FRM-92150: WEB Client Version too new.

Similar Questions

• Language issue VSphere Web Client Version 5.1.0

  Hi all

  How can I change the VSphere Client Web Version 5.1 to the United States English version without completely re - install? I also have a French Windows XP with IE in French. My hosts are English American and I did not have this problem of language with the VmWare Vsphere Client (it is in US English)

  Thank you

  Concerning

  Bernard

  Hi bernardP,

  To display the web client in a localized language:

  Add the location parameter to the URL used to access the web client:

  • The default URL for the vSphere Web Client is:

    https://client-hostname:9443/vsphere-client

  • To specify a language, add:
    • English:/?locale=en_US
    • German:/?locale=de_DE
    • French:/?locale=fr_FR
    • Japanese:/?locale=ja_JP
    • Korean:/?locale=ko_KR
    • Chinese:/?locale=zh_CN
  • For example

    https://client-hostname:9443/vsphere-client/?locale=en_US

• Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

  We were a vSphere 5.0 shop for many years and enjoyed the client c# 4.0, 4.1 and 5.0 then days.  We just upgraded 6.0 Update 2 this week and although always, we are primarally used to the c# client and will use it for a while to come, I am getting used to the web client for the new features that are available only in it, such as SRM and VR.

  I was able to click through the numours of screens of reminder to get via Firefox after all these certificate warnings and even easier just click the one or two things in Chrome or IE to get in.  But how could eliminate total certificate errors?  Example, now I'm with Chrome, but the https:// in the address bar is red with a slash through it.

  In most all other device based on web or connection we have, as HP iLO, Dell iDrac etc... usually, we create a CSR on this device and it present our internal Windows certificate authority and recover a file to go back to the device.  Is it possible to do this with the web client?  We have a certificate of 'Server Web 2' model that generates the sha256 return certificate and inherently all field devices to trust him because the area is important our root certificate authority.

  Also, we are running services such as replication vSphere and SRM, I would not change certificate affects only or same vSphere Update Manager.  We have two sites HQ and DR.

  I ended up getting rid of the cert errors by following this page: 6 replacement vSphere SSL certificate / implementation by using the Certificate Manager-automation tool

  I followed the procedures for "Certificate of Machine (Reverse HTTP Proxy) replace with certificate custom" and just that.  I didin 't' t mess with root VMCA with custom signature certificate certificate because its seems to me like he wanted to do an endless number of the signature of the certificate request and keys.  But the first option considered for our internal Windows CA took care of her.

  For replication of vSphere 6.1.1 that I had to turn off the virtual devices from replication via customer web vSphere vSphere and then put them back on.  Then connect to their URL of web management (port 5490) and make the reconnection to the vsphere on the connection tab, where he was invited to accept the new certificate.

  For AUVS I had to run the VMwareUpdateManagerUtility.exe under C:\Program Files (x 86) \VMware\Infrastructure\Update Manager and to the third option of re - register to vCenter, and then restart the service.

  Surprisingly, SRM sites remained paired although I've read that some people have trouble with it.  I'm on 6.0 update 2 and I think one of the questions was fixed in 6.0 Update 1 b.

• Cannot use Chrome to connect to the web client vcenter after update.

  vCenter Web Client Version 5.1.0 build 1115182

  Customer integration Plugin VMRC version 5.1.0 build 1060398

  Customer support version 5.1.0 build 832030

  Flash Player WIN 11,8,800,94

  Browser Google Chrome Version 29.0.1547.66 m

  After all components of vCenter update I am more able to use Chrome to access vCenter Web Client.  When the connection page opens, I get the following error:

  Connection error: could not connect to vSphere Web Client. Contact your administrator to resolve this problem.

  If I try to connect, I get this error:

  Provided credentials are not valid.

  Everything works fine if I use IE 10.  Someone at - it see this before and knows how to solve?

  Thank you

  Mux

  It is fixed.  I had 'Block third-party cookies' checked.  After unchecking it connected perfectly.

