FRM-30085: unable to adapt to the shape for the release.

Hi all

When executing the form to get the following error.

FRM-30085: unable to adapt to the shape for the release.

How to adjust the form to exit please help me thanks in advance.

Sarah

If you try to open a previously saved forms 10.1 form forms 9.0.4
you get this error without any additional message if you try to compile forms 9.0.4.

Tags: Oracle Development

Similar Questions

FRM-30085: unable to adapt to the form to exit
http://www.Flickr.com/photos/50794756@N06/

Please visit this link I post... .and give me sollution...
Double click on the navigator object block and assign ownership precalculate summaries No. and together to query all records to YES

I am unable to adapt both the screen saver is activated

I am unable to adapt both the screen saver is activated, I put the link, but it acts as if it was before progrmmed?

Also is there a way to avoid to connect every time?

The problem with these parameters is that they overlap. The screen saver setting is perhaps not the one place to look: you should also watch your 'screen time out", as well as waiting times"lock screen ". In addition, it could be the energy saving sleep timer. From the point of view of the user, they all look the same (the screen turns off), but to get the desired exact situation, you may need to check up to 4 places.
1. Right-click on the desktop > personalize > screen saver
  Even if you do not use a screensaver, this timer value is used to lock the screen. The value 'none' and make sure that the check box is disabled, it does not require a password.
2. Power options > Change when turn off the display
  Also look at the "require a password on wakeup" option here
3. Power options > change when the computer sleeps
  Also look at the "require a password on wakeup" option here
4. Application settings > lock screen settings

FRM-92050: unable to connect to the server/FORMS/FORMSERVLET:-1
Hello

We have Oracle EBS R12 Production site as follows:

2-node Oracle RAC 10 g 2
2-node Application Tier using shared APPL_TOP
H/W load balancer
The AD/OID/SSO integration

We configure DR using Oracle Data Guard as follows on the DR Site:
2-node Oracle RAC 10 g 2
2-node Application Tier using shared APPL_TOP
Load balancer of S/W using the Web cache
The AD/OID/SSO integration

During the failover test env DR, when we start the 2nd layer of Apps services, we get "FRM-92050: unable to connect to the server/FORMS/FORMSERVLET:-1.
When we stop the applications Tier 2 services forms work correctly.

When we start a single node of level Apps, forms work correctly.

Want to know how to solve this problem.

Kind regards
Thiru
PL confirm that persistence (rigidity) has been implemented on the loadbalancer webcache

Installation and configuration of Web Cache 10 g and Oracle eBusiness Suite 12 [380486.1 ID]
11i: ' FRM-92050: unable to connect to the server/FORMS/FORMSERVLET:-1 "error when using load balancer [420021.1 ID]

HTH
Srini

FRM-41213 unable to connect to the report server
Dear all, I use Forms10g and reports 10g.
I call my form report, show this error:

FRM-41213 unable to connect to the report server

It's my code. What's not here?

DECLARE
Repid REPORT_OBJECT;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (20);
plid ParamList;
number of vParamValue;
BEGIN
plid: = Get_parameter_List ('tmp');
IF this is Id_Null (plid) THEN
Destroy_parameter_List (plid);
END IF;
plid: = Create_parameter_List ('tmp');
Add_Parameter (PLid, 'P_Block', Text_Parameter,: block_query.item_block);
Add_Parameter (PLid, 'P_Category', Text_Parameter,: block_query.item_category);
Add_Parameter (PLid, 'P_Dept', Text_Parameter,: block_query.item_dept);
Add_Parameter (PLid, 'P_FLOOR', Text_Parameter,: block_query.item_floor);
Add_Parameter (PLid, 'P_IP', Text_Parameter,: block_query.item_ip);
Add_Parameter (PLid, 'P_Room', Text_Parameter,: block_query.item_room);
Add_Parameter (PLid, 'P_Userid', Text_Parameter,: block_query.item_usr_id);
Add_Parameter (PLid, 'PARAMFORM', Text_Parameter, "NO");

Rep: = FIND_REPORT_OBJECT ('rp_test1');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);

SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'PDF');

SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, "paramform = no");

SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'rep_oracleapps_eHOpeAS');

v_rep: = RUN_REPORT_OBJECT (repid, plid);
rep_status: = REPORT_OBJECT_STATUS (v_rep);

