Failed to load plugins in the MediaCore folder

Similar Questions

• Error, "Page failed to Load", while customizing the control panel.

  Hello

  I recently inherited a second hand dell tower which has Windows 7.

  Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

  After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

  I went through various forums for the answer, but nothing helped.

  Any suggestions?

  Hello

  Thank you for the update. It is unfortunate to know that you still experience this issue.

  As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please, try the steps above and update with the State.

  Thanks again for we keep posted!

• Failed to load data from the staging area using the map of ERP SAP ABAP

  Hello

  I am new to ODI and some challenges. ODI 11g (11.1.1.6.0) I want to move data from a SAP EHP6 system to a warehouse of the oracle. I got the table that I need, using the SAP reverse engineering metadata browser. I then created the interface and on executing this operation fails on task/Session 13 - Loding - Srcset0 - load data into a staging. I use a shared directory. I put FTP_TRANSFER_METHOD = FSMOUNT_DIRECT. I get the error message is

  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File '< string >", line 14, in < module >
  Load error: see /home/dwsap/ZODI_13001_11001_GLOBAL.log for more details
  
  to org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  to com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
  to com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  to com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
  to oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
  to oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  to oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  to com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
  to com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  to com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
  to com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
  to com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
  to oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
  to oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  to java.lang.Thread.run(Thread.java:744)
  Caused by: Traceback (most recent call changed):
  File '< string >", line 14, in < module >
  Load error: see /home/dwsap/ZODI_13001_11001_GLOBAL.log for more details
  
  to org.python.core.PyException.doRaise(PyException.java:219)
  to org.python.core.Py.makeException(Py.java:1166)
  to org.python.core.Py.makeException(Py.java:1170)
  to org.python.pycode._pyx0.f$ 0 (< string >: 50)
  to org.python.pycode._pyx0.call_function (< string >)
  to org.python.core.PyTableCode.call(PyTableCode.java:165)
  to org.python.core.PyCode.call(PyCode.java:18)
  to org.python.core.Py.runCode(Py.java:1204)
  to org.python.core.Py.exec(Py.java:1248)
  to org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
  to org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
       ... 19 more
  

  
  

  I checked the log file and it contains the following

  
  

  $ ZODI_13001_11001_GLOBAL.log more
  
  SQL * Loader: release 11.2.0.4.0 - Production on Thu Mar 27 11:19:17 2014
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  SQL * Loader-704: Internal error: ulconnect: OCIServerAttach [0]
  ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA
  

  
  

  I checked my tnsnames.ora and it seems to be OK

  
  

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  XXXXXX =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxx) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = xxxxxx)
  (SID = xxxxxx)
  (GLOBAL_NAME = xxxxxx)
  )
  )
  

  
  

  Here's my listener.ora
  

  
  

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxx) (PORT = 1521))
  )
  )
  ADR_BASE_LISTENER = / u01/app/oracle
  
  

  
  
  

  What could be the problem?

  Concerning

  Thanks a lot for your help. The problem is that I had put in the incorrect name of the instance.

• Error message "failed to load Tosrfcom" on the Satellite Pro U200

  Hello

  I have laptop Toshiba Satellite PRO U200 with pre-installed VISTA professional
  After restarting, even for the first time, having the following error in the event log:

  Log name: System
  Source: Service Control Manager
  Date: 07.07.2007 01:29:15
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  The next (s) starting or starting system could not load:
  Tosrfcom

  by:

  http://www.EventID.NET/

  Can't find a solution!

  someone knows how to fix this?

  Hey Buddy,

  did you have already recovered the system (installed completely new from scratch)? If it is already done, then do it and see if the same error again.
  Maybe it s just a software problem and can be solved by reinstalling the operating system.

  Welcome them

• Failed to load XP on the same computer using the product key on the case of the CPU.

  I uninstalled XP and tried to load Window 7 s. had driver problems. Let down. Now I can't reinstall XP on the same computer using the product key on the case. I get a message "invalid Key". It's a Dell PC 6 years, if that matters.

