From MCM2 demonstration run on the W7 (starter)?

Similar Questions

• Where can I find the line start/run in the box start Windows

  I want to use the Msconfig function but cannot find the start/run line in which to enter.  When I hit the start icon (the microsoft logo), it is not clear.  I'm looking in the wrong place.  If this is the right place where it appears.  If this is not the right place to be looking, where should I look?

  Thank you

  1. you can use the search box instead of running it. It all works the same.

  2 in this case is to know how to restore/enable option run in the right side of the Start Menu:
  Right click on the Start button > properties > at the top, click on Start Menu tab > click Customize > scroll to find command run, put a checkmark in the box > OK

  You check Startmenu. Execution option should be there now.

• Out of track in the Menu start flashing in the window that closes then (XP and W7)

  I send the output of this command: "ipconfig/all" to a developer to obtain a software license.  When I enter this command in run of the menu start, the output flashes briefly in a window on the screen and then closes.  I can't read the output as it closes so fast.  This has happened in XP and W7 in Fusion (versions 2 and 3).  In Parallels, the window did not close but remained on screen so that I could copy or captures screen information in an e-mail.  Does anyone have a work around for this?  Is this a bug of merger?  Thank you.

  It is certainly not a question of Fusion.

  What you need to do is type 'cmd' in Start Menu Run which will create a terminal window.

  Starting from that, windows command "ipconfig/all".

  Finally to complete it type "exit".

• Presario stuck in the menu start repair

  Last night the cover on Presario laptop computer brand got slammed. Now when I go to start it continues to run in the repair start saying that it could take more than an hour to perform the repairs. He will not get off that cycle will restart and return to the same. Any ideas would be appreciated.

  Hello

  Try to rebuild the data to start manually as follows.

  If you do not, use another PC to create a rescue CD Windows 7.  Your laptop is listed as coming with 64-bit - ISO for this at the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• How can I get my application runs in the emulator?

  I followed the documentation by installing JAVA JDK4.6 (C:\Program Files\Java\jdk1.6.0_02), and then the Blackberry JDE 4.6 (C:\Program Research In Motion\BlackBerry JDE 4.6.0)

  I then did the environment paths are setup of Windows XP.

  CLASSPATH = C:\Program Files\Java\jdk1.6.0_02\bin

  JAVA_HOME = C:\Program Files\Java\jdk1.6.0_02

  JDE_HOME = C:\Program search in Motion\BlackBerry JDE 4.6.0

  Path = %JAVA_HOME%\bin;%JDE_HOME%\bin

  I have compiled the helloworld.java and it compiles with no errors. And then I'm going to build and run and the emulator starts, but the application does not appear in the emulator. I tried to load the .cod manually through the emulator and the application still does not work.

  What I am doing wrong? Please advice. Thank you!

  Have you looked for the 'icon' to launch in the downloads folder?  Once you have found it, click the icon to launch the application.

• "Error 1079: the account specified for the service is different from the specifiedfor account other services running in the same process" when I try to start it manually to the top of some program services.

  Original title: How can I restore my services to the default state.

  Here is the error message when I try to start it manually to the top of some service programs.

  "Windows cannot start the Diagnostic Policy on Local computer service."

  "Error 1079: the account specified for the service is different from the specified account.

  for other services running in the same process. »

  Hi raospent,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what services you try to start?

  You can follow this link & check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Hope the helps of information.
  Please post back and we do know.

• Cannot start the services of ICF error 1079: the account specified for this service is different from the account specified for other services running in the same process

  Original title: I'm trying to start the Windows Firewall.

  I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises.  What should I do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Logged in as an administrator on the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/2478117

  Method 2:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log.

  c. Select "this account", click on the Browse button, type Local Service and click ok.

  Type the password and confirm the password and click ok.

• Execute "dbms_stats.gather_table_stats in the start = > run until the peak hours = > pause = > restart from where he was arrested after the rush hour" mode.