  Mux

• VCenter 5.5 new install - VCenter not no projection in the Web Client

  Hello

  Today, I installed a new simple installation of 5.5 VCenter Server with all the parts.  I can access the web client very well and it will also authenticate with SSO (even if I don't allow my username anywhere, maybe I'm a domain administrator it allows this?).  Anyway I digress, when registering in the web client VCenter County shows 0 and I am obviously unable to perform all tasks at all.

  Of course, my link between the VCenter server and Webclient went wrong somewhere and I am struggling to see how to solve this problem.  From my research in 5.5 that it should automatically just connect and you don't need to 'register' that we had to do with older versions.

  Any help appreciated.

  Thank you

  Paul

  Hello

  As described in this KB KB VMware: vSphere installation 5.5 Web Client on a Microsoft Windows platform

  Among the vSphere post installation steps Web Client adds SSO identity Source

  Log in to the Web Client vSphere and authenticate using the [email protected] domain to check that the SSO and vSphere Client Web work correctly.

  You can also add an external identity source, such as Open LDAP and Active Directory before deploying the server vCenter Server and inventory Services.

  For more information on the different types of Sources of identity for vSphere 5.5, see him add a vCenter Single Sign-On identity Source section of the Guide of installation and Installation of vSphere.

  
  

  You connect by using the domain ([email protected]) account?

  Have you tried to connect with username [email protected]?

  According to the guidelines of vSphere vSphere 5.5 Documentation Center Documentation

  When an identity source is added, all users can be authenticated but have access no. authorization.

  If you open a session by using the domain account (domain administrators) you might be able to connect, but cannot perform all the tasks that the user is to have access permissions.

  Then you can try to login with the username [email protected] first, then assign permission to your domain account.

  The steps to add the UNIQUE identity Source Authentication (if the ad has not been added) and assign permissions (for the domain account) are described in vSphere Documentation here:

  vSphere 5.5 Documentation - add a vCenter Single Sign-On identity Source

  VSphere 5.5 Documentation Centre - assign permissions in the Web Client vSphere

• My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

  My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

  It is a catalog that you created on your computer, or coming from another computer?

  If it is one that has been created on your computer, you can search your computer to see if you have two different versions of Lightroom installed. If so, then you want to open the new version of Lightroom by double-clicking its icon, and then you should be able to open the catalog.

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• Windows 7 client version is closing my old game during the game titles

  Windows 7 client version runs some other very well on what games it closes.  I have older games title but some work very well, others do not work.  I had problems with windows doesn't recognize not the disk in the driver (Stronghold 2), I had the game for closing right after the introduction (black and white), I got the game close after an hour of play (SimCity4), and I had absolutely no problem with the game for hours (Rome: Total War).  The screen flashes always black and when it appears it shows Windows is trying to find a solution to this problem.  It gives no option and then restart seems to do nothing at all because the problem persists.  Is this just a problem with the customer of output or is it just a simple matter of new software too old games.

  FYI: Windows xp worked fine with all these titles on the old computer, and now the new computer was built just so there is no problem with the hardware.

  tunksee,
  The XP VPC is only for Windows 7 full or professional edition.  It seems that some of them are older games and can just have problems with current running on a newer system.  You can check with the manufacturers of games to see if they have all the patches that will help the game race on Vista\Windows7.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virtual Storage Manager - can't change instant planning time interval with vSphere Web Client

  Hello

  I try to activate Virtual Storage Manager schedules-model for a data store using vSphere Web Client. Everything works fine, but I can't change the time interval of planning of the snapshot. He remains at 12:00 midnight to 12:00 midnight. I can't change it manually or by dragging the bar.

  I tried with IE9, IE11, newer Chrome browsers. And with Flash versions 15 and 13-. Same mistake.

  I've added the URL of Sites you trust with weaker security settings - no help.

  Y at - it a bug or something else I can try?

  I just talked to Dell support on my problem and this is apparently a known issue with local Europe\UK.  The similarity of our problems might be useful - workaround for me was to settle the Locale\Regional from my PC, where I'm doing it in the United States.  Not the time zone or other settings, to control panel, then "Region and language", then on the first tab, 'Format' box should be set to "English (United States).  Close browsers, start again and it worked for me.

  Might be worth a try if you're not already in US format. (mine was in the United Kingdom).