  As I said, you will need the manufacturer's recovery disk, or disk OEM System Builder.

  Do you have which drive tried to use?

  You may be able to borrow a disk OEMSB from a friend - or you may be able to order the Dell recovery disks (they are cheap).

• Failed to load data using the contour load utility

  I am unable to load data using contour utility charge.
  Assigned data loading dimension such as: account
  Driver-Dimension such as: period
  Member as a pilot: Jan
  
  Connection file:
  
  Account, Jan, Point of view, the name of Cube data loading
  Investment, 1234, "India, current, heck, FY13", Plan1
  
  
  Utility of contour control
  OutlineLoad A:pract U:admin /I:C:\test1.csv /D:Account /L:C:\lg.log /X:C:\ex.exc
  
  
  Exception file
  
  [Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1
  [Thu Mar 28 18:05:39 GMT + 05:30 2013] com.hyperion.planning.InvalidMemberException: Member India, common, rough, FY14 does not exist or you do not have access to it.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
  
  
  Log file:
  
  
  Connected application "Rlap", liberation 11.113, adapter Interface Version 5, supported and not enabled workforce, CapEx no taken care and not active, CSS Version 3
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Input file located and opened successfully "C:\load.csv".
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Record header fields: account, Jan, Point of view, the name of Cube data loading
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Located by using 'Account' dimension and for the loading of data into the application 'Rlap.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Loading dimension 'Account' has been successfully opened.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] A refresh of the cube operation will not be run.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Create filters for safe operation will not be performed.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
  
  
  
  Infact members exist in outline.
  Any help would be appreciated.

  can you double check your csv file, open it in a text editor, because the error is showing additional citations.

  [Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• failed to load attribute shows the main class of a java file

  Unable to open this file KJV.jar response from my computer was as stated above

  Try the steps from the link give below

  http://www.ehow.com/how_5021615_execute-jar-file.html

• Error loading plugins at the launch of Illustrator cs4 standard

  I'm on a Mac OSX Yosemite. I have CS4 standard suite and when I try to open illustrator that I receive and errorr message

  then the program hangs and I have to force quit. Photoshop opens and works very well. I decided to uninstall cs4 and re install. that did not help. I always get the same error and the show. I'd love to help anyone can offer.

  also now my adobe acrobat 9 pro is the gel and will not open a pdf file. I tried uninstalling and reinstalling and I get this message. When I hit continue he freezes as well and I have to force quit.  also, I don't remember when I bought 9 pro and have no idea where is my serial number. I would like to know how to recover as well.

  

  Thank you!

  Kim

  Kim,

  I believe that this correction by Raul Alvarez and Benjamin Fleisher should solve the problems of CS4/Yosemite involving Photoshop once and for all, without the need to always open Photoshop first.

  https://github.com/ralvarezt/aics4_yosemite_fix/releases

  See this thread, especially #6, 8 & 9 messages:

  https://forums.Adobe.com/thread/1632432

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• FLT Sim Airbus Series 1 & 2 will not load in the correct folder

  Hello

  I just bought Airbus series 1 & 2 MS FltSim x and he refuses to load it into the appropriate folder (cannot install this prog pse select your correct dir fltsim x) (c:\prog files\ms games\ms fltsim x files).  The file is located in this directory already, but it will not in charge.  It seems that all my fltsim x files are in a different directory (AJP\documents\fltsim x files) and not the one preceding.

  I tried to rename the AJP file but will not work and I moved all the files for the fltsim x folder in prog file and still it will not work however, I also noticed that when I moved all the files of the AJP folder to put it in the folder of the prog and I try to play the game, it loads a .bin file in the folder of the AJP it each time.

  My computer is a computer game of superior specification with 8 MB of memory and a graphics card excellent MS Vista Ultimate x 64 bit fully updated running.

  I have had some problems before with FSX and had to use MS help and of the uninstall and reinstall FSX a few times and then after that it didn't even once I formatted my hard drive and did a full reinstall of everything and since then everything has been ok, but I tried to load the game on my laptop and couldn't as MS States that the game has been used many times , so I will not be able to uninstall again.

