FS-85USB pedal for Digital Voice Editor

Similar Questions

• Digital Voice Editor 3.3.01.11240 runs very, very slow

  Win XP Professional SP3 on Dell Lattitude E6430

  Just acquired an ICD-PX720 and loaded the software. It runs incredibly slow - it's unusable. I had it in a docking station with extended desktop runnimg monitor. See the note about that is a problem;

  I removed the laptop docking station, and it worked a little better. Any suggestions?

  Hello Bob,

  Perform the below mentioned steps and check if it rectifies the problem.

  1. Uninstall all versions of the DVE software.
  
  
  2. Reinstall the most recent application software DVE.
  
  
  3. Disconnect all external drives that are connected to the computer and then restart the DVE software.

  Note: The DVE software allows to detect any player who is a mass storage device when it finds a voice file. Other installed external USB devices can affect the operation of the software DVE, causing the software to stall or stop responding.

  If the problem persists, you can contact Sony support using the link to the below additional troubleshooting steps.

  http://eSupport.Sony.com/us/p/support-contacts.pl?MDL=ICDPX720&loc=3

  If my post answered your question, please mark it as an "accepted Solution".

• Think about making one for the voice recording...

  I've heard great things about the new Sansa Clip +. However, I got a Sansa Express before. It was so horrible, it makes me a little skeptical on the Clip +. One of the most horrible attributes of the Express was the refresh database which came he started, taking over 7 minutes, if it didn't cut itself automatically to every time (I had to click a button to keep it close). But before all the music. For some strange reason, he would play only half of my music. Perhaps the tags have been stripped, very well. But he should be able to play without worrying, because it worked on my computer and other mp3 players.

  Sorry for snapping, but I am in desperate need of an mp3 player. I'm quite the cheap fellow; I also need a digital voice recorder voice that will work in 10-15 (never passed 20) feet. I have an old burner, but it is a consumer of battery. I can not connect to my PC.

  Now, on the mp3 player, it looks like the clip + has firmware similar to that of the Express, but cleaner and better. I saw the review and startup does not seem to be problamatic. However, I leave again I tested the voice recorder on my Express to a 15 ft. He picked up a bit of noise, but I had to max volume out to distinguish what has been recorded (which I couldn't still do).

  I really want the clip to be all around the device, I need, but he would need to work sufficiently to 15feet. I've heard so many comments, but virtually nothing about its features shortly. I really want to do, but Sansa has already failed me once...

  Hello Soy. You don't like how I answered your questions on the ABI plateau? Also, I'm very cheap, but decided to splurge on a Clip + even though I already had a rocket and a Clip. To be quite honest with you, voice recording is the function of quality lowest on the Clip + Clip and Fuze.

  I just tried to save it to my Clip + voice. I just tried two records in the sample. With the player only about 4 feet away, she picked up a lot of noise from a fan in the room. IMO to about 15 feet below the record would probably unintelligible if there is a fan noise or other noises in the room. The speech on the video recorder + works best at short distance from the speaker. Cut out from the rear of the speaker, it can make acceptable recordings.

  It is doubtful that you would get a great record with any player of mp3 of 15-20 feet away. The recorder I've mentioned, Member of the Board can be set to be very directional, but despite this, 15-20 feet away would be a mistake to get a decent record.

• Can I use a digital voice recorder Sony with windows vista, speech recognition?

  Original title: recognition of Windows Vista SP2

  I recently bought a Sony digital voice recorder to record meetings. Is it possible to use speech recognition with this device? I downloaded the files to the MP3 format.

  WAV files as input for speech recognition?
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5eb86a60-4b91-4687-A2DD-e50ad792c5d8

• email an mp3 file. (recorded on a digital voice recorder... personal folder. Comcast. says the file is too large (1.4 MB)

  I'm trying to e-mail a personal voice recording on a digital voice recorder.  Google and Comcast rejected the message, indicating that the server of the recipient (Comcast) has rejected as too grand (1.46 MB) of the suggestions?

  I'm trying to e-mail a personal voice recording on a digital voice recorder.  Google and Comcast rejected the message, indicating that the server of the recipient (Comcast) has rejected as too grand (1.46 MB) of the suggestions?

  =====================================
  1.46 MB isn't a very large file... I think the Comcast
  limit is something like 10 MB. The problem may be with the file
  format... try to rename or compress the file and see it done
  a difference.

  Example... If the name of the file has been voice.exe replace voice.jpg
  and to inform your recipient to change back before playing.

  Another alternative would be to download the file on the following
  the site and send the download link to your recipient:

  "SendSpace.
  http://www.sendspace.com/

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Digital telephony Editor 3 install on Win7, but doesn't work

  I installed the software for this digital voice recorder, Sony ICD-P620, several times on several different computers.  He has always worked beautifully until the attempt to have it on my Windows 7 computer. I get a message of successful installation, but when I go to run it I get this message:

  Failure in the starting MSVoice. (0x000003f0): an attempt was made to reference a token that does not exist.

  and it will not open or run. It is stuck there. Also, I went to the site and downloaded a version made for Windows 7 with the same result.  I really need this software to unload my hours and hours of records to prepare for my exam mid-term Monday!

