From a device at the start of the host

Similar Questions

• How to remove an application from a device with the Profile Manager?

  I use iOS devices 9.1 in collaboration with Apple Configurator 2.1 and 5.0.15 Profile Manager. Configurator locks iPads and the Profile Manager is used for the distribution of applications. We are assigning apps in device that is a great feature. However, when I delete an application from a device with the Profile Manager, the application does not remove himself. The Profile Manager back the license and I can redistribute app for iPad one another even if the application is still installed and usable on the iPad first.

  Is this a bug? It seems that it should remove the app. If I delete the management profile in distance from the unit, it removes apps.

  Click on the gear box and then delete Apps and select the application you want to remove.

  Initially, I did what you did probably has been to select the name of the application, then press the 'less', who pulled out of the app in the list, but it has not removed the iPad, he just removed their license.  Through the gearbox and to remove it it removes of the iPad.

  You may have already thought of it, but I found this post unanswered after two months, and once I found the answer, I thought I'd put it here.

• Impossible to connect from my VIC to the host using the host name.

  Hi guys,.

  When I try to log in from my VIC to the host, I get this message (see photo) but if I use the work just the IP address. I check my DNS and host VMware was not there so I created a PTR record that connects the IP with hostname, I update the DNS, but still nothing happens. Any idea?

  Thank you.

  I was almost positive it is a dns issue...

  You can test the host name of the workstation that you are trying to connect from? try clearing your cache dns on the local workstation-

  > ipconfig/flushdns

  If for some reason that doenst work, and then add the host name of the node to your hosts file

  -

• mapping from a port on the host computer to a specific customer

  I have a windows host and a linux guest.  I want to map a port well known on the host through the linux prompt.   I searched the forum but couldn't find anything.  Is there a way to do this?

  I use vmware workstation version 10.0.1.

  d

  Take a look at the image below, it should be obvious.

  

• Adding components from one device to the other.

  Hi, is it possible to get out the processor in my xbox and put it in my laptop so he can become faster? and this will cause damages?

  No this is not possible.

• Appeal from a decision of the host

  If one or more hosts a decision - that the poster feel is incorrect or has the room for discussion - how do you engage them? Emails are usually sent from a non-response address

  Try here.

  < email published by host >

• How to enable the communication between the host and the virtual from Windows 7 computer

  Host: Mac OS X 10.6

  Setting of networking: NAT (also connected to the VPN work)

  VM: Windows 7

  I use my mac for my development. I have an application running with the Web Server server. I also use the hosts so that I can map the URLS of different web site with the same ip address.

  For example:

  On my Mac in/etc/hosts

  127.0.0.1 www.testsite1.com www.testsite2.com

  On my virtual from Windows machine in the hosts file

  987.78.125.125 www.testsite1.com www.testsite2.com

  When I'm at the office and using bridged connections, it works very well. However, I prefer to use NAT all the time.

  Is this possible?

  
  Thank you!

  I actually already answer your question but now I know the details, and by the way you have explained so much better the second time!

  When not connected to the VPN on the host computer and the guest knows the IP address of the Web server on the host (an appropriate entry in the guest hosts) then it should work but when connected to the VPN, if you are administrator does its job well, that you should not be able to connect the host to the guest for the reason mentioned previously...  Authenticated/no unapproved system (guest) cannot access an authenticated / trust system (host), while the VPN on the host computer is set up to your corporate network.

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• How read/view the image from SD card on the device

  Can someone please pass on a link that has a tutorial for the playback picture from sd card on the BB device. Thank you.

  Read the file into a byte array (let's call it data) using FileConnection (is there an example in the docs, enough to get you started), then call EncodedImage.createEncodedImage (data, 0, data.length) to create an EncodedImage.

  From there, you can do with this image you want - BitmapField.setImage (), graphics.drawImage (), etc.

• If you delete something in the cloud disappears from Apple device?

  f you delete something in the cloud disappears from Apple device?

  Generally Yes. ICloud orientation is to synchronize data between all your devices with any changes anywhere is synchronized automatically everywhere.

• no boot device during the start of mini mac and bootcamp after adding the partition

  My mac mini is running el capitan and after I added a partition I don't got no boot device but can start at el capitan after pressing option. However, I can't start boot camp. Thank you!

  Last login: kills Mar 31 17:33:01 on ttys000

  independenceadec1s-Mac-mini: ~ the independenceadec1 list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 256.1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Untitled Apple_HFS 1 GB 172.5 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 82.7 GB disk0s4

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 31.9 disk1

  1: disk1s1 Windows_FAT_32 NO NAME 31.9 GB

  independenceadec1s-Mac-mini: ~ independenceadec1$

  By adding a third partition you have damaged the boot loader. If you use Boot Camp to run Windows, so you cannot add a third partition. To set things straight, you will need to repartition the disk to a single partition and try again. A $20 alternative that might work for troubleshoot you is Paragon CampTune X.

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• I have no pointing device or the keyboard when I start Windows XP.

  Original title: no pointing device or the keyboard when I start windows XP How can I fix this or restore my computer to an hour early when it was working properly

  I have somehow deleted my system usb hub. I am running windows xp with a microsoft intellitype pro5.0 & intellipoint 5.0 but when I boot I have no mouse or keeybord how can I fix this or dine at an early hour when everything worked correctly? Can someone help me please your? I would be grateful and appreciate your help ending my thanks in advance.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  You can follow the steps of troubleshooting provided in the link below to solve the problems with USB devices in Windows XP.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Method 2:

  You can try the steps in the link below to restore the Windows XP computer to a previous state.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084