While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
LOOP
rep_status: = report_object_status (v_rep);
END LOOP;
WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?)
('| 'server = rep_oracleapps_eHOpeAS');
Exception
While others then
message(SQLERRM||) e -'|| SQLCODE);

End;
Hello

Please start you are first report server and then try to view report.try something like this to start the report server.
```
rwserver server=server_name start
```
Note:-you need to start the report server using cmd (Dos) Pormpt.soemthing like this.
```
c:\form_home\bin\rwserver server=server_name start
```
Sarah

Unable to adapt to the playback speed in Windows Media Player

Windows media player

Problem: Cannot use game fast speed

When I change the game of fast speed by watching a video the sound cuts. (Windows Media Player)

Maybe that's a problem with my sound card driver?

Hi Katchafire,

1. What is the format of the video file you are playing?

2 are you facing the problem with the single video or videos?

Usually, when you try to play the video fast, the sound stops.

For more information, you can consult the following article:

Play an audio or video file: frequently asked questions

Hope this information is useful.

Lightroom 4.4 out of 10 to win: UI too small, impossible to read. Unable to adapt in the preferences. [was: Jim]

I have Lightroom 4.4 with a pc using Windows 10. Windows and is so small, it is impossible to read. I tried to change in preferences with no luck. Any ideas what I can do. Thank you.

LR 6 / 2015 CC provides options to define the font size up to 250% higher than normal under Windows. But you have to pay for the upgrade.

No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

Hello

Know what type of network card you have and download the drivers of its supplier.

It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

Jack-MVP Windows Networking. WWW.EZLAN.NET

Error message: FRM-1808: unable to load the following items

Hi gurus
I copied the forms of my server on my local machine and got the following message when I try to open this form:
Message
FRM-1808: unable to load the following items.
Source Module: test_property_class.fmb
Source object: J_OBJ_GRP
After that, I see another message to fix some PL/SQL libraries, now I have a plan to fix the missing library, but I don't know how to get rid of the message above...
Appreciate your help. Thanks in advance.
Concerning
Muzz

Forms is unable to find your form tamplate and your PLL.

Check FORMS_PATH (in the registry) and add the appropriate paths where to find them.

FRm-40741: unable to locate the plug on block 11
Hi all

I use this custom property defined when press the button Search "FRm-40741: unable to locate the plug on block 11" error getting.

If: XXEAM_SHUTDOWN_DETAILS. WF_STATUS = "Not sent yet!" then
Set_Custom_Property('XXEAM_SHUTDOWN_DETAILS.) WORK_ORDER_NO',: SYSTEM. TRIGGER_RECORD, "ENABLED", TRUE);
Set_Custom_Property('XXEAM_SHUTDOWN_DETAILS.) ESTIMATED_START_DATE',: SYSTEM. TRIGGER_RECORD, "ENABLED", TRUE);
end if;

Please give me any other property for record wise work instead of Set_Custom_Property.

Kind regards
Maha
Finally, I had a few minutes to play with my sample form and found out that Andreas is correct when he said:

SET_CUSTOM_PROPERTY does not have the number of the logical record as a parameter, but 'the physical line number' in the layout.

In my example of form, as I scrolled items folders "Enabled" has not changed with the records.

