FRM - 41214 Reports error message

Similar Questions

• Apple Hardware Test reports error message

  If you want history, scroll to the bottom. Here's the short version: Apple Hardware Test indicates error 4SNS/1/40000001:VeAS-0.000

  This page handy tells my that '4SNS' = a sensor problem. 'V' indicates that it is a voltage sensor; and 'e' is short for PCIe. There is nothing on AS - 0, 000 but I'll allow myself that it could indicate the location PCIe 0, i.e. the bottom, 16 channels gpu 'main' slot. If anyone can confirm or correct this assumption, that would be sweet.

  Most important: how serious a mistake it is? I have a Radeon HD 7970 GHz 3 GB edition. I'm he put at risk by continuing to use it? I plan to play a lot more, some on El Capitan, but more on Windows, where I can experiment with overclocking my already factory overclocked GPU. It doesn't seem to be a problem in terms of overclocking software is. Reports of tension, times and speeds of fan exactly as expected.

  And the main reason I upgraded from my great MacPro1 OG, 1 to a 4.1 is because I intend to upgrade GHz W3520 2.66 in the 4.1 to a 3.46 GHz W3690. With the upgrade of the processor, I had planned to keep this box for several years. This error indicates that this particular Mac Pro is less great, or maybe even a lemon?

  The seller is apologetic and will accept a return. Which will cost me $40. I would stay there or is it really not a problem. It was really a lot...

  As you stock up on for Apple hardware Test error messages are very cryptic and not really documented.

  I don't know of anyway to know if it's a "fatal" flaw

• Shortcuts Office report error messages

  Greetings,

  I am running Windows 7 Home Premium with a fast and relatively new PC.  Until recently Windows 7 has fonctionnee welland then all of a sudden an irritating thing started and is going on is that some of my program launch shortcuts on my desktop of PC report an error message that looks like this:

  _____________________________________________________________________________________________________________________

  Open file - security warning

  We cannot verify who has created this file.  Are you sure you want to

  Open this file?

  Name:... s\Stan\Favorites\Desktop\... l

  Type: shortcut

  From: C:\Users\Stan\Favorites\Desktop\...

  [Open]          [Cancel]

  (Photo by shield w X through it)  This file is located in a place outside your local network.  Files from

  you don't recognize the places not can harm your PC.  Only open this file

  If you trust the location.   What is the risk?

  ___________________________________________________________________________________________________________________

  When I click on [open] on the message to continue launching the program, the programs starts without problems.   Moreover, only one of the programs immediately accesses internet... the usual suspect for the generation of warning messages... and it is my browser program.  As for the 'local network', I have a small LAN Ethernet in my house that connects to two other PCs.

  Can someone offer me some suggestions on what can be the cause and how can I solve this problem?

  Thanks in advance for any help,

  Stan

  Kylan,

  More info on a fix for the desktop shortcuts that emit warnings about shortcuts is a security risk.  In my first reply to you I told you that I had this problem by opting for Fire Fox for my browser.   Well today, I came to a real fix for this problem.   Since my wife had I.e. Explorer upgraded to 10 about a month at the same time, she had replaced HD, she was plagued by launches web pages slow, slow download, etc etc.   When she contacted our ISP in this regard the tech did reset the settings of the default Explorer and his PC... as extreme speed of internet access will... became a race car.

  On a hunch, I tried the same thing with my PC and bingo, warning of shortcut messages went.

  Here's what I did with my 7 winders.   I opened Explorer, found and open tools on the menu bar, and launched the Internet Options.   I then clicked on the Advanced tab, and then find "Settings Reset Internet Explorer to its default state."    I then finally clicked the [Reset] button for this.   IT IS EVERYTHING.

  I hope it works for you.  (I have empathy for you an I.T. Guy because I had once this work too)

  Sincerely,

  Stan: Maer

• Interactive validation report error messages...

  Hi guys!
  
  I was looking for answer to this question for some time... is it possible to change the interactive report validation error messages?
  
  With respect,
  
  PsmakR

  Hello

  There are validations more than you think. Anthony Rayner has prepared a good summary in a blog post [url http://anthonyrayner.blogspot.com/2010/08/apex-40-enhancements-validating-form.html].
  You see in this post, where and how to disable the validations, but also, that you cannot disable all the. The only way to avoid all postings would be to implement yourself the report completely.
  The good news is, you can replace these messages. The following documentation tells you how to:
  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/global.htm#CHDEDHBJ

  -Udo

• 'FIRST' must be reported error message

  Hi team,

  I have object SERVICE_TYPE

  If I run the script below it works well.

