a CD or a DVD, Windows Vista does not recognize the disc. If I double-click on the disk drive in Windows Explorer after that I insert the disc, I get the following error message:
Insert the floppy
Please insert a disk in the drive ( DriveLetter :).)Help, please.I tried everything that is published in previos sections but nothing works.Hello nikasru,
· Your DVD player was working fine at all times before?
You can try the below link which will automatically diagnose and repair problems with your CD or DVD drive trying to read or burn media.
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
my account has been hacked had backit is Arabic, I tried to translate does not work help
Unfortunately my account has been hacked. I have it back now, but it of in the translation of Arabic.Tried, but does not not for the entire site. Please can you help.
Unfortunately my account has been hacked. I have it back now, but it of in the translation of Arabic.Tried, but does not not for the entire site. Please can you help.
You did not bother to tell which e-mail program you use. Maybe one of them?
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
Help can not read the DVD in my area, how can I change the ITI now or not at all.
Hello
It's design is if the region has been changed 5 times or more:
DVD region information
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threadsDVD region code
http://en.Wikipedia.org/wiki/DVD_region_codeYou can buy devices that claim to be region free and software that claims to be able to
other regions to read even if I have no experience with those.Region Free DVD Player Information
http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.htmlRegion Free & Code free DVD player information
http://www.dvdbuyingguide.com/codefreedvd/bigfaq.htmlForums - a lot of expert real help
http://Club.myce.com/I hope this helps.
-
Problem with Optiarc DVD RW AD-7561 ATA Device
Hello. Have the same problem as the user with the AD - 7650 A device. for example! and shows incomplete details in the registry. Can I use the same solution for the model AD-7561 or do I need a different key? Thank you
Marg
Hi Marg,
Cause of this problem: A registry problem was detected. This error may occur if one or more of the following conditions are met:
· More than one service is defined for a device.
· There is a failure opening the service subkey.
· The driver name cannot be obtained from the service subkey.
To resolve this problem follow the steps mentioned below
Step 1: Uninstall and reinstall the drivers.
You must be logged on as administrator to perform these steps.
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. in Device Manager, locate the Cd\dvd drive, and then double-click the device name.
3. click on the driver tab and then click on uninstall the driver, and then follow the instructions.
Restart the computer in last good Configuration on the known (LKGC), it is given the registry to the last successful configuration.
To restart the computer in last known good configuration, follow these steps
Step 2: Start the computer in LKGC, to do this, follow the steps below
Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Boot advanced options, select the menu LKGC
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Now check if the problem is resolved
Reference:
Explanation of error codes generated by Device Manager
http://support.Microsoft.com/kb/310123
Device Manager error codes
http://support.Microsoft.com/kb/953933
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the disc when inserted
Cannot read any disc, I put in the drive. I tried to uninstall the drive and restart without result. I also tried the upper and lowers them retreat to the registry and nothing. Ive tried the fix from microsoft and it is unable to help as well. Ive shot in car and handed in did not help. now when I put k say nothing happens, but when I click on it in the menu it says insert the disc and opens even when a disc is already in it. It's very embarrassing and frustrating.any help would be greatly appreciated. Thank you
BTW, sony vaio laptop and windows Vista edition Home premium
Have you all? Check with your system manufacturer, the manufacturer of the device and the myce.com
forums for the exact registry entries you need. And of course the drive could fail.It is sometimes useful to restart at the top and work down through them carefully as the
Difficulty is often a combination of efforts.Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
I want to prevent access to the ' topic: support ' page. How to accomplish this task?
-
Portege R830-10V - connection UMTS falls down very often
Hi allI have a SIM card in my laptop I've used in a netbook before Samsung. With the netbook, the link never broken. But with the 10V, happens every 20 or 30 minutes. When the connection is lost, I have to restart the laptop to connect again. If I tr
-
Can satellite L450-136 - I install Windows XP?
I just got a Satellite L450-136 with Windows 7 and all loaded Toshiba Utillities. I don't like Windows 7 and many prefer Windows XP.Can I remove all Windows 7 and install Windows XP on this laptop? Thank you.
-
Satellite L500 - 19 X - Webcam watch dark photo
I bought a Satellite L500 - 19 X last week only to tackle use it and Windows 7. Problem is the webcam is very grainny and the room that I use laptop is bright but the web cam gives the impression that the room is dark. My friend bought the same lapto
-
tried to download an excerpt from Xd...
Preview download tried Xd. He says his "downloading" but nothing happened at all, because I clicked on the "Download" button initial.