Similar Questions

• Apple Hardware Test reports error message

  If you want history, scroll to the bottom. Here's the short version: Apple Hardware Test indicates error 4SNS/1/40000001:VeAS-0.000

  This page handy tells my that '4SNS' = a sensor problem. 'V' indicates that it is a voltage sensor; and 'e' is short for PCIe. There is nothing on AS - 0, 000 but I'll allow myself that it could indicate the location PCIe 0, i.e. the bottom, 16 channels gpu 'main' slot. If anyone can confirm or correct this assumption, that would be sweet.

  Most important: how serious a mistake it is? I have a Radeon HD 7970 GHz 3 GB edition. I'm he put at risk by continuing to use it? I plan to play a lot more, some on El Capitan, but more on Windows, where I can experiment with overclocking my already factory overclocked GPU. It doesn't seem to be a problem in terms of overclocking software is. Reports of tension, times and speeds of fan exactly as expected.

  And the main reason I upgraded from my great MacPro1 OG, 1 to a 4.1 is because I intend to upgrade GHz W3520 2.66 in the 4.1 to a 3.46 GHz W3690. With the upgrade of the processor, I had planned to keep this box for several years. This error indicates that this particular Mac Pro is less great, or maybe even a lemon?

  The seller is apologetic and will accept a return. Which will cost me $40. I would stay there or is it really not a problem. It was really a lot...

  As you stock up on for Apple hardware Test error messages are very cryptic and not really documented.

  I don't know of anyway to know if it's a "fatal" flaw

• Shortcuts Office report error messages

  Greetings,

  I am running Windows 7 Home Premium with a fast and relatively new PC.  Until recently Windows 7 has fonctionnee welland then all of a sudden an irritating thing started and is going on is that some of my program launch shortcuts on my desktop of PC report an error message that looks like this:

  _____________________________________________________________________________________________________________________

  Open file - security warning

  We cannot verify who has created this file.  Are you sure you want to

  Open this file?

  Name:... s\Stan\Favorites\Desktop\... l

  Type: shortcut

  From: C:\Users\Stan\Favorites\Desktop\...

  [Open]          [Cancel]

  (Photo by shield w X through it)  This file is located in a place outside your local network.  Files from

  you don't recognize the places not can harm your PC.  Only open this file

  If you trust the location.   What is the risk?

  ___________________________________________________________________________________________________________________

  When I click on [open] on the message to continue launching the program, the programs starts without problems.   Moreover, only one of the programs immediately accesses internet... the usual suspect for the generation of warning messages... and it is my browser program.  As for the 'local network', I have a small LAN Ethernet in my house that connects to two other PCs.

  Can someone offer me some suggestions on what can be the cause and how can I solve this problem?

  Thanks in advance for any help,

  Stan

  Kylan,

  More info on a fix for the desktop shortcuts that emit warnings about shortcuts is a security risk.  In my first reply to you I told you that I had this problem by opting for Fire Fox for my browser.   Well today, I came to a real fix for this problem.   Since my wife had I.e. Explorer upgraded to 10 about a month at the same time, she had replaced HD, she was plagued by launches web pages slow, slow download, etc etc.   When she contacted our ISP in this regard the tech did reset the settings of the default Explorer and his PC... as extreme speed of internet access will... became a race car.

  On a hunch, I tried the same thing with my PC and bingo, warning of shortcut messages went.

  Here's what I did with my 7 winders.   I opened Explorer, found and open tools on the menu bar, and launched the Internet Options.   I then clicked on the Advanced tab, and then find "Settings Reset Internet Explorer to its default state."    I then finally clicked the [Reset] button for this.   IT IS EVERYTHING.

  I hope it works for you.  (I have empathy for you an I.T. Guy because I had once this work too)

  Sincerely,

  Stan: Maer

• Validation FormCalc error message

  I get a validation error (NumFinalCommit validate error) when I enter a currency value USD $ 10 000.00 or more in the field 'Value of the purchase order' or 'Change total opinion' in the upper right corner of the attached PDF file. The FormCalc works properly, but the error message is annoying for end-users.

  Can anyone offer advice on how to disable the validation error message?

  Hello

  The problem is not having a semicolon at the end of your script to the Calculate event. I changed the form and now the error message is not coming...

  Attached is the updated file the...

  Thank you

  Srini

• Table validation - report errors without losing the changes made

  Hi all
  
  I'm experimenting with validation of table from Denes Kubicek example at http://apex.oracle.com/pls/otn/f?p=31517:41. I had no problems to make this work,
  but I need to stop if data loss when the validation rules are not met.
  
