Full drive C on Vista

Similar Questions

• Runnning BACK full screen in Windows Vista

  I try to open and read some of my old school games, but I am unable to get the screen BACK to run full-screen mode.  I have no idea what to do from here.  I think I'm under the 32-bit version of Vista.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  The problem occurs because the Windows device drivers support all video modes BACK running. Windows device drivers are based on the Mode operating system display driver. You must contact the manufacturer of the driver or display adapter to get help.

  Link for reference: 16-bit command prompt and BACK Some programs won't work in mode full screen in Windows Vista

  http://support.Microsoft.com/kb/926657

  For more information you can visit the link to the forum below.

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/043e6633-0799-4fa1-97BF-3f7dfc6885be

  Hope this has helped

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Restore factory settings doesn't work does not and did not reinstall Vista drive, download Windows Vista Home Premium

  Original title: Vista

  I need to re download windows vista home premium because: 1-workstation is not come with a disk and 2 - my system back to factory settings does not work

  Hello

  Here are the different methods to reinstall Vista; See suits you the method...

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have no media, but I have a product key for Windows Vista. Where can I get another drive in Windows Vista without having to pay for it?

  Mssing Vista

  I bought a pc where it allows to be on Vista, the licens sticker is still on the pc, but I don't have a dvd, is anyway I can get Vista on back the pc without having to buy a new license?

  Hello

  You don't need a new license.

  Here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you never received a recovery disk when you bought / got your computer it should / can be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Photosmart C7250: Driver for Windows Vista

  My Photosmart C7250 worked well until two days ago.  Then, it would not scan a document.  Tried to uninstall the driver, who seemed successful.  Then at HP.com, but did not find the driver for Windows Vista.  Used the original installation disc, but that doesn't seem to help.  How can I get the current driver for Photosmart C7250 for Windows Vista?

  Hi @OldC7250,

  Welcome to the HP Forums!

  I see you are trying to find the driver for Vista for your HP Photosmart C7250. I'm happy to meet you!

  To download the software, please visit this site, HP Photosmart C6200, C7200 and C8100 all-in-one software full function and drivers.

  If it still does not after reinstallation, please give our HP print and Scan Doctor a try and let me know what happens!

  Hope this information is useful and thanks for posting!

• 4.8.0.0Update1214 driver Conexant Audio Driver for Windows Vista

  Who has already install vista 64-bit can tell me what this driver for vista 64-bit?

  Update driver Conexant Audio Driver for Windows Vista 4.8.0.0 1214

  I put t know exactly if it of true but some P100 camera supports the audio chip Conexant CX20551-22.
  If you are looking for the Vista 64 bit driver you must search for the driver that supports this chip.

• Satellite A100 (PSAA9) Display Driver for Windows Vista

  Hello world

  This link does not work so I did not install my display driver for Windows Vista and system performance looks really terrible. I was wondering anyone use Satellite A100 (PSAA9) and Windows Vista. Because I was looking for this driver on the internet but I coudnt fint it anywere. This situation made me so sick.
  How to prevent or to send e-mail to the Toshiba customer support any link broken. Or anyome know address direct download for Vista driver? Please help me asap :(

  15/02/07 Windows Vista 97.54 nVidia display driver

  Thanks for your help,
  Mehmet in Istanbul

  Hello

  Try the driver nVidia for Satellite P100 (PSPA0E).
  nVidia drivers work for all their graphics chips.

  Good bye

• Need driver sound Windows Vista for Tecra M4

  Hello!

  I installed Windows Vista news on my Tecra M4, but I can't find the Sound Driver. Site Web de Toshiba isn't its Driver for Windows Vista.

  Please help me

  Hello

  AFAIK Tecra M4 (PTM40) is supported for Vista but it's just a matter of time when the drivers will be available for download. I caj only recommend you to visit the Vista download page from time to time and check if the drivers are there.

  Good bye

• Need driver VGA Windows Vista Ultimate 64-Bit for Qosmio G40 - 11 d

  Please, I want to know how to get the driver for Windows Vista 64 - bit for my Qosmio G40 - 11 d because I can not find in Toshiba driver downloads or N-vidia.

  Consult laptopvideo2go (dot) com - they got modded drivers nForce who will probably walk!

• 1536 LaserJet MFP: Installing the full driver software for LaserJet 1536 MFP

  I've recently updated (?) from Windows 7 to Windows 10.  At first, that everything worked well.  However, I started to get more notifications and error messages that various HP software or files did not work properly whenever I booted the computer or printed.  To try to solve the problem, I tried to download and reinstall the complete driver package.

  Everything seems to work fine until I asked me to connect the printer.  The printer is detected immediately and the process of initialization (before installing) proceeds for several minutes until it got to 99%.  At this point, it remains at 99% for a long time and gives me an error message stop the installation process.

  I managed to install a basic printer driver using Device Manager and update of Windows, but this driver doesn't provide limited scanning capabilities.  I really need the HP TWAIN driver scanner that comes with the complete package so I can scan from my document feeder and have 8.5 "x 11" paper scan as paper 8.5 x 11 inches (not 8.5x14).

  How do I setup beyond this 99% error process?

  Thanks in advance!

  Found the answer to my own question.  Just in case someone else has a similar problem, when subsequently installing full driver, you will receive a list of items that will be installed.  Choose "Customize".  Deselect "HP Toolbox."  Continue with the installation.  When I did, everything has been installed correctly, including the scanner of HP Twain driver.

• System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

  I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

  Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

  The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

  ChkErrBB.CMD: Detect an error in the PININST_BBV

  ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

  In addition to a video driver not install, I found:

  C:windows\system32\Drivers\enecir.sys not found

  Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

  C: 38.8 GB free of 58.0 GB

  E: 2.02 GB free of 12.9 GB

  15 f009wm 8.1 WIN 64 bit
  Office Jet 2540
  P2-1113w WIN 7 64 bit
  G71-340US WIN 7 64 bit
  dv4-1225dx VIsta 64-bit
  zd7000 WIN XP Pro
  xv886 Millennium WIN / WIN XP Pro
  HP deskjet 6980xi
  HP pavilion xt236 / ze4200 WIN XP Media Edition

  found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

• FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista

  How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?

  Hi MVRMVR,

  Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.

  I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Intel Graphics Media Accelerator Driver for Windows Vista has stopped working and was recovered successfully (on a Windows 7 OS).

  I have a Windows 7 operating system, but I have a "Intel Graphics Media Accelerator Driver" for Windows Vista, which constantly crashes, causing the computer screen go idle for a few seconds and with the message in the title of the question. Can someone tell me please where to get a driver Windows 7 for stands for the Windows Vista driver? In addition, please tell me how to get rid of Windows Vista driver

  See you soon.

  If the manufacturer of your PC's drivers Win7 installation will replace Vista driver