Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

Similar Questions

• VCenter 5.5 new install - VCenter not no projection in the Web Client

  Hello

  Today, I installed a new simple installation of 5.5 VCenter Server with all the parts.  I can access the web client very well and it will also authenticate with SSO (even if I don't allow my username anywhere, maybe I'm a domain administrator it allows this?).  Anyway I digress, when registering in the web client VCenter County shows 0 and I am obviously unable to perform all tasks at all.

  Of course, my link between the VCenter server and Webclient went wrong somewhere and I am struggling to see how to solve this problem.  From my research in 5.5 that it should automatically just connect and you don't need to 'register' that we had to do with older versions.

  Any help appreciated.

  Thank you

  Paul

  Hello

  As described in this KB KB VMware: vSphere installation 5.5 Web Client on a Microsoft Windows platform

  Among the vSphere post installation steps Web Client adds SSO identity Source

  Log in to the Web Client vSphere and authenticate using the [email protected] domain to check that the SSO and vSphere Client Web work correctly.

  You can also add an external identity source, such as Open LDAP and Active Directory before deploying the server vCenter Server and inventory Services.

  For more information on the different types of Sources of identity for vSphere 5.5, see him add a vCenter Single Sign-On identity Source section of the Guide of installation and Installation of vSphere.

  
  

  You connect by using the domain ([email protected]) account?

  Have you tried to connect with username [email protected]?

  According to the guidelines of vSphere vSphere 5.5 Documentation Center Documentation

  When an identity source is added, all users can be authenticated but have access no. authorization.

  If you open a session by using the domain account (domain administrators) you might be able to connect, but cannot perform all the tasks that the user is to have access permissions.

  Then you can try to login with the username [email protected] first, then assign permission to your domain account.

  The steps to add the UNIQUE identity Source Authentication (if the ad has not been added) and assign permissions (for the domain account) are described in vSphere Documentation here:

  vSphere 5.5 Documentation - add a vCenter Single Sign-On identity Source

  VSphere 5.5 Documentation Centre - assign permissions in the Web Client vSphere

• Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.

  I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:

  vSphere Client could not connect to "vCenter_Server_IP_Address".
  A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))

  I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".

  There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi

  Any ideas what could have happened and how to fix it?

  observe the following error in the logs.

  2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a

  Follow this article to fix the problem.

  http://alexjs.EU/VMware-ESX-and-a-full-SQL-Server-database/

• vCenter 5.5 sso works with web client but not for vsphere client

  Hello

  Just upgraded my vcenter from 5.0 to 5.5. In 5.0, I could connect to the vSphere client, using my creds of windows session, but now I can't and have to use the local account that is a member of the Administrators group local machine or [email protected]. However, it works very well with the web client.

  The Source of the identity seems to be correctly set. Have searched for a solution for four days. I'm at my wits end... :-(

  You may need to assign permission to your vCenter, refer to step #6: Back To Basics: vCenter post-configuration 5.5 installation (Web Client). VMware SMB - VMware Articles blog

• inventory of missing vCenter using the web client?

  I just upgraded my environment to 5.1 and for some reason, one of my vCenter servers shows no inventory by using the web client. I double checked the permissions on both sites and have checked the inventory in the vSphere client and everything seems good. I have two related modes and the other shows, everything is fine. I tried repointing and re-application as in accordance with article (KB VMware: repointing and re-application VMware vCenter Server 5.1.x and components) but all exits show as being already recorded. Any ideas?

  

  Thank you.

  This is the expected behavior for the operation of the Service of the inventory.

  Searches in the vSphere Client works perfectly?

  Take a look at the following kb NOT to DO ALL THE STEPS IN THERE!

  http://KB.VMware.com/kb/2033620

  Only follow re-register vCenter Server with the Service of inventory for now, if the search in vSphere Client function does not work correctly.

  
  

• How is the web client vCenter/SSO

  In vSphere 5.1, when I type https://myhost.mycompany.com:9443 / vsphere client / in my browser, I immediately get a login screen. When I enter my credentials, all work great. I guess that in this example, the backend of the web client is listening on port 9443.

  -Customer web backend expects SSO to always be running on the same host as himself. I mean, it is possible to have a scenario where the backend of the web client is running on a different host than vCenter or SSO.

  -If at the time of installation, we have configured the SSO to listen to one port other than the default, do I have to configure the client web backend as well, or is it also get reconfigured.

  Thank you.

  Yes, you can install SSO separately from other components of vCenter: see http://pubs.vmware.com/vsphere-51/topic/com.vmware.vsphere.install.doc/GUID-595E62F1-4D32-4A09-81F4-BE59B9217A51.html

  When you separate facilities you must install first SSO. When you subsequently install the WebClient service you must point to the SSO service by providing the URL of the SSO service. SSO listening on the 7444 default https port. If you have configured it differently (I don't know if this is possible) then you just need to change the port number in the URL of SSO.

