Unable to connect to the database of the BPM 11g database adapter

I added an adapter of BPM 11 g database to the composite.xml. This database adapter is just to load data into an XML (in charge of the user interface) document. I can't get a connection to the database. I get an error message, see below.


< bpelFault > < faultType > 0 < / faultType > < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked. Exception occurred during invocation of the JCA binding: "JCA binding run operations reference 'GetRequestInfoSelect' have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). FundsDisbursementProject:GetRequestInfo [GetRequestInfo_ptt::GetRequestInfoSelect (GetRequestInfoSelect_inputParameters, FdRequestHeaderCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = "jndi/FDF_Database. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined on jndi/FDF_Database. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). If please fix this and then restart the application server". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < Summary / > < / part > < part name = "detail" > < details > error location JCA resource adapter. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = "jndi/FDF_Database. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined on jndi/FDF_Database. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then restart the application server < / details > < / part > < part name = "code" > < code > 12510 < / code > < / piece > < / bindingFault > < / bpelFault >


The docs said I need to add a Pool of outbound connections to SOA DbAdaptor in WebLogic. The problem is that I can't seem to make my changes take effect. It's the same mistake recorded here:
Adapter DB BPEL

The problem is when you try to change the property, xADataSourceName, that the changes take effect. I also note that, in our test environment, I get a dialog box to change the deployment plan. On my local WLS, I don't get this dialog box. Anyway xADataSourceName changes will not take effect.

There must be a simple solution, I do not.

Any help is greatly appreciated.
Kind regards
Mark

Published by: M Peterson on July 15, 2010 05:33

When you enter the xADataSourceName property, you hit enter the field? If you simply tab off the field and click on save changes without hitting the Enter key, then it does not record the change in ownership.

Tags: Fusion Middleware

Similar Questions

  • Unable to connect to the network and network adapter is not detected

    Hello, this is the first time I use a laptop ( HP Pavilion 2332se g6 ) and I installed Windows 7 Ultimate 64 bit. I cannot connect to the network (wired or wireless) and cannot connect to Wi - Fi.

    My problem is perhaps the same problem in this post in your forum, so I provide the same information. If it's not the same problem, ask the details you need.

    What I see in device (with hardware ID) Manager:

    • Other features:

    Bluetooth controller:

    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C

    PCI\VEN_1814 & DEV_3298 & CC_0D1100

    PCI\VEN_1814 & DEV_3298 & CC_0D11

    Ethernet controller:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_O5

    PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_0200

    Network controller:

    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

    PCI\VEN_1814 & DEV_3290 & CC_028000

    PCI\VEN_1814 & DEV_3290 & CC_0280

    PCI device:

    PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

    PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C

    PCI\VEN_10EC & DEV_5229 & CC_FF0000

    PCI\VEN_10EC & DEV_5229 & CC_FF00

    PCI Simple Communication controller:

    PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

    PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C

    PCI\VEN_8086 & DEV_1E3A & CC_078000

    PCI\VEN_8086 & DEV_1E3A & CC_0780

    SM Bus controller:

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C

    PCI\VEN_8086 & DEV_1E22 & CC_0C0500

    PCI\VEN_8086 & DEV_1E22 & CC_0C05

    (USB) Universal Serial Bus controller:

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C

    PCI\VEN_8086 & DEV_1E31 & CC_0C0330

    PCI\VEN_8086 & DEV_1E31 & CC_0C03

    Unknown device:

    ACPI\HPQ0004

    * HPQ0004

    Hello:

    First install the chipset driver and reboot (will install the SM Bus controller).

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103010-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    Second: Install the AMD graphics driver and restart.

    For switchable graphics in your notebook, you install only the driver AMD, which installs the drivers for the AMD and Intel for the graphical configuration has your laptop. NEVER install the Intel driver only or allow updates to the Intel graphics driver to install.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-111285-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    Third: Install the audio driver and reboot.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104672-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    Now, the rest of the devices can be installed...

