from compilation

When compiling my FPGA PCI 7811 card, I was stagnated status: start the compilation. I waited for an hour, but it do not move to the next step. I use fpga card first. Please suggest where I am doing wrong.

How long it takes to compile a siple program to a digital output high.

Is the freezing of the computer to the top or just the software OR? The only thing I can think is that your FPGA/LabVIEW program may be damaged.  You may need to uninstall a re - install the software.

Tags: NI Software

Similar Questions

  • output from compilation with the form of a table

    I would like to print a SupplierName for several call numbers and upstream paids instead of display vendoranme duplicate of each line. When I run the code below, the table format came out badly. I print the name of the seller once, the next line of the calling number must be installed under the header of the call number, but it goes again under the name of the seller.
    anyoen can help me correct this view of data?

    Expected results:
    NAME OF THE VENDOR. CALL # | PAID AMT
    --------------------------------------------------------------------------------------
    VERIZON WIRELES | CALLNO01 | $500.00
    ----------------------------------------------------------------------------------------
    empty space. CALLNO02 | $200 |
    -------------------------------------------------------------------------------------
    empty space. CALLNO03 | $50 |
    ------------------------------------------------------------------------------------
    empty space. CALLNO04 | $10 |
    ------------------------------------------------------------------------------------



    -results of the wrong exit code below-
    ------------------------------------------------------------------------------------------
    NAME OF THE VENDOR. CALL # | PAID AMT
    --------------------------------------------------------------------------------------
    VERIZON WIRELES | CALLNO01 | $500.00
    ----------------------------------------------------------------------------------------
    CALLNO02 | $200 |
    -------------------------------------------------------------------------------------
    CALLNO03 | $50 |
    ------------------------------------------------------------------------------------
    CALLNO04 | $10 |
    ------------------------------------------------------------------------------------

    -----------------code------------------------------------
    < tr align = "center" >
    < td width = "3%" > < b > NAME of the SELLER < /b > < table >
    < td width = "15%" > < b > CALL # < /B > < table >
    < td width = "21%" align = "right" > < b > AMT PAY < /b > < table >
    < /tr >
    < cfoutput group = "vendorname" >
    < tr align = "center" valign = "top" >
    < td align = "left" > #UCase (otrQry01.vendorfullname) # < table >
    < cfoutput >
    < td > #UCase (otrQry01.calllnumber) # < table >
    < td align = "right" > #DollarFormat (otrQry01.amountpaid) # < table >
    < /tr >
    < / cfoutput >
    < / cfoutput >

    k... help results.

    It's kludgy, but as Dan said, I can't think right now a better way.

  • Compilations no longer appear in Albums or playlists

    I think it might be the same issue that is discussed in iTunes not to display all the photos in the grid view (but it's iTunes for Mac - I replied by mistake I use Windows 10).

    Question: Is there a way to make material Compilation to appear in the Album view (s), the way that he used to work before the 12.4.0.119 version?

    After the upgrade to iTunes for Windows to 12.4.0.119, I no longer see compilations (or songs) in various points of view. For example: I imported a box as a compilation. The set consists of several different albums, and I would add the songs as such to a playlist (i.e., a value of an album material at a time). This material is displayed under library-> Albums, but it is no longer made.  (I know that I can click on the button 'Edit' next to 'Library' and add 'Compilations' - it's not what I'm talking about.) "I want to see Albums as I have before).

    I also some songs compilation added to a playlist - they are in fact always there, but they are not displayed when you view as albums.  If I change the display of the playlist to display as a playlist, not only I see the songs on the compilation, but the size increases (rightly) in GB. I prefer the view of the Album and do not look forward to change the view to see what I had in my playlist.  (I don't like albums compilations seem to when I listen to on my iPhone, but it is a different matter.)

    I tried to delete the songs from compilation of the playlist and then adding them again, but that did not help.

    I don't seem to be able to reproduce this problem. Maybe a screenshot to illustrate what you see?

    TT2

  • Find the source of the massive compilation errors

    Hi all

    I am trying to determine the source of the errors on a generation of RT and therefore a massive to remove compilation live broken and unused running the project is important enough, so the output from compilation of mass is large.  One thing I am struggling with trying to determine * why * an error.  For example, I get a few CompileFile: error 7, which indicates that something is looking for a file that does not exist.  How can I determine which leader is the search for the missing file?  I've attached the output from the massive compilation, but also a python file that I use to interpret the files to find errors.

