From the telnet session between calls of LabVIEW, TestStand
TestStand, I'll call telnet.llb VI.
In a step TestStand am opening a telnet session to IP address and the collection of the telnet (U32) connection. In the next step of TestStand, I pass the telnet connection to a telnet writing VI, but this error occurs.
"Dequeue item to acquire Semaphore.vi:1-> Write.vi:1-> Telnet Write.vi.ProxyCaller Telnet"
The telnet open, write, read and close the excellent work if I get the number of telnet in the same VI session. But I need to keep the session open between TestStand calls because a huge VI is not possible.
Thank you
Josh
Verify that your adapter for LabVIEW has reserved the execution. If it is already, I don't know, you may need to create a parallel thread that keeps the session active.
CC
Tags: NI Software
Similar Questions
-
Firefox does not save my tabs from the previous session, although I have chosen in options, to save my tabs from the previous session.
Firefox 4 saves the previous session automatically, so it is no longer necessary for the dialog box asking if you want to save the current session.
Use ' file > exit ' or ' Firefox > output "If you want to restore multiple windows.
You can use "Firefox > history > restore previous Session ' to get the previous session at any time.
There is also a button 'Restore previous Session' on the default on: Home home page.Another possibility is to use:
- Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.
Make sure that you do not remove the navigation, search and download history on Firefox to clear the browsing history when you close Firefox.
-
I want to register my phone with a chip from the Bahamas to make calls to the
I want to register my phone with a chip from the Bahamas to make calls to the United States, but it is not an option. Is there a work around for another option? I have unlimited international calls
Unfortunately, the SkypeToGo program is not available in the Bahamas.
TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest version of Skype: Windows & Mac
If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you. -
Derives from the system time when calling OR-Motion screw on PXI controllers
Hello
Just an email to avoid others wasting time when they are facing in this fantasy bug:
We use PXI systems with Controllers NI PXI running Windows 7 and the 7340 family cards (PXI-7344). We have noticed that when the calls when it's through screws OR-Motion to question the different registers of the State (e.g. position, ADC value, general axis or the reference state) axis, the (Windows) system clock runs FASTER either. OR-Motion calls most are performed per second, faster windows clock works. When you get into the status for 4 axes 10 times per second (lines 100 ms rate), the drift is greater than 5%!
I include here an example of program that reproduces this behavior.
It is an essential question, for example if save you data with or from the timestamps, and it gets even worse if Windows is configured to periodically synchronize its own clock to a server via the NTP Protocol (it's how we noticed this problem in the first place). In this case, you see large discontinuities in your data every once in a while. Our systems must be running automatically and record data continuously throughout the year, so this bug is a real challenge.
People at NOR been able to reproduce this bug too and are working on it (no idea of any CAR # yet). Note that this problem has not been seen on a DC non - OR Office running Windows 7 64 bit...
The exact configuration is the following:
Chassis PXI-1036
PXI-8101 (or PXI-8102 on another system) controller
4 PXI-7340 axes into the Groove 4, no physical connection for this test
(PXI-6221 in slot 2, not used in this sample program)
Windows 7 Enterprise SP1 32-bit English
LabVIEW 2011 SP1 32-bit English
OR-Motion 8.3
2.6.2 PXI platform services
(all software OR additional distribution 2012 DS1)
Controller BIOS: improved 1.3.1 to 2.0.1f0, problem given the two versions of the BIOS
I'll try to post here as soon as we receive news of NEITHER.
Kind regards
Vincent
Hi all
I wanted to let you know that the driver OR Motion 8.4 coming should solve this problem.
Best regards
-
Aurora does not reopen the windows and tabs from the previous session.
I just upgraded to Aurora 12.0 has, and now every time I restart Firefox, it does not re - open my windows and tabs from my previous session. It is a _major_ pain, that I keep in general 75-100 tabs open for different uses, to a point. Fortunately, Xmarks has my tabs open saved, but I have to reopen individually whenever I restart Firefox.
Thank you. After continue to dig and search, I came across this post on MozillaZine:
http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2420099It seems that the problem was the module associated with as opposed to something in Firefox itself.
-
opens with the tabs from the previous session
After update automatically to v18.0.1 a new FF session now opens with all the tabs that were open when I closed the previous session. How can I get back to where a new session opens only on my home page?
Ah Ah! It worked, it seems that it is a matter of Tab Mix Plus.
Thank you
-
Disable ECHO on the TELNET session.
Hello, all!
I have a certain task to execute commands sent over the TCP/Telnet connection of my apps on a Cisco device. So I would decline/stop any output as a response to the entry. I tried to use IAC DO GA and WHOSE ECHO, but it looks like the device are ignore it at all.
Any notice or what I need to check but in addition?
