mapping from a port on the host computer to a specific customer

Similar Questions

• incomplete printing of letters, but only from the host computer

  I have a recurring problem with my print where the last line of each paragraph does not correctly print outs.  the bottom of the letters are cut off.  In addition, this problem occurs only on the host computer in our network.  and maybe when I use microsoft word, excel or publisher. (I print web pages properly) I did the following:

  1 printer checked drivers were updated and they are.

  2. ran a clean ink cartridge program, did not work.

  3. install new, both ink cartridges in black and color.

  4. selected 'best' for the quality of printing, this improves the problem but does not eliminate the problem.

  hardware information:

  printer hp officejet j5780 all-in-one

  host computer: dell desktop 2009 windows vista

  portable printer: notebook computer dell 2009 windows vista

  Sincerely, melody

  I have provided a link to documents from HP that can help solve the problem you're having with printing of cut.

  http://support.HP.com/us-en/document/c01671543

  There are also links in the above link which may help even further.

• Why will my router stops transmitting the internet signal after that I turned off the host computer?

  Hi members of the community.

  first of all, my setup:

  modem - router (wrt320n lynksis, yesterday I uplodaded latest firmware - it does not help)---(par câble), PC (windows 8)
  l
  l
  various devices (cable TV, wireless: laptop computer (windows XP), phones (Iphone, android, phone etc.))
  Second question:
  Until now, I had no problem with router, but as I connected the new PC, with windows 8 is installed, the router, I began to encounter the following problem: I turn the host computer (wired, PC with windows 8) off after a minute or two the router (if not always on) continues to transmit the internet signal with other devices (wired (TV) and other wireless).  What's also interesting is that, when I unplug the PC from the router ethernet cable (when the PC is turned off), the router begins to function normally. Why and how to fix it? It seems that the PC would stop the router in the transmission of the signal.
  I would apreciate any help I could get. Because the router is working otherwise fine (when the computer host is turned on when the PC is disconnected from the it), I guess it has something to do with the windows configuration.
  Thank you all,.
  Sincerelly, Janez

  Hi there... we have a different router, but I had exactly the thing happens to me when my husband bought his new computer. After hours of technical support that gave no results of our router manufacturer, I did some research on the web, a vast and I think I found the solution.

  Go to control panel > system and security > system > Device Manager > network adapters > find your network card (mine says in time real PCIe GBE) open cela, go to power management and uncheck the BOX allow the computer to turn off this device to save power.

  After that I did that my router is no longer turns off/goes to sleep when my computer is. Offshore.

  Give that a try, and if all goes well, it will help you too.

• Error message: «the virtual network on the host computer drivers are incompatible...» »

  Just bought a new computer that is running Windows Vista Ultimate 64-bit.

  I installed VMWare Workstation 6.5.1 build 126130.

  I copied on a machine virtual from the old computer (running Windows XP Pro and VMWare Workstation 5.0.0 build 13124). I improved this VM Workstation 6.5. This virtual machine is currently running Windows XP Pro.

  When I run the virtual machine on the new computer, I get the following error message:

  "The virtual network on the host computer drivers are incompatible with the installed application of VMWare. Version expected 5. Please reinstall the product. Virtual device Ethernet0 will start disconnected. »

  Note that the virtual machine runs; I don't have any network capacity.

  I read the thread http://communities.vmware.com/thread/186731, who seems to have the same problem. He had installed 6.5 on 5.5; When he uninstalled and deleted all of the directories, and then reinstalled everything went well.

  I don't have any product VMware existing on the computer that would cause this type of conflict.

  So, what should I try to fix this?

  Thank you

  Wayne

  If you want to install only vmnetadapter, open cmd as admin in vmware workstation dir and run;

  "rundll32 setupapi, InstallHinfSection VMnetAdapter1.Install 128% CD%\netadapter.inf"

  You can also repeat for vmnetadapter8.

  If it does not run as above

  "vnetlib - install devices.

  Joakim

• Unable to communicate with the host computer using the network University compactRIO

  Please move this topic to the appropriate section if it is not the right section. I can't locate a Council called the compactRIO. Thank you very much.

  I encounter this problem of network communication with my cRIO 9067. the linklocal or USB connection is fine but not static IP connection on the network. I contacted the it Department to assign me a static IP address for my MAC address of cRIO. In our University, they block only unknown MAC address access and the cRIO is in the whitelist. Here are the details

  cRIO attributed to IP address: 129.12.54.xxx, tried both netmask 255.255.255.0 and 255.255.0.0, no luck

  the host computer's static IP address: 129.12.50.xxx, subnet mask 255.255.255.0 (information of cmd - ipconfig)

  First question would be: they are on the same subnet? I need to make sure that even if scientists confirm that.

  Secondly, I followed https://www.ni.com/getting-started/set-up-hardware/compactrio/static-ip by using the IP address assigned, but not luck. I've noticed that I configure same address type cRIO static IPv4 using the USB connection or for local link mode, she went in DHCP mode or Local link once I unplug the USB and restart it.