    On another note about this file - what I'm doing with the release of Bad VI/Subvi?  It almost seems as if he is allowed to disregard this output.

    Any help is welcome. At soon cirrus

    (okay, that I'm lame but you are not allowed to attach python so here is the script below)

    FName = "mass_compile_log_10202016.txt."
    
with open (fname) as f:
    
    line = f.readline () .strip)
    
    I = 0 # track the error number
    
    j = 0 # track the line number
    
    # Only goes to find the first 30 records
    
    <>
    
        s = line [0:3]
    
        j += 1
    

    # Not interested in a failure to load, search or bad messages VI...
    
        otherwise (s == ' # ' or s == 'ISP' or s == 'Sea' or s == "(C:"):
    
            I += 1 # increment the error
    
            Print (STR (i) + "[" + str (j) + ' "].") + line)
    
        line = f.readline () .strip)
    
    f.Close)

    Thank you, udka.

    In fact, I came across the easy solution (although there is always only one instance dangling out there that I can't explain).  Simply

    1. Create a new project
    2. Add a snapshot of the file you want to compile mass

    If you lack the screws in the massive compilation, these will appear in the missing build dependencies and you can know who is dependent on them.

    About the wrong screw - it is difficult to know if this could be due to the fact that the compilation of mass occurs on local and he can't find the RT del VI (since it is not on the RT system).  Whatever it is, I'm building again to see if I have an exe works on the RT system (the reason why I was making the massive compilation has been a failure on the exe - not when you build, but when running).  I have attached my log of recent massive compilation for the comparison of what I started with.

  • Strange error with RHCL RH10 and RH11 command-line compilation

    Hello once again, RoboHelp gurus!

    I feel a strange error using the compilation process command-line rchl in RoboHelp 10 and 11 of RoboHelp.

    Here is the command I use:

    CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

    RhCl "C:\folder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\log\folder\logfile.txt".

    When I generate the log of the cmd file, I see an error "LILo: BIBCientInit could not initialize" twice in the window of cmd prompt while compiling is the treatment.  The cmd prompt window looks like this:


    C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl "C:\projectfolder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\logfolder\logfile.txt" [press ENTER]

    LILo: Could not initialize BIBCientInit

    LILo: Could not initialize BIBCientInit

    C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML >


    The created FichierJournal.txt has no mention of ""LILo: BIBCientInit could not initialize "it contains."  Compiling builds without problem, as far as I can tell.


    The same thing happens when I do not create the log during the cmd file and it errors record right "compensation output folder.  But, it seems to me that the output folder does not actually get disabled.


    This allows the viewing of the compilation process line by line in the cmd prompt window.  When the compiler indicates "output Compensation folder...". ', the ' LILo: BIBCientInit failed to initialize "error message appears twice, and then the process continues.

    Here's the command:

    CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

    RhCl 'C:\folder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder '.

    The cmd prompt window looks like this:


    C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl 'C:\projectfolder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder"[press ENTER]

    Adobe (R) RoboHelp version 10.0.0.287 Project command line compiler

    Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

    Project: C:\folder\project.xpj

    Page layout: SSL_Name.

    Output: c:\outputfolder.

    Scanning for the compilation project...

    Review completed.

    ATTENTION: No luggage description of the file.

    From compilation...

    HTMLHELP 10.0.0.287 preprocessor

    Compilation C:\folder\! chm_tmp_folder_0\project.xpj ...

    Preparation create HTMLHELP...

    Compensation output folder...

    LILo: Could not initialize BIBCientInit

    LILo: Could not initialize BIBCientInit

    Preparation of the HTML Help files...

    Copying files...

    ...

    It's okay if it's a HTMLHelp or WebHelp output.  Any thoughts on what is this error and what is the cause?

    I've been away from RoboHelp for about 9 months, but I'll be back on the same projects and the same version of RoboHelp 10 and the same compilation process.  The difference is that I have a new laptop.

    Thank you very much in advance for your time!

    EA

    Adobe was able to recreate this issue on their end, and a bug was created for her.

  • .chm does not compile

    I'm trying to compile a lengthy document with a large number of imported MS Word 2003 files. The view of the output gives me the following warning and does not complete the compilation:

    "HHC4001: warning:
    "The alias next line does not contain a" ="character separating the identifications: i '.