  If I have 10 rows in my table and updates user 6 of the latter with the new valid values and 1 with a non valid value then the causes of the button send the error message to be displayed as expected, but the page / table returns to the data in the database and all changes are lost.
  
  How can I get the page to keep entered values when the page is refreshed?
  
  Thank you
  Martin

  Martin,

  You may need to replace the validation using JS. Equivalent to Dene JS for example

  Put this in the HTML Header page...

  
  
  Change the 'Submit' button target to URL and type javascript:f_validate(); as URL Target
  
  Cheers,Hari
  
  Edited by: Hari_639 on Oct 29, 2009 7:07 PM 
  

• 'FIRST' must be reported error message

  Hi team,

  I have object SERVICE_TYPE

  If I run the script below it works well.

  DECLARE

  V_Service SERVICE_TYPE;

  BEGIN

  V_Service: = SA_RQA. F_ID_Service_By_ST (147685094, "SF4");

  -DBMS_OUTPUT. Put_line (V_Service);

  IF V_Service IS NOT NULL THEN

  DBMS_OUTPUT. Put_line ('w');

  END IF;

  END;

  But if I type loop error

  DECLARE

  V_Service SERVICE_TYPE;

  BEGIN

  V_Service: = SA_RQA. F_ID_Service_By_ST (147685094, "SF4");

  -DBMS_OUTPUT. Put_line (V_Service);

  IF V_Service IS NOT NULL THEN

  FOR i IN V_Service.FIRST... V_Service.last

  LOOP

  DBMS_OUTPUT. Put_line (V_Service (i) .value);

  END LOOP;

  END IF;

  END;

  Error report-

  ORA-06550: line 7, column 24:

  PLS-00302: component 'FIRST' must be declared

  ORA-06550: line 7, column 5:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  Guild me please.

  Looks like SERVICE_TYPE is not a collection type?

  Please post the result of the execution:

  DESCRIBE SERVICE_TYPE
  

• FRM - 41214 Reports error message

  Hello
  In some of our machines, my report works sometimes not.
  It throws the error FRM-41214.
  But not the error pops up in the showlogs url.
  But when I re-opening in a fresh IE, it works very well on the same machine.
  Any idea, what is the root cause of
  
  Thanks in advance
  
  A.Gopal

  Hello

  Please clear the cache and check and if you have a toolbar installed, please remove it and also disabled the firewall for sometime and check
  It will be useful.

  Sarah

• ORA-900 sql not valid reporting error while calling the optimize_index pl/sql procedure

  
  Hi Experts,

  I'm on Oracle 11.2.0.3 on Linux and I have installed in my database Oracle text. I want to configure annex dbms_job to optimize my oracle text index. So first, I created a pl/sql procedure to optimize indexes. It gives me error ORA-900, but the sql even if I run in sqlplus works very well! Can you please help me the question is to find:

  Here is the procedure:

  (Either incidentally CTXAPP role has been granted in the schema where these Oracle text indexes are created and where the below procedure to optimize the index is running.)

  CREATE OR REPLACE PROCEDURE optimize_ora_txt_indexes_debug
  IS
     CURSOR cur_context_indexes
     IS
          SELECT index_name
            FROM user_indexes
           WHERE index_type = 'DOMAIN'
      AND ROWNUM<2  
      ORDER BY INDEX_NAME;
     v_user         VARCHAR2 (30);
     v_pod          VARCHAR2 (30);
     v_start_time   TIMESTAMP;
     v_end_time     TIMESTAMP;
     v_elapsed      VARCHAR2 (40);
     v_msg   VARCHAR2 (1000);
     v_error_code      NUMBER;
     v_error_msg   VARCHAR2 (1000);
     v_sql VARCHAR2 (1000);
  BEGIN
  
     FOR c IN cur_context_indexes
     LOOP
        BEGIN
          v_sql:= 'ctx_ddl.optimize_index (idx_name =>'||chr(39)|| c.index_name||chr(39)||', optlevel => '||chr(39)||'FULL'||chr(39)||')';
          dbms_output.put_line(v_sql);
          execute immediate v_sql;
        EXCEPTION
           WHEN OTHERS
           THEN
              v_error_code := SQLCODE;
              v_error_msg := SQLERRM;
              v_msg :=
                    'Error while optimizing the index '
                 || c.index_name
                 || ' '
                 || TO_CHAR (v_error_code)
                 || ' '
                 || v_error_msg;
              DBMS_OUTPUT.put_line (v_msg);
  
        END;
     END LOOP;
  
  EXCEPTION
     WHEN OTHERS
     THEN
        v_error_code := SQLCODE;
        v_error_msg := SQLERRM;
        v_msg :=
              'Error while in the optimize index procedure'
           || ' '
           || TO_CHAR (v_error_code)
           || ' '
           || v_error_msg;
        DBMS_OUTPUT.put_line (v_msg);
  