  Have you tried right click on the shortcut or the .exe of the program and selecting the option "Run As Administrator"?  If you decide to reinstall the program choose the option even on any Setup.exe.

  See if something is causing a problem for this program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• Sony digital voice recorder ICD 520, windows 7

  Can someone point me to a solution using a digital voice recorder Sony icd 520 with windows 7, is there driver for this patch?

  Hi joescrim,

  I found the following link on the Sony site with necessary additional software/information on what makes your compatible devices:

  http://support.Sony-Europe.com/DNA/compatibility/Win7/dna_win7.aspx?site=odw_en_GB&m=ICD-P520

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Olympus VN - 480PC Digital Voice Recorder Media Player not working, receive error message: "no driver file found." » »

  Original title: Olympus VN - 480PC Digital Voice Recorder Media Player

  I recently bought a new computer from DELL (Inspiron ONE 2320 with Windows 7) desktop and I connect my Olympus VN-480PC Digital Voice Recorder Media Player with the PC (to download recorded files), but it does not work... "no driver not found file.." After some trial and error I find Olympus webbsite and find appropriate... but then it won't... they have a problem at Olympus and cannot deliver a driver file... I tried 2 or 3 times in the last 6 hours... what to do? Can tell you Ms them the probem? Thanks in advance...

  Hello

  Are you running the 64-bit or 32-bit operating system?

  If you use the 64-bit operating system, you can try to download and install the drivers from this link and check that it works.
  http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?ID=1175&OS=w

  If the problem persists, please contact Olympus. As they develop device drivers for their hardware, they can help you with this problem.

  http://www.Olympus-IMS.com/en/support/

• How to add: subtitles encoded for digital television.

  original title: subtitles encoded for digital television.

  Am able to get subtitles for analogue tv but not digital. How can I organize it so I have captions on digital television too?

  Hello

  Turning on the closed captioning is the same for all types of live TV: in Media Center, go to tasks, settings, TV captioning and change the legend display option you like.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I use a digital voice recorder with windows speech recognition

  I want to use a digital voice recorder to transcribe in Windows Vista or windows 7 speech recognition. So far, I only got responses like 'Use Dragon'. I don't want to use Dragon! I want to use my trained and perfectly good windows Vista or Windows 7 built into the software. Please, anyone, just a direct response. I will buy from any digital voice recorder can transcribe Windows.  I am well aware that I can use dragon so please don't keep advise me. I travel a lot and do not always have access to a pc equipped with dragon or tablets. But I still have windows vista or windows 7 built in. Would be very happy a good answer (and any settings if necessary >) thanks guys.

  Hello

  I suggest you check with the Windows Compatibility Center, to check what digital voice recorder is compatible with Windows 7 and Windows Vista, since the following links and you can use these digital voice recorders.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=digital%20voice%20recorder&type=hardware

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=digital%20voice%20recorder

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Digital voice recorders

  East-digital voice recorder Olympus VN - 480PC Media Player compatible only with Windows 7 digital Dictaphone?

  You will need to get a name and a model, go to the manufacturer website and search to see if it is compatible. Microsoft cannot and does not maintain a list of compatible products windows 7. Too many. Frenchie

• What plan is best for digital drawing

  Hi all!

  I was thinking through a plan of Photoshop. I learn the drawing right now and so I do not know which one to choose. The foreground costs 12 euros, the second 29 I guess - first is full of Photoshop? Or just to Lightroom? It is said in the "Photography" title, but I want to use it mainly for digital drawing. What is your opinion on the matter?

  Thank you

  Hello

  Greetings!
  Plan of photography includes Lightroom and Photoshop.

  If you do not use illustrator then this plan is best for you.

  Concerning

  Jitendra

• Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is most of time consu

  Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is the longest part of the process, then I would be able to automate it.  Any ideas?

  This is the worst absolute way to embed fonts for PostScript through deletes dynamic transparency, color management, bookmarks, hyperlinks, etc. Yucck!  You are in many ways to ruin the files, do not clean them.

  Acrobat Preflight has a correction for embedding fonts. Takes only a few seconds per file PDF. And if you have a bunch of these files, you can create an action to do this.

  -Dov

• Incoming audio levels can be adjusted for digital video capture in Premiere Pro?

  Incoming audio levels can be adjusted for digital video capture in Premiere Pro?  Or is the audio in digital images a fixed entity that cannot be adjusted once it is imported into an editing software?  Recently, I have captured 14 hours the Strip that constantly weak but usable audio levels.  I couldn't see a way to set audio levels in the capture Panel, so I just left with just the default settings.

  It is possible that the lessee of his experience on the production has been conservative with its levels; they constantly peaking at nearly 9 meters of first, instead of more desirable 12.  But because they are so compatible, I wonder if I missed an option to set audio capture of levels when I did the band.

  The levels are defined. In the way - 9 on the first meters are stronger than-12

• Pro or Standard for digital signatures

  Do I need Adobe Acrobat Pro or I can use Adobe Acrobat X Standard for digital signatures enabled for users of Adobe Reader file.  So far, Standard X does not work for files on the player.

  Do you need Pro.