*@Maha,* my apologies. In order to apply the desired effect, you will have to imitate the enabled property for each record by using a combination of the Set_Item_Instance_Property() WATERWAY integrated, INSERT_ALLOWED, UPDATE_ALLOWED and VISUAL_ATTRIBUTE (optional) properties. Because you change many properties, I so wrap it in a procedure called ENABLE_ITEM and past the point, the file number and activate settings. For example:
```
/* This procedure assumes you have a VISUAL_ATTRIBUTE                 */
/* created called 'ENABLED' and 'DISABLED'.  In my example,           */
/* I created the DISABLED visual attribute with following properties: */
/*  Foreground Color = DarkGray                                       */
/*  Background Color = gray12                                         */
/* The ENABLED visual attribute does not specify any properties so it */
/* sets the above properties back to                     */
PROCEDURE enable_item (inItem VARCHAR2, inRecord NUMBER, inEnabled BOOLEAN )IS
     paramCount     NUMBER := 0;
BEGIN
     IF ( inEnabled ) THEN
          Set_Item_Instance_Property(inItem, inRecord, INSERT_ALLOWED, PROPERTY_TRUE);
          Set_Item_Instance_Property(inItem, inRecord, UPDATE_ALLOWED, PROPERTY_TRUE);
          Set_Item_Instance_Property(inItem, inRecord, NAVIGABLE, PROPERTY_TRUE);
          Set_Item_Instance_Property(inItem, inRecord, VISUAL_ATTRIBUTE, 'ENABLED');
     ELSE
           Set_Item_Instance_Property(inItem, inRecord, INSERT_ALLOWED, PROPERTY_FALSE);
          Set_Item_Instance_Property(inItem, inRecord, UPDATE_ALLOWED, PROPERTY_FALSE);
          Set_Item_Instance_Property(inItem, inRecord, NAVIGABLE, PROPERTY_FALSE);
          Set_Item_Instance_Property(inItem, inRecord, VISUAL_ATTRIBUTE, 'DISABLED');
  END IF;
END enable_item;
```
You then call the ENABLE_ITEM procedure in your code, passing the name, registration number and activate (true or false) disable your element. For example:
```
If :XXEAM_SHUTDOWN_DETAILS.WF_STATUS = 'Not Submited Yet!' then
   enable_item('XXEAM_SHUTDOWN_DETAILS.WORK_ORDER_NO', :SYSTEM.TRIGGER_RECORD, TRUE);
   enable_item('XXEAM_SHUTDOWN_DETAILS.ESTIMATED_START_DATE',:SYSTEM.TRIGGER_RECORD, TRUE);
end if;
```
Options François and Steve mentioned are also good ways to do this as well.

Sorry if I confused the issue earlier.

For those who suggested to use SET_ITEM_PROPERTY('BLOCK_NAME.) Nom_element', ACTIVE, PROPERTY_FALSE), do not forget the cascade effect of assigning false to the ENABLED property of an element. When you ACTIVATE your story later, you must also set the properties MODIFIABLES NAVIGABLE, UPDATE_NULL, true.

Craig...

Published by: Silvere on 16 January 2013 14:15

FRM-30312: unable to compile the library in R12
Hi all

I want to compile a library of custom in R12. After that I have compiled, a strange error has occurred... Some packages are not available. So I decided to compile a standard library (JE.pll) and the error occurred again. If I wrote $FORMS60_PATH echo nothing appeared. I have to add the path that contains the libraries?

This is the command I executed
---------------------------------------------------

frmcmp_batch ${1} .pll userid = module_type output_file=/u01/oracle/DESA/apps/apps_st/appl/xbol/12.0.0/resource/${1}.plx APPS/APPS = LIBRARY

This is the error:
-----------------------

10.1 forms (form of the compiler) Version 10.1.2.3.0 (Production)

10.1 forms (form compiler): Release-Production

Copyright (c) 1982, 2005, Oracle. All rights reserved.

Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
PL/SQL Version 10.1.0.5.0 (Production)
Oracle V10.1.2.3.0 - Production procedure generator
Oracle 10.1.2.0.0 graphic virtual system Version (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle tools integration Version 10.1.2.0.2 (Production)
Common tools Oracle area Version 10.1.2.0.2
Oracle CORE Production 10.1.0.5.0
Compile the library I...
Compile the package Spec JEZZ_GL...
Compile the package Spec JEZZ_AR...
Compile the package Spec JEZZ_AP...
Compile the package Spec JEZZ...
Compile the package Spec JESK_AP...
Compile the package Spec JERU_SH...
Compile the package Spec JERU_GL...
Compile the package Spec JERU_CE...
Compile the package Spec JERU_AR...
Compile the package Spec JERU_AP...
Compile the package Spec JEPT_AR...
Compile the package Spec JEPL_AR...
Compile the package Spec JEIT_AP...
Compile the package Spec JEHU_AP...
Compile the package Spec JEES_AR...
Compile the package Spec JEES_AP...
Compile the package Spec JECZ_AP...
Compile the package Spec I...
Compilation of the Package JEZZ_GL body...
Compilation of the Package JEZZ_AR body...
Compilation of the Package JEZZ_AP body...
The body of Package JEZZ compiling...
Compilation of the Package JESK_AP body...
Compilation of the Package JERU_SH body...
Compilation of the Package JERU_GL body...
Compilation of the Package JERU_CE body...
Compilation of the Package JERU_AR body...
Compilation of the Package JERU_AP body...
Compilation of the Package JEPT_AR body...
Compilation of the Package JEPL_AR body...
Compilation of the Package JEIT_AP body...
Compilation of the Package JEHU_AP body...
Compilation of the Package JEES_AR body...
Compilation of the Package JEES_AP body...
Compilation of the Package JECZ_AP body...
Compilation of the body of Package I...
FRM-30312: unable to compile the library.

