FSX and FS9 does not start

Similar Questions

• Automatic update failed, and Windows does not start

  I am running Windows 7 and it does not start. Automatic update started as soon as my computer is awakened from his sleep. It closed several programs. The update had completed 30% when he stopped to restart the computer. As windows began, I got a blue screen message telling me that it didn't start. I tried to restore the system at two different times, but both failed. I'm not sure that I can do.

  How do access you the system restore?
  If through the repair of this selection of the computer in the Safe Mode menu - have you tried to use the Safe Mode?  If so, what happened?

  While waiting for a response, please try these free diagnostics, bootable: http://www.carrona.org/initdiag.html

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• I get this error message and Firefox does not start... EXC in ev handl: error: error definition property on NPObject!

  Firefox does not start and this message keeps coming back... I uninstalled and reinstalled... but nothing helped...

  EXC in ev handl: error: error definition property on NPObject!

  Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

  • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
  • Do a Google search without problem
  • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.

• Portege M800 - noise and HWSetup does not start

  Hello

  I use a Portege M800-116 under XP - SP3.

  Problem 1:
  Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
  As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

  Problem 2:
  Files WAV or MP3 recording with internal or external microphone produce mediocre results.
  The resulting files include a high level of high frequency noise and hum static.
  Connect the power supply increases the problem.

  Comparing the quality of the recording and playback with my old confidence Portege M100:
  My M800 is one not only of poor quality - it's plain unusable.

  Problem 3:
  Toshiba HWSetup does not start from the control panel.
  Have you tried the ONU - and re - installing nothing helps.

  Thank you for guiding me towards a solution.

  Concerning
  T

  Hi, fly,

  I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

  You have 3-pin or 2-pin AC/DC adapter?
  As far as I know in this case you need 3-pin AC/DC adapter and power cord.

  You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

• XP labors heavily and Will does not start (sometimes even in safe mode.) "And if it starts in the DM, it will freeze when I try to enter to change anything).

  I have a XP computer. During use, the power supply cord unplugged and computer is dead. When I tried to restart it, it will go to the blue screen with an error, go to the screen that asks if I want to start in safe mode. It does not start in normal mode, but it does get my wallpaper and stay there. Sometimes Windows XP screen and stay there. It really starts to make a lot of noise when one of these things happens. Don't know what to do. I have a XP OS disk Dell provided with the computer. Any ideas?

  Repair the Windows XP installation - you should have all your files intact.

  A repair install will replace the system files with the files on the XP CD used to the repair facility. It will leave your applications and settings intact, but Windows updates will have to be reapplied.

  http://michaelstevenstech.com/XPrepairinstall.htm

  Good luck.

• I changed my motherboard and now does not start LR

  I changed my motherboard (PC Win 7) and 6 LR does not start

  I need to download?

  I have to start LR 5 and proceed to 6 LR?

  Thank you!!!

  Franco - Italy

  Hello

  Yes you are right.

  You will need to load it again.

  Please see Download Photoshop Lightroom if necessary.

  Kind regards

  Sheena

• 6 Lightroom will not create a catalog and therefore does not start

  Installed 6 Lightroom on a Windows 8.1 System. Provided with a serial number, but he complained that I need Internet access. Internet worked very well, so I chose to connect later. That is at least 8 times. Now when I try to run, the icon appears on the taskbar but it stalls. When I hover over the icon it shows a thumbnail of the screen to create a new catalog, but it will never develop the screen. The only option I have is to close the small window with a right-click. Then I start again and it's the same - no possibility to start Lightroom even after a reboot, then a re - install! Can not yet return to the fake my serial number validation attempt.

  I decided on a variation of your suggestion. I uninstalled and then download the latest version of Adobe's CC. However, the same problem persists. So, it was now time for some lateral thinking! Since the start-up became not even the creation of Catalog screen, I thought something was wrong there. So I grabbed a laptop, installed Lightroom and then copied the file Pictures\Lightroom on my desktop PC. It worked! Now Lightroom works well. I have to do is enter my serial number and it does not look back

• One migrated from my virtual machine to another host VSphere and it does not start

  I have a virtual machine that I've initially converted to Hyper-V to host VSphere. After I did it would start very well, but I got up two errors when starting.

  "An IDE controller is found but the VM does not support the option" and

  "A plate supporting the option not found."

  When I looked at the hard drive in the settings it looks like it is not supported. Is it because I badly converted to Hyper-V to VSphere using VMWare Converter?