    Ethernet controller:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102604-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    Network controller

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_119873_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    Bluetooth controller

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113004_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    PCI device

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102497-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    PCI Simple Communication controller

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102566-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    (USB) Universal Serial Bus controller

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

    Unknown device

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  • Unable to connect to the internet, no network adapter icon?

    I received a computer toshiba satellite laptop which should have windows 7 ultimate on, however it does not connect to the internet wireless or ethernet, I lived all the troubleshooting suggestions, but there is no network adapter icon to activate. The laptop was of an elderly aunt who barely used and was not very tech savvy so I don't think that its been damaged (it has not been used for some time) any help would be greatly appreciated.

    Are there devices listed as "other"?

    If there is, run as 'Administrator' Device Manager and do a right click, properties, [pilot tab] and try to "roll back driver" (I guess the update driver will not work if the PC is not connected to the internet, but it can also be worth a try)

    If this does not work, try to force the hardware detection - http://www.pctips3000.com/how-to-scan-windows-7-computer-for-newly-attached-hardware/

    If still no joy, use another PC to go to the support site for the brand/model PC and download the latest driver available for your PC and the operating system network card (32/64 bit, etc.) and transfer it to the PC via a USB or SD card. Then try to install it.

    BIOS - how you access the BIOS will depend on the brand / model of the PC and the BIOS itself, but it gives an example: http://pcsupport.about.com/od/fixtheproblem/ht/accessbios.htm give it a read and see if you can follow. Ensure that you change and not change things randomly.

  • VAIO Messenger-unable to connect to the database

    I had this problem for months. When I connect to the internet... about 10-15 minutes later... a box opens "Vaio Messenger unable to connect to the database." I'd like to just turn off Vaio Messenger. I looked up how to disable Messenger but he always States go to the settings dialog box. For the life of me I can't find a dialog box. How can I disable Messenger? How do I repair Messenger so it CAN connect to the database? Help!

    I had this problem for months. I can't change the dialog box. I can't uninstall vaio Messenger. I have so much pain to find this site, if you have a cure please write me [email protected]

  • RCU error: unable to connect to the database using the contact information provided

    Hello

    I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

    rcu.PNG

    Concerning

    Oumaima

    Hi Handal

    Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

    Thank you

    Oumaima

  • Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

    Hello.

    Hello

    Do you have any idea of this error, I went through a few forums, but I still got the same message.

    FDM is my server on computer A

    and my Foundation + shared on machine B


    Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

    Hello

    Browse the following post

    Failed to create the application of FDM

    (mark this message as useful or appropriate if that helps!)

    concerning

    -DM

  • RC-40201: unable to connect to the database

    Hi Experts,

    While running 'perl adcfgclone.pl appsTier' I get below error.

    [applmgr@tfnvlskp01 bin] $ perl adcfgclone.pl appsTier

    Enter the password [APPS] APPS:

    ....

    ....

    Enter the number of the port pool [0-99]:

    70

    Audit of the pool of port 70

    fact: Port pool 70 is free

    Information available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst complete port

    Checking the connection to the base...

    RC-40201: unable to connect to the TEST database.

    Enter the listener of the port database [1531]: 1526

    RC-40201: unable to connect to the TEST database.

    Could not establish connection to database on Port 1526.

    Please verify that the database is running.

    Make sure that the Port DB corresponds to that used on the dbTier.

    ERROR: creation of context not completed successfully.

    Please check for errors in the /tmp/adcfgclone_28867.err file

    But when I check the listener and the DB to db node status, everything is running.

    STATUS of the LISTENER

    ------------------------

    Alias TEST

    Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production

    Start date October 14, 2013 06:33:49

    Uptime 0 days 0 h 0 min 0 sec

    Draw level off

    Security ON: OS Local Authentication

    SNMP OFF

    Parameter Listener of the /app/orabin/testdb/11.2.0/network/admin/TEST_tfnslskp01/listener.ora file

    The listener log file /app/orabin/testdb/11.2.0/log/diag/tnslsnr/tfnslskp01/test/alert/log.XML

    Summary of endpoints listening...