    FOSS_Spiral_1_Master_Document.HHK

    Fatal Error: Unexpected error from the Microsoft HTML compiler.
    Finished compiling HTMLHELP in 23 seconds"

    Please help me. I'm on a tight schedule.

    Here is the view of full power:

    From compilation...
    HTMLHELP preprocessor 7.00.145

    C:\Documents and Settings\ambacherge\My Documents\My Projects\FOSS S1 Master with can imported RoboHelp compilation! SSL! \FOSS_Spiral_1_Master_Document\! chm_tmp_folder_0\FOSS_Spiral_1_Master_Document .chm...

    Preparation create HTMLHELP...
    Compensation output folder...
    Preparation of the HTML Help files...
    Copying files...
    Updating files...
    Finish the preparation in 6 seconds

    Initializing the compiler...
    HTMLHELP (7.01.001).. generation.
    Updating of the topics...

    Update of Document_and_File_Viewer/_Discussion_Papers/An argument for role types.htm...
    Last updated 11-12 - 2008.htm of the Document_and_File_Viewer/_Meeting_Agendas_and_Notes/Architecture Conference Call...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/Architecture 110408.htm of meeting Notes...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/Architecture 111208.htm of meeting Notes...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/FIS Architecture 100108.htm of meeting Notes...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/FIS Architecture 100608.htm of meeting Notes...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/FIS Architecture 100708.htm of meeting Notes...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/FIS Architecture 100808.htm of meeting Notes...
    Updated Document_and_File_Viewer/_Meeting_Agendas_and_Notes/FIS Architecture 111808.htm of meeting Notes...
    Update of Document_and_File_Viewer, A_Project_Leadership, Business_Process_Definition_Effort, process goals.htm...
    Updated Document_and_File_Viewer/A_Project_Leadership/spiral 1 - PMP.htm...
    Update Document_and_File_Viewer/B_-_Technical_Architecture/B - Architecture.htm technical...
    Update Document_and_File_Viewer/C_-_User_Scenarios/suggested the scenario Syntax.htm...
    Update Document_and_File_Viewer/C_-_User_Scenarios/spiral 1 - user scenario 1 (revised) .htm.
    Update Document_and_File_Viewer/C_-_User_Scenarios/spiral 1 - user scenario 1...
    Update Document_and_File_Viewer/C_-_User_Scenarios/spiral 1 - user scenario 2.htm...
    Updating Portlet UI Requirements.htm Document_and_File_Viewer E_-_Portal CLI...
    Updated Document_and_File_Viewer/E_-_Portal/Portlets requirements.htm...
    Update Document_and_File_Viewer/F_-_Catalog/FOSS model metadata 111408.htm...
    Updated Document_and_File_Viewer/F_-_Catalog/FOSS-Cat 20081114 meeting Draft.htm...
    Updated Document_and_File_Viewer/F_-_Catalog/FOSS-Cat 20081119 meeting Draft.htm...
    Update Document_and_File_Viewer/F_-_Catalog/NMFS EDM data Categories.htm...
    Updating Document_and_File_Viewer/G_-_Hub/NOAA_FOSS_SRS-V1.0.htm...
    Update Document_and_File_Viewer/H_-_Adapter/H - Adapter.htm...
    Update Document_and_File_Viewer/I_-_Quality_Assurance/I - Assurance.htm of quality...
    Updating files Document.htm consolidated FREE software...
    Updated FOSS in spiral a Documents Title Page.htm...
    Updating Revision_History.htm...
    Updating Spiral_1_Consolidated_Documents_List.htm...




    C:\Documents and Settings\ambacherge\My Documents\My RoboHelp imported S1 Master with can Projects\FOSS! SSL! \FOSS_Spiral_1_Master_Document\! chm_tmp_folder_0\FOSS_Spiral_1_Master_Document .hhp
    Compiler Microsoft HTML Help 4.74.8702


    C:\Documents and Settings\ambacherge\My Documents\My Projects\FOSS S1 Master with can imported RoboHelp compilation! SSL!\FOSS_Spiral_1_Master_Document\FOSS_Spiral_1_Master_Document.chm


    HHC4001: caveat:
    "The alias next line does not contain a" ="character separating the identifications: i '.

