FTP .txt file copied correctly the cRio

Similar Questions

• I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. »

  I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. "I have no office and nothing showing where would the office.  Help, please! I ran a spyware/malware pogrom, but no help.  I tried the "command Prompt" and %windir%\system32 using the cd but did not work.  I also used a DLL problem progrm difficulty but no help.  I'm running Vista SP2 and have no taskbar, no start menu and nothing shows up on the desktop.  I can get on the internet, but in a roundabout way.  I tried several solution on the Microsoft web site, but no help. I did a restore but no help.  I don't want to lose all my photos and documents HTML if possible.

  Hello
  Thanks for your reply but I had tried the System File Checker with no luck.  Finally, I replaced the hard drive, because after several attempts, I reached a point where I had the format of hard drive, but the main area where all my data were not could be formatted. I think a virus may have lock me up.
  To date, May 22, 2012 the system works with the new hard drive.

  Thanks to everyone who gave suggestions.

• Reading data from txt file and move the engine for the data

  At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. and the treatment will be repeated after completing the first point

  Hey, the Index Array function may be what you are looking for. Here is the link to the documentation for this function.

  Function table index

  https://zone.NI.com/reference/en-XX/help/371361L-01/Glang/index_array/

• export the query to txt file, cannot open the help URL

  Hello
  All the
  I need export a query to txt file
  I search on this forum and found a a thread can solve this problem
  But I can't open this URL.
  < div class = "jive-body of the message" > < div class = "jive-quote" >
  
  http://spendolini.blogspot.com/2006/04/custom-export-to-CSV.html
  < / div >
  Can you kindly send that content on export txt to my Email?
  
  My email is: [email protected]
  Thank you very much.
  
  Saven

  item sent via gmail...

  Thank you

  Tony Miller
  Webster, TX

  There are two types of pedestrians - the living and the dead.

  If you answer this question, please mark the thread as closed and give points where won...

• Import data from txt file and name the channels

  Hello

  I want to import data from a file txt (see attachment). Well well, no proplem, but I want to also read the information on the channel names and units and rename the imported channels. Is it possible to do? It is also important that the number of channels may vary.

  Can someone give me some examples of code?

  Thank you very much

  Gabriel

  Hello Andreas,

  Thanks for your work. I'll adjust the code.

  Gabriel

• Attempt to create run time (dynamic) table and insert the data in this... The entrance is a flat file (txt file) which has the numbers and strings... I'm trying to convert them to a string and insert into the table. It is a matter of urgency for me please

  create or replace procedure Dynamic_Table AS

  iVal VARCHAR2 (32);

  iTemp varchar (200): = ";

  sql_stmt VARCHAR2 (200);

  l_file1 UTL_FILE. TYPE_DE_FICHIER;

  l_file utl_file.file_type;

  BEGIN

  l_file1: = UTL_FILE. FOPEN ('TEST', 'dinput.txt', 'R');

  EXECUTE IMMEDIATE ' CREATE TABLE baseline (Item_ID varchar2 (32))';

  Loop

  BEGIN

  UTL_FILE. GET_LINE (l_file1, iVal);

  EXECUTE IMMEDIATE ' insert into baseline values (: ival) "using ival;

  EXCEPTION

  WHEN No_Data_Found THEN EXIT;

  While some OTHER THEN dbms_output.put_line (SQLERRM); * /

  END;

  end loop;

  END;

  You are approaching this the wrong way.  Create an external table based on the file.  External tables are CSV, fixed width data in a queryable table.

  You will need to create an oracle directory to put the file in (MY_ORA_DIR) I leave it for you to do, and then perform the following...

  create table BASELINE)

  ITEM_ID varchar2 (32)

  )

  EXTERNAL ORGANIZATION

  (

  TYPE ORACLE_LOADER

  THE DEFAULT DIRECTORY MY_ORA_DIR

  ACCESS SETTINGS

  (

  RECORDS DELIMITED BY NEWLINE

  LOGFILE "dinput.log".

  BADFILE "dinput.bad."

  NODISCARDFILE

  FIELDS

  (

  ITEM_ID

  )

  )

  LOCATION ("dinput.txt")

  )

  REJECT LIMIT UNLIMITED

  /

  All the dubious records appear in dinput.bad. Dinput.log will give you information.

  External tables are read-only, so once you set up your file, you can create editable as a normal table.

  create table ITABLE_EDITABLE as

  Select * from BASELINE

  /

  Work done, a few lines of code.

• IDCS6 MACOSX JS: data merge multiple txt files one after the other

  Hello everyone.

  I have a situation where I have to data merge multiple text files to a single file indesign real "base". Databases formats are the same, the point of difference is a code in the second field of the database that refers to a postal box (not a zip/postal code, a code of 'distribution center' that has possibilities of 56 or greater). I would prefer data merge a file and then somehow split the PDF via Acrobat, but the length of postal areas resulting is incompatible and something that cannot be done if the document "split" feature in acrobat.

  The database starts as one massive file but using a one line code, can be divided into postal areas in separate text files.