    (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROCTEST)))

    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=tfnslskp01.d1.peapod.com) (PORT = 1526)))

    Summary of services...

    Service 'PLSExtProc' has 1 instance (s).

    Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

    Service 'TEST' has 1 instance (s).

    Instance of 'TEST', status UNKNOWN, has 1 operation for this service...

    The command completed successfully

    SQL > select instance_name, status from v$ instance;

    STATUS INSTANCE_NAME

    ---------------- ------------

    OPEN TEST

    Outputs information complete port available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst

    List of allocated ports based on port 70 pool *.

    Web listening port: 8070

    Database port: 1591

    RPC port: 1696

    Reports port: 7070

    OPROC Manager of Port: 8170

    Web PLSQL Port: 8270

    Port of servlet: 8870

    Listening port of forms: 9070

    Data port for the server Metrics: 9170

    Req server settings. Port: 9270

    JTF Fulfillment Server Port: 9370

    Map Viewer Servlet Port: 9870

    Utility Web OEM port: 10070

    VisiBroker OrbServer Agent Port: 10170

    ACEM Server Port: 10620-10625

    ACEM Telnet Port: 10620,10622,10624

    ACEM Port Dispatcher: 10580-10583

    Range of ports OACORE Servlet: 16700-16709

    Port range of discoverer Servlet: 17700-17709

    Port range of forms Servlet: 18700-18709

    Port TCF: 15070

    Range of ports XMLSVCS Servlet: 19700-19709

    Port of Java object Cache: 12415

    iMeeting Collaboration Server Port: 9570

    iMeeting the registration Server Port: 9670

    iMeeting iMon port Monitor Port: 9770

    Please let me know if the value portpool.lst to the Port of database should be 1526

    Or

    Miss me a few concepts here and I have to choose another port instead of the 70 pool value.

    OS - RHEL 5.4 version (64-bit)

    Version of DB - 11.2.0.3

    Version of the EBS - 11.5.10.2

    -Thank you

    Hello

    This is what has been done on my previous post on the basin of the port and the listening port you are trying to connect, as above, that you use 70 portpool was offset... This is what did not create a connection on port 1526 (which means chicken port 5)

    anyway nice to hear that the problem is now resolved

    Please mark the thread as answered and close it.

    Thank you &

    Best regards

  • SGC does not start - unable to connect to the database

    Hi all

    My development/test environment is unbootable SGD. This has really we stopped in our tracks...

    He'll start the WebTier, but CMS will not come to the top:

    [Journal of the oracle@ora-emcc] $ $OMS_HOME/bin/emctl status SGD

    Oracle Enterprise Manager Cloud control 12 c Release 2

    Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

    WebTier is in place

    Oracle Management Server does not work for the following reason:

    Unable to connect to the repository database. SGD will be automatically restarted once he identifies database and the listener are on the rise.

    Try to check the details SGD results in an error as well:

    [config oracle@ora-emcc] $ $OMS_HOME/bin/emctl status who-details - sysman_pwd $SYSMAN_PWD

    Oracle Enterprise Manager Cloud control 12 c Release 2

    Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

    Exception in thread "main" java.util.MissingResourceException: can't find bundle for the base oracle.security.jps.internal.common.resources.keystore.KeyStoreResources, locale name

    at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)

    at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)

    at java.util.ResourceBundle.getBundle(ResourceBundle.java:952)

    to oracle.security.jps.util.JpsBundle. < init > (JpsBundle.java:70)

    at oracle.security.jps.util.JpsBundle.getResourceBundle(JpsBundle.java:151)

    at oracle.security.jps.util.JpsBundle.getResourceBundle(JpsBundle.java:106)