    FOSS_Spiral_1_Master_Document.HHK

    Fatal Error: Unexpected error from the Microsoft HTML compiler.
    Finished compiling HTMLHELP in 23 seconds

    Compilation is complete.


    Thank you.

    Gambacher

    "C:\Documents and Settings\ambacherge\My Documents\My Projects\FOSS S1 Master with can imported RoboHelp compilation! SSL! \FOSS_Spiral_1_Master_Document\! chm_tmp_folder_0\FOSS_Spiral_1_Master_Document .chm '.

    Man, it's a path of output destination! Try to create a new folder "C:\FOSS" and another provision of HTML help that generates its output to 'C:\FOSS\S1_Master.chm '. You will experience probably less grief.

    Good luck
    Leon

  • Question of Simulator: white screen off center instead of application

    Hello

    I'm new on the BlackBerry community, the development of BlackBerry et al. Today, I downloaded the SDK to test the Tablet Simulator 0.9.2 but I already spent several hours trying to get something to run without success.

    The Simulator is installed without any apparent problems. I have read the forums today and I had none of the problems that others have mentioned, as a screen freezes or problems during startup.

    I use a trial version of VMWare Fusion 3.1.2 on Mac OS X 10.6.6.

    I don't have Adobe Flash Builder, so I use TextWrangler. I wrote an applescript script which, during the recording of my actionscript file, called a perl script (I know, sounds redundant, but it works) and fact the compilation for me as posted by Taylor Byrnes (amxmlc, blackberry-airpackager). I'm able to talk to the simulator that my output from compilation shows any errors (as far as I know), but my application appear in the Simulator without the icon that I have provided.

    When the application is started, all I get is a white screen off-center without content about it.

    I've also compiled the HelloWorld example provided. What I received was another app in the Simulator with the default icon that does exactly the same thing: a biased white screen. Whenever I have recompile a script with minor changes, the icons in the Simulator flash for a millisecond, and then I get the same off white screen.

    Someone knows something like that? Clues?

    There is obviously something I have to hurt. I can put my arguments to command-line and script if that helps. I tested my swf file in the Flash Player application and it shows. All what I have there is a red dwarf with a TextField on the top.

    Sorry for the comments and thanks for any help, you can provide.

    Daniel

    Are there spaces in folder names anywhere in the path to your project on your computer?  If so try to migrate your development to a folder that has no space in any folder named everywhere in its path.  Maybe it's not the cause of the problem, but in all cases, you should remove it as a possibility.  Windows users are discouraged to use the directory C:\Documents and Settings typical for Playbook dirs project.

    The other thing that went off to the top of some people using versions of command line is picky how the tools are.  In your command line, try using the - C option, and make sure it's between - package .bar and installApp -:

    I.e. instead of:

    blackberry-airpackager -package HelloWorld.bar -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]

    follow these steps:

    blackberry-airpackager -package HelloWorld.bar -C [YOUR PROJECT WORKING DIR} -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]

    The airpackager in the SDK 0.9.1 was picky about the order of the command line options.  I'm still not on 0.9.2 but see nothing in the notes to having fixed them thereon.

    Edit: Note; I've never had a center off white screen w/all of my command line compiling adventures, but before I got the mantra of the 'proper' command line, I got apps that showed a splash screen and then just went.  I'm on Windows (XP SP3), btw.

  • migration of multiple projects of bpel 10g composite single 11g.

    Hi all
    I'm about to migrate our projects of 10 GB BPEL to 11 g.
    I found that on 10g, we have several folders (around 15) for every BPEL process.
    each folder has its own .jpr file build.xml, his build properties file, subfolder containing BPEL *. The BPEL, *.wsdl *.xsd files file.

    I understand that on 11g a unique composite.xml is necessary.

    Could if it you please let me know if my interpretation below is correct about the migration process?

    1. each project must be migrated separately by opening the *.jpr on Jdeveloper and go through the migration wizard.
    2. assuming that all errors in step above are fixed, combine multiple projects in a composite only scripted ant as follows.
    Ant f ORACLE_HOME/bin/ant-sca-upgrade.xml
    -Dsource 'sourceDir1:sourceDir2 '.
    TargetDir - Dtarget
    App_name - DappName
    This will create a FILE of SAR.

