Fresh install W7, HP Envy 17, network controller problem.

Similar Questions

• Portable HP2000 - fresh install Win7 32 - is not correct controller network / wireless network drivers

  I just did a fresh install 32-bit Windows 7 and can not find the right network / wireless network drivers. Unable to connect to the internet.

  I tried all the current drivers found on http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=5118...

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Win7 32 bit

  AMD APU E-450 WITH RADEON HD GRAPHIC 1.65GIG

  Hello:

  This wireless driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• NETWORK CONTROLLER PROBLEM

  Hello!

  I just installed windows 7 in my laptop HP G42-475DX and it seems that I am not able to connect to wireless netwrok.

  When I check the devices and the prinrters, I noticed:

  Network controller showing a yellow own with! When I clicked on Netwrok controller, he said:

  Device type... Other devices

  Manufacturing... Unknown

  Location... PCI bus 2. device 0 function 0

  Device status

  Drivers for the device are not installed. (Code 28)

  When I looked for detailes - property - Hardware ID, Value says:

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Hello:

  Here is the link for the driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-86003-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5094637 & sw_lang =

• NVIDIA nForce Networking Controller problem.

  In my "Device Manager" and on the tab "Network adapters", my NVIDIA nForce Networking Controller has a /! ------beside him.

  Here is what it says under "device status". "This device cannot start. (Code 10)

  I tried the 'check for solutions', but came up with nothing.

  In addition, it said that the most recent driver is installed.

  I don't know when it happened, but it's making my EQII. =(

  ____________________________________________________________________________________________________

  Computer: HP Pavilion DV9700

  OS: Windows Vista Home Premium / SP2

  System type: x 64

  Hello:

  The only suggestion I can offer is to reinstall the nForce chipset driver that also installs the cable network controller driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3650968&sw_lang=

• Windows 7 network controller problem

  Hi guys:

  I have Windows 7 HP Home Premium. I have re-installed just now. Now I've lost

  my ability to network controller. I'm now working on a stick.

  You name it, I tried it (for solutions) up to and including the programs 'stand alone '.

  I read today where the difficulty is from stubborn Microsoft

  When it comes to things like the update of drivers and updates period, when it comes

  for any other OS than 10, so I ask... is there a net controller that I can d/l who

  will it work on W7? Thank you, Carl

  Hello Carl,

  According to your description, I understand that you have faced problems installing your network controller after you have reinstalled Windows 7 Home premium.

  Microsoft provides surely as readers for the most commonly used device drivers which get installed automatically based on the requirements for your computer. Also, make sure that you check the optional updates too, that your network driver could have been which are listed there.

  If you get no device drivers in your windows updates. I would contact the manufacturer of your computer and get the latest drivers for your Windows 7 computer. Your computer manufacturer is one who is responsible for and must provide the drivers for your computer as they understand your computer better in terms of hardware.

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

  Thanks and greetings
  Sarandeep S - Microsoft technical support.

• HP pavilion dv6 6119so: network controller problem after reinstalling need drivers

  I need driver for network controller

  IDs PCI/VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
  PCI/VEN_14E4 & DEV_4727 & SUBSYS_145C103
  PCI/VEN_14E4 & DEV_4727 & CC_028000
  PCI/VEN_14E4 & DEV_4727 & CC_0280

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_114932_1&swEnvOid=4061

• Fresh install on SSD (image blurryor very fragile) problem?

  Hello

  so I have a new SSD and a new system installs on windows 7 pro 64-bit.

  Let me make a new project and a video as usual (before I get my SSD drive), and if I push the play button I get a very "fragile" image (see photo, very difficult to explain... and search the forum)

  If I resume and advance frame by frame (with the arrow) the image is 'fragile' (left side of image) then get normal after a second (right-hand side of the photo) perhaps.

  

  Note: It is two different screenshot as a before / after.

  Test I've done, it can help?

  I have the new project, and then restart my computer with my old system = > same problem

  Then I create a new project (called 2) on the old system and add the video = > no problem

  Then restart on the new system and open a project 2 = > same problem

  If I open the video with VLC = > no problem

  I have Premiere pro resinstall.

  (When I installed first of all, I get a problem with quicktime that make one very very long opening of the Prime Minister, so I reinstalled quicktime also)

  Thanks for reading and if you could help .