    at oracle.security.jps.JpsLocalizableException.getResourceBundle(JpsLocalizableException.java:157)

    at oracle.security.jps.JpsLocalizableException.getLocalizedMessage(JpsLocalizableException.java:140)

    at oracle.security.jps.JpsLocalizableException.getLocalizedMessage(JpsLocalizableException.java:131)

    at java.lang.Throwable.toString(Throwable.java:343)

    at java.lang.String.valueOf(String.java:2826)

    at java.lang.StringBuilder.append(StringBuilder.java:115)

    at java.lang.Throwable.printStackTraceAsCause(Throwable.java:536)

    at java.lang.Throwable.printStackTraceAsCause(Throwable.java:545)

    at java.lang.Throwable.printStackTraceAsCause(Throwable.java:545)

    at java.lang.Throwable.printStackTrace(Throwable.java:516)

    at org.apache.log4j.spi.ThrowableInformation.getThrowableStrRep(ThrowableInformation.java:59)

    at org.apache.log4j.spi.LoggingEvent.getThrowableStrRep(LoggingEvent.java:342)

    at org.apache.log4j.WriterAppender.subAppend(WriterAppender.java:304)

    at org.apache.log4j.RollingFileAppender.subAppend(RollingFileAppender.java:234)

    at org.apache.log4j.WriterAppender.append(WriterAppender.java:159)

    at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:230)

    at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:65)

    at org.apache.log4j.Category.callAppenders(Category.java:203)

    at org.apache.log4j.Category.forcedLog(Category.java:388)

    at org.apache.log4j.Category.error(Category.java:319)

    at oracle.sysman.emctl.oms.PrintOMSSetupInfo.main(PrintOMSSetupInfo.java:240)

    In the WebLogic administration Console, I see the BEEP, EMGC_ADMINSERVER, and EMGC_OMS1 are all in the State Running and health Ok.

    Our servers SGD and OMR are (and have always been) 2 different machines. The database on OMR has always been (and is currently) high and available.

    Checking that I can connect to the database of repository on the SGD server OMR:

    [oracle@ora-emcc ~] $ sqlplus sysman / $SYSMAN_PWD@ora-emccdb:1521 / emccdb

    SQL * more: version 11.1.0.7.0 - Production on Thu Nov 10 23:34:53 2013

    Copyright (c) 1982, 2008, Oracle.  All rights reserved.

    Connected to:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    SQL >

    Any suggestion will be highly appreciated.

    Ed

    Hi Mathieu,

    Thanks for the comments. I just got an update of Oracle on the SR with a few more instructions on different things to try/run.

    I met problems with Weblogic in step 1 and could not understand the multitude of possible causes. After some googling I found others who has ended up just restart that did the trick. It worked for me as well as far as I can see now. I'll do some tests to check, but well.

    Thank you

    Ed

  • RC-40201: unable to connect to the TEST database running adcfgclone.pl appsTier

    Hi Experts,

    While performing a cloning my instance of R12, I got RC-40201 error when I ran "adcfgclone.pl appsTier.

    [appltst@oracleupk bin] $ perl adcfgclone.pl appsTier

    Copyright (c) 2002 Oracle Corporation

    Redwood Shores, California, USA

    Applications Oracle rapid Clone

    Version 12.0.0

    adcfgclone Version 120.31.12010000.1

    Enter the password for APPS:

    Running:

    / data/appl_top/apps/apps_st/comn/clone/bin /... / JRE/bin/Java-Xmx600M - cp /data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext EI/data/appl_top/apps/apps_st/comn/clone/bin /... /Context/Apps/CTXORIG.xml-valider - pairsfile /tmp/adpairsfile_24425.lst-stade/data/appl_top/apps/apps_st/comn/clone 2 > /tmp/adcfgclone_24425.err; ECHO $? > /tmp/adcfgclone_24425.res

    Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

    Provide the values required for the creation of the new file APPL_TOP context.