Thanks Mariano. -.
Hello

What do you mean ¨instead¨? That it is not necessary to set the FORMS60_PATH?.

If you're on 11i, you must check the value of FORMS60_PATH

If you're on R12, you must check the value of FORMS_PATH

In addition, I sent an email to DBA in order to know if we have invalid objects, but I need to insist that the library is standard (JE.pll).

Just make sure you can get this error FRM if you have invalid objects that may apply.

Thank you
Hussein

Unable to connect to the database of the BPM 11g database adapter
I added an adapter of BPM 11 g database to the composite.xml. This database adapter is just to load data into an XML (in charge of the user interface) document. I can't get a connection to the database. I get an error message, see below.

< bpelFault > < faultType > 0 < / faultType > < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked. Exception occurred during invocation of the JCA binding: "JCA binding run operations reference 'GetRequestInfoSelect' have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). FundsDisbursementProject:GetRequestInfo [GetRequestInfo_ptt::GetRequestInfoSelect (GetRequestInfoSelect_inputParameters, FdRequestHeaderCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = "jndi/FDF_Database. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined on jndi/FDF_Database. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). If please fix this and then restart the application server". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < Summary / > < / part > < part name = "detail" > < details > error location JCA resource adapter. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = "jndi/FDF_Database. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined on jndi/FDF_Database. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then restart the application server < / details > < / part > < part name = "code" > < code > 12510 < / code > < / piece > < / bindingFault > < / bpelFault >

The docs said I need to add a Pool of outbound connections to SOA DbAdaptor in WebLogic. The problem is that I can't seem to make my changes take effect. It's the same mistake recorded here:
Adapter DB BPEL

The problem is when you try to change the property, xADataSourceName, that the changes take effect. I also note that, in our test environment, I get a dialog box to change the deployment plan. On my local WLS, I don't get this dialog box. Anyway xADataSourceName changes will not take effect.

There must be a simple solution, I do not.

Any help is greatly appreciated.
Kind regards
Mark

Published by: M Peterson on July 15, 2010 05:33
When you enter the xADataSourceName property, you hit enter the field? If you simply tab off the field and click on save changes without hitting the Enter key, then it does not record the change in ownership.

Error oracle FRM-40505 unable to execute the query
Hi gurus,

When query the values in host order of Super order management user

The following error is displayed:

FRM-40505: ORACLE error: cannot perform the query

What is the solution for this error?

Concerning

SBJ *.
Take a look at Metalink Note: "Troubleshooting FRM-40505 [ID 1004134.6].

Khan

Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

Original title: windows xp.

reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

Hello

Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

Get graphics, sound while you're there.

You should always do a reinstallation.

Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

See you soon.

Unable to connect to the internet, in vista h.p.. /.

Unable to connect to the net in vista h.p./tried reset cable motem [unplug and reconnect] / I tried to disable and re activate device Man. / Properties show peripheral works properly or not a cable/same question do you have a complete op sys. reinstall and tried previous tries again to EVERYTHING/IDEAS? The computer is an acer m1100 amd 64 x 2 4400 2.3 with a Maxwell Yukon pci - e Ethernet controller [using a wired connection]

Hello

That you get error messages when you tried to connect to the Internet?

You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:
- A wireless network adapter switch that is not enabled
- WEP, WPA, or WPA2 key or password security issues
- Cables that are not connected correctly
- Corrupt or incompatible drivers
- Missing updates
- Network connection settings
- Hardware or software problems
You can run the troubleshooter and update network cards.

Wireless and wired network problems

http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Also see these articles for more information and to perform the steps.

Network connection problems

http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

The problems of Internet connection

http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

Hope this information helps. Response with status so that we can help you.

FRM-30085: unable to adapt to the shape for the release.

Similar Questions

Maybe you are looking for