An illustration of what I'm doing in the apps:
Establish a TCP connection to the Cisco device
Received: ' FD FF FF FF FD 18 FF 1F FB FB 01 03 "Cisco device
Envoy: NT$ CMD_IAC, CMD_DO$ TN, TN$ OPT_GA.
CMD_IAC$ TN, TN$ CMD_WILL, TN$ OPT_ECHO.
CMD_IAC$ TN, TN$ CMD_WILL, TN$ OPT_TTYPE.
CMD_IAC$ TN, TN$ CMD_WILL, TN$ OPT_NAWS.
CMD_IAC$ TN, TN$ CMD_SB, TN$ OPT_NAWS, 132, 0, 0, 42,.
CMD_IAC$ TN, TN$ CMD_SE.
CMD_IAC$ TN, TN$ CMD_WONT, TN$ OPT_XDLOC.
CMD_IAC$ TN, TN$ CMD_WONT, TN$ OPT_NEWENV.
CMD_IAC$ TN, TN$ CMD_WONT, TN$ OPT_ENV, 13, 10,.
CMD_IAC$ TN, TN$ CMD_SB, TN$ OPT_TTYPE, 0, 'P', 'C', 'F', ' / ', ', 'R', 'V', ' / ', 'P' 'd', OF ', 'N',
CMD_IAC$ TN, TN$ CMD_SE.
/*
* Following the responses to the ciscoiacs
*/
CMD_IAC$ TN, TN$ CMD_DO, TN$ OPT_GA.
CMD_IAC$ TN, TN$ CMD_DONT, TN$ OPT_ECHO.
CMD_IAC$ TN, TN$ CMD_WONT, TN$ OPT_ECHO.
XMIT 100 bytes BG7159 44:50.29: 172.16.0.45,14333-> 89.253.0.8,23
ESTBLSHD SEQ = ACK D = 60 2266844313 = 1780728895 W = CTL = HSP 61440! ACK
DATA = FF FD FF FB FF FB FF FB FF 1F 18 01 03 FA 00 1F *... *.
84 2A 00 FF F0 FF FF 23 CF 27 FF CF 24 CF 0D 0A *... *... #.. '... $.. *
FF FA 18 00 50 43 46 44 52 56 50 44 53 2F 2F 4TH *... FCP/DRV/IHDP *.
F0 FF FF FD 03 FF FE FF 01 FC 01
Sent after the login sequence:
44:51.29 49 XMIT bytes BG7159: 172.16.0.45,14333-> 89.253.0.8,23
ESTBLSHD SEQ = ACK D = 9 2266844395 = 1780728981 W = CTL = HSP 61440! ACK
DATA = FF FD FF 03 FC 01 FF FE 01 *... *.
44:51.49 RCVD 40 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780728981 D = 0 ACK = 2266844404 W = 4037 CTL = ACK
And nothing coming back. After the show:
XMIT 86 bytes BG7159 49:19.24: 172.16.0.45,14333-> 89.253.0.8,23
ESTBLSHD SEQ = 2266844578 D = 46 ACK = 1780729359 W = CTL = HSP 61440! ACK
DATA = 43 4 45 41 52 20 43 44 4 D 41 20 50 44 20 53 4F * CLAIRE CDMA IHDP *.
53 45 53 53 49 4F 4 20 4 53 49 44 20 32 35 30 * SESSION MSID 250 *.
30 39 39 30 31 33 35 31 35 30 36 34 0D 0 * 099013515064... *
I don't want to receive following:
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729359 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=43 *C*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729360 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=4C *L*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729361 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=45 *E*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729362 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=41 *A*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729363 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=52 *R*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729364 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=20 * *
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729365 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=43 *C*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
ESTBLSHD SEQ = 1780729366 D = 1 ACK = 2266844624 W = 3817 CTL = HSP. ACK
DATA=44 *D*
49:19.24 RCVD 41 bytes BG7159: 89.253.0.8,23-> 172.16.0.45,14333
...
Cisco IOS-server telnet does not support negotiations ECHO. This is a bug.
-
problem with pipe separated from the input parameters to call
Hi all
I have a requirment as...
I have a Sp 10 which have 3 SETTINGS and 3 settings as shown below...
PROCEDURE sample_sp1 (p_start_dt IN VARCHAR2,
p_end_dt IN VARCHAR2,
p_shift IN varchar2,
p_out1 OUT t_bpd_nm, - array type
p_out2 OUT t_target, - array type
p_out3 to t_drr); -type of array
PROCEDURE sample_sp2 (p_start_dt IN VARCHAR2,
p_end_dt IN VARCHAR2,
p_shift IN varchar2,
p_out1 OUT t_bpd_nm, - array type
p_out2 OUT t_target, - array type
p_out3 to t_drr); -type of array
.........