    Target System Hostname (virtual or normal) [oracleupk]:

    SID data system target: TEST

    Target database system [oracleupk] server node:

    Target system Base Directory: / data / appl_top

    Target system tools ORACLE_HOME directory [/ data/appl_top/apps/tech_st/10.1.2]:

    Target Web ORACLE_HOME directory system [/ data/appl_top/apps/tech_st/10.1.3]:

    Target system APPL_TOP directory [/ data/appl_top/apps/apps_st/appl]:

    Target system COMMON_TOP directory [/ data/appl_top/apps/apps_st/comn]:

    Target system Instance home directory [/ data/appl_top/inst]:

    Target system service root [activated]:

    Target Web Entry Point [active] System Services:

    Target [active] System Web Application Services:

    Target [active] Batch Processing Services system:

    Other Services target system [off]:

    You want to preserve the display [oracleupk:0.0] (y/n)? : n

    Target display system [oracleupk:0.0]: oracleupk:1.0

    System Target Pool [0-99] port: 80

    Audit of the pool of port 80

    fact: Port 80 pool is free

    Report file is located at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst

    Information available at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst complete port

    RC-40201: unable to connect to the TEST database.

    Create the new file APPL_TOP context of:

    /Data/APPL_TOP/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp

    The new context APPL_TOP file was created:

    / Data/APPL_TOP/inst/Apps/TEST_oracleupk/Appl/admin/TEST_oracleupk. XML

    Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

    Check the context Clone logfile /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log for more details.

    Clone of fast running with the command:

    Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

    Running:

    Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

    Apps for password:

    Start application layer apply - Fri Oct 12 15:01:20 2013

    / données/appl_top/apps/apps_st/comn/clone/bin /... /jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/data/appl_top/apps/apps_st/comn/clone/ jlib/Oui/share.jar:/data/appl_top/apps/apps_st/ Comn/clone/jlib/Oui/srvm.jar:/Data/APPL_TOP/Apps/apps_st/COMN/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier EI /data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml-/data/appl_top/apps/apps_st/comn/clone - scene showProgress

    Password APPS: log file located at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log

    -79% completed

    ERROR when executing apply...

    Fri Oct 12 15:07:47 2013

    ERROR: Cannot run /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl

    Contents of the log file: -.

    [AutoConfig error report]

    The following report lists the errors autoconfig met in each

    execution phase.  Errors are grouped by directory and by phase.

    The format of the report is:

    < file name > < phase > < eventually return code >

    [INSTALLATION STAGE]

    AutoConfig could not successfully run the following scripts:

    Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

    adgendbc.sh INSTE8_SETUP 1

    afcpnode.sh INSTE8_SETUP 1

    afgcsreg.sh INSTE8_SETUP 1

    txkWfClone.sh INSTALL_SETUP 1

    [PROFILE PHASE]

    AutoConfig could not successfully run the following scripts:

    Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile = / data/appl_top/inst/apps/TEST_ oracleupk/admin /. install

    afwebprf. SQL INSTE8_PRF 1

    amscmprf. SQL INSTE8_PRF 1

    amswebprf. SQL INSTE8_PRF 1

    bisadmprf. SQL INSTE8_PRF 1

    bisdblrp. SQL INSTE8_PRF 1

    clnadmprf. SQL INSTE8_PRF 1

    cncmprf. SQL INSTE8_PRF 1

    cseadmprf. SQL INSTE8_PRF 1

    csfadmprf. SQL INSTE8_PRF 1

    csiadmprf. SQL INSTE8_PRF 1

    eamadmprf. SQL INSTE8_PRF 1

    fteadmprf. SQL INSTE8_PRF 1

    ibywebprf. SQL INSTE8_PRF 1

    icxwebprf. SQL INSTE8_PRF 1

    oksfrmprf. SQL INSTE8_PRF 1

    wshadmprf. SQL INSTE8_PRF 1

    Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

    adadmprf.sh INSTE8_PRF 1

    admk80ln.sh INSTALL_PRF 1

    afadmprf.sh INSTE8_PRF 1

    afcpctx.sh INSTE8_PRF 1

    afcpgsm.shINSTE8_PRF1
    igccmprf.shINSTE8_PRF1
    jtfictx.shINSTE8_PRF1
    okladmprf.shINSTE8_PRF1
    txkJavaMailerCfg.shINSTE8_PRF1
    txkWebServicescfg.shINSTE8_PRF1

