From Firefox 26, MP3 on Windows XP opens in the browser with the built-in player. The user should be better informed.

Similar Questions

• Everytime I open firefox, I get a window that opens. Doesn't happen with IE or Chrome

  Whenever I open Firefox, I get another window that opens on the home page. It's almost empty with a few lines at the top of the page and the registration of the user of words. It has happened since Firefox updated on my computer yesterday, even after uninstalling and reinstalling.

  That's great! Please make sure you choose the solution so that others can benefit from. Also, it's users like you that make the difference when you report.

  Thank you!

• I try to maintain a "split screen" of two separate windows. Both windows are open on the left and I need an opening on the left and the other to open on the right

  I have a fixed window on the left side of my screen and I need coninuously to open and close a second window on the right side of my screen.  The right window keeps opening on the left on my fixed window.  How can I keep the fixed windows left and right opening and closing (or variable) in place on opposites of the screen?

  Buy a second monitor and install it.

• When I open firefox v 37.0.2 that open all the tabs from the previous session, I do want my homepage tab to open

  This problem started when I refreshed recently Fire Fox due to other problems I had. Options > general > fire fox on startup is set to 'show my home page ". In the support forum, I found another user with the same problem and the solution for him had to do with the user.js file in the profile folder? Subject: config? In any case, the answer was to delete that file, or better yet delete all the text in it and save this file empty and set it to read only to prevent it from reappearing. That's all beyond me and my skinny computer knowledge and I don't even know if I have a user.js file. Help, please

  My problem is now solved. I don't know if there's someone else out there who would do what I did, but just in case, I'll tell you at the end of the day, what was causing the multiple tabs to open every time I opened Firefox, at least as far as I understand. While I contemplated the helpful response more returned hoping to understand what was wrong with my Firefox, my son has shown out of town and 5 minutes, he found out what I did wrong. In Options > general > Home Page, I got an address which included not only the home page I wanted 'Google News', but apparently the addresses of all the other tabs this guarded appearance until when I started towards the top of Firefox. Maybe it's not exactly the right explanation, but change the homepage to "News.google.fr" solved the problem. Thanks to everyone out there who gave their best to help me, I'm sure it's hard to solve problems like that when he would never come to you that someone would do the things they do. Thanks again.

• Can't access Gmail from Firefox, using my laptop Windows 8.1

  Hello

  I FVD Speed dial and Eversync installed on my Windows 7 laptop which I use for ages now and never had any problem. One of my speed dials is for my Gmail account, but I can't get into my email on my laptop which has Windows installed from Firefox or Cyrco 8.1 Although I can do without difficulty using Chrome and Opera. On this same laptop (ongoing enforcement W8) everything speed dials are great - it's only the Gmail that does not work and I get the following message:

  "The page is not redirecting properly".

  Firefox has detected that the server redirects the request for this address in a way that will never end.

     This problem can sometimes be caused by disabling or refusing to accept cookies."
  

  I tried every simple troubleshooting guide I can find (including going in about: config and make changes there) but nothing works and it seems (from what I've read) does anyone else have this perculiar problem that I am experiencing.

  Gmail is one of the dials speed that I use most, it becomes really frustrating and I love this browser so don't want to abandon it, but if I can't solve this problem I'm afraid I'll have to.

  Can someone help me please?

  Thank you

  Hello SMae64, please try the steps in the Web sites say cookies are blocked - pledge

• Firefox blocks ("crashes") almost everytime I open a second browser window. How can this be repaired?

  I recently (about a month) downloaded the latest version of Firefox, and since then, the browser crashes almost everytime I open a new window in Mozilla browser. I've never had this problem in the past.

  You use the default theme? If no, place you in default theme.

  If this isn't a problem with a 3rd party theme, try Firefox SafeMode.
  
  A way of solving problems, which disables most of the other modules.

  1. You can open the Firefox 4.0 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  2. Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox SafeMode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• 50 Firefox on Win10 now refuses to open files the

  FF50 on Win10 will not open local files, such as file:///C:/Users/MN/Documents/something/index.html. She claims that the file is inaccessible. No problem on macOS 10.12.1. It's VERY new behavior - I've never had this problem before. I run an application that produces web pages, and I need to preview them before you download, it is a MAJOR obstacle. Chrome and Edge have no trouble with that.

  I think it's done for reasons of security, but I need to be able to ignore it. I'll take the risk.

  If you start from

  file:///C:/

  You can navigate your way to this folder? To what extent can you get?

  For the love of science, could test you a few other methods open index.html in Firefox to see if none of them work:

  • Double-click the file in Windows Explorer (if Firefox is your default browser)
  • in Windows Explorer, right click on the file > open with (if indicated)
  • Drag - move the file in Windows Explorer to a Firefox tab
  • in Firefox: File menu > open the file (or Ctrl + O)

  One of the changes in Firefox 48 + title is e10s, separating the browser interface process the process of content page (happy process move plugin - container.exe). When you first install Firefox (or empty your profile), Firefox evaluates if your system is compatible with e10s and sets a flag to enable a at your next session. That would explain how the second run was different from the first, so let's check on that.

