Full screen does not occupy the entire screen: Fusion 5.0.1 on Lion 10.7.5

Similar Questions

• part of the screen lack sound as if all type of himself downplayed a little and does not use the entire screen

  I have a dell studio with vista, I shot it today and the far right 1/4 of my screen has disappeared, its like everything kind of himself downplayed a little and does not use the entire screen. I didn't change anything or add programs. someone has an idea?

  Hi musicwatkins

  
  Did you the latest changes on the computer?

  You can check if changing the resolution of the screen helps you solve the problem. See below for links-

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  You can also check if the setting parameters of monitor, referring to the manual of the monitor will help you.

   

  I hope this helps.

• HP Photosmart Series 4500: HP Photosmart 4500 printer does not print the entire document

  Printer does not print the entire document.

  @trish45,

  If you are able to print from other programs without any problems. Then we can reduce it down to the site you are using.

  Are you able to download and save the document or statement on your computer and then try and print it?

  I suggest to check on the website of the Bank and see if they have a troubleshooting section that might offer assistance.

  Thanks again,

• Printer does not print the entire page.

  original title: printer does not print the entire page.  Sometimes it will display only the left 2/3 of the page. It is running Vista and the printer is a HP Photosmart Premium.

  Problem HP printer.

  Ask in a forum HP or HP support.

• DV5Z w/HDMI does not fill the entire screen

  I have a DV5Z with installed Blu - ray player. When I connect the Dv5z for my Panasonice 42 in plasma 720 p with the HDMI cable, the entire screen is not used in full picture format. There is a border of 1 inch around top, bottom, left and right.  My DV5Z has ATI HD 3200 graphics card and I do not understand where I need to adjust it so that it works ok. I already had a Dv5T with Intel 4500 and it worked fine, (in fact he filled a little too much about "1/4 of the image has been off the screen) but not the DV5z and I don't want to watch some blu ray movies with 1inch border around the screen. Where are the settings for me to adjust so that I can watch movies under the eyes?

  I adjusted the display settings, and it did not work. What could be the problem I need to adjust?

  I also adjusted the aspect of the TV and H-fill is not anywhere close and zoom isn't closed and 4; 3, that's not what I want to use.

  Any help is appreciated.

  Try using the ATI Catalyst software.  You should see an option for HDTV in the list on the left in the Advanced view.  It has a few decent explanations on how to use it to configure your TV.  I do not have my dv5z before me right now so I can't be more specific.  If you need more details, let me know, I got exactly the same problem and got it working.

• Rectangle does not select the entire image

  I used Photoshop 9 for quite awhile, but the rectangular mark does not work properly.  I don't stretch and select the entire image.  I reloaded the software without modification.  What I don't want to change that?

  Hello, look in your toolbar Option: you have fixed ratio and fixed size, selected in the Style: fall down. Select normal for a marquee 'free. '

  

  Also, make sure that you don't have a pen (if should be + 0 px like in my picture).

  You can also right-click on the marquee in the options even bar and select "reset tool", if the steps above do not work.

  I hope this helps!

• 9.0.1 Firefox does not display the entire Web page

  The latest version of Firefox has developed an intermittent bug on my desktop computer. Especialy after a full stop, the program stops displaying many, but not all, the content of the Web page on most Web pages. Drop-down menus and buttons in the sidebar seems particularly prone to this problem, but large chunks of main content also fails to display on most Web pages. It's as if the page only partially loaded, but the loading process has effectively ceased.

  Uninstall, reboot, and reinstall temporarily solves the problem. but it comes back.

  Follow the suggestions mentioned in the following articles:

  • Clear the Cache and Cookies
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Check and tell if its working.

• Printer does not print the entire web page.

  Why my new HP Photosmart 5520 copy an entire web page, even if I highlight the entire page or just the text? It will only print banners on the sides and everything autour. It gives me empty text or shaded areas. It gives me the opportunity to listen to samples and when I do, everything seems normal until I print. Help, please. I want to solve this problem before my husband is trying to do! Thank you.

  Why my new HP Photosmart 5520 copy an entire web page, even if I highlight the entire page or just the text? It will only print banners on the sides and everything autour. It gives me empty text or shaded areas. It gives me the opportunity to listen to samples and when I do, everything seems normal until I print. Help, please. I want to solve this problem before my husband is trying to do! Thank you.

  All web pages?
  Or only some of them - the more complicated menu systems and dynamic content on the sides/high/low?
   
  These web pages have generally an option for printing of the true story without all the extras - look for it.
   
  Web browsers do not always print everything they see * as they see it * nor can they still do that (because of the resolution of the web page, etc.)
   
