Envy - adapters network missing after Windows 7 install

Similar Questions

• I need help, I have tried everything! Network controller after you have installed windows 7 on a windows 8.1 machine!

  Hi all!

  I have a Dell Inspiron 3521. It was 8.1 on Windows and I installed Windows 7 Pro OEM 64 bit. I delete the old file of windows. I was able to install all the drivers from Dell Web site, but I can't seem to find a way to get the right driver for the "network controller". I have tried driver identifier and it shows me two missing drivers: 1: BCM43142A0, 2: network controller.

  This is the ID of the MDO of material:

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_00161028 & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_00161028
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  I found a post with someone who has the same keys, but the driver in the link did not help me. Maybe it's the way I installed the drivers? Or how I installed windows 7?

  Help, please!

  The last Reference Dell driver for the Dell Wireless 1704 map is 6.30.223.228. You can also try the later card Dell Wireless 1708 6.30.223.245 (both are adapted Broadcom drivers) first directly and then in Device Manager.

• wireless adapter network missing after reinstalling windows

  I am a newbie.i I reinstall my Presario CQ57 window 7 Home Premiun 32 bit and since these drivers are missing.please someone help me.

  Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3672103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3672103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  PCI Simple Communication controller

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  SM BUS controller

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3672103C & REV_04

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_3672103C

  PCI\VEN_8086 & DEV_1C22 & CC_0C0500

  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Try:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1&cc=us&DLC=en&LC=en&OS=4063&product=5173039&sw_lang=

  Concerning

• Driver missing for 'Base system device' x 2 after Windows 7 install on laptop

  Hello

  I have two drivers 'base system device' missing on my laptop. Previously, I had Vista Home premium installed. Ive now formatted the HARD drive and installed 7 Home premium.

  My notebook is a laptop ' HP Pavilion Thrive dv6822tx special edition Entertainment. " Details on the two points are the following:

  1 location: Bus PCI 7, device 9, function 2

  Hardware ID:

  Hello

  Install:

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  Also check this thread:
  Windows7 upgrade for dv6000/dv9000 models Guide

• ProBook 6550 b: driver missing for 'Base system device' x 2 after Windows 7 install on laptop

  Upgrade to SSD drive and a fresh install of Windows Professional 64 bit, I've got two conflicts in referring to the 'base system device' Device Manager Both devices are PCI Slot 2 (PCI bus 67 0 device function 1)

  Both devices enter the following code in the information system:

  PCI/VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01/4 & 7ECE869 & 0 & 02E2

  I read through the 16 pages of other people having similar problems, but not the same code. I installed the Ricoh 5-in-1 reader for software 64-bit without success.  Any help will be greatly appreciated

  Here is the link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

• Driver missing for 'Base system device' x 2 after Windows 7 install

  
  

  Hello

  Download and install the driver of player card on the link below.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-92295-1

  Once the installation is complete, restart the computer and check the Device Manager.

  Kind regards

  DP - K

• New R13 - R7 - 372T: Tools missing after the clean install

  Hello!

  I got my R13 - R7 - 372T today and I want to do a clean install of Windows 10. I checked the Acer site and saw that most of the drivers are available on the download page, I also found the abApps (Portal of Acer and) download ( https://www.cloud.acer.com/ops/downloads) where I need those who one day but its seems that some of the pre-installed tools/applications are missing. How can I reinstall the following tools if I wipe my device? (I have already created a backup of the recovery partition but I need regular installation files):

  -Acer care center (edit: I found a link for verification of compatibility to download it here: http://www.acer.com/ac/en/MY/content/software-acer-care-center )

  -Acer Hover access (edit: found the link for flight stationary access here: http://go.acer.com/?id=18022#_ga=1.267060686.114307318.1458377954 but not sure of the version)

  -Dolby X 2 Audio Windows App

  -Acer Audio utility invert (makes that actually do?)

  I'm a little disappointed that Acer does not offer those by convenient download as the rest of the drivers and application of quick access for example. So where can I download those, or how I at least check out them of the recovery media that I created?

  Edit: Looks like after some experiences of most of the tools I mentioned is unnecessary (so I removed them from the list) or available by searching around for a while. However the 2 above mentioned utilities are still missing.

  Thank you!

  Alex

  Dolby

  Go to Manager of device/Audio inputs and outputs / RealTek High Definition Audio speakers / right click and uninstall.