    3 compile the app_name. SAR file using Ant-FCC - compiles .xml
    4 deploy the SAR using the Ant-sca - deploy.xml or weblogic console > transfers > install.

    Thank you

    1. each project must be migrated separately by opening the *.jpr on Jdeveloper and go through the migration wizard.

    Yes

    2. get files from compilation of 11G_Jdeveloper_Root\jdeveloper\bin

    Yes

    3. composite of soa using the package ant - sca - package.xml, this will create the file sar

    Yes, you can also create a file of sar with jdeveloper

    4. use ant - sca - deploy.xml to deploy the file on the server OR weblogic console sar > deployments > install.

    not from the weblogic console, it should be the em console.

    in step 3, when we package composite SOA, can we package several processes in a SAR or I need to create 15 different SARS?

    Deploy all the different process like 15 SARS.

    If multiple SAR is created in step 4, should I deploy them in a particular order?

    There is a process that depends on other processes to follow the order i.e. deploy first the charging process.

    Otherwise just deployed in any order

  • RH11: Error on generate a reactive result

    I created a presentation of the screen (Standard), recorded and he previewed successfully.

    I chose Responsive HTML5 as my main exit.

    However, when I click on the button generate main exit, I get;

    From compilation...
    Responsive HTML5 preprocessor 11.0.0.179

    Compensation output folder...
    Lack provisions of screen used in that provision a single source. Make sure that the required screen provisions are added to the project.


    Internal error occur, could not generate Responsive HTML5.
    Compilation is complete.

    What I am doing wrong?

    Thank you!

    Hello

    Open your single Source Layouts pod and double-click your main layout. At the bottom of the dialog box should be a zone of "manage layout". See if you can assign a page layout there.

    See you soon... Rick

  • Problem binding in visual express 2008

    Hello world!

    I connect problem in visual studio c ++ 2008 express. I do not understand because it is an example of a project and I have set up my VS to compile in 64...

    This is my journal built:

    Build log


    Rebuild started: Project: Resizer, Configuration: Debug|x64
    Order lines


    Creating temporary file "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\BAT00000751766092.bat" with contents
[
@echo off

cl /I "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\..\..\..\Headers" /EP ".."\\"ResizerPiPL.r" > "x64\Debug"\\"ResizerPiPL.rr"

"c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\..\..\..\Resources\PiPLTool" "x64\Debug\ResizerPiPL.rr" "x64\Debug\ResizerPiPL.rrc"

cl /D "MSWindows" /EP x64\Debug\ResizerPiPL.rrc >               "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\"\\"ResizerPiPL".rc



if errorlevel 1 goto VCReportError

goto VCEnd

:VCReportError

echo Project : error PRJ0019: A tool returned an error code from "Compiling the PiPL"

exit 1

:VCEnd
]
Creating command line """c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\BAT00000751766092.bat"""
Creating temporary file "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000851766092.rsp" with contents
[
/Od /I "..\..\..\Headers" /I "..\..\..\Headers\SP" /I "..\..\..\Headers\Win" /I "..\..\..\Resources" /I "..\..\..\Util" /D "MSWindows" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_VC80_UPGRADE=0x0710" /D "_WINDLL" /FD /EHsc /MDd /Zp4 /Fp".\Debug/Resizer.pch" /FAs /Fa".\Debug/" /Fo".\Debug/" /Fd".\Debug/" /FR"x64\Debug\\" /W2 /WX /c /Zi "..\..\..\Util\MissingSuiteError.cpp"
]
Creating command line "cl.exe @"c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000851766092.rsp" /nologo /errorReport:prompt"
Creating temporary file "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000951766092.rsp" with contents
[
/Od /I "..\..\..\Headers" /I "..\..\..\Headers\SP" /I "..\..\..\Headers\Win" /I "..\..\..\Resources" /I "..\..\..\Util" /D "MSWindows" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /FD /EHsc /MDd /Zp4 /Fp".\Debug/Resizer.pch" /FAs /Fa".\Debug/" /Fo".\Debug/" /Fd".\Debug/" /FR"x64\Debug\\" /W2 /WX /c /Zi "..\Resizer_Strings.cpp"

"..\Resizer.cpp"