  DECLARE

  V_Service SERVICE_TYPE;

  BEGIN

  V_Service: = SA_RQA. F_ID_Service_By_ST (147685094, "SF4");

  -DBMS_OUTPUT. Put_line (V_Service);

  IF V_Service IS NOT NULL THEN

  DBMS_OUTPUT. Put_line ('w');

  END IF;

  END;

  But if I type loop error

  DECLARE

  V_Service SERVICE_TYPE;

  BEGIN

  V_Service: = SA_RQA. F_ID_Service_By_ST (147685094, "SF4");

  -DBMS_OUTPUT. Put_line (V_Service);

  IF V_Service IS NOT NULL THEN

  FOR i IN V_Service.FIRST... V_Service.last

  LOOP

  DBMS_OUTPUT. Put_line (V_Service (i) .value);

  END LOOP;

  END IF;

  END;

  Error report-

  ORA-06550: line 7, column 24:

  PLS-00302: component 'FIRST' must be declared

  ORA-06550: line 7, column 5:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  Guild me please.

  Looks like SERVICE_TYPE is not a collection type?

  Please post the result of the execution:

  DESCRIBE SERVICE_TYPE
  

• Doc.saveAs () method to get an error message

  Hi all

  I want to save a pdf file under a range of png with the saveAs() method files.

  this.saveAs ({cPath: "/ E/temp/temp.png", cConvID: "com.adobe.Acrobat.png"});

  I have run this script and choose a pdf file to process.

  But get an error like this,

  ---------------------------------------------

  UnsupportedValueError: The value is not supported. = > Parameter cConvID.
  Undefined Doc.saveAs:1:Batch: Exec

  It seems that something wrong with the cConvID parameter. com.adobe.Acrobat.png is in the cConvID of Acrobat Javascript API Docs lists, why it could report error message?

  ENV: Windows/Acrobat 9.0 Pro

  Think in advance.

  Kind regards

  -gavin

  It should be "com.adobe.acrobat.png", not "com.adobe.Acrobat.png".

  JavaScript is case sensitive...

• ERROR FRM-41214 weblogic 10.3 + form + reports 11g

  When I try to generate a report, I get this error: FRM-41214
  and I log file check locate on /oracle/Midleware/asinst_1/diagnostics/logs/ReportsServerComponent/my_ReportsServer/rwEng-0_diagnostic.log
  
  and I found the last lines:
  
  [2011 11-29 T 16: 36:20.429 - 06:00] [reports] [NOTIFICATION] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] EngineImpl:run oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
  [2011 11-29 T 16: 37:07.306 - 06:00] [reports] [ERROR] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] rwfdt:rwfdtprint Job ID = 143 ERR error sending out tasks to be cached
  [2011 11-29 T 16: 37:07.306 - 06:00] [reports] [ERROR] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] engine C Job ID = 143 ERR REP-1804: BANCO printer definition file cannot be opened.
  [2011 11-29 T 16: 37:07.308 - 06:00] [reports] [INCIDENT_ERROR] [REP-1804] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] REP-1804: BANCO printer definition file cannot be opened. [[
  
  oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
  at oracle.reports.engine.EngineImpl.run(EngineImpl.java:553)
  at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:104)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
  at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500)
  
  
  Help, please!

  Hello

  This error means that the file Banco.prt is not found.

  The definition of the printer (file .prt) file not found in the REPORTS_PATH directories.

  By default, these files are located in $ORACLE_HOME/reports/printers and this directory is located at REPORTS_PATH

  -> Check the value of REPORTS_PATH
  -> Check if BANCO.prt exists in a directory of REPORTS_PATH

  Concerning

• Component report to Oracle forms 12g frm-41214 frm-41217

  I run http://sidpsistemas:9002/reports/rwservlet?server=rep_wls_reports_sidpsistemas+report=REPORTE_DE_MOVIMIENTOS.rdf+destype... is ok