  Go to C:/drivers/setup and install. Otherwise it

  Audio

  Realtek

  Audio driver

  6.0.1.7288

  386,0 MB

  04/11/2014

  Download

  Don't restart yet.

  Go to PCEE4/Dolby Home Theater / double click and install/reboot.

  Audio Acer utility to invert

  I don't know what it is. Nobody seems to know.

• Can not activate wireless after Windows vista install driver problem?

  Hi all

  Don't know if this is the right place for the post, if not I apologize in advance.

  I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I have brought a new and installed Windows Vista disc premium edition (not a backup / recovery disc).

  Everything seems fine but I can't turn on the wireless, the C700 has a button at the top wireless rough (which has a red LED when not away) to the left side. Normally impose you it, and it lights up (turns blue LED) but nothing!

  I have commented on Wi-wired and update windows etc and have tired to find wireless driver I guess that I'm missing? You are not sure if it's wireless missing driver or a keyboard driver?

  After installing a few drivers I found where time no joy!

  Can anyone help?

  See you soon

  P

  You are the very welcome.

  This driver below should set you straight up.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Best regards

  Paul

• Bluetooth, disappeared after Windows 7 install (T500)

  I just installed Windows 7 on my T500 and after installing almost all Lenovo Windows 7 drivers and software, I stumbled upon a roadblock with the Bluetooth software. When I run it, it tells me that I don't have bluetooth on my laptop (I do).

  I run the v4.0.1.100.1124 file that I downloaded from the Lenovo site. He says it's for Windows 7. When you run it, it says it's installing '6.2.0.9600' so-called 'Thinkpad Bluetooth and enhanced data rate software '. It starts then stops by saying that I have no Bluetooth device.

  I don't know if it's related, but my device manager says I'm missing "PCI Serial Port" and "PCI controller of Communications Simple." I don't know if that is related.

  Can someone help me find my bluetooth?

  Thank you!!!

  * SOLVED *.

  I solved my problem. It's stupid, but I am posting here in case someone else gets through all the transitions in Windows 7 and ends up stuck on this one.

  You need to manually activate the Bluetooth adapter with Fn-5 first. Then you can install the Lenovo Bluetooth driver.

  

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• G7 2233 pilots missing after windows 7 ultimate 64-bit new installation

  Hi - I received the computer modeled above with 8 pre-installed windows. I installed a clean install (wiped readers) and installed the operating system Windows 7 Ultimate 64-bit. When I did, none of the internet connections would even work. I since found (somehow) a pilot who was consistent, which deals with the missing wifi adapter, but I still need the following items:

  Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_184B103C & REV_05

  PCI device: PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01

  UNKNOWN DEVICE: ACPI\HPQ004

  I can't find these anywhere, PLEASE help.

  When you request support, please provide the HP model name and/or product the full number of the computer in question.

  Assuming that you have a HP Pavilion laptop g7-2233 cl, specifications, other than the CPU, the RAM and the size of the screen, seem to be the same as my sister-brother g6-2210us laptop HP Pavilion computer. Drivers 64-bit of Windows 8 listed for two computers are the same. I installed Windows 7 64 bit on his computer about a month ago and used the following drivers of multiple origins;

  Drivers for Chipset AMD (Chipset, USB 3.0, SATA/RAID)

  AMD Catalyst Display Driver

  Realtek FE family LAN Driver 

  Card reader driver Realtek PCIe RTS5229 

  HP sp54972 Atheros 5xxx/9xxx WLAN Driver

  HP IDT HD Audio Driver sp59620

  HP sp58539 touchpad driver Synaptics PS2

  HP CoolSense sp60051

  and from Windows Update "HP Mobile Data Protection Sensor.

  It is possible that the WLAN chipset on your machine is different and may require different drivers.

  I've also updated updated the Synaptics driver to v16.2.21 on Synaptics site. Some of the factors above may require the HP sp59202 software framework. In addition, the WebCam requires the package of "VideoCM" of the "SWsetup" folder in the original installation of Windows 8 and CyberLink YouCam sp59986.

  When you are finished, there is no unknown device on its system.

  Please send Bravo

• Not able to install switchable graphics after windows 7 installed on HP Pavilion G4 cost

  I replaced the HDD with SSD and windows 7 ultimate (X 64) installed on my laptop HP Pavilion G4. However, I am not able to install on my laptop switchable graphics now.