"..\..\..\Util\AEGP_SuiteHandler.cpp"
]
Creating command line "cl.exe @"c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000951766092.rsp" /nologo /errorReport:prompt"
Creating command line "rc.exe /d "_DEBUG" /d "_VC80_UPGRADE=0x0710" /l 0x409 /fo"x64\Debug/ResizerPiPL.res" ".\ResizerPiPL.rc""
Creating temporary file "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\TMP00000A51766092.tmp" with contents
[
2 /* ISOLATIONAWARE_MANIFEST_RESOURCE_ID */ 24 /* RT_MANIFEST */ ".\\x64\\Debug\\Resizer.aex.embed.manifest"
]
Creating command line "rc.exe /fo".\x64\Debug\Resizer.aex.embed.manifest.res" "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\TMP00000A51766092.tmp""
Creating temporary file "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000B51766092.rsp" with contents
[
/OUT:"C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\Resizer.aex" /INCREMENTAL /DLL /MANIFEST /MANIFESTFILE:"x64\Debug\Resizer.aex.intermediate.manifest" /MANIFESTUAC:"level='asInvoker' uiAccess='false'" /DEBUG /PDB:".\Debug/Resizer.pdb" /SUBSYSTEM:WINDOWS /DYNAMICBASE:NO /IMPLIB:".\Debug/Resizer.lib" /MACHINE:X64 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib

".\x64\Debug\ResizerPiPL.res"

".\Debug\AEGP_SuiteHandler.obj"

".\Debug\MissingSuiteError.obj"

".\Debug\Resizer.obj"

".\Debug\Resizer_Strings.obj"

".\x64\Debug\Resizer.aex.embed.manifest.res"
]
Creating command line "link.exe @"c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000B51766092.rsp" /NOLOGO /ERRORREPORT:PROMPT"
Creating temporary file "c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000C51766092.rsp" with contents
[
/o "x64\Debug/Resizer.bsc"

".\x64\Debug\AEGP_SuiteHandler.sbr"

".\x64\Debug\MissingSuiteError.sbr"

".\x64\Debug\Resizer.sbr"

".\x64\Debug\Resizer_Strings.sbr"
]
Creating command line "bscmake.exe @"c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\RSP00000C51766092.rsp" /nologo"
    Output window


    Compiling the PiPL
Microsoft (R) C/C++ Optimizing Compiler Version 15.00.30729.01 for x64
Copyright (C) Microsoft Corporation.  All rights reserved.
ResizerPiPL.r
Microsoft (R) C/C++ Optimizing Compiler Version 15.00.30729.01 for x64
Copyright (C) Microsoft Corporation.  All rights reserved.
ResizerPiPL.rrc
Compiling...
MissingSuiteError.cpp
Compiling...
Resizer_Strings.cpp
Resizer.cpp
AEGP_SuiteHandler.cpp
Generating Code...
Compiling resources...
Microsoft (R) Windows (R) Resource Compiler Version 6.1.6723.1
Copyright (C) Microsoft Corporation.  All rights reserved.
Compiling manifest to resources...
Microsoft (R) Windows (R) Resource Compiler Version 6.1.6723.1
Copyright (C) Microsoft Corporation.  All rights reserved.
Linking...
LINK : cannot create map for .ILK file; linking nonincrementally
LINK : fatal error LNK1104: cannot open file 'C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\Resizer.aex'
Creating browse information file...
Microsoft Browse Information Maintenance Utility Version 9.00.30729
Copyright (C) Microsoft Corporation. All rights reserved.
    Results


    Build log was saved at "file://c:\Users\DamsCGWorkStation\Documents\Programmation\After Effect\CS55\Downloads\Adobe-After-Effects-CS6-Win-SDK\Adobe After Effects CS6 Win SDK\Examples\Effect\Resizer\Win\x64\Debug\BuildLog.htm"
Resizer - 1 error(s), 0 warning(s)

    Hi blenderiseur!

    Welcome to the forum. :-)

    Looks like you put your SDK files in an unconventional place.

    really irritates the resource compiler tool...

    I think the standard path should be:

    c:\Program files\adobe\after effects cs6 sdk...

    do not hold me to the letter. Look for it here in the forum. He has been treated before.

    (my machine is configured very differently, so I can't check)

    You can configure the custom build step to search this tool to another location, but it's a pain to do.

    Let me know if that solves your problem.