  Are you using e10s?

  You can check if you have this feature enabled as follows. Either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press enter/return

  In the first table on the page, find the line "Multiprocess Windows" and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by browser.tabs.remote.autostart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• Windows7 windows show open on the taskbar, but seem to be out of the screen-how can I get the focus?

  New Windows 7 and Firefox - icon in the taskbar, but will not display the window on the screen. When I put the cursor on the icon the little windows show which is open. It seems that the windows display is somewhere off the coast on the right side of the screen. Don't have a clue as to how it happened. How can I get the windows on the desktop where I can see? Thanks for all the tips that will help you.

  In Windows 7, pressing/holding the windows key and right arrow key FINALLY made the window reappear to me! Deleting the localstore.rdf did NOT work for me, unfortunately.

• When you use "cmd + click link" to open a link from Gmail in a new tab - tab opens in the foreground the background square.

  When I receive links sent in Gmail and I want to view them I usually 'Press cmd + click on the link' Open link in a new window. When I do that in Gmail it opens as a foreground tab, even if my default action is to open in the background.

  This is not the case in Hotmail or other site - just for Gmail. If I right click and open in new tab, then it opens correctly in a background tab but I wish that this action using 'cmd + click' if possible.

  What is the value of the browser.tabs.loadDivertedInBackground pref?

  • http://KB.mozillazine.org/about:config

• Refresh the parent page while a modal window is open to the APEX 5.

  Does anyone know if there is an easy way to do this in APEX?  Here are more details:

  I have an APEX 5 page with a report that shows orders for a customer.  The user presses a button to open a popup that allows them to add commands to the State.  If we add a firm order the modal pop-up window and the report is refreshed.

  However, I also have an ' Add and add another "button that adds the command to the collection, the report is based on and then deletes fields on the modal to allow another order to be entered."

  The user can see the report in the background, but the controls are not added until they close the modal window.

  Is anyway to update the classic/pages in the background report to give the user a visual indication that an order has been added every time they press 'add and add another '?

  Thank you!

  Hello

  You can create a dynamic action with the following javascript code:

  parent. $('#id_standard_report'). Trigger ('apexrefresh');

  You must assign a static ID to your standard report. Replace "id_standard_report" in the code with your code.

  Sergio

• Windows Installer opens at the start of the computer

  Start the computer the Windows box install rises as if it is trying to install something disappears after about 20 seconds.  He has just begun this doing.

  Check here:
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  What have you tried to install lately? As a printer or?

  http://support.Microsoft.com/kb/290301
  Description of the Windows Installer CleanUp utility
  The Windows Installer CleanUp utility deletes all files and registry settings associated with the configuration of Windows Installer of a program.

  Does NOT remove an application, allows you to re - install a.
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Rob - bike

• problem opening session: the user profile service failed to connect

  original title: problem opening session

  I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix

  This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.

  Is that what your error message: unable to load the user profile and the user profile service has not the opening of session

  If so, please read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a system restore first, if not help, run it
  Microsoft support tutorial below.

  2. If you cannot connect to your own account, you see another
  next to your admin account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
  the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a
  Date of when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

• How can I stop Windows 7, showing all the user once a user disconnects

  Hello

  I use Windows 7 Professional 64 bit.

  I went to the Start button. All programs | Accessories | Run, and ran the following command...

  controluserpasswords2

  ... Running this command opens the "User accounts" window, on which I unchecked the option for "users must enter a user name and password to use this computer".  Then, I chose a particular user that I had named "Auto-connect" and entered the password of this user so that this user 'AutoLogon' could be connected automatically on every time the PC boots.  This is how I want to just it.

  The "Automatic logon" user has limited privileges, I want my users to be able to and sign out and then sign in as a user with higher privileges.  Currently, when I try to do it by clicking the Start button, and then selecting Shutdown | Logoff, this brings me to the kind of a "Welcome screen" that displays a a separate icon for each user name which I configured on this PC.

  I really prefer if instead of indicating the name of each user configured at this point, that Windows would require the user to type in here a user name valid (rather than just picking from the list).

  If someone can tell me if this is possible (without giving up the ability to automatically connect my 'Automatic login' user), I would really appreciate it.

  Thanks in advance,
  Paul

  Run the policy editor gpedit.msc, then look for the item "Interactive logon". Now, select the item "do not display last user name."

• Windows Installer update in the user Session

  I use a WSUS 3.0 Sp2 server and the WUA_SearchDownloadInstall.vbs tscript for install updates on Server 2003 X 64 SP2. Search and download works fine logged on as a user, but the installation fails unless I'm actuall 'connected' as a member of the Administrators group. I tried things like "RunAS" and "PSexec" by using the credentials of the directors, but it still does not install it.

