function do not see table

Similar Questions

• Area renamed - not see Tables for guests

  Hi Experts,
  
  I created a table report and guests for this report by using the field of Development_Table, now, I renamed the topic area development Development_Tables.
  
  And I changed the subject - Development_Tables of development in the Advanced tab of answers, therefore, all the tables relate to development and I can change my table report.
  
  My question is, I want to add a column to filter more guests, it shows you are not authorized to use the Development_Tables field to the breast, or the domain does not exist.
  
  How can I see development business line tables and how to change the existing messages that is created in the Development_Tables field.
  
  Thank you
  Oldia...

  as long as your domain is renamed... you get this error...

  These guests already built on the previous area...

  Remedy:

  1. you mention the alias name for the (domain) name of catalogue of presentation in the presentation layer. This name must match the name old before rename
  2. you mention the new domain object name in the XML of your guest... To do this, you must Access Catalog Manager...

  Right-click on command prompt then press change... change xml... Replace the old name with the new name of subject area

  Check these...

  Rename field in responses with no impact on pending applications.

• Photosmart HP 7510: Scan on my printer function does not see my Mac

  Hello

  I recently installed at El Capitan (OS X 10.11).  I install the new HP Easy Scan application, and I can now scan if I boot it from my Mac.  However, there are times where it's easier to start scanning from the control panel of the printer.  When I press "Scan" and then "computer" he can't see my Mac.

  Can someone help me?

  Thank you!

  Hi @Machomamma,

  Welcome to the HP Forums!

  I understand that you can not scan computer with your HP Photosmart 7510, on Mac OS X 10.11. El Capitan. I'm happy to help you in your analysis!

  Please, try the steps in this guide, an error "can not scan to computer" message. Select OS X Mavericks v10.9 and v10.8 OS X Mountain Lion, that these steps work on Mac OS X 10.11. Then choose your type of connection, network, or USB and follow the steps.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that this guide is useful and thanks for posting!

• The sys user can not see tables belonging to the other schema

  Hello

  We have a database used to store the metadata of the soa suite, yesterday, we asked to grant select on certain tables of the prodsoa_bam schema, but we found this sys cannot see the tables of prodsoa_bam.

  If we question dba_tables we can list the tables of prodsoa_bam, but if we execute a query on the tables that we get an ORA-00942 error.

  Someone suggested a work around?

  Kind regards.

  try using double quotes. It seems that your table name is case-sensitive (which I do like):

  SELECT COUNT (*) FROM PRODSOA_ORABAM. SysIterPrivilege ';

• Changing table - SQL error: ORA-04091: table XYZ is changing, function of triggering/can not see

  Hi all

  I am a newbie to Oracle and I am faced with the above error. Please see the below code snippets. Can someone please tell what I am doing wrong? Thank you in advance.

  Thank you

  CREATE TABLE ABC

  (

  ID VARCHAR2 ENABLE NUMBER NOT NULL,

  FIELD1 ACTIVATE THE NUMBER NOT NULL,

  FIELD2 ACTIVATE THE VARCHAR2 (8 BYTE) NOT NULL,

  CONSTRAINT JOB_PK PRIMARY KEY (ID)

  )

  ;

  CREATE TABLE XYZ

  (

  ACTIVATE THE NUMBER 4 R_ID NOT NULL,.

  ID VARCHAR2 ENABLE NUMBER NOT NULL,

  Column1 NUMBER (2.0) default 0.00,.

  Column2 NUMBER (2.0) default 0.00,.

  COLUMN3 NUMBER (2.0).

  NUMBER (2.0) TOTAL 0.00 default.