  Whenever I restart MAX, connect the cRIO and my host to Ethernet jack on the wall, it shows the DHCP mode or link with assigned Local 129.12.54.xxx IP and the subnet mask 255.255.255.248. In addition, I am not able to change it in a drop-down list even after removing it and restart MAX indicated by tutorials OR.

  If you need more information, please let me know.

  Help, please!

  Jinyu

  Dear Mikko,

  I am pleased to tell you that the problem has been resolved. The cRIO works very well.

  The reason why it does not work is in first place because they are in the other subnet. For my school, my host is 12x.1x.54.130 and the IP assigned to my cRIO is 12x.1x.54.131. the subnet mask is 255.255.255.0 number marked in red must be the same for the cRIO is connected correctly.

  Kind regards

  Jinyu

• When the computer 'host' is accessible by the 'guest' on the network computer, the host computer crashes hard.

  There is no error message, making it difficult to diagnose. There are two computers running Vista, fully patched, connected via a network of small size. (Microsoft MSE, no virus, start using activated, etc. "It is clean). When the computer goes to * any * file of the host computer, the host computer crashes immediately. There is no error message, freezing of mice, all hard disk activity stops, it stops absolutely everything. The continuous guest PC works well, it simply notes that the host computer is "not available". Someone saw something like that? I certainly have not. It's far too vague to diagnose.

  I looked on the event logs and couldn't find anything saying. I disabled and re-enabled the network shares, etc. Because they are built Lenovo desktop computers, I have a difficult time to do a "repair", but I guess I could give that a shot with some Vista discs. As I understand it, these computers are not often with Vista bootable discs.

  It is essential that I can diagnose it. In almost twenty years of THIS I've never seen anything this vague and almost impossible to diagnose.

  Any help or advice would be greatly appreciated. Is it all the same to make a "full reset" or "Refresh" of networking in Vista? Who could do.

  I also note that it is a recent issue, these systems worked very well for a while and it's a change suddenly. Particularly curious because I locked the Windows updates to update only when I say so... and I didn't have lately.

  Have you tried to replace the NETWORK card on the computer that crashes? If not, it's what I would do then. MS - MVP - Elephant Boy computers - don't panic!

• error "could not complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  Hola y buenos dias, he puesto 2 hots directly in una DMZ y al activar el error HA da este:

  "Unable to complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  ESTOS son gemelos servidores y poner esta durante 2 Años last config antes han estado dentro infraestructuras en a cluster con otros 4 running perfectly. Ante nueva situation that met responsible security perimeter solo our esta posibilidad por lo as procedimos dio el a preparar los hots ante the nueva config enchufamos estos y an el swhitch of the demilitarized zone.

  Según me ha EDI el responsible of security perimeter, todo el trafico desde estos 2 hots hasta el esta allowed vCenter y asi mismo el cortafuegos responde al trafico ICMP a estos hots (este tema that he read in various Québec sites are important para el HA).

  Version of hots los Esxi 4.1.0 721871

  Me falta algo o tengo algo configurado evil?

  Important Algo a revisar?

  A greeting is gracias por adelantado

  Buenas

  Me designed that tendras 2 con 2 direcciones distintas vmkernel (lo del tema Las vlan y las tarjetas're menos ahora lo)

  Prueba has see the resolución desde el propio ESXi, prueba el uno a otro por both vmkernel ping, etc...

  A malas, saca ambos nodos del cluster y vuelve a unirlos con desactivado, cuando tengas los 2 HA, activa HA of nuevo y con eso you can smear of dudas so por el tema del VC University y UN vicio en BBDD.

  If todo esto falla, have as plantearte touch en el aam, are fairly complejo y peligroso if no to sabe hacer correctamente.

• "HA agent on the host computer was arrested.

  After quick vMotioning a number of virtual machines on an esx host I get an error on this host that "HA agent on [host] in cluster [NOMCLUSTER] in [datacentername] has an error: HA agent on the host computer was arrested" this could be the cause?

  Thank you

  "reconfigure for ha" is not impact on any virtual machine running or he kickoff an HA event, but you work with just the HA agent, that's all.

• Binds a guest operating system to one of the two network adapters on the host computer?

  Sorry if the topic is confusing.  I have a host operating system to Server 2008 running on a server that has two network jacks.  Allows to call an (192.168.10.24) and B (192.168.10.25).

  My guest operating system is set to bridged with the IP 192.168.10.26 mode

  I want to say VMWare to always use A NIC when it comes with this guest operating system.  Is this possible?

  In my (Control Panel Windows) network connections, I see my two NICs A and B as well as VMWare Network Adapter WMnet1 and VMnet8.

  Thank you!

  Run the utility for configuring the network (vmnetcfg.exe) as an administrator on the host computer, disable the automatic bypass, set vmnet0 to one of your physical network cards and a virtual NETWORK adapter not used, such as VMnet2, and then assign the other physical NIC. Then to your comments, change its settings and select vmnet0 or vmnet2.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Impossible to connect from my VIC to the host using the host name.

  Hi guys,.

  When I try to log in from my VIC to the host, I get this message (see photo) but if I use the work just the IP address. I check my DNS and host VMware was not there so I created a PTR record that connects the IP with hostname, I update the DNS, but still nothing happens. Any idea?