  My last question: is it possible data merge several files at the same time (for example one after the other) and to give them their names based on the names of the input text file?

  OLE Kvern had a script to merge the data to a file without the user interface. I changed the last line slightly so that it generates a PDF file based on [high quality]:

  if(app.documents.length != 0){
          var myDocument = app.activeDocument;
          app.dataMergeOptions.removeBlankLines = true;
          //Select a source file.
          var myDataFile = File.openDialog("Select a data file")
          var exported = "file location(redacted for the sake of this post)"
          if(myDataFile != ""){
                  myDocument.dataMergeProperties.selectDataSource(myDataFile,);
                  myDocument.dataMergeProperties.exportFile(exported,"[High Quality Print]",);
          }
  
  }
  

  I guess that the answer has to do with the variable "myDataFile" and rather than just being open a dialog box, it could be somehow by selecting a table of text files, but it is where I am out of my depth.

  Ideas or thoughts which may not involve trying to do both the many mergers, but can somehow revolve around a great fusion of PDF?

  Thank you very much

  Colin

  Since writing my last response, I realized there was a better answer. It is a scenario of Peter Kahrel and a modified version of a script by Olav Kvern. Details can be found here: batch of merge data | Adobe Community

  I have since made other mods to the script is easier to understand:

  if(app.documents.length != 0){
  // make sure to use the document that is open
          var myDoc = app.activeDocument;
  // get the name of the document that is open for future naming purposes
          var myName = myDoc.name
  // get the location of the folder that contains both the indesign files and the text files
          var myLocation = "FULL PATH LOCATION OF FOLDER CONTAINING TEXT FILE AND DESTINATION FOR FINAL PDFS"
  // define the names of the data files to use based upon the names of the indesign files
          var myImport = myLocation + myName + ".txt"
  // define the names of the data merged PDFs to be created
          var myExport = myLocation + myName + ".pdf"
  // the actual engine for the merge, including DM instructions such as remove blank lines, object fitting etc.
          var myDataFile = myImport
          app.dataMergeOptions.removeBlankLines = true;
          if(myDataFile != ""){
                  myDoc.dataMergeProperties.selectDataSource(myDataFile,);
                  myDoc.dataMergeProperties.exportFile(myExport, "[PDF/X-1a:2001]", );
          }
  
  }
  

  If this script will automatically merge a file which is open as LONG as the data file is the same name as the indesign file with .txt at the end for example

  Woodward.indd (indesign file)

  Woodward.indd.txt (used for merging text file)

  This script does still not the original memory and who was using an indesign document, to browse for many text files and merging of PDF based on text files.

  HOWEVER, I am sure that the answer to that is based only on the use of the script above (no need to Peter batch convert script) and changing the line 9 to be a loop for... but again, this is where I come to a grinding halt. Any help would be appreciated.

  Colin

• files copied to the CD in Vista appear in 'read only' on Windows XP

  Were copy of a document written on a desktop with Vista on a CD.  When inserted in my Windows XP laptop, it appears as a 'read only' document and I can't type or make changes.  What I am doing wrong? Save me it is bad, they are not compatible systems?  Any help is appreciated, also please answer as if you were talking to a student of 3rd because it's on the level of my computer knowledge.  Thank you!

  Thanks for your help, but I thought about it before you replied.  Here is the solution to my problem: my microsoft office 2003 trial period had expired and I was able to read the documents that I had copied to CD. I kept getting the message: unauthorized modification because the document is locked. I googled the trial office free microsoft downloads, download Microsoft Office 2007 trial version and now have free for a few months. The entire document is now in the format of some because it was written (in Microsoft Word Office 2007) and I can edit and add to the document.  Finally, I have to pay for it, but at least my problem was solved!

• Import data from txt file with the reading of the names of columns

  Hello

  After changing the export of my simulation program, I can't use the postet heresolution, that works well. (I mark the message as hailed this is why I run a post only)

  Can anybode if you please tell me how to fan the code to import the new txt file type. The names of the columns here are FOA online first columns, like this (with ignoring the first lines).

  Hello Gabriel

  You can use the use wizard (Navigator > file > use wizard) to define a new filter to import file for your data. It will take only a minute.

  Please find the uri of the file that I create for you. Copy the attached file in your disk, unzip it and double-click the file uri.

  Then you can open your file by using 'open with '.

  Hope this helps

• Extract strings in the tdms files and write the strings in the file txt or lvm

  Hi all

  I'm struggling to extract strings from a file of tdms to write them in a txt file.

  The strings were written in tdms is a time stamp data recorded to a compact RIO.

  I put the chain in a different group from the PDM, but when I use the function read tdms with the group name, as I said, an error message is always take place.

  Thanks for all the help.

  PS: I have attached an example of tdms file I got over here.

  Kind regards

  Yifeng

  I tried your attached file and it seems that everything goes file. I have attached the screenshot of my VI here, what do you want?

  

• reading the timestamp column in the txt file

  Hi pros labview

  I work with labview 8.6 for about 1 week and I need help in reading txt files.

  the textfiles that I read have 2-11 columns.

  the first column shows the time and others show different channels where I measured the voltages.