  • Failed to load plugins in the MediaCore folder

    My After Effects is installed in "E:\Adobe\After Effects CS6", so the MediaCore folder path is "E:\Adobe\Common\Plug-ins\CS6\MediaCore".

    I just started to learn the SDK yesterday. When I played with the examples provided in the SDK software, I put the output in the folder MediaCore folder, After Effects will not load plugins in this folder. I have to copy the plugins in the plugin folder in the folder of support After Effects files.

    If I set the output folder in the folder plugin for After Effects, After Effects can crash.

    What should I do?

    I use Windows 7 Ultimate 64-bit sp1, After Effects CS6 and Visual Studio 2010 Ultimate.

    Hi Zac,

    I installed my After Effects in 'E:\Adobe '. so, there is a file MideaCore in the directory "E", the path is "E:\Adobe\Common\Plug-ins\CS6\MediaCore\". When I said that I can't load the plugins in the folder 'MediaCore', I ment this folder.

    I downloaded first CS6 on the site yesterday and installed in the "E:\Adobe" folder, this time, a new MediaCore folder has been created in the 'C' directory, the path is "C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore". And I can load plugins in this folder. But if I uninstall first, this MediaCore folder no longer exists.

    So I guess it's problem.

    Subject of the accident, I was compiling the pulgin 'Paramarama '. But after I changed the output from compilation path to a different location, and then change it back, After Effects not crash more.

  • quick question on errors

    System.out.println (Cheese);

    the cheese, missing quotes is running error or syntax error? I use eclipse. then he immediately told me about the error. so I wonder whether or not it is runtime error. I thought it was a syntax error, but in this python book I read, he says that it is a runtime error. Who is this?

    just to confirm: syntax errors are as good grammar?

    the way I understood it, syntax error leaves not the program compile while semantics and execution errors do not let you compile.

    N ° syntax and static semantic errors occur when the compilation, so you cannot compile, so you cannot run. Runtime errors occur during execution and therefore only occur if you have compiled, which means no syntax or static semantic errors.

    so, now, I understand that semantic errors also will prevent you from compiling as if it is an undeclared variable?

    Fix.

    What about the runtime error? It allows you to compile right every time?

    This question doesn't even make sense. See above.

  • RoboHelp Word closes generation HTML Help after 2 MB of images

    Hi, I'm evaluating RoboHelp for Word 8 for my business. I use the trial version of RoboHelp for Word 8. Building the content of files hep in the Word document I insert images by using the Insert-> picture-> Word file menu. After that I inserted about 2 MB of images RoboHelp crashes when I run the RoboHelps file-> generate main Layout for MS HtmlHelp, in the menu. The compiler output crashes just essentially by the following:

    From compilation...

    Compensation output folder...

    From compilation...

    I found the image on the border of the size limit and delete it and am able to generate the output. I can also replace it with a much smaller image and can generate the output.

    This seems very strange to me, 2 MB is nothing. We mainly use a JPG image and two small GIFs. This could be just a problem with the trial version of RoboHelp 8 or maybe RoboHelp wants images inserted in Word in a different way?

    Thank you, I appreciate any information you can provide me.

    You missed my point. With RoboHelp HTML you do not have to import, you link and then create the CHM. The Word document can reside on the network and SMEs can change. When you build, RoboHelp prompts you to update the topics in the current version of the document.

    Thus, you always have your Word documents available for others to update and you still have your CHMS.

    Which version of Word you are using. In 2007, things RoboHelp seems to be in the Add-In Ribbon.

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • Model Active Script error: do not initialize the script.

    Hello

    Running RoboHelp HTML 2002 R2, Build 1150

    W2K3 MS

    When generating, we get the following error:

    ==============================================

    From compilation...
    WebHelp preprocessor 10.00.1150

    Compilation of D:\temp\ron\vfpapps9\WinCap\ROBOHELP\WinCapWH\WebHelp\WinCapWH.htm...

    Preparation create WebHelp...
    Compensation output folder...
    Preparation of files for WebHelp...
    Copying files...
    Updating files...
    Finish the preparation in 13 seconds

    Initializing the compiler...
    Generation of WebHelp 5.00 (10.00.1150)...