  END optimize_ora_txt_indexes_debug;
  /
  
   --the procedure compiles successfully. 
   Now when I run it , I get the error:
  SQL>exec optimize_ora_txt_indexes_debug;
  ctx_ddl.optimize_index (idx_name =>'ACCESS_CLNT_IDX04', optlevel => 'FULL')
  Error while optimizing the index ACCESS_CLNT_IDX04 -900 ORA-00900: invalid SQL
  statement
  
  
   --When I run the same command from sqlplus as execute statement , it works fine:
  SQL>exec ctx_ddl.optimize_index (idx_name =>'ACCESS_CLNT_IDX04', optlevel => 'FULL');
  PL/SQL procedure successfully completed.
   
   
  
  
  

  If everything runs from sqlplus, but fails in plsql... I'll be very grateful for pointers solve the problem.

  Thanks,

  OrauserN

  Hello

  It is a problem of pl/sql syntax. A call with EXEC is the same using BEGIN... Code of... END of block;

  SO, you need to include a beginning and an end to your call:

   v_sql:= 'BEGIN ctx_ddl.optimize_index (idx_name =>'||chr(39)|| c.index_name||chr(39)||', optlevel => '||chr(39)||'FULL'||chr(39)||'); END;';
  

  That's all.

  Herald tiomela

  http://htendam.WordPress.com

• Validation error message appears several times in popup

  Hello
  I use Jdeveloper Studio Edition Version 11.1.2.3.0
  
  So basically, I have a validation method on an entity (shifted to the level of the transaction) that runs whenever change 1 of the 4 attributes in the table.
  The table is based on the original Version of course and has clickToEdit in edit mode.
  Validation works fine and survey the message correctly, however, every time you try to navigate away from the record, while it is not valid, the error message is added to the list of error messages in the pop-up window.
  Is there a way to show the error only once? even if the user tries to navigate several times outside the line?
  
  Try to search on the net for some answers, but nothing helped, everything points to a bug, but I wonder if there is a solution.
  
  Thank you!
  MB

  Thanks to our team leader, this has been solved very simply.

  First a javascript method was created in the page using af: resource:

  function clearErrorMessages(event) { AdfPage.PAGE.clearAllMessages(); event.cancel(); }
  

  Then a client listener has been added to the table in question, that connects to this function

  That simple :)

  Best regards.
  MB

• Success/error message with the function

  Hello
  
  I have a table that have all the messages in the application, when I do a validation (return error message) I just call the function with the id and name of field as parameters to send the message.
  
  Now I have to change the Error Message process success, but the field does not accept the PL/SQL Expressions, which is the best way to call the function and display the message in this case?
  
  Thank you
  Alan.

  Hello

  Define the condition "process validations" for those who are executed only if no other validation error
  http://www.talkapex.com/2010/06/conditional-validations-in-apex.html

  Kind regards
  Jari

• Doc.saveAs () method to get an error message

  Hi all

  I want to save a pdf file under a range of png with the saveAs() method files.

  this.saveAs ({cPath: "/ E/temp/temp.png", cConvID: "com.adobe.Acrobat.png"});

  I have run this script and choose a pdf file to process.

  But get an error like this,

  ---------------------------------------------

  UnsupportedValueError: The value is not supported. = > Parameter cConvID.
  Undefined Doc.saveAs:1:Batch: Exec

  It seems that something wrong with the cConvID parameter. com.adobe.Acrobat.png is in the cConvID of Acrobat Javascript API Docs lists, why it could report error message?

  ENV: Windows/Acrobat 9.0 Pro

  Think in advance.

  Kind regards

  -gavin

  It should be "com.adobe.acrobat.png", not "com.adobe.Acrobat.png".

  JavaScript is case sensitive...

• FDM Validation 'error message' report, even after posting correctly

  Hi gurus,

  I created the FDM with active - passive verification and validation report, report is properly difference calculation, as appropriate. Usually it is to short messages on the report. 'Pass' and 'OK' or 'Error' on the line of validation

  If the result of the calculation is a value he gives the message 'Pass' and empty on the line of the result of the calculation, however when the validation result is '0', then it gives 'Pass' and 'Error' message on the line of the result of the calculation.

  We do not want to see this message "error". The posting gave the result, users seek no system message.

  Please can any body guide us how to remove this error message.

  I have attached the screen shot for a better understanding.

  Thank you

  Prince

  You can put in your formula

  (|, TOTASSET, [ICP no], TOTALC1, TOTALC2, TOTALC3, TOTALC4, |) -(|,,, TOTLIABILITY, [ICP aucun], TOTALC1, TOTALC2, TOTALC4, TOTALC4,,, |) = 0

  You want to SPEND if there is zero right?

