Functions of anchor speed and Parallax Scrolling (rotate)?

Similar Questions

• Encoder speed and orientation on the NI 9401 in cDAQ-9172

  Hello, I have a module or 9401 for my cDAQ-9172 and she is now installed in five slot to connect a dual channel encoder. Channel A is connected to pin 14 and channel B to pin 17 and the encoder is powered by 5v dc.

  I want to measure the speed and if possible rotation orientation.

  Fix for this that I started the VI, who can count total impulses in the encoder.

  My question is, how do I change the DAQmx create frequency channel and DAQmx Read of impulse 1 Chan 1 Samp Freq counter, calculate the speed real encoder and orientation?

  Quintino Hi and sorry for not having answered quickly.

  Your VI works perfectly well for low frequencies with me. If you want to measure fairly high frequency (> 1 kHz), you may need to check how a measure of 2 meters. You will find an example attached (lv2009). Just plug the signal at the source of one of the meter (ctr0 for example), then set it to the value of the counter on the VI ctr0 control. Use a splitter too high (4 is fine). I was able to compete with the signals of 1 MHz on my Board.

  If the problem of failover is still happening after that, try to make a measurement with a low frequency generator and 1 meter to check if the problem is the system (it takes).

• Disableling parallax scrolling for Tablet and mobile

  Is there a HTML Code simple to the head of my office layout sites that automatically disables the Parallax scrolling for Tablet and mobile, so that I don't have to create an extra shelf and mobile page layouts?

  You can try these options:

  http://musewidgets.com/search?q=disable

  Thank you

  Sanjit

• Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

  Thank you

  Sanjit

• fragile Parallax scrolling

  I have designed my Web site using Adobe Muse.  I use anchors related for my navigation, with the Parallax scrolling, which allows to Muse.  However, when you click on my links to move to the bottom of the page, scrolling Parallax seems to shake since page moves.  It's hard to explain, it's like the site's vibrant instead of having the movement of smooth Parallax should be.  Can someone help me please find a way to solve this problem?  If you want to see what I mean, my site is www.robdemeritt.com.  Just click on the links on the side and you'll see what I'm trying to describe.  Any help would be valuable greaty!  Thank you!

  Update to the latest version of Muse. Your site has been built using 7.1. The current version is 7.3. There was a number of important improvements in the area of scrolling between 7.1 and 7.3 of the parallax.

• Management of Parallax scrolling?

  Management of Parallax scrolling?

  I had the opportunity to create some cool effects scroll with Parallax scrolling options in Muse, but my work (work plan?) space turns into a gigantic mess. I guess I'm something wrong, or things not properly implemented.

  For example, once I have start some modest effects, scroll to the top of the page and then must have a kind of scrolling property value it all starts lining up properly on the live page. I missing something here or do you really apply effects scroll just about everything to compensate for other scrolling effects? I find myself with objects in odd places on my work plan of Muse to make everything as living very well.

  How you guys keep your own scrolling parallax or not you?

  Thank you!

  Was

  [email protected]

  http://www.910zen.com

  Hi tanguy

  It actually depends on the position, speed and movement that you set with the scroll effect settings.

  In your case, it seems that you plan to do items starting with split positions, then everything in a straight line and vice versa on page scroll up.

  Things to take note here, it's the scroll position, as the speed will work according to the scrolling distance that you define on the page with the scroll position.

  Basically there is no plan how it can be designed, but the points I just can help you while you create the effect of scrolling on the different page elements.

  A few videos for help:

  http://TV.Adobe.com/watch/creative-cloud-for-design/discover-new-Parallax-scrolling-with-a dobe-muse-cc.

  http://www.YouTube.com/watch?v=lWlscYhX0jw

  http://www.YouTube.com/watch?v=KJMi5l9Ru-g

  Thank you

  Sanjit

• Parallax scrolling Web site with navigation menu.

  I'm doing a site with parallax view. There will be a story from top to bottom.

  The story will be long enough, so my idea was to put in a fixed navigation menu. If you click on the buttons in the menu, you directly access the different parts of the story.

  An example of a website that has Parallax scrolling and a menu.

  moto.Oakley.com/#maximum-Peripheral

  Do I have to use triggers?

  You can use a manual menu widget to use and link to different parts of the story on the same page using the anchor links. Here is a video tutorial on how to go about doing that in Muse - http://tv.adobe.com/watch/muse-feature-tour/muse-create-anchor-links/.

  Thank you

  Vinayak

• Dealing with speed and speed in a 3D space.

  Hello everyone.

  I recently posted a question about the project, I am working currently on, but it's a new show, so I thought I would start a new discussion.

  I'm doing a video clip. In this clip, the audience is taken through a "vortex" as the tunnel in space. Similar to this one;

  http://www.YouTube.com/watch?v=VwjfrAn0hnA

  However, in the video the whirlwind is made of a number of audio waveforms, generated with the functionality of Waveform Audio After Effects, which have been précomposé and made into a tunnel by using the CC cylinder feature of After Effects.

  I made the composition and the waveforms that make the whirlwind 30 000 pixels in height, which, according to the CC function cylinder has been applied and axis of rotation X adjusted 90 degrees, translates into depth.

  I created a layer of camera and only related to a layer zero. I placed the camera at the opening in the vortex (beginning of tunnel/top of the cylinder), at the beginning of the main computer through the Z axis and made a keyframe. I'm at the end of the model, place another keyframe, and move the position of the Z axis, until it comes to the end of the vortex (at the bottom of the cylinder).

