Frozen A1-07 tablet and cant turn off
as the title says. I was with my Tablet and just, it froze. None of the buttons do anything, the power button is not to do anything. is anyway to reset or fix it without having to wait hours for the battery to run out?
Thank you
Bryan
fixed now. After waiting an hour or so and then holding the button power for 10 seconds, its been the case, seems to be ok
Tags: Lenovo Tablets
Similar Questions
-
After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.
Possible explanation. It is likely that batteries, so fresh, can be irregular in size. The uncertain connection would therefore tend to lead to a failure to blink and you declare. Read my thing...
-
My Ipad air2 does not start. Tried hold it together switch with on/off switch. Apple logo appears for about 15 seconds and then turns off again.
Is there another way to start the IPAD?
Try the steps here:
-
my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help
Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.
Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/
-
G530 flashes like 6 times and then turns off
G530 earned months; "t lights up. Battery out and tried to turn it on with just power adapter and nothing happens. Battery put it back in and turned on only plugged while and battery lights up and blinks about 6 times and then turns off. Nothing on the screen not boot windows or anything like that?
Remove the battery and try to start your computer. If it works, replace the battery and try again.
If she does not press the 'power' for a few seconds, don't still no sign, contact lenovo support and ask for replacement.
-
Windows Firewall: I installed eset esmart security and it turned off my windows firewall
I installed eset esmart security and he turned off my windows firewall and itself has a personal firewall, I would like to know what does enter the windows firewall too or not?
Golden rule: one firewall for a computer.
On this basis: abandon the Windows Firewall.t-4-2
-
mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery
mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.
Hello
1. your wireless mouse does not work?
I suggest that you follow all the steps of the article which will help you solve the problemTroubleshoot a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122 -
Hey guys, I just reset my mac OX system and wiped and Adobe, turned off my computer. I can go through re install with you?
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked
.
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a way to go to a page to download the Adobe programs if you do not have a disk or drive
-Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
-Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
-
Portege A600 - SD reader disappears and cannot turn off WLAN
Hello
I have 2 problems with my a6001:
When I suspend or Hibernate, my sd player disappeared when my machine wakes up again... It's really disturbing when I run programs of it. eject and re - insert card does not help.
System Manager sd reader to disable and enable the work of sd reader, but I don't do that all the time.
This is the normal way that a toshiba works or is this a problem of my machine? any help?2:
with flashcard wireless I can turn off wifi (I barely use) but when I reboot it is again and again. Is it possible to change this default setting?Hey,.
1: have you already updated the card reader driver?
2: you can disable the wireless network adapter in the device for example Manager. Then the wireless network card is disabled until you turn it on in the Device Manager.
-
NB550D boots in black of the screen and cannot turn off even
I had my NB550D for only less than a month. I've updated the memory to 2 GB and the Op to Home Premium system, but nothing else. It's on auto update on security issues, and I remained with the McAfee protection which was pre-installed (and paid for a year).
All is well until a few days ago when you turn on, I just got black screen. Could hear the fan and disc well. Finally pressed the power button, nothing changed, has waited a bit, pressed again and it is off. When I pressed once again he came as usual. Used several times in the last two days and has been very well. Now today I get black screen again and can hear the fan. When subsequently, I pressed switch, I heard snoring disk but still black screen. Since then, tried pressing on/off switch from time to time but no change at all - can't turn off!
Anyone has any suggestions please?
Flingel
I read in another forum that the answer must take the battery (having already taken the sector) so it will die and then press on and press and hold power for 30 to 60 seconds. I had nothing urgent to do let him die naturally when the battery is missed rather than take out the battery when it was on. Then, I held the power button for 60 seconds, plugged in and turned on. It starts very well now, but of course I don't know a) the question of whether it is because I held the power button in 60 seconds and b) on the question of if same thing will happen again, so if anyone has experience of this behavior, I would be grateful for comment.
Thank you
Flingel
-
iPad does not turn on/just the Apple logo and then turn off again
I have an iPad, 4th generation, 64 GB with WiFi and cell phone, it is only 3 years and suddenly I can't turn on the iPad. When he started to act up it would freeze upwards with no icons or the button "home" in response, still on the screen, that he was freezing. I was able to restart it with the top button and it would work for 10-15 minutes and freeze no icons or the button being sensitive at home. I could do a hard reboot and when I rebooted, it would work again for 5-15 minutes and freeze once more. This was during a week and now it does not restart. When I try to turn on with the button at the top of the Apple logo appears, remains on the screen for about 3-5 minutes (no progress bar) and turns off again with no other screen appearing. I tried to find a solution online without success. Anyone have any suggestions for a fix for the iPad? I would appreciate any ideas that anyone could have.
If the unit starts to turn back on the wide, then it seems that if you have a hardware problem. If the unit is charged and a reset will produce only a short period of service, then it is a hardware error or an error in battery, which would be also considered to be material. You can try to restore the device to factory and test without adding any additional content. If it still fails, then make an appointment at the Genius Bar watching him.
Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support
-
WiFi and bluetooth turn off all
Hello!
You have the problem as topic. Thing is annoying because I use the bluetooth mouse.
When I'm not in wifi range and must use ethernet I turn off wifi in key.
Unfortunately, this also turns off bluetooth and my mouse no longer works.
How can I solve this problem?
Somehow configure this touch button?
BTW I uninstalled HP Wireless Assistant.
Thank you!
HP Pavilion dv3-2050ew
Windows Vista HP SP2Hello
Install new HP wireless Assistant here and next time switch to wifi with this program.
-
Continually resets mode sleep and display Turn off
original title: customization.
I feel constantly reset my "sleep mode" and "Turn off display", even if I did 'never' whether on battery or plugged in, in my folder customization. How can I fix it?
Read the info on sleep disorders in the tutorial above.
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Also read this tutorial; as well as the 'related links' at the bottom of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
treble buttons to quick launch keeps flashing on the screen and wifi turn off voltage
HP pavilion dv8 quick launch button treble keeps flashing on the screen and now and again the wifi turns off and I have to keep back on.
Hello
Unless you have already done so, download and apply the firmware update for the capacitive strip on the link below which is intended to fix this particular problem.
After the update has been applied, restart the laptop.
Kind regards
DP - K
-
Sharing files and printing turn off the coast
I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?
Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.
Maybe you are looking for
-
Ive fixed the date to 01/01/70 what I do?
Can someone help me please, I've been on facebook as usual and I saw this thing on facebook that says if you change the date of your iphone for the 01/01/70. There is a glitch, so I did and then when I did I turned on my phone and when I went to turn
-
Qosmio F20-149: remote control and Win XP pro
First of all, Hello and sorry for my English. My question is if it's possible to get the work of infrared remote control in windows xp professional. The only thing I can do is volume up & down, but good... for sure that I have all things... like skip
-
Satellite L300D do not detect ODD and HDD
My laptop does not detect an optical device and the hard disk?
-
So basically, I bought an iPhone 5 c about a year and half ago. (as the last third of the year when it came out) I had the Apple EarPods I've ever used, kept them in the packaging. However, after I started to use them much, but then, towards the midd
-
Automatically open the change step where drag and drop a steptype
Hello I would like to open (launch) Assembly step (labview module) when I drag and drop the step type. TestStand can step edt by the 'Edit' button or shortcut (Ctrl + E). Is it possible to do? I know that shortcuts are hardcoded... Thank you for your