  But now, I configure VCenter Server and tested a migration of these machines to another host and using the VSphere Client. It does not start now. I get an error message that says.

  "Device 'drive hard 1' uses a controller that is not supported." This is a general limitation of the compatibility of the virtual machine with the selected host ESXi version. »

  Remember that it is the same VSphere host it is running on initially. Any suggestion would be appreciated.

  If it works now - is that correct? n ' forget not to award points useful and/or correct

  I removed these entries;

  ide0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
  IDE1:0. Present = 'TRUE '.
  IDE1:0.clientDevice = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-raw"
  IDE1:0.startConnected = "FALSE".
  ide0:0. Redo = «»
  IDE1:0. FileName = ' / usr/lib/vmware/isoimages/windows.iso '.
  scsi0:0. DeviceType = "scsi-passthru.
  scsi0:0. FileName = ' / vmfs/devices/cdrom/mpx.vmhba1:C0:T0:L0 '.
  scsi0:0.allowGuestConnectionControl = "FALSE".

  And added to them;

  ide0:0.clientDevice = 'true '.
  ide0:0. DeviceType = "cdrom-raw"
  ide0:0.startConnected = "false".
  scsi0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
  scsi0:0. DeviceType = "scsi-disk" hard
  scsi0:0. Redo = «»

  Although there is a high probability that the other six you have to do will be similar to this, they will have to be assessed individually and modified accordingly.

  See you soon,.

  Jon

• CC of the Illustrator and CS6 does not start in Windows 8.1 Overview

  When I try to run Illustrator on my overview of machine running Windows 8.1, I see this error message (in Spanish because my system language and software are in Spanish):

  Error

  Esta application none are compatible only real con el idioma del operating system. El Abra Panel control "options regional idioma y ' in el menu Inicio de Windows.

  This application is not compatible with the language of the operating system curren. Open the region and settings in Control Panel on the Windows Start menu.

  I tried switching to Spanish (Spain), Spanish (United States), English (United States) and Spanish (Chile), with no result.

  A fix was posted at: http://helpx.adobe.com/illustrator/kb/illustrator-does-not-start-windows-81.html

  We apologize for the inconvenience caused.

  Thank you

  Sliman

  Adobe Illustrator team

• 1410: HDD password appears and Windows does not start

  in a 1410 out of the blue sundendly apears a message PASSWORD HARD drive and windows will not start how to solve the problem?

  Hello

  He password disk HARD is not removable without knowing the old password of HDD.
  If you n t know this password for the HARD drive is locked and it s not possible to use it.
  Unfortunately there is no other possibility

• I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

  I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.

  Hello:

  You need to get a USB to SATA 2.5 enclosure "HDD.

  Have you thought about the plug of hard disk drive?

  The thing that looks like this?  That is removable. Just shoot.

  

• Windows Help and support does not start

  Windows Help and support will not start. I get an error that sent me to the web site for help.

  Hello

  The 1st should help solve the problem, and the others are just in case.

  How to fix the Windows Vista Help and support
  http://www.Vistax64.com/tutorials/87497-help-support-Vista.html

  Windows Vista and Support help pages do not display correctly
  http://www.Winhelponline.com/articles/194/1/pages-in-Windows-Vista-Help-and-support-are-not-displayed-correctly.html

  "Help and support error" - Service not started
  http://WindowsXP.MVPs.org/Helpsvc.htm

  Difficulty of support and Windows Vista Help
  http://www.Windows-now.com/Media/p/36567.aspx

  I can not open Help files that require the Windows Help program (WinHlp32.exe)
  http://support.Microsoft.com/default.aspx/KB/917607

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Update of Lightroom 6.5 is useless! Will not open requires permission changes and still does not start!

  Updated to 6.5 and it does not open!

  Changes in sad authorization required but when do just shows the same problem.

  Basically does Lightroom non-ouvrantes!

  No support at all on the website!

  Hi corywright,

  Please change the permissions for the sub files adobe specifically.

  1. / Library/Application Support/Adobe
  2. ~/Library/application support/Adobe

  Reference: OS X El Capitan: set permissions for items on your Mac

  If the steps above did not help, then I suggest to uninstall Lightroom 6.5, restart the machine and install Lightroom 6 and then install the updated to 6.4.

  DOWNLOAD: install Photoshop Lightroom

  Updated link: http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeLightroom-6.0/6.4/setup.dmg

  Kind regards

  Mohit

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.