• The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  Hi all

  We currently use DRM Version 11.1.2.2.302 patch.

  We are facing the error when we open the web console below.

  The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  It used to work very well and we see that this web configuration file has been updated. I assume that there is a problem with Internet Information services.

  Any help would be greatly appreciated.

  Thank you

  VINET

  Hi all

  The Web configuration file has been modified by windows service and after restarting the server, new web configuration file has been created and we have web access console.

  VINET

• vRealize Orchestrator - cannot add to vSphere Web Client

  Hello

  I configured the device vRealize Orchestrator and added the vCenter Server to the server via the customer to vRO Orchestrator--> library and can successfully run workflows against objects in vCenter. Then vRO works.

  BUT

  The problem I have is that I can't seem to add the server vRO to vSphere Web Client. I do not see the plugin if and when I go to the Orchestrator plugin I see the vCenter Server in the "House of vCO' tab but"N/A"under"Managed by vCenter Orchestrator Server"." Under the "Lists" section it says "vCO servers: 0".» What Miss me?

  I tried to add the new server to vRO (device) by changing the vCenter object and enter the server IP new vRO. But "Test connection" fails every time.

  In addition, vCO has been installed with vCenter initially but never used and not yet used. But I don't think it would make a difference.

  I don't see the vCenter plugin tab in the left menu when connecting to vRO with the customer and com.vmware.vco isn't showing in /mob .

  Versions:

  vCenter: 5.5u2

  vRO: 6.0.3.0 build 3000579

  Thank you!

  Hello

  I'm a bit confused. It seems you are trying to use the two vCO 5.5.2 and vRO with VC 5.5.2 6.0.3, but plug-ins are different (they have different deployment mechanism, different extensions in MOB, etc.). I recommend you stick to the version of the vCO you got installed with VC - in this case, 5.5.2.

  Then, check the following:

  • Check that the vCO is configured with the SSO authentication, and it is the same instance used by VC/Web Client SSO
  • Check that this instance of vCenter is added as properly to vCO and there is an extension of 5.5.x - style into the CROWD. His name is com.vmware.orchestrator. [some-guid]
  • Check that the extension of the server property contains a record with URL property pointing to the server fine vCO - https:[vco-ip]:8281
  • Make sure that the user you are using to connect to the Web Client has a permission; for example. You should be able to connect to vCO Client Java with this user

  If the foregoing is valid, check the Web Client (vsphere_client_virgo.log) log file for any errors of loading of the vCO and connection at the vRO server plugin.

• NetApp VSC v6.1 UI is missing from the Web Client v6.0u1

  I recently updated my vCenter Server 5.5 to v6.0u1 (2k12r2 for Windows with backend SLQ 2012). With that I installed a fresh instance of Virtual Console storage NetApp v6.1. All was working perfectly until I've restarted the vCenter after about 2 weeks of operation of the new version. After you restart the gui NetApp VSC and features were missing completely on the web client. The plugin has always shown as active in the webclient service is, however, no GUI. Strangely when I try to disable the plugin from the web client, it refreshes and remains only set as active.

  In heavy client, the icon was always present, however with the new version (6.1), no functionality can be achieved through this and you are just re-directed toward the Web Client of VMware. Backups were still underway at the scheduled time, even if the plugin was not visible in the Web Client.

  I tried the following:

  The re-registration plugin

  -Stop webclient VC services, stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data). Mainly located in the folder of vSphere-Client-serenity

  -Departure VC web customer service

  -Re-enrollment VSC with VC

  All the re - install

  -Stop services of VC

  -Stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data)

  -Stop services VSC

  -Do a complete uninstall

  -Remove the VSC installation directory

  -Reboot server VSC to delete reg keys

  -Install the new copy of VSC 6.1

  Re-record with the VC Server

  The same question is observed. The plugin shows as being installed. The extension "com.netapp.nvpf.weblient" exists in the breast of the https://< vCenter > / mob. (see attached screenshot). The thick client still shows the plugin as permitted, as the web client. I still cannot see the interface user via the web client despite the plugin is installed and activated.