  The WebClient service is listening on port 9443 default. See http://pubs.vmware.com/vsphere-51/topic/com.vmware.vsphere.install.doc/GUID-74AA3EF1-BDF3-4752-89DB-A522CDE30A66_copy.html

  -Andreas

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• vSphere SSL for the Web Client (device vCenter) certificate error

  Hello

  I installed ESXi 5.5 and right once I deployed the device vCenter. After the configuration and a few reboots, I navigates to the web client, and I get this error when I try to logon:

  "Based on the current configuration, the authentication server's SSL certificate was not reliable."

  I have until this google everything on the subject and outside tutorials on how to change certificates in the Windows version of vCenter, nothing on the device of vCenter. I was happy when I found the 'Certificate regeneration enabled' checkbox, but that did not help either. I can test successfully SSO settings in the control panel of vCenter.

  Everyone please?

  
  

  Edit: I should also mention that I am not able to connect to vCenter with the vSphere client. I get the "Cannot complete the connection by incorrect username or password". I use [email protected] as user name.

  Have you tried that? VMware KB: Troubleshooting the vCenter Server Appliance with Single Sign-On login

• I have just reactivated Dreamweaver on a new computer.  How can I get the files FROM my website ON my computer so I can edit/update using Dreamweaver.

  I have just reactivated Dreamweaver on a new computer.  How can I get the files FROM my website ON my computer so I can edit/update using Dreamweaver?

  If your old machine still works, export your definition of original site to a portable player, copy in your new machine and then import the site definition to the new machine. The definition file will have the extension .ste

  Create an empty folder on your new machine.

  Define a 'new' web site on your new machine to point to the new local root folder.

  Log your server and download all of the subfolders and files in the folder root from the server to the new local root folder.

• No showing in the Web Client vCenter Server

  ESXi 5.1.0 1117900

  vCenter Server 5.1.0 1123961

  With help, I solved just a problem connecting to vCenter Web Client with admin@system-domain .  Once successfully connected to vCenter Web Client I found that is show no vCenter Server.  If I connect using Windows authentication a vCenter Server appears in the inventory and I can configure everything without any problems.  However, exploitation forest admin@system-domain shows no vCenter Server and I tried to register using the register - is.bat and still no vCenter Server appears in the inventory.  Someone has seen this before and can offer a solution?

  stmux

  It is design related to this

  VMware vSphere 5.1

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• When I installed the web client vsphere using vcenter server iso, encounted an error that the vcenter server signon administrateu use name and password is invalid

  VCenter server is version 5.1 and this server is a member of the working group.

  It comes to my administrator:

  

  So, I used ISO server vcenter and installed web client pulg-in vsphere, it prompted:

  I've used many ways, but failed.

  usernme:admin@system-domain,

  so, I do not know how to solve, and I only know this administrator password.

  I'm not vCenter sign the only to have another admin, please help.

  

  and another question: how install and configure the data via the vsphere 5.1 customer protection, vsphere isn't vsphere web client.

  You must provide credentials for the user admin@system-domain.

• I have grown just from FCP to Premiere and played around, how to bring back the default workspace?

  Hello

  I just started on first from FCP and can't seem to get the workspace to the original default settings

  Probably something very stupid but can someone help

  Peter

  Not at all. Learn how Adobe is as memorization of the strings of random numbers.

  In the drop-down menu at the top of your scree, I think it's window reset workspace.  Halfway.

• Cannot use Chrome to connect to the web client vcenter after update.

  vCenter Web Client Version 5.1.0 build 1115182

  Customer integration Plugin VMRC version 5.1.0 build 1060398

  Customer support version 5.1.0 build 832030

  Flash Player WIN 11,8,800,94

  Browser Google Chrome Version 29.0.1547.66 m

  After all components of vCenter update I am more able to use Chrome to access vCenter Web Client.  When the connection page opens, I get the following error:

  Connection error: could not connect to vSphere Web Client. Contact your administrator to resolve this problem.

  If I try to connect, I get this error:

  Provided credentials are not valid.

  Everything works fine if I use IE 10.  Someone at - it see this before and knows how to solve?

  Thank you

  Mux

  It is fixed.  I had 'Block third-party cookies' checked.  After unchecking it connected perfectly.

  Mux

• I just got a new Windows 7 computer. How I completely restart the entire computer and lose all files, applications, etc., that never came with the computer first?

  * Original title: restart the computer

  I just got a new Windows 7 computer, and it has many applications in this shift makes the apps that I really need. How can I completely restart the computer world and lose all files, applications, etc., that came with the computer first

  If these are apps you added and want more, you can use the functionality of your computer factory restore. Unfortunately, this erases the disk and leave you with a double précis of his State when you turned on for the first time.  Then, you would have to do all the updates of Windows and then install all the programs you want.

  Otherwise, use programs uninstaller (from Control Panel) for each application that you do NOT want to uninstall.