  Guys,

  Please let know us if it is possible to run dbms_stats.gather_table_stats in "start = > Execute until off-peak hours = > take a break during peak times = > restart from where he was arrested after the rush hour" mode.

  I partitioned table with mammoth number of records requiring full table statistics collection once all 3 months. Stats gathering is so expensive that it takes almost 2 days to complete.  Our goal is to ensure that no SQL that runs during peak hours (15:00 to 22:00 hours) is affected by the collection of statistics. That's why we would like the stats collection to run above mode.

  Ideas, suggestions would be very appreciated and I will receive with the profound esteem.

  -Bugs

  Like others, I wonder why full stats are required.

  You nightly stats together people with reduced mobility?

  Check dba_tab_modifications for the changes made to the table, your stats every night, whether its stats are needed comes from there so if a partition has no 10% change, why you re - collect his stats for her?  There are a few other things going on behind the scenes, but close enough.  Even if you set additional stats there and kick that off, he'll simply choose the following who did not, risking several work trying to do the same thing

  theres probably 10 different ways to act how you're good with plql but generate your work statistics with something like that, then open multiple windows of sqlplus and divide it into sections while you are in the collection of statistics on several pieces at the same time.    Failure could write some autonomous plsql proc that analyzes a partition that went in there and call that any amount of time passing in the partition in a loop, but you get the idea of gathering statistics on more than one partition at the same time.

  Change the value of table_owner and table_name

  exec DBMS_STATS. FLUSH_DATABASE_MONITORING_INFO;

  Select the command from

  (select (nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0)) * 100)

  / nvl(b.num_rows,1) as change.

  "exec DBMS_STATS. GATHER_TABLE_STATS (' |) '''' || "TABLE_OWNER" | '''' || ',' || '''' || 'TABLE_NAME ' | '''' || ', granularity =>' | '''' || 'PARTITION | ''''||  ', PARTNAME =>' | '''' ||  a.PARTITION_NAME | '''' || ', ESTIMATE_PERCENT => DBMS_STATS. AUTO_SAMPLE_SIZE, METHOD_OPT => ' | '''' || 'FOR ALL COLUMNS SIZE AUTO ' | '''' || ')' as a command

  of dba_tab_modifications a, b dba_tab_partitions

  where a.table_name as "TABLE PARTITIONNEE YOUR BIG".

  and a.table_name = b.table_name

  and a.partition_name = b.partition_name

  and nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0) > 0

  )

  where to change > = 10

• My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

  My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Can't see the network PC MAC computer, unless I have use RUN in the start menu and type in the IP address.

  Original title: MAC to PC NETWORKING.

  I added my Mac to my PC network workgroup.  I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.

  Hi markymo777,

  I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.

  Hope the helps of information.
  Please post back and we do know.

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  No doubt.  If in doubt, download qualified help to solve the problem. It can be easily fixed, or not.  We cannot tell from here.

• SOLUTION EXPLORER. EXE must always run at the start of the TASK MANAGER after the LOGIN/WELCOME screen.

  Trying to restore the empty desktop icons by the recommendations, I have a white screen with a pointer after login and WELCOME screen.  CTRL-SHIFT-ESC gives me the TASK MANAGER. and I returned 'explorer.exe' I then the full desktop with white icons.  I need to do this every time I have start or restart the PC. I checked the regedit and the only entry to WINLOG, SHELL is "Explorer.exe" any ideas about a problem?  Thank you!

  Hi Eric1029,

  You can check if the following registry entries are correct.

  a. open the start menu, in the search bar type regedit, and then press ENTER.

  b. navigate to the following location and check the entries for "Shell" and "Userinit" on the right pane:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  "Shell" ="Explorer.exe" (REG_SZ)

  'Userinit"="C:\WINDOWS\system32\userinit.exe '.

  c. also check if you have the correct permission for this registry key (winlogon)

  d. right-click and select permission. Make sure that at least with that you have group administrators, system and installer of confidence with full control and users group read permission.

  e. check if you are able to launch explorer.exe in the window running in the Task Manager.

  Important: The above method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.