  CONSTRAINT TRIP_PAYMENT_PK PRIMARY KEY (ID)

  )

  ;

  create or replace trigger trigger1

  After Insert on XYZ

  for each line

  Declare

  number of newTotal;

  Start

  newTOTAL: =: new. Column1 +: new. Column2 +: new. COLUMN3;

  setting a day of XYZ together Total = newTotal;

  end;

  Insert into ABC (1, 45, ' Demo');

  insertion in XYZ (1, 1, 12.50, 10.20 33,50, ");

  Error report:

  SQL error: ORA-04091: table XYZ is changing, function of triggering/can not see

  Try one before line

  create or replace trigger trigger1

  before inserting on XYZ

  for each line

  Start
  : new. TOTAL: =: new. Column1 +: new. Column2 +: new. COLUMN3;
  end;

• ERROR / T_ITEMS in the TABLE is changing, function of triggering/can not see ORA-06512... ?

  Hi all

  I CREATED THE TRIGGER TO CHECK NOM_ELEMENT BEFORE UPDATE ON THE T_ITEMS TABLE IF AN ANOTHER NOM_ELEMENT LIKE NOM_ELEMENT CURRENT OR NOT, IF AS AN ANOTHER NOM_ELEMENT DON'T SAVE UPDATED CURRENT NOM_ELEMENT.

  MY NO IS:

  1 - I CREATED the FUNCTION CALL CH_UNIQUE_ITEM_NAME

  CREATE OR REPLACE FUNCTION CH_UNIQUE_ITEM_NAME

  (NUMBER OF P_ID, P_ITEM_NAME IN VARCHAR2)

  RETURN NUMBER

  AS

  NUMBER OF X_COUNT;

  -FUNCTION "CH_UNIQUE_ITEM_NAME" TO CHECK NOM_ELEMENT LIKE OTHER NOM_ELEMENT OR NOT.

  BEGIN

  SELECT COUNT (ITEM_NAME)

  IN X_COUNT

  OF T_ITEMS

  WHERE ID! P_ID =

  AND UPPER (ITEM_NAME) AS UPPER (P_ITEM_NAME);

  RETURN X_COUNT;

  END CH_UNIQUE_ITEM_NAME;

  2. I CREATED TRIGGER CALL TRG_CH_UNIQUE_T_ITEMS

  CREATE OR REPLACE 'TRG_CH_UNIQUE_T_ITEMS' before FIRING

  UPDATE

  ON T_ITEMS FOR EACH LINE

  DECLARE

  NUMBER OF X_CHECK;

  BEGIN

  SELECT CH_UNIQUE_ITEM_NAME (: OLD.ID,: NEW.) NOM_ELEMENT) IN DOUBLE X_CHECK;

  IF (: NEW.) NOM_ELEMENT DISLIKES: OLD. Nom_element AND X_CHECK > 0)

  THEN RAISE_APPLICATION_ERROR (-20007, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX");

  END IF;

  END;

  NOW WHEN I UPDATE ANY ITEMS FOUND ERROR "ERROR / T_ITEMS in the TABLE is changing, function of triggering/can not see ORA-06512.

  

  Please help me TO RESOLVE THIS ERROR. I TIRED TO SOLVE...

  Thank you

  You don't realize that you have just set a UNIQUE INDEX of several columns?

  create unique index index_name_uq on table_name( user#, upper(item_name) );
  

  In addition, a GUI Design point, (using the terms of the APEX) that you want to validate the data before submit you.

  (use a Page-level Validation)

  MK

• Table is changing, function of triggering/can not see?

  Hello
  I had this error before, and I solved it with the help of this forum.
  But I didn't ask then why is - this error happening at all?
  Now I have it again, with different trigger:
  
  ORA-04091: table TRACKER. APPLICATIONS is changing, function of triggering/can not see
  
  My trigger code is:

  create or replace trigger "REQUEST_EMAIL_T2"
       after update of assigned_to_assigned_id
       on requests
       referencing new as new old as old
       for each row
  begin
          if :new.assigned_to_assigned_id != :old.assigned_to_assigned_id
       then
        for emp_rec
         in (select      username, assigned_email, form_name
            from      assigned, form_type, requests
               where  assigned.assigned_id = form_type.assigned_id
                    and assigned.assigned_id = :new.assigned_to_assigned_id
                    and requests.request_id = :new.request_id)
                  loop
             apex_mail.send (
                 p_to          => emp_rec.assigned_email,
                 p_from     => emp_rec.upline_email,
                 p_body     => 'You have been assigned a new Request. '
                                  || CHR (10)
                                  || ' Request: '
                                  || :new.request_id
                                  || CHR (10)
                                  || ' Type: '
                                  || emp_rec.form_name
                                  || CHR (10)
                                  || ' Login: '
                                  || emp_rec.username
                                  || CHR (10)
                                  || ' Pass: '
                                  || '******',
                 p_subj     => 'New Request'
            );
       end loop;
  end;
  / 

  The relaxation will compile without error. The error I get trying to update the table!
  