• Problem with custom validation error message record

  Hi, so I'm having a problem of application an error message customized a validator backup.   I ran the following SQL scripts and updated the XML file as follows:

  INSERT INTO commonXLAExtensionCache VALUES (' 1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ")
  "ClassificationRequired", "ReflectiveRequiredValidator", "Validation rules")

  
  INSERT INTO commonXLAExtensionCacheItem VALUES ('1059666651E8-A7F7-447-8CF5-8EE1F467C20Q',
  "1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ', 0, 'RequiredPropertyMessage ',.
  ' Specification must have a ranking

  < rule type '6501' = >

  < event condition 'save' = >

  < if type = "ReflectiveRequiredValidator" report = "true" required = "true" property = "ProductAttributes.Classifications" msgcache = "ClassificationRequired" / > "

  < / condition >

  < / rule >

  I get an error message:

  Server error in ' / gsm' Application.

  ---

  Object reference not set to an instance of an object.

  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.
  
  Exception details: System.NullReferenceException: Object Reference not set to an instance of an object.
  
  Source of error:
  

  You have the stack trace in the error message? Assuming it's the cache:

  Give a try instead and see if that solves it.

  Delete the original entry and change the name and the inheritfrom of the ValidationMessages/ReflectiveRequiredValidator message cache, as follows:

  INSERT INTO commonXLAExtensionCache VALUES (' 1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ")

  "ValidationMessages/ReflectiveRequiredValidator", "ValidationMessages/ReflectiveRequiredValidator", "Validation rules")

• Trigger the error message if APEX_APPLICATION. G_F01. COUNT is set to null (box in report)

  APEX 4.2

  Hello

  If I have a report and using

  Check in there as follows:

  SELECT APEX_ITEM. "Select", CheckBox(1,ID)

  CNAME, age

  FROM table1

  and then on display report button Delete is placed for deletion, if a check box is selected.

  All these work very well, but I just want to know if no checkbox is enabled and but press the delete button and then

  success message shows that I don't want? I tried to put certain conditions but does not work.

  so, if APEX_APPLICATION. G_F01. COUNT is 0 or null, then it should display the error message?

  Any idea please?

  Thank you.

  RI

  Irha10 wrote:

  so, if APEX_APPLICATION. G_F01. COUNT is 0 or null, then it should display the error message?

  Any idea please?

  Create a validation of Expression PL/SQL using the expression

      apex_application.g_f01 is not null
and apex_application.g_f01.count > 0

  Subordinate validation on the delete key.

• Problem of validation "Error Message.

  APEX 4.2 I have under 'Treatment of the Page '->' validation' my valdidation rule created with the name "10 validate the report.
  
  My APEX Validation attributes are:
  Type = "return of the boolean function.
  Validation expression 1 = "return rpt_utl_pkg.validate (" my_db_pkg.validate (: p1: p2,: p3: p4,: p5)'");"
  «* (Required value) Error Message "="Error in data".»
  
  Attribute 'when the key "=" SAVE', races of validation when I click on the button SAVE, and the validation logic is inside a plsql function where to start with this code business mistakes:
  

  apex_error.add_error (
          p_message          => 'Message 1',
          p_display_location => apex_error.c_inline_in_notification );
  
  apex_error.add_error (
          p_message          => 'Message 2',
          p_display_location => apex_error.c_inline_in_notification );
  ....

  My plsql function throw successfully these messages of 2 error and those are put in the page header.
  But the problem is that, too, formula "Error in the data" is didsplayed as a 3rd message.
  
  How can I do so that the 3rd message 'Error in data' would not appear?
  I want only the report to display messages:
  
  Message 1
  Message 2
  
  I can't leave the field "* (required value) Error Message" vacuum. And if I put a space character, then it prints but also the 3 rows without text, but still 3rd row from ball symbol is there.

  Charles Roos

  CharlesRoos wrote:
  APEX 4.2 I have being "Processing of Page"--> "Postings" my valdidation rule created with the name "10 validate the report.

  My APEX Validation attributes are:
  Type = "return of the boolean function.
  Validation expression 1 = "return rpt_utl_pkg.validate (" my_db_pkg.validate (: p1: p2,: p3: p4,: p5)'");"
  «* (Required value) Error Message "="Error in data".»

  Instead of return false when there is a validation that turned bad in your function always return true.
  Or in other words, validation that contains the apex_error.add_error functions should always return true.
  This is because as the posting it itself will do an apex_error.add_error when it breaks down that adds unwanted commit message.

  Nicolette