..........
PROCEDURE sample_sp10 (p_start_dt IN VARCHAR2,
p_end_dt IN VARCHAR2,
p_shift IN varchar2,
p_out1 OUT t_bpd_nm, - array type
p_out2 OUT t_target, - array type
p_out3 to t_drr); -type of array
Now, I have to create a new SP. This SP, I have to call one of the top 10 SP and have to come back as a REF CURSOR.
the entries to the new MS are 3 as... (shown below).
create or replace new_sp (p_report_name IN varchar2,
p_report_inputs IN varchar2,
p_report_as_ref to ref_cur_type) is
..............
where p_report_name is a name of sp
p_report_inputs is the input to SP parameters with "|" separated pipes (ex: ' 23/04/2010 | 20/05/2010 | 2 ')
p_report_as_ref is setting to return as an OUT refcursor.
I'm unable to manage the setting shild (with tickets). How to separate input parameters and how can I call existing SP
with these settings?
friends... can someone help me please...
Thanks in advance...What of it?
with t as (select replace('500 Oracle Parkway| Redwood Shores| CA','|',',') str from dual) SELECT replace(REGEXP_SUBSTR(str,'[^,]+,'),',') first, replace(REGEXP_SUBSTR(str,',[^,]+',1,1),',') second, replace(REGEXP_SUBSTR(str,',[^,]+',1,2),',') third FROM t; ---- 500 Oracle Parkway Redwood Shores CA
-
This problem started when I refreshed recently Fire Fox due to other problems I had. Options > general > fire fox on startup is set to 'show my home page ". In the support forum, I found another user with the same problem and the solution for him had to do with the user.js file in the profile folder? Subject: config? In any case, the answer was to delete that file, or better yet delete all the text in it and save this file empty and set it to read only to prevent it from reappearing. That's all beyond me and my skinny computer knowledge and I don't even know if I have a user.js file. Help, please
My problem is now solved. I don't know if there's someone else out there who would do what I did, but just in case, I'll tell you at the end of the day, what was causing the multiple tabs to open every time I opened Firefox, at least as far as I understand. While I contemplated the helpful response more returned hoping to understand what was wrong with my Firefox, my son has shown out of town and 5 minutes, he found out what I did wrong. In Options > general > Home Page, I got an address which included not only the home page I wanted 'Google News', but apparently the addresses of all the other tabs this guarded appearance until when I started towards the top of Firefox. Maybe it's not exactly the right explanation, but change the homepage to "News.google.fr" solved the problem. Thanks to everyone out there who gave their best to help me, I'm sure it's hard to solve problems like that when he would never come to you that someone would do the things they do. Thanks again.
-
How to read data from the unit to acquire data with LabVIEW
Hello everyone, I'm new with LabVIEW and I need help. How to build LabVIEW program to read and store the data acquisition unit temperature data. the data can be any store such as Excel or a text file? Thank you.
Start passing by examples of LabVIEW. Go to help-> find examples. There are several examples here just for the analog input and then even more for logging data to a file. After that, show us what you have and we can guide you a little better that way.
-
ASA5505 does not not in the telnet session
We have an ASA5505 in a branch for IPSEC VPN at the main office. Telnet to the ASA5505 gives a message "could not open connection to the host, on port 23: Connect failed. The branch has access to the internet. Suggestions for be telnet to above firewall would be appreciated.
Using ssh remote acccess your ASA box is always the best way.
You can download and install a client SSH on your PC, like PuTTY, is a free software, you can get it at
http://www.chiark.greenend.org.uk/~sgtatham/PuTTY/
Or if you want more powerful SSH client, you can buy a SecureCRT.
Thank you.
-
Different results from the same calculations between SQL and PL/SQL
This SQL statement:
Gives the 89.5 result.select 1074 * (4 / 48) from dual;
However this PL/SQL block
Gives a different result:declare tmp NUMBER; begin SELECT 1074 * (4 / 48) into tmp from dual; dbms_output.put_line('Result '||tmp); end;
Result 89.49999999999999999999999999999999999996
If I change and give my variable tmp, a precision and scale, (38.36) say the result is 89.5.
Ed. I did about 10g (10.2.0.4.0) and 11g (11.1.0.7.0) with the same result in both.
Published by: kendenny on July 9, 2010 10:19 for more informationWhat is your current value of NUMLARGEUR in SQL * more (I assume that you use as your tool)?
SQL> set numwidth 50 SQL> select 1074 * (4 / 48) from dual; 1074*(4/48) -------------------------------------------------- 89.49999999999999999999999999999999999996
-
26.0 Firefox restore the tabs from the previous session.
Same problem they have had with 23.0.1; I had no idea of how to make some suggestions noted here, that is to say, go to config... going the help drop-down list gives not this option - now you know who you are dealing with when you give suggestions. Thank you, I would not use Chrome
Hello, try to re install firefox, maybe he'll settle the error I hope so...