  My system is:

  Core i7 920

  12 GB OF RAM

  ASUS P6T

  NVIDIA GTX275

  OCZ Vertex 2 as disk system (and first car)

  1 TB drive HARD 7200 RPM for drive project

  WD velociraptor for cache drive. (old system disk, still in progress)

  
  

  Software:

  First pro CS5

  QuickTime 7.6.9

  Windows 7 pro 64-bit

  My camera is a Sanyo Xacti HD1010, taken from view at 720 p 30 fps.

  Info Media gives this:

  Format profile: Base Media / Version 2
  Identifier of the codec: mp42
  File size: 469 Mio
  Duration: 7 min 10 s
  Overall average: 9 145 Kbps
  Name of the movie/Plus: SANYO HD1010 DIGITAL camera
  Encoding date: UTC 2010-12-29 16:30:28
  Marking date: UTC 2010-12-29 16:30:28
  Origin: Digital camera
  TAGS: O DIGITAL CAMERA

  Video
  ID                                       : 1
  Format: AVC
  Format/Info: Advanced Video Codec
  Format profile: [email protected]
  Parameters of the format, CABAC: no
  Parameters of the format, Reframes: 2 images
  Identifier of the codec: avc1
  Identifier of the codec/Info: Advanced Video Coding
  Durée                                           : 7mn 10s
  Type of rate: Variable
  Flow: 9 009 Kbps
  Width: 1 280 pixels
  Height: 720 pixels
  Screen format: 16: 9
  Frame type: Constant
  Second normal images: 29 970 FPS
  Color space: YUV
  The chrom subsampling: 4:2:0
  Color depth: 8 bit
  Image type: progressive
  /(pixel*image) bits: 0,326
  Stream size: 462 million (99%)
  Language: English
  Encoding date: UTC 2010-12-29 16:30:28
  Marking date: UTC 2010-12-29 16:30:28

  Try changing your resolution of reading at full resolution, so that your CPU does not get bogged down scaling of the resolution.

• Satellite C660d - 14G: network controller is not installed

  Hello.

  I installed windows 7 on my toshiba.

  I have the problem with the wireless driver.

  I downloaded all the drivers availible on the website, but there is no change.

  In Device Manager writing the network controller is not installed.

  Hello

  > network controller is not installed.

  Network controller could be card Lan or Wlan.
  Are you sure that you need to install the Wlan driver?

  As far as I know the laptop was equipped with the 802.11bgn card Atheros AR9285 Wlan.
  The LAN card is 10/100 Base-TX Realtek 8105E-GR

  By the way: the latest Wlan drivers can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• PCI devices and network controller

  Can Hi anyone say about hoe to install PCI device driver and network controller Please that these two devices is marked with a? in the windows device drivers
  Thank you

  Hello

  If you have a problem, it will be very useful if you can write us which model of laptop you have.

  Please check the download from Toshiba site. You will find all the drivers that must be installed. If the unit is not old, you will find an installation manual and order of the facilities. If you are not able to identify hardware, please write again.

  Good bye

• Network controller and PCI simple communication controller does not

  I have a hp laptop with windows 7 ultimate 630. I tried to install new drivers for the network controller and controller of communication simple PCI but when I do I get a message that the driver has not been installed successfully. I know that I have the correct drivers to install but in Device Manager, I always get the yellow "!" next to them. How can I fix it?

  At any time.

  You are quite a nuisance.

  Here is the link for the driver you need for the player card.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5086783&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_93202_1%257CswEnvOID%253D4061%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Inspiron 1525 Network Controller driver

  My wireless does not work yet. I'm assuming its because the network controller is not installed.

  Anyone know how to install the network driver for Inspiron 1525 Contoller?

  (1) new hard drive

  (2) installed OS's Factory CD

  (3) I followed the order appropriate for the installation of the driver

  (4) I tried the drivers using my Service tag and not the label service (he installed Ethernet but not the network controller)

  (5) I don't see any info information or manufacturer in the sysinfo model, or properties of the control panel

  Only way to possibly identify the card wireless card itself and which is boiled no help either:

  MO: 42015902-04 Rev A03 DW1395CN-OJR356-13740-8B3-00WV-A03
  

  Any suggestions?

  SUCCESSFUL OPERATION:

  I installed these drivers in this order:

  Relocation of Dell DVD, Windows Vista Home Basic 32-BIT SP1

  Windows Vista 32-BIT SP2

  R259999 Dell System Software (DSS)

  R166188. EXE Ricoh chipset

  Intel R166187.exe chipset

  R218148.exe Audio

  R180254. EXE video

  R174292.exe Vista wireless driver (network controller)

  R167854. EXE Ethernet controller

  R286709.exe Touchpad

  Quick adjustment R180762.exe

  R150152.exe Modem

  R147130. EXE Modem Diagnostics

  Just need to applications and security.