  If you are not sure?  So I am but if you can help I would be grateful.

  Thank you

  Hello andy04,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try to install as an administrator.  Right click on the installer and select run as administrator.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Detect when HTML5 audio stream started playing or failed to load

  I'm working on an application audio streaming using the HTML5 and webkit browser. I created an audio stream using code similar to the following:

  var = new Audio audio
  audio.setAttribute ("src", "url of feed to play here");
  audio. Play();

  I would like to be able to tell the user:

  (1) when the feed was loaded and gets ready to play. This is because the stream can take a long time to load and I want to inform the user that the application works.

  (2) when a feed failed to load. If the flow is interrupted for some reason, I wish to inform the user that something did not.

  Does anyone have any ideas on how I can do this?

  There are a lot of events and properties on the media items. For example, you can add an event handler for the 'mistake' to detect if the load fails. The 'loadeddata' event is raised when data is actually down. There is also an event of 'progress', but I have not much used. There is an event of 'game '.

  I'd be a little careful about the assumptions of State - for example I would not be surprised if the press started playing before being fully charged. Seems to me the type of optimization that someone might throw together

  So I threw the following test code.

  appstart = function() {
      var main = document.getElementById("main");
  
      var b = document.createElement("button");
      var t = document.createElement("div");
      var a = document.createElement("audio");
      b.innerHTML = "Play";
      b.addEventListener("click", function() {
          a.addEventListener("timeupdate", function() {
              t.innerHTML += "Played "+a.currentTime+" of " + a.duration + "";
          });
          a.addEventListener("progress", function() {
              t.innerHTML += "Progress";
          });
          a.addEventListener("load", function() {
              t.innerHTML += "Load";
          });
          a.addEventListener("error", function() {
              t.innerHTML += "Error";
          });
          a.addEventListener("playing", function() {
              t.innerHTML += "Playing";
          });
          a.addEventListener("stalled", function() {
              t.innerHTML += "Stalled";
          });
          a.addEventListener("loadeddata", function() {
              t.innerHTML += "Loaded";
          });
          a.src="long.mp3";
          a.play();
      },0);
      main.appendChild(a);
      main.appendChild(b);
      main.appendChild(t);
  };
  
  window.addEventListener("load", appstart, 0);
  

• SOA server Bounce fails to load spring-context components

  Hi all

  We see this issue in one of your environments and only with Composites containing the spring context item. When one of the server in the cluster in SOA has rebounded, composites with the component of spring-context fail to load with the error below. All our composites are independent and no reference to the other. They use Spring-context for some treatment as (JPA to insert into DB, write a file through java code etc.). Please help us by providing clues about what can be done to solve these problems. Thank you

  < 24 April 2014 23:56:59 GMT > < error > < oracle.integration.platform > < SOA-20020 > < deployment of composite 'ABCDComposite' failed: Error occurred during deployment of the component: ABCDTransformer to service engine: implementation.spring, for composites: ABCDComposite: didn't concatanate 2 following URL: home = 'oramds:/deployed-composites/VDCS/ABCDComposite_rev1.0/' and parent = "null".. >

  2EE. J2EEWorkManager$ WorkWithListener.Run (J2EEWorkManager.Java:184)

  at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)

  Caused by: oracle.fabric.common.FabricException: didn't concatanate 2 following URL: home = 'oramds:/deployed-composites/VDDS/ABCDComposite_rev1.0/' and parent = 'null '.

  at oracle.fabric.common.metadata.MetadataManagerImpl.resolve (MetadataManagerImpl.java:323)

  at oracle.integration.platform.blocks.java.SpringServiceEngine.load(SpringServiceEngine.java:438)

  at oracle.integration.platform.blocks.java.SpringServiceEngine.load(SpringServiceEngine.java:90)

  at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployComponents(CompositeDeploymentConnection.java:243)

  ... 19 more

  Caused by: java.net.MalformedURLException

  at java.net.URL. < init > (URL.java:601)

  at java.net.URL. < init > (URL.java:464)

  at oracle.fabric.common.metadata.MetadataManagerImpl.resolve (MetadataManagerImpl.java:320)

  ... more than 22

  Just in case someone needs the solution for this:

  Composite with spring component fails to load after rebooting the server in Cluster (Doc ID 1405168.1)

  Applies to:

  Oracle SOA Platform - Version 11.1.1.3.0 to 11.1.1.6.0 [version 11 GR 1 material]

  Information in this document applies to any platform.