  Thank you.

  I was almost positive it is a dns issue...

  You can test the host name of the workstation that you are trying to connect from? try clearing your cache dns on the local workstation-

  > ipconfig/flushdns

  If for some reason that doenst work, and then add the host name of the node to your hosts file

  -

• How to isolate the network from the host computer

  I intend to use my VM Workstation to access the 'dubious' sites to avoid to pollute my host computer.  Could someone let me know what kind of (network) settings do I need to do on my VMWare workstation to ensure that there is no way that malicious software can get her on my host computer please?

  Thank you very much.

  Hi Pinkbull,

  Welcome to the forums.

  As long as you do not Exchange files between the host and guest OSs, how the network is configured is not really important. If you want to completely separate your VMS, best solution is to have two physical ports on your computer, set the host to one OS and devote the second port of the virtual machine.

  Good luck.

  Concerning

  Franck

• Can workstation make me use the ethernet port on the remote computer?

  Ideal solution would be:

  I have specialized software on my computer I want to use without installing it on the remote computer.

  For now, I have to because the software uses the ethernet computer port to do a job, the software is used to.
  

  
  

  (1) is there a solution out there for everything just to connect to a remote computer and make use of its ethernet port remotely?
  

  
  

  Someone told me that VMWare Workstation last night. Maybe it's completely off-base.

  
  

  If this remote computer is connected to another computer via an Ethernet cable, but not for the internet, only data.

  For me to be able to connect to it, the remote computer must maintain a simultaneous Wifi connection as well.
  

  I use Teamviewer to fight against it.

  
  

  (2) if 1) above is not possible, I'm back to my current setup which is to the software me, I need on that remote computer. But my problem is that it does not seem possible to have WiFi and Ethernet connections at the same time.

  Please correct me / explain how if I'm wrong.

  How can be useful to me in these scenarios Workstation?

  Thanks in advance for your help. I'm looking everywhere for more than a week.

  I read that you wrote in your OP several times and no offense not expected however it is not well presented and I find I have to ask the many requests for clarification, however, I will say this...  A Virtual Machine is presented only a wired Ethernet adapter no matter how the host connects to the LAN/WAN and if you need to wired Ethernet and WiFi Ethernet in the Virtual Machine, and then in addition to the default wired Ethernet you can also provide your own card Ethernet Wi - Fi USB to connect to the virtual machine as well as the two available to the virtual machine at the same time.

  Others while I won't waste time asking a bunch of questions and if you want to take an another stab as describing in explicit and specific in detail what you have and are trying to accomplish, then I add more to the discussion.

• Dedicated network adapter to the virtual machine and the host computer not let can visit his profile

  OK, here's my question, I know how to give themselves a phyiscal nic to a vmware, but I wanted to take it one step further and do not leave the host send or receive data from this network card, only the virtual machine can use this network/NIC...

  Here's my reasoning, I have to network conections, one is for my internal/field network and the second is a direct connection to the internet (Comcast) I don't want to use to separate the machines have for internet connection, I want to be on the same machine phyiscal and have just the vmware machine talking to comcast... is it possible?  I am running VMware workstation 7, last update.

  Thank you

  Cdrshm

  I assume you are using a Windows host?

  If Yes...

  -first set up networking networking with vmnetcfg.exe

  -assign vmnet0 to the network card for the internal network

  -assign vmnet2 to the network card used for direct access to the internet

  -Right-click on the map network-icon in the systray and access the properties of the network adapter for vmnet2

  -Disable all other protocols and the Protocol of vmware_bridge for this network adapter

  result: a virtual machine that uses vmnet2 can directly access the internet and the host has no IP address for this network adapter - and therefore cannot use it.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Add data from serial Port in the indicator series front panel?

  Hello! Everyone,
  I'm new to LabVIEW but has prior programming experience.

  I have to develop a front for my camera and this is why I need LabVIEW, data comes from serial Port, so I started internet research / LabVIEW forums and found various tutorials by the help I am able to do the part Serial Communication, but has got stuck in one thing.

  Whenever data from serial Port, it gets displayed on the indicator chain but clears quickly, but I want some data comes it does not erase the old data and new data to add with the old data.

  I read the string concatenation will work in this case, but I am not able to use it.

  Please take a look at my VI attached to this mail.

  You must use a shift register to keep your story.

  

  I recommend you go to some of the tutorials available.  They will help you a lot to get off on a lot of things like that.

  Introduction of 3 hours
  Introduction of 6 hours
  Bases LabVEW
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki
  OR learning
  Getting started with products OR

• Why the host computer is unable to connect to the smart camera on the network?

  My smart camera of NOR-1772 was connected to our network and functioning as a target to a host computer.  The two are running VBAI 2011.  The camera has been moved to another location on the network and another computer is used as the host? The host is connected to the wireless network.  The camera works fine when connected directly to the back of the computer.  Thank you.

  Hi Joel,

  Yes, it makes sense.  I noticed a corellation when I am set up and where I lose the connection.

  Thank you.

  Rob