  Tear out my hair with it. Any help would be greatly appreciated.

  

  Guys,

  An update on this issue, it could be useful to resolve any other issues similar and research...

  After 4months our case eventually made its way to the development of the web client team in VMware. The problem has been identified as a corrupted file in vCenter which is responsible for organizing the status "enabled/disabled' plugins customer web. Difficulty as follows:

  "C:\ProgramData\VMware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity\ALL\client.package.states.

  The solution was: -.

  • Delete the file
  • Open customer vcentre, administration, plugins
  • Disable a random plugin (this forces the State file recreate)
  • Exit vcentre and then reopen
  • Plugins should now be visible
  • Customer goto plugins and re - turn that which has been previously disabled

  Good luck guys, it was a serious pain in the ass

• Local storage shows as inactive in the web client

  Hello

  So I have a strange problem. On two of my guests, local storage shows as inactive in vCenter. I can access it without problem and there seems to be problems, but it is a bit concerning to see the alert whenever I am connected.

  

  However, when I checked in the thick client this error is not there. It is only in the web client for a reason any. I tried to restart the management agents, update storage adapters, and a new analysis of storage, but it has not changed.

  No idea what can be the cause and if it's something to worry about?

  Thank you!

  Please reboot the host and see again in the Web Client.

  BTW, what version of vSpehre for your environment?

• Assessment of ESXi 6.0.0 does not web client

  Is it still possible? I downloaded 6.0.0 earlier today and I can't access the web client at all. I just get 404 errors in all browsers on client machines (Windows 7). A new version was apparently released today (07/07/15) marked 6.0.0b. I tried to download that but keep having refused - I am not allowed. I'll tell you what I like, and it is EXTREMELY frustrated with these ridiculous antics web site. When I register for the new version I am always presented with the download of the former. I don't have the time in my life for this nonsense. Hyper-V can be rosy just now...

  You need a vCenter installed to use the web client

  Web client can connect to the vCenter only

  vSphere client can connect to the host or vCenter

• "VerifyError: Error #1053: illegal override of CustomProxy...". ', for the plugin in Web Client 6.0

  I'm having a problem with a plugin developed for 5.1. Works very well with the two web client 5.1 and 5.5.

  I'm trying to deploy the same plug-in in the web client 6.0 and follows with the reference of this binding changes for compatibility:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  -Change Web-ContextPath, vsphere client /-name of the plugin in the MANIFEST. MF

  -Configured by default two channels, one amf and secure-amf services - config.xml and remote - config.xml.:

  After these changes, I was able to resolve the "cannot load resources... '. "errors. And I am able to see my plugin icon.

  
  

  I made changes to my own proxy class (CustomProxy) to use ServiceUtil.getDefaultChannelUri (). I added the ServiceUtil code to my plugin rather the upgrade of an SDK 5.1 to SDK 5.5.2.

  Now get an error message when you click the icon of the plugin:

  "VerifyError: Error #1053: illegal override of CustomProxy...". ». Please find the screenshot of the flash error attached drive.

  Could someone guide possible cause and resolution of the issue?

  
  

  Thank you.

  Now I realize the you will not be able to compile it:

  public void callService(methodName:String,_arguments:Array,_callback:Function_=_null,_callContext:Object_=_null,_ _opId:String_=_null_):void {}

  It turns out that BaseProxy backward compatibility is broken If we substitute the callService method . We'll resolve this in the next version of hotfix or update.

  I can you advice how to solve this problem for your plugin. And it will work with 6.0. But after that we released the patch, your code will break. The only thing you can do at this stage is to remove from your CustombaseProxy.

  So I recommend the following:

  1 extract the logic that you have about the utility class, for example ProxyArgumentsUtil

  I don't understand why keep you the reference to m_reqMetaData and not to create a new instance for each request.

  If you do this, you can have a simple util class with a single static method in it. If you need this reference, then your utility class should be instantiated.

  2. all the classes that extend CustomBaseProxy should extend directly the BaseProxy

  3. whenever you call callService, use this ProxyArgumentsUtil to manage your "arguments" parameter

  4. remove the CustomBaseProxy

  Apologize for the inconvenience.