  I try to call a report forms (Oracle 12 g): error frm-41214 frm-41217

  DECLARE
  REPORT_ID Report_Object;
  ReportServerJob VARCHAR2 (254);
  rep_status VARCHAR2 (100): = ";
  vjob_id VARCHAR2 (4000): = ";
  report_server_name VARCHAR2 (100): = "rep_wls_reports_sidpsistemas";
  reports_servlet VARCHAR2 (100): =' http://sidpsistemas:9002/reports/rwservlet ';
  BEGIN
  REPORT_ID: = find_report_object ('REPORTE_DE_MOVIMIENTOS');
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_DESTYPE, cache);
  SET_REPORT_OBJECT_PROPERTY (report_id, REPORT_DESFORMAT, 'HTMLCSS');
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_SERVER, report_server_name);
  SET_REPORT_OBJECT_PROPERTY (report_id, REPORT_OTHER, 'Ms =' |: internos.ms |) » '||
  "Me ='|:internos.me | '||
  "Ao ='|:internos.ao | '||
  'rep_de =' | : rep_de | » '||
  'usu =' | : Usuario | » '||
  = no ");"

  ReportServerJob: = run_report_object (report_id);
  rep_status: = report_object_status (ReportServerJob);

  Roberto.

  Please see the release notes for forms and reports 12 c, section:

  2.3.8 oracle reports integration requires the new Environment Variable

  https://docs.Oracle.com/middleware/1221/formsandreports/FRREL/forms.htm#FRREL5296

  Kind regards

  Alexandra

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• What happens when you disable the service "Windows Error Reporting Service" in order to avoid an annoying and misleading popup error message?

  I kept getting annoying "authentication failure.  Please check your user name and password of the account '... xyz. "" error every 30 seconds. "

  I tried to restore my system and antivirus running - even to reinstall my anti-virus.  I deleted the accounts in question and kept still getting the error message.  Note, receive emails has never been a problem.

  I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared.  Is it correct to keep this function disabled?

  Thank you.

  To check the event logs, go to start / Control Panel / administrative tools / event handler.

  To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.

  I hope this helps.  You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually.  WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew.  This is a "nice to have" feature - not absolutely necessary.  We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Foglight - report - history alarm / Error Messages

  Hello

  I want to create a report that shows all mortals have taken place-alarms and error messages (history of the alarm).

  Is it possible to do that?

  Thank you

  You can also create a new report and choose the alamrs with a filter template list

  

  then apply a filter on gravity

  

  You then just add the headers, the images, the texts that you hear and annex / generate the report

  

  Golan

• Report of the seller does not. Here is the error message

  org.apache.ibatis.exceptions.PersistenceException: # error by querying the database. Cause: org.jboss.util.NestedSQLException: could not get a connection managed to isvportalReportingDatasource; -nested throwable: (javax.resource.ResourceException: could not get a connection managed to isvportalReportingDatasource) # the error may exist in net/rim/portal/backend/reports/Report.xml # error can involve Report.getDataForChartPurchase # error occurred when executing a query # Cause: org.jboss.util.NestedSQLException: could not get a connection managed to isvportalReportingDatasource; -nested throwable: (javax.resource.ResourceException: could not get a connection managed to isvportalReportingDatasource)

  Correct the problem.

  I don't get this error message, but since yesterday that I have also a problem signing the portal provider... This could be due to the update of the supplier portal, which they announced several weeks ago... so I guess they will load soon.

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Error message: the following error is reported: 2147750704

  It seems that Windows 8 Pro shares a bug with Windows Server 2012: Task Scheduler is asked to display a message or send an e-mail it does not accept it and displays the error message above. Planning to start a program works very well. This is a bug that has been reported for Windows Server, already in 2012, but it seems not yet to be resolved.

  (A workaround solution was given by Vishal Gupta: http://www.askvg.com/fix-cant-create-tasks-to-display-messages-in-windows-8-task-scheduler/ but Microsoft should fix the problem)

  It seems that Windows 8 Pro shares a bug with Windows Server 2012: Task Scheduler is asked to display a message or send an e-mail it does not accept it and displays the error message above. Planning to start a program works very well. This is a bug that has been reported for Windows Server, already in 2012, but it seems not yet to be resolved.

  (A workaround solution was given by Vishal Gupta: http://www.askvg.com/fix-cant-create-tasks-to-display-messages-in-windows-8-task-scheduler/ but Microsoft should fix the problem)

  Hello

  When you see a feature or an option that shows "Obsolète", this means that the developers intentionally deleted this option in this version of Windows. I saw no information about why this option has been removed.

  If you want to use this option, you must use the workaround documented Vishal.

  Concerning