    [APPLY PHASE]

    AutoConfig could not successfully run the following scripts:

    Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/data/appl_top/inst/apps/TEST_oracleupk/admin/install
    adadmat.plINSTE8_APPLY1

    Fate of 31 stateful auto-configuration

    RC-50014: Fatal: failed to run the auto configuration service

    Asked by oracle.apps.ad.clone.ApplyApplTop

    ERROR: AutoConfig completed with errors. Check the logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log for more details.

    ApplyApplTop completed successfully.

    # Check the race situation AutoConfig of ApplyApplTop

    WARNING: The autoconfiguration service has completed with errors.

    Please help me solve this problem, your prompt response will be highly appreciated.

    -Thank you

    Ankur

    Audit of the pool of port 70

    fact: Port pool 70 is free

    You used port 70 for the node of the database layer, so you will need to use the same port pool (70 instead of 80) when running "perl adcfgclone.pl appsTier.

    Thank you

    Hussein

  • DOUBLE DB: ORA-17629: unable to connect to the remote database server

    [oracle@ora11g1 ~] $ export ORACLE_SID = sales
    [oracle@ora11g1 ~] $ rman target sys/sales@sales

    Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013

    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.

    connected to target database: SALES (DBID = 690066655)

    RMAN > Connect auxiliary sys/salestby2@salestby2

    connected to the auxiliary database: SALES (not mounted)

    RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
    2 > DB_NAME SET = 'sales '.
    3 > SET DB_UNIQUE_NAME = "salestby2".
    4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
    5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
    6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';

    From duplicate Db 5 June 13
    using the control file of the target instead of recovery catalog database
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID = 20 type of device = DISK

    content of Script memory:
    {
    backup that copy reuse
    TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
    ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
    ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
    ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
    clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
    }
    execution of Script memory

    From backup 5 June 13
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID = 58 type of device = DISK
    RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
    ORA-17629: unable to connect to the remote database server
    ORA-17627: ORA-01017: name of user and password invalid. connection refused
    ORA-17629: unable to connect to the remote database server
    continue other job steps, not a not working will not re-run
    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
    RMAN-03015: an error has occurred in the script stored memory Script
    RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
    ORA-17629: unable to connect to the remote database server
    ORA-17627: ORA-01017: name of user and password invalid. connection refused
    ORA-17629: unable to connect to the remote database server

    Welcome to the oracle forums!

    Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

    Always after 4 version oracle numbers and details of the OS.

    Post any request outside has put between.

      \

    Tags

    Mark your questions answers if you give the answer

    Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

    SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

  • Unable to connect to the database, check the creation of credentials 11.1.2.3 FDM

    Hi all

    I installed the Hyperion 11.1.2.3 with Oracle 11 g version. Installation and Configuration completed successfully.

    I am able to connect to Essbase, Planning, HFM. but when I try to create FDM app, I get an error message

    Unable to connect to the database, check the database credentials.

    If one is confronted with the same problem, please help me to solve this problem.

    Kind regards
    Mady

    You have added the basic data for the FDM database information in the tnsnames file, the location of the file used by EPM are defined by the TNS_ADMIN environment variable

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • FDM Create Application Error: Unable to connect to the database.

    Hello
    While trying to create a new application of FDM, I am not able to connect to the database. error: "unable to connect to the database. Please check the databases and verify the database is '. '. able to connect to the DB using the command line.