-
Since the toolbar is not there, I can't do anything. I need print
This has happened
Each time Firefox opened
== I installed Firefox on Thursday, may 5, 10
You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
Press in and hold the Alt key to display the menu bar.
Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide. -
With the help of dynamically called screw in TestStand deployment
I write code to interface with a & Rohde Schwarz ZNB Network Analyzer. I use LabVIEW 8.2 and TestStand 3.5. For reference the ZNB driver is available here: R & S of ZNB Driver. I use a slightly older version of the driver, some before they needed to LabVIEW 2009. I am writing all the code on a development machine that has the full version of TestStand/LabVIEW and it works on another machine that has the TestStand deployment license.
This driver is dynamically linked to some things he needs. I am able to operate with simple LabVIEW EXEs but not in TestStand deployments. The following excerpt comes from their documentation, explaining a little about how the driver works and how to use in LabVIEW EXEs.
3.4.2 How to generate executables or libraries in LabVIEW driver kernel drivers instrument based on attributes is dynamically bound to any VI performed during execution. This can be recognized by the LabVIEW application builder. The LabVIEW application builder follows all the static dependencies and include them in the package distributed at the generation of an executable file.
To create an executable in LabVIEW, please manually add all the screws in the
\PREFIX \_utility\callbacks folder to the LabVIEW project. In the case of project based please add private to your project folder. With this reference manual, the driver core is included in the compilation and the driver core is accessible during execution. I can't get this to work in TestStand deployments at all. I can't even connect to the device since the VI Init has these issues. I get the same error for all the various attempts that I made. The same error is that when you add manually the screws for the LabVIEW EXE.
Error-1073807346
Property in Rohde & Schwarz Vector Analyzer.lvlib:rsidr_core_session_fgv.vi-> network node
Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_check_error.vi->
Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_attribute_write_int.vi->
Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_attribute.vi:3->
Rohde & Schwarz Vector Network Analyzer.lvlib:rsvna.vi:2->
Example 1 setting of the Instrument 24Default .vi:1->
Rohde & Schwarz Vector Network Analyzer.lvlib-> efault Instrument Setup.vi
Rohde & Schwarz Vector Network Analyzer.lvlib:Reset.vi->
Rohde & Schwarz Vector Network Analyzer.lvlib:Initialize.vi->
Connection of ZNB testing.VI
VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.
So far, I tried the following, all solutions producing this same error. I struggled with this and turned off for awhile then maybe there are other solutions attempts I forget.
(1) it looked like a lot of the report to go to the private folder were finished in SupportVIs. I manually pasted the rest there, too.
(2) I added all driver files on my workspace and included in the files with the rest of my deployed screws.
(3) I added all driver files on my workspace and said pilot TestStand to deploy them to the original location in Program Files.
Someone at - it ideas? R & S didn't even know what was TestStand, so that they could not help me.
I was finally able to solve this problem on mine, the other day. I brought the Network Analyzer to my office and did a lot of tests in this way. Eventually, I discovered that I needed to include the folder private pilot deployment, what I was doing in one of previous attempts. It turns out that you must also maintain the original of this file directory structure when you include it, otherwise dynamic calls are not looking in the right place. Once it worked on my PC, I got it on the machine test and worked as well.
Maybe you are looking for
-
Anyone know if it is possible start of SD in a Portege 2000.I don't have a DVD USB, I don't have a USB floppy, when I want to reinstall OS I take 1'8 "hard drive and my adapter for the IDE and reinstall the SO in another computer, but it's not comfor
-
I'm repplace the rear/top hood for a 15 HP laptop, model number 15 t-r160. It is blue. The customer has dropped and damaged about everything on the left rear corner (hinge, lcd screen, corner covers...) and the upper rear cover. The part # on the bro
-
TreeSize Professional - using this tool for the first time - need help to run the report
Using TreeSize Professional for the first time and I need search records to analyze documents containing invalid characters and path names that are too long. We are moving the content in SharePoiint and SharePoint will not accept path names that are
-
Problems connecting to the Inbox in Windows Live Mail email get "cannot display this page".
Experiencing major problems in email inbox but no other problems with internet connections. Internet Explore doesn't keep saying "cannot display this page" it has that started happening in the last few days and is produced also from other friends so
-
All programs opens in Notepad in the code
All my programs have begun to open in Notepad, after that I tried to start a game, Football Manager 2010. They all appear in the code and I can't open the vast majority of the programs at all, the only program that I am currently able to open's iTune