Had some problems with video chat using ichat. could not get the camera on. discovered that I have to suspend merger in order to get the isight camera to work. When I suspend the camera works. When I restore camera is disabled.
He also says at the start of merger "guest of restoration. I'm the only one logged on as administrator. Guest is DISABLED.
SSN662 wrote:
Had some problems with video chat using ichat. could not get the camera on. discovered that I have to suspend merger in order to get the isight camera to work. When I suspend the camera works. When I restore camera is disabled.
Peripheral USB can only be directly controlled by an operating system at the same time so when you the user has decided to connect the iSight from Apple built into the Virtual Machine you disabled OS x not Fusion. So if you want to use the iSight from Apple built into OS X, while the virtual machine is running, and disconnect it from the virtual machine.
Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > virtual machine management > configuration of the USB controller and USB devices connection > connecting and disconnecting USB devices
He also says at the start of merger "guest of restoration. I'm the only one logged on as administrator. Guest is DISABLED.
'Guest' as part of the "restore Guest" is the Virtual Machine itself in the guest operating system and has absolutely nothing to do with the user who may or may not be currently registered.
Is it possible to disable the lock screen camera? the people cannot take hundreds of pictures without you knowing? I know that you can disable the camera completely in the restrictions under settings, but surely there is an option to turn off?
Come on apple. the phone the most expensive on the market should see some support and quality service...
A later Edition OSX El Capitan 10.11.2 but trying to add the signature via overview and cannot get the isight camera to display or work is the PDF document and thanks to the preview
Overview > help instructions to create a signature with built-in camera:
Your computer create a signature using the camera's built-in: Click on the camera. Hold your signature (on paper) in front of the camera so your signature is at the level of the blue line in the window. When your signature appears in the window, click done. If you don't like the results, click clear, and then try again.
If your device works (check in Photo Booth or other applications of the activated camera), you have probably not are you your book signing white still in front of the camera for a long enough time to make your signature "appear" in the window. When you put the paper to the top, you can see your signature on the paper. However, when you move it closes and hold again and level with the blue line for several seconds, he 'appears' as one another, new, clear and magnified view of your signature. You can then move the paper and click on the 'Finished' button to capture the image of the signature.
You establish a new Exhanche Business Account Provisioning System of the TPT Lenovo ActiveSync connection turns off WiFi, Bluetooth, camera and USB connections, even it is not caused by the commissioning of the company server. I trink Lenovo has to fix this emitiatly or the opportunity to randomly the profile settings of the Provisioning Manager in TPT.
LENOVO IF YOU PLEASE FIX THIS OR LET US UNINSTALL YOUR SECURITY SYSTEM WHICH DISABLES THE FUNCTION NEEDED TO WORK ON TPT.
By removing the Exchange account, the functions are turned on again, but it id not not possible TO use you business EAS account as it should!
There is no solution the TPT us will BE useless...
Best regards Pasper
Quick solution myself:
you will need to edit in the file following with the name "yourname.lenovoconfig" in the second line the uuid, you can see under settings / location & Security / Configuration profiles. The uuid is the alphanumeric code long of the parameters that was installed by the exchange server. You are able to also change th eDevice settings above, I blocked Dataroaming for example.
2 Note the uuid of the Exchange Server in the settings
3. delete the Exchange account
4 adjust the uuid and your settings at the top of the source code and send it to your Lenovo over e-mail - for example your googlemail.
5. click on the lenovoconfig file and install the Lenovo-Profilmanager
6. new to connect to your Exchange Server.
7. now, everything should work how implement you the Lenovo Support contains a sample file with all the setting options which could be very useful. My settings are only a small facility to come around the problem. Hope to train here all I've been able to help.
I have a mid-2010 - iMac 21.5 ", running 10.10.5 with 16 GB of memory. All of a sudden my iSight camera doesn't work. The led next to it is a steady green. What can I do to get back up & running?
I just ran a ' reporting system and it shows that he has not found a camera.
Hey Ronald,.
Have a webcam of work is very important, that I use mine often so I wouldn't be happy if mine did not work.
RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.
You can not. However, I'm not sure why you think it's a privacy or security threat. The only thing that can be accessed without unlocking the phone is the camera to take pictures. No one can access your data already on the phone.
OK, so everybody knows that we're stuck with 24 GB of SSD on the 1 TB drive of Fusion on the 4 k, iMac 21.5. Water under the bridge and Yes, not something extremely attractive according to my personal POV.
What I need to know, however, is what the (mechanical) part of HARD drive on this drive? I know that the model used by 5 k a 24 GB SSD + HDD 7200 RPM as their 1 TB Fusion option.
But what of the 21.5? Will I get 24 GB SSD + 7200 rpm or the (famous) 24 GB + 5200 RPM.
How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?
Pure how to install OSX on a Fusion drive and keep the recovery disc function
These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.
These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).
WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.
This is the target disk partitions, and the configuration that we want to achieve.
Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)
Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.
There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).
Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage GB LVG 121.0 disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk1
1: EFI EFI 209.7 MB disk1s1
2: disk1s2 Apple_CoreStorage TB 3.0 LVG
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
/ dev/disk2 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 3.1 TB disk2
Logical volume on disk0s2, disk1s2
0D807F6E-FB7C-418F-AAF4-EF3EA3525D10
Fusion unencrypted drive
Here's how we do it.
A. clean reinstallation of Mac OS x.
1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
2. create the OSX install USB, insert it to the MAC workstation.