    I created the user in Oracle with access s/n (provided permissions: RESOURCE, CONNECT, CREATE SESSION, CREATE VIEW, CREATE DATABASE LINK)
    Oracle 32-bit client is installed with windows server 2008 R2 64-bit.

    I need to update the variable path or any other parameter that needs to be updated.
    Please help solve this problem.

    Hello

    I tried test the connection to the database of FDM help a 32-bit UDL file to check the 32-bit Oracle Client is installed and where the provider OLE DB for Oracle was not available.
    It was a problem with the installation of the Oracle customer 11.2.0.3, it seems that it is a known bug (NOTE > install the 11.2.0.3 Oracle OLE DB provider since the installation of Client media registers properly the provider [ID 1380742.1] Bug: 13417266 WHILE upgrading from 11.2.0.3, Setup is unable to REGISTER DLL ORAOLEDB).
    We have installed Oracle earlier version client and have seen the for Oracle OLEDB provider.
    After this created FDM application successfully.

    Thank you

  • EPMCFG - 10368, unable to connect to the database, check information for database

    Hi all

    Server: Windows server 2008 64-bit, and 64-bit Oracle 11 g

    First of all, I have installed Oracle client 32-bit and 64-bit client then Database 11 g. Then, I installed the version hyperion 11.1.2.2. but at configuration time, I get the error message
    EPMCFG - 10368 unable to connect to the database, see database documentation.

    but the correct database information that I have given. Map of Loopback also installed Microsoft.

    I spoke in the forums about this error, in this discussion, they wrote about tnsnames.ora. I need to edit in this file?

    Kind regards
    Mady

    Published by: mady on March 20, 2013 10:47

    Hello

    I have uninstalled and installed OS again once, now I am able to connect to the database now.

    See you soon,.

    Mady

  • E.M.P. 11.1.2.2 Config Error - EPMCFG-10368: unable to connect to the database.

    Hello

    I found the error when configuring EPM 11.1.2.2 below system

    Error message indicated as "EPMCFG-10368: unable to connect to the database." Check the database connection information'.

    Environment: Windows XP SP2, SQL Server 2005.

    Please help me solve the problem. Please also find the screen shot to http://ge.tt/6xqpj0L/v/0?c

    Kind regards
    Naveen

    Published by: Naveen on July 25, 2012 17:35

    Windows XP is not supported for client components not, I recommend that you install on an operating system that is supported so usually, when there is trouble connecting to SQL Server, it is down from TCP/IP not been activated, also correct for a static port, make sure that no firewalls are in place.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • ORA-17629: unable to connect to the remote database server

    Hello

    I have put Dataguard in place with primary and 1 physical standby for learning/test database:

    I do NOT plan the unloading of RMAN backups on the physics of the day before.

    Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
    I get the following error:
    ---------------------------------------------------------------------------------------------------------------------
    RMAN > catalog resync db_unique_name all;
    from full resynchronization of the recovery catalog
    full complete Resync
    resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
    ORA-17629: unable to connect to the remote database server
    ORA-17628: Oracle 17629 error returned by remote Oracle Server
    ------------------------------------------------------------------------------------------------------------------
    Configuration of RMAN for the main proceedings are the following:

    RMAN > show all to db_unique_name asttest;

    RMAN settings for database with db_unique_name ASTTEST are:
    CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
    CONFIGURE BACKUP OPTIMIZATION # by default
    SET UP DEFAULT DISK DEVICE TYPE; # by default
    CONFIGURE CONTROLFILE AUTOBACKUP # by default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
    SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
    CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
    CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
    CONFIGURE ENCRYPTION OF DATABASE # by default
    CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
    CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
    CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
    CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
    CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default

    Configuration of RMAN for instance physical standby are:

    RMAN > show all to db_unique_name asttestb;