  I absolutely need to define a trigger as "after" update and need to know how to avoid the same mistake again?
  
  Thank you!

  But I didn't ask then why is - this error happening at all?

  Have you looked at the error message? It is very explicit:
  >
  ORA-04091: table String is changing, the function of triggering/can not see
  Cause: A trigger (or a plsql function defined by the user referenced in this statement) attempted to watch (or modify) a table that stood in the middle of being modified by the statement that shot.
  Action: Rewrite the trigger (or function) so it does not read this table.
  >

  Should this request to join the table of queries ? Does not look like it...

• Trigger that avoids "is changing, function of triggering/can not see ' error

  Version Oracle 11.2.0.2

  I have a problem where I try to avoid duplicates in a table using a trigger.  Data looks like:

  EQUIP LO ACCT

  ---------- -- ----

  1000000000 0

  1000000001 0

  1000000002 0

  1000000003 0

  1000000004 0

  Equipment = equipment identifier

  Location = location number

  Acct = account associated with the equipment

  I need avoid the same account to have 2 pieces of equipment are allocated to the same location.

  for example

  EQUIP LO ACCT

  ---------- -- ----

  1000000000 1 1234

  1000000001 1 1234

  1000000002 0

  1000000003 0

  1000000004 0

  I can't create a unique index for this table that when there is no assigned equipment (first example) I couldn't have uniqueness through the location and number.  So, I wrote the following:

  CREATE or REPLACE TRIGGER TEST_TRG before update of test WE acct

  Old SEO AS OLD AS new NEW

  for EACH LINE

  DECLARE

  v_chk number: = 0;

  BEGIN

  Select count (*) in the test v_chk where acct =:new.acct and rental =:new.location;

  IF v_chk > 0 then raise_application_error ("-20001, ' multiple devices at the same location not allowed");

  END IF;

  END;

  /

  .. but of course that I'm shot in the table that is being updated, I get the error of mutation:

  setting a day of test set acct = "1234", location = '1' where equip = '1000000001'

  *

  ERROR on line 1:

  ORA-04091: table xxx. TEST is changing, function of triggering/can not see

  ORA-06512: in "xxx. TEST_TRG', line 4

  ORA-04088: error during execution of trigger ' xxx. TEST_TRG'

  I tried this split into two pieces where a trigger calls another procedure to perform the check and write error, but results were inconsistent and end-user demand does not pick up the error for a reason - it seems to process the transaction very well even if the update was not made at the table level.

  Are there other ways in addition to a trigger to achieve?

  Thank you!

  Adam

  Monty77 wrote:

  ... I can't do this, acct is not a null value, it is ' '.  Right or wrong it is not editable as integrated in application logic.

  Thank you!

  Adam

  Then also consider this value in your index of function according to:

  create table test

  (

  equip the varchar2 (10),

  location varchar2 (2),

  ACCT varchar2 (4)

  );

  CREATE a UNIQUE INDEX TestLocationAcct_UK ON Test

  (case when the ACCT is not null ACCT AND! =' ' then location |) « ; » || end of the ACCT);

  Insert test values ('1000000000 ', ' 0',' ');

  Insert test values ('1000000001 ', ' 0',' ');

  Insert test values ('1000000002 ', ' 0',' ');

  Insert test values ('1000000003 ', ' 0',' ');

  Insert test values ('1000000004 ', ' 0',' ');

  Update test set acct = "1234", location = '1' where equip is '1000000000';.

  Update test set acct = "1234", location = '1' where equip is '1000000001';.