  Thanks for being there!

  Most Grateful to natakuc4! your list of drivers and find out the name of the WIRELESS card and then find the Vista driver for it.

  I'm not sure why I had all the trouble, but I think the installation of SP2 or installing the driver before the driver Ethernet Wireless had fixed it.

• Network controller, SM Bus controller problems + bluetooth problems

  Hi, I just bought a new laptop from HP 2000-2d03SQ and a D-link router. I installed the router on the old pc I wanted to ditch the laptop wifi internet access. and that's where my problem begins... I managed to install most of the drivers, network controller and SM Bus controller show signs of yellow exclamation next to them in the Device Manager... tried to update with the windows updates, but nothing good happens, it says that it can find the drivers.

  Regarding the bluetooth.

  You are the very welcome.

  Let's try another...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_123851_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If this does not work, please let...

  Go to Device Manager.

  You will see a labeled device network controller and it will be a little! mark next to him.

  It is the wireless card that needs a driver.

  Click the network controller device. At the top of the network controller window, click the Details tab.

  Now, you see a Description of the list system default list drop-down property.

  Drop down on it and select the second element (Hardware ID).

  Now, you see 3-4 lines of characters, the upper line starting with PCI\VEN.

  After this first line of characters.

• New installation XP ThinkPad R61 - looking for Driver for network controller

  Hello

  My R61 came with Suse Linux and I have re-drive using a new version of XP. All software and drivers are installed but I stil have an exclamation mark in the Device Manager on the network controller. No matter what I do, I have re - install, drivers or when I search for an updated driver can't do the device to recognize a valid driver.

  Any ideas or is this a defect on the laptop?

  Usually when you install a device driver, the network controller is wireless network card.

  The Ethernet device is generally presented as Ethernet controller.

  Looking at your specs

  T8300(2.4GHz), 1 GB RAM, 160 GB 5400 RPM HD, 14.1 in. LCD 1440 x 900, 128 MB nVIDIA Quadro NVS 140 M, CD-RW/DVD-RW, Intel 802.11abg wireless, Bluetooth, Modem, 1 Gb Ethernet, UltraNav, chip secure, RPF, 6 c Li-ion, SUSE Linux Enterprise Desktop 10 SP1

  It seems that you have an intel WLAN card which should be here.

  Be sure to post the results. :-)

  If it doesn't not reolve trying to get a screenshot of the Device Manager, if you could.

• HP envy 700-414: HP Envy 700-414 Windows 7 driver network controller says I don't meet the minimum requirements

  I recently installed Windows 7 on my hp envy 700-414 and missing a lot of pilots. A user by the name of banhiem gave me a link to download the drivers of a 700-230 hp envy. After I did it, I clicked on another link, it gave me to install the Realtek network controller. Whenever I tried to install the driver, it would tell me that I did not meet the requirements. Other drivers work fine now, except the network controller. The steps on how to fix this error would be greatly appreciated.

  Hello:

  See if this card wireless driver works...

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated in the supported models that run an operating system supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70888.exe

• Envy - adapters network missing after Windows 7 install

  Hello

  I did a full install of Win7 for HP dv4t Envy.  I installed the network drivers 4 listed on the support page of Win7, but I see some questions in Device Manager prevents access to the network.

  Model: HP dv4t Envy

  Win7 Pro 64-bit

  Features and albums hw id, containing the warning message:

  -(PCI\VEN_10EC & DEV_8168 & SUBSYS_1837103C & REV_06) Ethernet controller

  -Network controller (PCI VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4)
  -Controller Communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_1837103C & REV04)
  -(PCI VEN_8086 & DEV_1E22 & SUBSYS_1837103C & REV04) SM Bus controller
  -Controller Universal Serial (USB) (PCI VEN_8086 & DEV_1E31 & SUBSYS_1837103C & REV04)
  -Unknown Device (ACPI\HPQ004)
  -Standard VGA Graphics adapt (PCI\VEN_10DE & DEV_0DE9 & SUBSYS_1837103C & REV_A1)

  Appreicate any help to find the correct drivers.  Let me know if you need more information to correctly identify the drivers. Thank you!

  Intel chipset driver utility that I have provided the link should tell you what chipset is installed and recommends downloading the correct driver.

  Did you install the Intel network adapter driver? Use utilities at Intel to help you identify the required driver.

  Since you now have working usb ports, you can use a dongle to usb as a temoporary wireless network.