C:\Windows\mixer.exe appears when I turn on my computer first

Similar Questions

• Message appears when I turn on my computer (ie3sh.exe. unable to locate component)

  This message appears when I turn the computor as it

  This hads application could not start because bho, dll is not found.

  rienstalling the application may fix this problem.                      what it means

  to me, it looks like malicious software:

  Perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I OMIT the PASSWORD to START when I turn on my computer first? (I already deleted the Windows password)

  When I turn on my computer, a small box appears which says "STARTING password".  This was initially set up when I did accidentally one a fraudulent service called 'Mypcsave.com '.  The password is currently the guy who worked on my computer.  Once you enter his name, the screen, and then past to Microsoft screen where you can click on your user/guest to open a session.  All of this show has been removed to the best of my knowledge, but I would OMIT this step of signing with the STARTUP PASSWORD.  Any suggestions would be greatly appreciated! Thank you! Lora

  When I turn on my computer, a small box appears which says "STARTING password".  This was initially set up when I did accidentally one a fraudulent service called 'Mypcsave.com '.  The password is currently the guy who worked on my computer.  Once you enter his name, the screen, and then past to Microsoft screen where you can click on your user/guest to open a session.  All of this show has been removed to the best of my knowledge, but I would OMIT this step of signing with the STARTUP PASSWORD.  Any suggestions would be greatly appreciated! Thank you! Lora

  Ok!!!  I thought about it!
  Type in "syskey" & click on enter, then you will see a box that says SAM Lock Tool, click YES
  You will then see a box that says "Database WIndows Acount"... click on "UPDATE".
  Then click on "System generated password" If you DO NOT require a startup password.
  Then select "record the startup key locally.
  Click on 'OK' click on 'OK' and you're done!
  No startup password is required!

  Whewwww... I was faced with this for 2 months!  lol :)

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• How to stop my password that appears when I turn on my computer

  I changed my password and want to keep it a secret, but when I turn on my computer the password appears on the screen

  Where is it displayed?  There should be no way the computer show your password.  User name, Yes, but no password.

• Alienware x 51 r3 crashed to the Alienware logo screen when I turn on my computer first time every day.

  My new r3 Alienware x 51 will not start windows when I turn the first time on the computer in daily life.
  When the Alienware logo is displayed on the screen, the computer will not load. (No loading cycle appears under the alienware logo). Then the screen becomes black. Keyboard and mouse lights are turned off. Some time, the screen becomes blue background of windows, then the loading cycle does not work any time more and some, the screen has crashed on the Welcome screen of win 10. However, when I turn off the computer and start again immediately. It works normally. If I switech it off and then start it about 2 hours later, the computer will crash again. Every day the first time to activate it, I have to run it twice.

  I used Dell diagnostic software to search the computer, everything is OK. But it's my second X R3 51 during this period of a month. The last graphics card problem, I switched to this one. But the other also has the same problem. Therefore, in my view, it is that my other hardware problem? I connect a keboard Corsair K95 RGB, G502 mouse, joystick Thrustmaster and a saitek rudder. I used a USB 1 4 adapter to connect some of them. The X 51 system is widows 10. I've also used these materials with a X 51 R2 two years previous. Never encounter this problem.

  Got my X R3 51 in December. All of us have had this problem of gel. I "think" what fixed my X 51 R3 rose dating drivers for Intel hardware. Download and run Iobit Drive Booster or snail Majorgeeks.com driver and see if it helps.

  ATTENTION:

  If you use Iobit Drive Booster, uncheck download AdvancedSystem care before installing the Booster Drive. AdvanceSystem Care blocks every time my hard drive.

  Snail by car is easy and secure.

• the desktop icons no longer appear when I turn on the computer.

  Hello, I recently upgraded to an office update prompted and now the desktop icons no longer appear when I restart the computer. I can click with the right button on the desktop, select display, uncheck 'show descktop', then right click on the desktop again, select "Show the desktop" and they will appear. However, when I restart the computer they will disappear again and I have to re do the process again. I use my desktop icons/shortcuts all the time. Does anyone know how to remedy this?

  Hello, I recently upgraded to an office update prompted and now the desktop icons no longer appear when I restart the computer. I can click with the right button on the desktop, select display, uncheck 'show descktop', then right click on the desktop again, select "Show the desktop" and they will appear. However, when I restart the computer they will disappear again and I have to re do the process again. I use my desktop icons/shortcuts all the time. Does anyone know how to remedy this?

  See if this work...

  Right-click in a space of taskbar oprn > select Task Manager > processes tab > right-click on explorer.exe > click on end process > Applications tab > click New task... > of Opeb, enter explorer.exe > OK when.

  You check office. There the icons? If so, reboot, still exist the icons?

  If the foregoing does nopt working, do a system restore.
  Choose a date where you did not have this problem as your restore point.
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

• The analysis appears when I turn on my computer and it won't go away.