  It is therefore no problem with reading of the voltage-columns and put it on the y - axis to a chart of the vi but I can't the time on the x-axis column.

  I took the basic "read file.vi" and it has changed a little according to my needs.

  hope you can help me, getting time on the x-axis column. (perhaps with a xy chart?)

  the vi and I have to read txt file are attached...

  Here is an example. The formatting of the x axis relative time will now do something.

• How do I sort the rows of the table that belongs to the same name and save the .txt file?

  Hello

  I am facing a problem, I read the .txt file that has several lines and columns.

  Third column represents the name of the group, as Group 1, group 2 and group 3. attached .txt file in the annex.

  I wanted to generate the wise group .txt file, as all the raws that 3rd element name group 1 must be in a .txt file and all lines that has 3 name group 2 element must be a .txt file.

  I hope that I explained my problem.

  pelase guide me how can I have the solution for this problem.

  Thank you much in advance.

  Kind regards

  Ankit.

  I have provided a simple example that works.  Feel free to use any method best suited to your needs as there are already several good ideas on this thread

• Can not read the word file copied as a shortcut on a disc

  Format microsoft word copied as a shocut on a disk is not able to be read. An error message appears that the network connection or the driver that the shortcut refers to is unavailable.

  Please excuse my rudeness and gaiety that, but everything that you copied is the shortcut, not the file. If you attach the drive to your PC, it will find the file because the shortcut will direct you to the source file, but if you try to play the file on another PC the source isn't there.

  If you do not know where the file is stored pass on the original PC, right click the shortcut and go to properties and it displays the path of the target, because it is a Word file, the entire file is probably in the Documents. In the same box, you should be able to target location or find to open the file. When you locate the file copy on the external drive.

• Save the contents of the form elements in a txt file

  
  Hello

  I am trying to save the contents of the form to a text file by clicking on a button. For example, in my form, I have 4 text boxes

  1. client code

  2 Subscriber

  3. customer name

  4. customer name

  There is a backup button in the page. Once I click on save button, I get a download prompt to save the file (txt file). The txt file must contain the values of the fields in each line. Can we achieve using Apex?

  Thank you

  TJ

  Hi TJ.

  Yes, its possible. For this you must use a bit of PL/SQL Code.

  In the page, you create a branch;

  Branch point = to present: after the treatment (after calculation, Validation and treatment);

  Type branch = branch of PL/SQL procedure

  And the branch code, you have to have something like this:

  declare

  CLOB v_clob;

  v_blob blob.

  dest_offset NUMBER: = 1;

  offset NUMBER: = 1;

  amount INTEGER: = dbms_lob.lobmaxsize;

  blob_csid NUMBER: = dbms_lob.default_csid;

  lang_ctx INTEGER: = dbms_lob.default_lang_ctx;

  caveat INTEGER;

  V_LENGTH NUMBER;

  Start

  DBMS_LOB.CREATETEMPORARY (v_clob, true);

  DBMS_LOB.CREATETEMPORARY (v_blob, true);

  v_clob: = ' ID: ' | : PXX_ID | »

  Geographical area: ' | : PXX_LOCATION | »

  First name: ' | : PXX_LAST_NAME | »

  First name: ' | : PXX_FIRST_NAME;

  DBMS_LOB. () CONVERTTOBLOB

  v_blob,

  v_clob,

  amount,

  dest_offset,

  offset,

  blob_csid,

  lang_ctx,

  (caveat);

  V_LENGTH: = dbms_lob. GETLENGTH (v_blob);

  --

  -set up the HTTP header

  --

  owa_util.mime_header ("application/octet ', FALSE");

  -set the size so that the browser knows how to download

  HTP.p ("Content-length: ' |") v_length);

  -the name of the file will be used by the browser if users only one save as

  HTP.p ('Content-Disposition: attachment; filename = "download.txt" ');

  -close the headers

  owa_util.http_header_close;

  -Download the BLOB

  wpg_docload.download_file (v_blob);

  end;

  See you soon

  Carlos Pereira

• Add the new hard drive in a txt file

  Hello

  I have list of virtual machines under 'cluster1' and there are specific VMs on a txt file and add thin secondary 10 GB to those virtual machines.

  New disks will be created in the data store: DATASTORE1

  Cluster_name: Cluster1

  Can you help me on this. Thank you.

  Get-Content C:\VMs.txt | %{
    $Cluster = Get-VM -Name $_ | Get-Cluster | Select -ExpandProperty Name
    $dsname = "DATASTORE1"
      }
  
    New-HardDisk -VM $_ -CapacityGB 10 -DiskType Flat -Datastore $dsname -StorageFormat Thin
  }
  
  

  Try like this

  Get-Content C:\VMs.txt | %{

  Get-VM-name $_.

  New-hard disk - CapacityGB 10 - flat DiskType - data store "DATASTORE1" - StorageFormat thin

  }

  If the TXT file contains all the names of virtual machine, there is no need for the cluster.