  I tried this

  1 installed HPSA and run the update and tuneup. He asked me to update ' AMD high definition Graphics Driver "but it failed with several attempts and after awhile now he doesn't want to do this update at all. Now everything is green in HPSA but I'm still not able to switch graphics

  2 tried to download drivers HP page, but it says 'AMD Catalyst Mobility cannot be downloaded because of incompatible hardware/software on your computer.

  3 tried to uninstall the driver but windows update drivers automatically.

  4. I've also updated suggested such BIOS http://support.hp.com/us-en/document/c02948560 but still no luck

  I don't really know what I can do here. There are some similar queries in the forum but they seems to be for different models.

  Can someone please?

  Product name: HP Pavilion Notebook PC g4

  Operating system: Windows 7 Ultimate 64-bit Service Pack 1

  Product number: LQ375PA #AB4

  Country: Singapore

  Well, I managed to finally install.

  That's what I did

  1 looked up the number of my product in the drivers

  2. Recovery Manager installation

  3. AMD graphics card driver Version8.810.4.5000. (I tried earlier but did not work this time)

  I tried two things earlier, but not sure about the sequence... No doubt this time I tried both of them after the BIOS update.

• User profile missing after Windows Update, 15/08/2011

  The or about August 15, 2011, I installed the latest Windows updates on my Vista computer.  Upon restart, missing my boot of Mike and say not found user profile.  Me connected under my name, but to a temporary profile - programs are still there, but any user names and passwords are gone.  Help, please!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try running this fixit and see if it helps:

  http://support.Microsoft.com/kb/947215

  Method 2:

  Start the computer to recovery options and try to perform the system restore and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Recovery HP Envy 4 Ultrabook (Sleekbook) after Windows 8.1 update course

  I'm working on a model of ultrabook (sleekbook) of HP Envy 4 4-1115dx for a friend. They said they tried to upgrade to Windows Update 8.1 and it has not worked since. There was a black screen with an error that says "boot device not found" hard drive (3F0). I tried everything I can find on the internet to try to address this. I ran Diagnostics of hard disk (short and long), and the order is placed. I have reset the BIOS settings by default, Secure Boot disabled, enabled Legacy Boot and I have somehow or another managed to access a screen that shows the RAID settings and I put the hard drive in non-RAID (probably an error). During all of this, I ordered a USB hp recovery and when it starts I get a warning that says "not recovery support to the title of the current configuration, please activate the acceleration for Intel Smart Response Technology option and try again." I can't find this in the BIOS anywhere (turning power of boot technology fast Intel does nothing.) Through what seems to be something that you configure in Windows leading to the top of this post. I tried all these parameters before and after changing the RAID settings. So now I have a recovery USB which does not seem to work on this work and the drive tests very well. I could shoot the SSD drive, if necessary, but I was trying to avoid that, because you have to take the whole computer part to access. Any suggestions?

  Well, I feel like a fool. I was misunderstanding the SSD as drive JUST before I realized it was both. The normal hard drive was dead. I put a new hard drive in it after removing the bottom of the laptop and the provided HP recovery USB what worked perfectly. I kept thinking there was a partition on the SSD that I didn't see or format. It was just a plain ole doesn't have a hard drive. Thank you very much for your help.

  dk1

• tbssvc.dll missing after Windows Update

  Hello

  Everyone has noticed that the tbssvc.dll file is deleted after execution of the April "convenience update" of Microsoft?  I have a Windows 7 SP1 x 64 iso and if I run the update of convenience or 200 updates + Windows updates, this file disappears and I have no service TPM Base Services.  Tbs.dll file is there, but has a date of 2016 instead of 2009.

  I tried to copy it over from another machine, replace the necessary registry keys for the service and that brings back the service but breaks the Bitlocker feature.  Someone knows how to restore this file, service and have still Bitlocker works or know what Windows Update is causing the file to be deleted?

  We found the offending update. Delete KB3133977 restores the TBS service. KB information, it looks like that this update replaces most of the TPM platform. The only missing is visibly tbssvc.dll. I wonder if it is a flaw in the update iteself. The update is listed as important (recommended) and is supposed to instability address in the application of Bitlocker. Not much choice here: instability or a complete failure. Can Microsoft fix this?