    RMAN settings for database with db_unique_name ASTTESTB are:
    CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
    CONFIGURE BACKUP OPTIMIZATION # by default
    SET UP DEFAULT DISK DEVICE TYPE; # by default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
    SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
    CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
    CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
    CONFIGURE ENCRYPTION OF DATABASE # by default
    CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
    CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
    CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
    CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
    CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default

    ----------------------------------------------------------------------------------------------------------------------

    When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)

    However, missing datafile scenario does not work on the physics of the day before.
    Here are the steps I followed:
    ********************************************
    1 renamed a file of physical data - in standby mode:

    bash - $3.2 ls - ltr

    Total 107832

    -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

    -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

    -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf

    bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old

    bash - $3.2 ls - ltr

    Total 107832

    -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

    -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

    -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old


    2. restore the datafile (find the data file # view v$ recover_file):
    RMAN > restore datafile 5;



    From restoration to 5 October 11

    Segmentation fault


    3. in spite of the error, published "recover datafile command.

    4 RMAN > recover datafile 5;



    From pick up to 5 October 11

    allocated channel: ORA_DISK_1

    channel ORA_DISK_1: SID = 10 type of device = DISK

    RMAN-00571: ===========================================================

    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

    RMAN-00571: ===========================================================

    RMAN-03002: failure of the command recover at 05/10/2011 12:00:40

    RMAN-06094: datafile 5 must be restored.


    5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
    bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.

    rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03

    bash - $3.2 ls - ltr

    Total 159096

    -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

    -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

    -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old

    -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf


    RMAN > recover datafile 5;



    From pick up to 5 October 11

    using channel ORA_DISK_1



    RMAN-00571: ===========================================================

    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

    RMAN-00571: ===========================================================

    RMAN-03002: failure of the command recover at 05/10/2011 12:01:59

    RMAN-06067: RECOVER the DATABASE required with a backup control file or created


    6. of course RMAN commands have failed to restore the missing data file;
    So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
    *********************************************************************************

    Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.

    The documentation I want to talk to is here (1 paragraph):

    [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]


    Any pointers/direction and advise is greatly appreciated.

    Best regards
    NK

    I got it!

    /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog

Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: PRIMARY (DBID=1562898590, not open)
connected to recovery catalog database

RMAN> resync catalog from db_unique_name all;

resyncing from database with DB_UNIQUE_NAME PRIMARY
starting full resync of recovery catalog
RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
full resync complete

    If the necessary connection string a target/sys and a catalogue

    RMAN target sys / catalog /@rcatalog

    I did my standby

    Will try the primary

    Best regards

    mseberg

    Work on both. Great question!

    connected to target database: PRIMARY (DBID=1562898590)
connected to recovery catalog database

RMAN> resync catalog from db_unique_name all;

starting full resync of recovery catalog
full resync complete

resyncing from database with DB_UNIQUE_NAME STANDBY
RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY

RMAN>

    Published by: mseberg on October 7, 2011 14:16

    Thanks a ton for sticking to it. I'll add this little thing to my web site.

    Published by: mseberg on October 7, 2011 14:22

  • Unable to connect to the database instance: ORA-28001: the password has expired

    Hi all

    I'm on oracle 11g grid.


    I get unable to connect to the database instance: ORA-28001: the password has expired (ERROR of DBD: OCISessionBegin) error.

    I checked and found that my user dbsnmp expired password. I found the page on the grid control to change the password of user dbsnmp.

    but I want to know. If I changed dbsnmp password using the grid control. Is there any other task I have to do after the change of user dbsnmp password.

    Please let me know.


    Thank you

    Hi PK,.

    If GC can reuse the monitored GENERAL to connect to the database account I can't think of anything you should do.
    The database, what has happened is an 11g database? If so the security policy has been changed in this version, which means that in half a year you will still have a locked account of DBSNMP.

    If your company security policy allows, you can avoid this by changing the password_life_time to an unlimited number of default profile:
    change the default profile limit password_life_time unlimited;

    Eric

Maybe you are looking for