3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
4. in the menu at the top of the screen, select disk utilities.
5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
6. If his success, then go ahead to install OSX new to that partition, as usual.
7. otherwise, if it does not, that means fusion drive has been damaged.
8 follow the instructions below to fix it.
.B. Split disc Fusion in the physical hard disks
1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
2. in the menu at the top of the screen, select utilities and Terminal.
3. on the screen of the terminal type:
Cs diskutil list.
You will see something similar to the screen below.
4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
diskutil cs removeUUID
p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
cat/etc/random >/dev/disk0
cat/etc/random >/dev/disk1
. C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
2 do the same with the mechanical hard drive.
3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
6. we must now test if the recovery hard drive partition works.
7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
8. it is important to test and make sure that the partition of hard drive recovery.
D. recreate the fusion drive
1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
2. in the menu at the top of the screen, select utilities and Terminal.
3
. on the screen of the terminal type:
diskutil list.
You should find that we have a list of disk group hard physical volume only, no logic here still.
4. you will see something similar to the screen below.
5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
For example:
diskutil cs create fusiondrive disk0s2 disk1s2
diskutil - the version of disk utility command line. cs - This calls for Core Storage, which is necessary for the merger. create - creates a basic storage group. nom_lecteur - is the name of the drive and how you want that he
appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".
driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files. Otherwise, the fusion drive performance will be worse that it is designed for.
8. you will see something like below appear on the screen:
Creation Volume logical storage of kernel
Move isk0s2 storage of carrots
Disk1s2 of switching for the storage of carrots
Waiting for logical volume group appear
Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
Finished CoreStorage operation
9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
diskutil - once again, this is the version of disk utility command line.
cs - called the basic storage functions, which are necessary for this arrangement.
createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
11. go to diskutil to verify that you can see this new partition on the list.
12. test by erasing all the data from it.
13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
14. This will allow you to keep the recovery disk feature.
X. how Prime to recover partition
Press and hold the command and button R set immediately after hearing the bells to boot.
Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
Y. how-to boot OSX install USB
Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.
Is it possible, and how, to disable the shortcut keys for the camera wizard?
The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.
I find this very frustrating.
Hello
Of course you can turn it off. You must remove the software from the camera in msconfig start up.
So go to start-run-msconfig online online Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!
I got an iPhone 6 South Korea and I live in England, now I'm stuck with the noise of camera, whenever I take a photo or a screenshot and it is really annoying because I have to take pictures, presentations to (legal) work
Can you please help me find a solution, I have always been a loyal Apple customer, but I started to be disappointed.
iPhone IPMPC-*-APA - A15 *.
There is no solution. In some countries, it is illegal to turn off the shutter sound on digital cameras. Your phone is from a country where it is illegal to disable sound, therefore, it cannot be disabled. That's the price to pay for the purchase of products were intended for sale in another part of the world.
Got an iMac 27 inches by the end of 2012. Lately the built-in camera will stop working. If I restart it, it works fine. And it continues to work properly. I think that something is happening when he sleeps all night, or for a long time during the day. I called the Japan Apple here, and they had me to do that thing where you hold Option, command and... P and R? There is a name for it, but I forgot. I'm going to call Apple again, but if anyone has some smart ideas for me, I'm all ears. Thanks in advance.
Reset the SMC and see if that helps, you can also reset the PRAM. Instructions for both are in the iMac Intel SCM and reset the PRAM
I use LV2010 with 2 USB cameras. The cameras are controlled as NOR-IMAQdx devices and everything works fine.
However, there is an irritating behavior:
LabVIEW is always looking the intranet for all connected devices. In my company are more than 10 cameras identified that are used by other colleagues. Sometimes the order of the cams is changing and I must identify and choose my own USB cam again. In addition, I think that IP-scan waste some time. The loading process takes much more time as soon as I understand IMAQdx SubVIs.
My question: is it possible to disable the search for other IP cameras? I have not found any know how inentify the cams of the USB only.
Thanks in advance,
MOS.
Thank you: I found the solution with your help.
The suggested EnabledIPCameras reg key has a spelling error. After playing, I discovered that EnableIPCameras works. Thus, the d was wrong. Thank you, Chris!
Disable the ping of discovery does reduce not only for both IMAQdx list VI cameras drastically. And I use it now to check that all my USB webcams work well.
For your information, a comparison of the first start-up of my times in milliseconds:
Hello I recently bought a ' Satellite A300D-15B "it came with Vista Home Premium 32-bit. I want to install XP 64-bit. The driver page have drivers for XP, but it does not specify this time are these drivers for XP 32 - bit or 64-Bit XP. Can come a co
I have windows Vista and I can't seem to download files. I am the only user on the computer and I reformatted recently. When I download a file from the internet, the download starts and then when it gets to 99.99% finished I thought I need to provide
I'm reading a multimedia windows that I bought on Amazon. When I try to see in WM Player, it pops up a message "the file or device you are trying to use requires a component of Windows Media Player to be upgraded . If I select update, it says "Conn
Hi all... I want to ask a general question. I have a set of buttons and I want them to appear randomlly. HOW? My case, I have 9 buttons and I want them to appear randomly on the screen. Thanks in advance
Original title: invisible Images in the CHM files I recently noticed that images are no longer displayed when I read a compiled help file (.chm). There is a big empty space where the image should appear. I just noticed the problem today, but it coul