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=buu01105

• L7780 full installation does not add the center of monitor or digital imaging solution

  My Officejet pro L7780 solution Center and the monitor of digital information have never worked on my Win 7 64 bit system. If I tired recently again reinstall the full program (OJProL7X00_Full_14) after that the deletion of what was there and do a scrub full level 4 (OJProL7X00_Scrubber_8).

  Am able to start the installation (he welcomed me back.. .so not much of a scrub it seems) then connect to my L7780 on my wireless network.   Have all printing features, but no analysis, digital imaging monitor, or center solution. The hpqtra08. exe file is not anywhere to be found.

  Any suggestions would be greatly appreciated

  Hi InnoGuide,

  You mentioned "OJProL7X00_Scrubber_8" running, here is a link to the last cleaning brush (OJProL7X00_Scrubber_14):

  http://goo.GL/qYLei

  Run that, reinstall using the complete software & drivers downloaded from the link below, and then let me know if the problem persists.

  http://goo.GL/jfHyJ

• ESXi 4.1, does not use the entire RAID 5 on Dell R810 datastore

  I installed ESXi 4.1 on a Dell R810.  I've raided the first two drives in a RAID 1 and installed ESXi.  The 4 remaining disks are in a RAID 5 for the main data store.  ESXi acknowledges that the RAID is 2.7 TB but will only create a.7 TB or 744,75 GB data store.

  I did the same thing on several Dell R710s without problem.  Someone at - it ideas?  I guess it's a driver issue, but I do not see updates to driver for 4.1 for Dell R810

  The maximum size of a 4.1 data store is 2 TB less 512bytes. If you want to see the entire data store, you will need to upgrade to ESXi 5

• Picture does not fill the entire page

  Hi guys,.

  I placed a picture on the stage. This image is supposed to be a background. I've intensified this image covers any stage is without doubt. When I test in browser there are white margins on the left and right of this image, in other words, the image does not meet all of the web. Could someone tell me please how to fix?

  Thank you.

  Try to use this to your image

  SYM. $('yourImage').css({)

  'background-image': 'url("imageName.jpg") ',.

  'background-repeat': 'no-repeat '.

  "background-size': 'cover."

  ' - moz-background-size ': 'cover '.

  });

• HP envy 5530: does not print the entire page

  My printer only prints half a page, and the book would always jam. always stop the printing of each page in half and will not end the task. can someone help me or give me a reason to explain why this always happens. or is there someone who can help me to solve the problems. Thanks in advance.

  Hey @erin0312,

  Welcome to the Forum from HP Support.

  I see you have problems paper jam with your HP ENVY 5530 e-all-in-one printer. I would like to help.

  You are able to make a copy of the front of the printer without problem? If not, click here and work your way through the steps recommended in order HP. They deal directly with the issue of the material point of view. If Yes (you were able to make a copy of the façade without problem), print opportunities question is a software oriented. In this case, I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Scanner does not scan the entire page.

  I am running Mac OSX 10.7.5.

  My all in one 5510 printer/scanner scans only part of the page when I use the key on the device.

  If I scan using my Mac system preferences panel, it works very well.

  Any suggestions?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none or A4.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• VMFS full but VMDK not uses the entire VMFS

  Dear all,

  I think in all cases answer to my problem.

  This weekend we exchange Crash, because the VPShere is saturated on the VMFS of our Exchange.

  We are in VSphere 4.1 ESX 2 in cluster mode (disable HA etc.)

  All VMFS are on ISCSI SAN, Falconstor.

  I have created 1 LUN for my Exchange with 300 GB Provisionned.

  The Vsphere client display 278 go not shared, and even storage used.

  To properly restart my Exchange, I deleted 2 instant Vsphere.

  I do not understand were the storage is missing, because in my constituency, I use 2 vmdk.

  The first vmdk: 34 GB (Os sytem & file program)

  The other: 140 go. (Information store)

  If used on the VMFS 140 + 34 174 =, where is the rest of the road 280?

  I couldn't spend my vmfs volume, each time that VSPhere server do with the space?

  , I need to change a setting for recovery automatically space of storage to disappear or something else?

  Best regards.

  As I see you are using some shots.

  Note that the snapshot is NOT backup and use no simple snapshot for more than 24 to 72 hours and etc.

  Look at this:

  Best practices for virtual machine snapshots in VMware environment

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1025279

  Kind regards

• The monitor does not display the entire desktop - having to move the mouse to see the corners of the screen.

  A part of the image on the monitor is not visible. It's as if I'm able to display an image 13 "on a 15 or 17 inch screen. The top and sides of the screen are not visible unless I move the mouse to the sides or the top or bottom. It's as if the computer is set to magnify the mode. Thank you in advance for any ideas you may have.

  Discover 100% zoom on bar up and together, can help.

  or-start-control panel-display-desktop and settings, check these out.