  If I hit Cancel I get error 1706. I have had this problem since I had to uninstall Roxio Creater 2009. No idea how I can get rid of the box Scan? In fact, I have two boxes to scan at the time.  One of them says: "the component you are trying to use is on a CD-ROM or another removable disk that is not available...". Insert the diskette "Scan", then click OK. "With this box, I have the opition to click OK or cancel. If I click Cancel then I get error 1706, if I click OK, it just says: access to the content of the service... but nothing happens. The second Scan box says "Please waith while Windows configures the analysis" with a Cancel button. I had this problem for a week the tims boxes are flashing and my computer is unusable basicall. I ran my anti-virus scans and there is no problem what so ever. Help!

  Hi EugeneWI,

  Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  You can also check if the software vendor has an uninstall program to remove the software completely from the computer.

• Need to disable the login page when you turn on the computer first

  I don't want the sign on the window to appear. I want to just bypass the sign in and auto and part of password go into Windows.

  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  How to automatically connect at startup in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• When I turn on my computer Windows 7, I'm frozen screen

  I have windows 7.  Lately when I turn on the computer everything is ok until I log in, then the screen opens and displays all my icons but remains frozen and nothing works.  Heelllp!

  Hello

  Thank you for giving us the opportunity to help you with the problem of Windows.

  Method 1:

  Step 1:

  We will start the computer in safe mode with network to verify functionality of Windows.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If it works fine in safe mode with network, then perform a clean boot and check if that helps:

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, work step 3: Reset computer to start as usual.

  Method 2:

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Check also for any other updates of device driver and application software.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  I hope that helps!

  If the problem persists, let us know.

  For all windows to post questions to please us.

  We would be happy to help you!

• Problem: When I turn on the computer, windows setup box appears and is installing a file

  After getting the "preparing to install" message, another message comes up saying "Please wait while windows configures roxio media manager.

  Then another message comes up saying "gathering required information".
  "The feature you are trying to use is on a network unavailable resource."

  "Click OK to try again or enter a different path to the folder containing the installation package 'Roxio Media Manager. MSI' area points to the following path C:\Documents and Settings\Jeffrey Brown\Application is In Motion. BlackBerry\Updates\6852A378-7780-4e80-B65-343C8D2C36AE\SR_MM\

  I have the Blackberry desktop manager installed on my computer and I also got a message saying there were some updates, but I was never able to download updates, if there are.

  How can I get rid of this process that appears everytime I turn on the computer?

  We had the same questions and the same messages.  Whenever you should cancel the installation, he returned again and again and much slowed down the system.  I canceled the installation of Roxio (but he kept coming back and coming back, he finally trying to cancel) and then used Windows install Cleaner. I found when I tried to install the vacuum it was already installed on the PC.  I ran and it worked with no run-time error.  I stopped and restarted and not have Roxio stuff want to install.

• The Explorer window Windows has atrted to appear when I turn on

  A Windows Explorer window began to appear when I switch PC.

  If I want to use Windows Explorer, I still specifically invoke it but now I have a window every time and I must minimize each time.

  IT is NOT an error but a confused nuisance.

  I can only think something in startup, or register, picked a setting to trigger it.

  Any ideas?

  "Deep" wrote in the new message: * e-mail address is removed from the privacy... *

  A Windows Explorer window began to appear when I switch PC.

  If I want to use Windows Explorer, I still specifically invoke it but now I have a window every time and I must minimize each time.

  IT is NOT an error but a confused nuisance.

  I can only think something in startup, or register, picked a setting to trigger it.

  Any ideas?

  I don't know why it happened, but as you say, there is probably something at the start.

  Next time that Windows Explorer opens, navigate to C:\Documents and Settings\All Users\Menu Démarrer\Programmes\Démarrage.  If the folder contains a shortcut to explorer.exe, delete the shortcut.

  Browse to C:\Documents and Settings\ [your user account] \Start - and repeat the process.

  If there are no shortcuts for explorer.exe in one of these startup folders, close Windows Explorer.

  Then, click on start / run... and type msconfig in the open: field.
  Click OK.
  Open the Startup tab and look for to explore or Windows Explorer. If it is there, please take note of the registry entry that calls the Windows Explorer - and the details of the quote in your reply.

• When I turn on my computer and the desktop comes up, I get error Runner "file name (updates from HP.exe) Runner has no... "

  When I turn on my computer and the desktop comes up, I get a Runner error - "doesn't have a Runner (updates from HP.exe) file name '-' (the id separator).»  If I click OK everything continues normally.  What should I do?

  It is an HP with Windows XP computer.

  Hello

   
   
   
  Try to perform the clean boot and check if it helps, here is the link:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353 
   
   
  Note:
   
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click Start and then click Run .
  2. type msconfig, and then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Webkit2webprocess.exe appears when I try to go on Safari. Any solution?

  Webkit2Process.exe appears when I try to open internet via Safari.  Solution?

  Hello

  You should check with Support of Safari and their communities (forums).

  Safari - Support
  http://www.Apple.com/support/Safari/

  Safari - communities
  https://discussions.Apple.com/community/Mac_os/Safari

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.