  An excerpt from WindowsUpdate.log. It shows that istrying Windows Update to do something under my ID "HST25772\LOCALUSER" (my user), even if I started the script with PSExec (1.98) and used my administrator credentials. I'm relatively certain that this will cause the failure. If I do a full logon with the same ID Admin, installation works very well. Is there a way to perform the installation of WU part in session 'user' but use PSExec with the Admin ID? All thoughts of work around this would be appreciated.

  Bob

  Agent *.
  Agent * START * Agent: installing updates [CallerId =]
  COMAPI - updates to install = 1
  Agent *.
  [COMAPI <-- submitted="" --="" comapi:="" install="" [clientid=""> ]
  Agent * updates installed = 1
  Agent * title = update for Windows Server 2003 x 64 Edition (KB973917)
  Agent * UpdateId = {6371B65A-6669-448C-866E-AE6A85312520}.105
  Agent * bundles 1 updates:
  Agent * {9D28A8AF-D0C1-4B18-BA70-17BF2CED077A}.103
  EEHndlr WARNING: Failed to fill ServiceStartup entries in the Cache: error 0 x 80070002

  Agent warning: failure of LoadLibrary for c:\windows\system32\srclient.dll with hr:8007007e
  Manager to try to create a remote process manager as HST25772\LOCALUSER in the session 0
  DnldMgr preparation of update for install, updateId is {9D28A8AF-D0C1-4B18-BA70-17BF2CED077A}. 103.
  Agent warning: WU client fails to deal with installing call Manager Update notificationfor with error 0 x 80070005
  Agent warning: WU client fails to deal with installing call Manager Update notificationfor with error 0 x 80070005
  Agent warning: WU client fails to deal with installing call Manager Update notificationfor with error 0 x 80070005
  Agent *.
  Agent * END * Agent: installing updates [CallerId =]
  (Non-interactive) Offline detection trigger
  Agent *.
  AU #############
  To THE # START # to THE: research updates
  AU #########
  COMAPI > - RECOVERY--COMAPI: install [ClientId = ]
  COMAPI - installation call is successful (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  COMAPI - reboot required = No
  COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  COMAPI-
  COMAPI - END--COMAPI: install [ClientId = ]
  COMAPI-
  TO THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  Agent *.
  Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  Agent *.
  Agent * Online = No; Ignore download priority = No
  Agent * criteria = "IsHidden = 0 and IsInstalled = 0 and DeploymentAction = 'Installation' and IsAssigned = 1 or IsHidden = 0 and IsPresent = 1 and DeploymentAction = 'Uninstall' and IsAssigned = 1 or IsHidden = 0 and IsInstalled = 1 and DeploymentAction = 'Installation' and IsAssigned = 1 and = 1 RebootRequired or IsHidden = 0 and IsInstalled = 0 and DeploymentAction = 'Uninstall' and IsAssigned = 1 and = 1 RebootRequired."
  Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} managed
  Agent * scope of search = {Machine}
  EEHndlr WARNING: Failed to fill ServiceStartup entries in the Cache: error 0 x 80070002

  EEHndlr WARNING: Failed to fill ServiceStartup entries in the Cache: error 0 x 80070002

  Agent * updated added {6371B65A-6669-448C-866E-AE6A85312520}.105 in the search result
  Agent * updates found 1 and 48 categories in the search. entities has been evaluated Appl. rules of 151 on 909
  Agent *.
  Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  Agent *.
  To THE > # RETURN # to THE: research updates [CallId = {ACA50873-6F80-4549-A24E-9040BC3C56FE}]
  # 1 detected updates
  AU #########
  # End # in THE: research updates [CallId = {ACA50873-6F80-4549-A24E-9040BC3C56FE}]
  AU #############
  Notifications to THE present is disabled.
  Report REPORT EVENT: {C2F38CF5-9120-4F3D-B04E-6A44B2C862C2} 10:11:26:412 2010-11-18 - 0600 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success software sync Windows Update Client detected 1 updates successfully.
  Report REPORT EVENT: {64E725E3-4790-482A-833A-6ECFB6914EFF} 10:11:26:412 2010-11-18 - 0600 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 success pre-deployment check the client status reports.
  Report REPORT EVENT: {2F6B5899-BD1E-4DC4-989C-0867ECD45AEC} 10:11:26:928 2010-11-18 - 0600 1 182 101 {6371B65A-6669-448C-866E-AE6A85312520} 8024200e 105 error content install Installation error: Windows failed to install the following update with error 0x8024200e: update for Windows Server 2003 x 64 Edition (KB973917).

  Solved my problem. Ran a command similar to the following to run my script "WUA_SearchDownloadInstall.vbs" "modified" under the system account:

  PsExec u administratorID Pei adminPW psexec s cscript //nologo WUA_SearchDownloadInstall.vbs

  Updates seem to settle normally now.

  Bob

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.