  Error on line 1

  ORA-00001: unique constraint (SYSADM. TESTLOCATIONACCT_UK) violated

  Kind regards.

  Al

  Name of the index has changed to testlocationacct

• com.sunopsis.dwg.function.SnpsFunctionBaseException: ORA-00942: table or view does not exist

  Hi all

  I have a problem in the odiwaitfordata component and when I run get the below error

  Code:

  OdiWaitForData "-CONTEXT GLOBAL =" "-GLOBAL_ROWCOUNT = 1" "-LSCHEMA = ORA_LS" "-POLLINT = 1000" '-SQLFILTER = numero_fichier =-1 ""-TIMEOUT = 10000 ""-TIMEOUT_WITH_ROWS_OK = YES ""-INCREMENT_DETECTION = NO ' "-TABLE_NAME = PRACTICE." "" "" "» GENERATION. "

  Error:

  com.sunopsis.dwg.function.SnpsFunctionBaseException: ORA-00942: table or view does not exist

  Thanks in advance

  Kind regards

  Vivek

  Hi 2700773,

  "PRACTICE. GENERATION' is not a valid table name. You must only give the name of the table, not the schema name. You can also give a list of table, separated by a comma, or a table name masks using % and _ like wildcards.

  As for your previous question? Is it resolved? Please give us a feedback or close the message if it's over.

  Kind regards

  JeromeFr

• Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  What exact version of After Effects you are trying to use? 13.7.1 is?

• I have lightroom 5 and I'm trying to merge some pictures to make a panorama, I saw on the tutorial there is a function under the photos to merge into panorama. I do not see this option in my lightroom 5, it is something new in Lightroom 6?

  I have lightroom 5 and I'm trying to merge some pictures to make a panorama, I saw on the tutorial there is a function under the photos to merge into panorama. I do not see this option in my lightroom 5, it is something new in Lightroom 6? I don't have photoshop.

  Hi santanu_rudra,

  The Photomerge option is available in 6 of Lightroom, and not in Lightroom 5.

  Kind regards

  Tanuj

• I installed lightroom 6.2 but I do not see the new functionality "dehaze".

  I installed lightroom 6.2 but I do not see the new functionality "dehaze".

  Dehaze is not available in Lightroom 6.2.

  It is only available in Lightroom 2015.1 CC and later versions.

• Can not see all the stored procedures in the Entity Data Model Wizard

  I hope it is a simple oversight on my part I try to use the new beta version of odp.net with entity framework support. I can open the Entity Data Model Wizard, give him my information database, and I can choose various tables to use successfully. But in the list where I select the tables, views and stored procedures, the wizard does not see my stored procs or my point of view.
  
  Does anyone know why he would see the tables but not views or stored procedures? My procs can be found under "packages" If that makes a difference. I tried to create a fictional stored procedure at the level above the title of 'procedures', but it is unclear whether.
  
  Is it possible for me to debug this from here? The log files, I could watch that would help me?
  
  Thank you
  Jim

  I belive your Oracle database 10 g such as 9iR2 predates.
  ODP/EF Beta does not list the stored procedures or functions when connect you to a database Oracle 10 g before.

  Readme.txt:
  4. the procedures are not compatible with the DB 9.2.
  Thus, there is no stored procedure listed by the EDM Wizard for 9.2 DBs.

• I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• MO does not see my HD Mactor. But before...

  Hello

  I have 1 TB HD Mactor. And I used it as TimeMachine for a long time. But after the last software update, MacBook started does not see the external hard drive. And he said: "the disk you inserted is not readable by this computer. What can I do? I don't want to lose the datas in HD using disk utility.

  Please help me.

  Kind regards

  ......

  All hard disks have finishes by fail.  Which may occur to your 1 TB HDD Mactor.

  Save your MBP on another HARD disk.

  Then look for hardware problems.  Using different USB ports.  Try different USB cables.  Remove the HARD drive and install in another known functional pregnant.  Test it on another Mac.

  If no success, then test it using disk utility > first aid.

  Ciao.