    Model Active Script error: do not initialize the script.
    Model error: cannot resolve macro: RegisterResolvers

    Fatal error: cannot run macro: RegisterResolvers in the build script.
    Model error: cannot resolve macro: PostCompile

    Fatal error: cannot run macro: PostCompile in the build script.
    Compilation of WebHelp finished 13 seconds

    Compilation is complete.

    ==============================================

    Reminder: This program is in place for YEARS.   Then, a week before, this error started happening.

    I uninstalled RoboHelp Office 2002, MS Office and reinstalled MSoffice, and RoboHelp.

    (Installed as a local administrator, the domain administrator).

    The error still occurs.

    I installed in on another server, and it works absolutely fine.

    I can't understand what is wrong.

    Any ideas?

    Thank you!

    ROn

    HR must be installed on your desktop PC, a server, and that can give you problems. But you say he's not working, so I'm not clear what type of assistance you are looking for. Do you want to run from the original PC?

    Generally, the problem you are reporting is because RH was installed without the necessary rights. The user needs the local administrator rights when installing and using it (with this version). You say it worked for years without this problem, which suggests the rights were removed, intentionally or not. Whatever the reason, reinstall it to do with these rights. See http://kb2.adobe.com/cps/597/rb_597984.html

    I wonder if you have installed with a system admin logon and try to use the product with a personal login. Your version of HR must be installed with the connection of the user.

    See www.grainge.org for creating tips and RoboHelp

  • Merged WebHelp no longer recognizes the varying links (.. / directory/file) 6 RoboHTML

    RoboHTML no is no longer allow me to use a variable link (.. / Directory/File.htm) on my Web server. It is the concatenation of the C directory with the directory on R (Web server).

    I have not had this problem with X 5 at all, never. I have a complete KB built with RoboHelp X 5 that works perfectly, and now, with RoboHTML 6, I can't generate a section of the WebHelp merged to the Web server.

    Here is what the message looks like. I changed some names of files a bit, but not the error:

    ---------------------------------------------------------------------------
    From compilation...
    WebHelp preprocessor 6.00.099

    Compilation of R:\mergedGenerated\mergedProjects\Closing\closing.htm...

    Preparation create WebHelp...
    Compensation output folder...
    Preparation of files for WebHelp...
    Copying files...
    WARNING: failed to copy "C:\RoboProjects\mergedProjects\subProjects\Docs\C:\RoboProjects\mergedProjects\subProjec ts\Type\Fee.htm" in "R:\mergedGenerated\mergedProjects\Docs\C:\RoboProjects\mergedProjects\subProjects\Type\Fe e.htm. reason: source does not exist.

    Internal error occur, impossible to generate WebHelp.
    ---------------------------------------------------
    It stops here. The file is there (fee.htm) and the link is there in the book such as described. It has not been broken, missing or damaged.

    If anyone has seen elsewhere, please let me know if you have a solution and the answer off list as well, if you can. This I'm going back to X 5 to do my updates (thank goodnes for backups).

    Thanks in advance!

    UPDATE

    I got the word of Support technique Adobe level 2 (after providing the part of my project):

    CORRECTION: RoboHelp 6 is not set to work with related links to external files in the > TABLE of CONTENTS< in="" merged="" webhelp.="" a="" hard-coded="" link="" with="" a="" drive="" name="" (i.e.,="" r:/something)="" has="" to="" be="" used.="" (a="" relative="" link="" is="" usually="" expressed="" with="" a="" "dot"="" "slash,"="" or="" "dot="" dot"="" "slash"="" to="" express="" a="" path,="" like="" this="" ../directory/subdirectory/filename.htm="" that="" will="" work="" on="" any="" server="" or="" pc="" with="" the="" same="" directory="">

    RH6, external links (for merged WebHelp and other links) must be "hard-coded" with a physical path * including mapped drive letter *, for example:

    file:///G:/mergedGenerated/Department/filehname.htm

    Not only that, but if there is an error in one of the projects (including one of my subprojects has) audit of Robohelp 6 errors stop the compilation and the 'mistakes' (closes).

    This means that a file that will compile and generate in RoboHelp 5 cannot do HR 6 If errors occur.

    There seems to be no way to link to my URL in the table of contents of the file that contains the error, except for physically type the link.

    We are looking at other tools that will allow which connects with the merged files.

    If anyone else has problems of compilation of a file in RH6 who worked in RH5, external, related links could be the problem.

    Just to let you know.

Maybe you are looking for