  I hit everything in 1/4 resolution because I am on a MacBook Pro technical standard and it can not handle the size of model précomposé waveforms (30 000 pixels) full resolution (there are 10 waveforms précomposés in a precomp. If ten precomps which are 30 000 pixels in height). I play it through and the camera does not travel through the wormhole to my desired speed. I need to look like the audience travel through the wormhole much faster.

  Currently, the vortex is just a right cylinder. However, I intend on using various travel cards to add turns and dips to vortex, as well as adding various other pieces, such as particles.

  So my question is: How do I change the speed of the camera so I get the speed I want?

  Note: If anyone thinks they know better to approach this project, even if the methods are completely different, I'm all ears.

  Thank you!

  Simply change the diapers slightly left / right, each with slightly different values. If you have some of them behind each other and the shifts to more or less follow a sine/cosine or an exponential curve, it will look like a long tunnel. Could be automated using expressions, of course. Another idea would be to exploit a particle system as an individual with a ring as transmitter or even an emitetr point that spit particles of the rings. Using forces and different properties of the particle over time, you can also create some interesting things...

  Mylenium

• Pilot hole: speed and height increase after audio dropping during A2DP streamin

  When there is an audio fall (which happens from time to time) while listening to music A2DP, the pilot trying to 'keep up' once the connection has been restored. It does this by pressing the audio so that both audio speed and pitch are increased. So what I mean is: audio interruption, the continuous music, speed and height increasing, after about two seconds the speed and not lower level back to normal.
  It is a very bad audio experience.
  The right thing to do would be to drop audio samples completely which should have been passed in these hundreds of milliseconds rather than keep them.

  Similar experiences?

  BTW, I use headphones JBL REF610.

  Best regards, Kana

  My only works. What Media Player do you use? Your headphones have a function of buffer?

• If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file.

  * Original title: to access Favorites

  If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file but suddenly close showing the list of favorites. . I use Chrome and it happened all of a sudden. It was functional this morning. All the advice to fix this will be greatly appreciated

  Have you tried the Chrome forum? https://productforums.google.com/forum/#! forum/chrome

• How can I use both scrolling and vertical scroll?

  Hello

  I am new to Blackberry. I have drawn on the use of horizontal and vertical scrolling scroll, however there is no adequate solution (or there is really no way?). Furthermore, I'm showing a datagrid on the screen, but it does not fit in the screen. There are twelve columns and more than a hundred lines which are not editable or selectable.

  Thanks for your replies!

  If you override Manager.moveFocus () you can manually call setVerticalScroll() or setHorizontalScroll(). You can use the status of the function moveFocus to say if you move vertically or horizontally.

• How to enable vertical and horizontal scrolling with sculpt Touch Mouse (W7-64). When I activate horizontal disables vertical scrolling to scroll.

  Load the IntelliPoint software that is more recent, although she did not recover that (!). Scrolling works when you use the Synaptics Touchpad.

  When I turn on all the other functions in the IntelliPoint vertical scrolling is disabled.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
  The description of the question, I understand that you can not use horizontal and vertical scrolling with sculpt the touch mouse.
  Let me go ahead and help you with the issue.
   
  As you have been told that the IntelliPoint software is updated, but sometimes Sculpt mouse drivers may be outdated which causes this problem.
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  I suggest for the link and follow the steps in the article:
  Install IntelliPoint software and the mouse
  http://support.Microsoft.com/kb/258785#top
   
  Method 2:
  Download and install the drivers from the link:
  http://www.Microsoft.com/hardware/en-in/d/sculpt-touch-mouse
   
  See also:
  http://www.Microsoft.com/hardware/en-in/help/support/how-to/mouse/use-sculpt-touch-mouse
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Parallax scrolling with new Muse CC Responsive Design

  Hello

  I realize that make scrolling effects (yet) work with several breakpoints in the new Muse of the CP. So, my question is the following:

  Is there a way to create a background image in the new Muse of the CP with several breakpoints of Parallax scrolling?

  Thanks in advance.

  Totally new and very promising:

  Scroll Animations - motion scrolling Effects - Plugins | CodeCanyon

  Made by a member of this forum: @Dennis van Leeuwen

• Parallax scrolling problem

  I did experiment with implementation of parallax scrolling on an item in an article in hand coded HTML. It's just an empty div with a background image that moves a little slower than the subsequent divs on the page. The parallax effect works as expected on the desktop and on iOS Safari, but this does not work as expected within the DPS app. I think it's that background Parallax image does not move until I lift my finger on the screen, rather than move while scrolling with my finger. Does anyone have experience with this and possible solutions? Thank you!

  In case anyone else has this problem, it seems that DPS technology handles scroll the way events which the iOS used, not allowing the DOM be handled until the end of the event (when you take your finger off the screen). iOS has managed the scroll events in the right direction since iOS 8, but it seems that the DPS technology is still a little behind. My solution uses iScroll (specifically their script of probe) to keep track of scrolling as it happens and trigger events on parchment, namely my script of simple parallax.

  Here is the link to the iScroll library: iScroll 5, smooth scrolling for the web

• Parallax Scrolling Issues in Dreamweaver CC

  Hello

  I have problems with the Parallax scrolling for the first picture (top) on the website www.imago-graphics.com. This happens mostly with chrome, but also with Firefox to a lesser extent. When first loaded, it works fine. But if you scroll down beyond the initial image, then save again, the image disappears sometimes, or does that part (the top would be cut), and the Parallax does not, as if it's getting snagged on something. I'm kind of a newbie when it comes to the Parallax and so far have not been able to find something online that answers my question. Any help would be most appreciated.

  Thanks for the pointers!

  MP

  In fact, thought of her! There are actually two instances of the same image, which, for some reason, he does have the hiccups during the transition.