  Symptoms

  If a compound containing a SPRING component fails to load after rebooting the SOA server in a clustered environment, then you are most likely facing this problem:

  The problem with composites having a BPEL process that uses a SPRING component in the flow. Whenever an adapter incoming or outgoing fails for some reason any and a restart of the server is required, after the reboot, the composite goes into a wait state and has no way to access to I rolled up.

  Cause

  The cause of this issue has been studied in published Bug: 12936989 and a fix is now available for PS2, 3 and 4.

  Solution

  Apply the Patch: 12936989

  -In My Oracle Support, go to the patches and updates & and searching Patch ID 12936989.

  -Download the version of the patch for your version of SOA. If you can't find your version from the list, please create a Service request for Support of Oracle SOA team.

  -Apply the patch using the README file that is associated with and then test the issue again.

  s ' Please make sure that you apply first to the test environments and to perform the necessary tests to make sure that you don't experience side effects before production and post-production.

• One of the MediaCore plugin fails to load when loading AE

  After effects of warning: the following plugins failed to load. Plase reinstall these plugins: D:\Program Files\Adobe\Adobe after effects CS6\Support (MediaCore plug-ins)\Common\ImporterARRIRAW.prm Files\

  EI starts normally after you click OK.

  This happens whenever I boot, reinstall AE does work, need help!

  

  Version: 11.0.0.378 (CS6)

  OS: Windows 7 Ultimate SP1 64-bit (6.1.7601.17514)

  The plug-in on Labs ARRIRAW site does not work in After Effects, so he never goes to load. It's just for Premiere Pro.

• HAVE failed to load the plugin

  I am in the process of developing a plugin.

  The plugin used to charge until recent times.

  I gives a message "Error loading plugins XXXX.aip" with no further details.

  The code is without compilation error (of course )

  Anyone has any idea of what could be a possible reason for this?

  If the plugin was loading before, I doubt that the PIPL is the problem. The PIPL simply tells Illustrator your plugin (which is actually a DLL) is an Illustrator plugin. Any DLL that is not who is ignored.

  The fact that you get an exception not handled in your plugin is strange - which suggests that you are called to a form; you don't get that unless he invokes and try to call something in the code.

  Here's a question: you have any globals or static you've added lately? If you do something like this:

  --------------- snip ----------------

  ...

  ...

  Foo MyLocalObject;

  extern 'C' ASAPI ASErr PluginMain(char* caller, char* selector, void* message)

  {
  ...

  ...

  --------------- snip ----------------

  If you inside the constructor of MyLocalObject, something that would be carried out before PluginMain has been called. It is possible that you will call a suite which has not yet been loaded (where the exception of reference 0 x 00000000000000). It's my best guess.

• CineForm Plugins failed to load

  Is anyone else getting this error?

  :

  After effects of warning: the following plugins failed to load. Please reinstall these plugins:

  C:/Program Files/Adobe/Common/Plug-ins/7.0/MeidaCore/CineForm/CFHD_AVI_Importer32.prm

  C:/Program Files/Adobe/Common/Plug-ins/7.0/MeidaCore/CineForm/CFHD_MOV_Importer32.prm

  I can't understand how to reinstall.

  These plugins can be deleted from C:/Program Files/Adobe/Common/Plugins/7.0/MediaCore/CineForm/ because they are no longer needed in Adobe CC products.

  We will be removing them to the installer of GoPro Studio in the next version.

  Jake Segraves

  Director of technical support

  GoPro