Generating the edge com

Similar Questions

• County rising edge specifier "10280" generates the error "-200220"»

  Hello

  I use the box USB-6008 with PFI 0 configured as a counter edge.  Everything works fine when I use it to count the edges fall with the "10171" specifier, but .vi DAQmxBase Create Channel (CI-County edges) generates the above error if I simply replaces "10171" with "10280.  This specifier is not recognized by the device?

  Thank you

  Tyler

  Hey Tyler,

  I've dug into this and found an internal report, and apparently only a falling edge can be used as a trigger of edge with patches of meter.  The other problem is that, even if you can use both, there is that a single input pin for this meter and edge only one type can be detected at the time.  The only solution I see would be to try to find a device with several counters, or take an another 6008 and use it to count the edges of the second switch.

• Emails generated by the Contact form widgets say they come to me rather than the person who generated the email?

  Can I change the emails generated by the Contact forms to say they come from me, to the address of the person who actually generated the request on the contact form? Or is it always automatically a link to my creative cloud account because that's how I'm hosting of Web sites?

  Because they come from you (at least from your account)... This is the account which uses the Web site to send the form to your email, which means that a user visits your Web site can send you this email "SAME" when they have not an e-mail account themselves.

  No, you cannot legialy change the address to theirs... that's a big no, no, in most of the country, but you can and should have a field of 'contacts' on your form that allows people to give you an email or phone number so that you can follow to the top.

  p.s., many people make the mistake of trying to force the contacts to mail in their forms and this offen feedback rounds people in addition to their use if they MUST tell you the color of their underware just to contact you about an offer of sale or the simple question then don't expect to get a large part of your forms.

• Stop the EDGE to the default PDF

  I have 10 windows and want Adobe Acrobat Pro 11 to be the default for all PDF files. I have reset the default several times but the Windows keep passage aboard. How can I overcome this annoying problem?

  I think that I have found a workaround. I changed the default application for the PDF of Acrobat and the edge. The next time I open a PDF file, I got the popup, but this time instead of clicking 'Yes' (which comes, generating the error and allows to take on board in charge), I clicked on "do not ask this again" and things seem to have stabilized. But I still don't understand why Win - 10 refused to allow Acrobat to edit the default value normally.

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• How to use an internal counter of the cDAQ-9172 for measure PWM and generate the frequency?

  Hello

  Requirement of my project is to measure 6-channel PWM and generate 5 frequency channels.

  Suggestion of engineer OR bought cDAQ-9172 chassis and NI 9423 (8 DI correlated) and NI 9474 (8 correlated DO) for this requirement. I have a few questions

  Article:

  1 > what should I know to customize my CompactDaq 9172 chassis

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9367

  I know that this way to synchronize the physical support 32 correlation system pin o for housing 1-4.

  => I'm not really sure how to use these channels synchronization support.

  2 > using internal counters on one NOR cDAQ-9172 as a sample for other tasks clock

  http://digital.NI.com/public.nsf/allkb/ADFC4DD8C9690232862575B70079FBD4

  I know that I can change the ownership of the physical channel so I can get 2 meter outside the frame 6 and 7.

  => I do not think that this solution will be me because I can use only 2 counters with this method.

  Could someone tell me please how to fix my project requirement? How to choose the setting for DAQmx screws?

  I have experience with measure the PWM and generate the frequency, but with separated against only.

  Best regards

  Thang Nguyen

  Hey Thang.

  AHA... for this, you can use the channel property node.

  

  See you soon

  Lab

• Measurement and Automation does not open and generates the MAXKnownException error with an unknown exception.

  Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception.

  Heres the log

  Context where the exception was taken:
  (No context - the unhandled exception)

  Size version of Base module
  -------------------- -------- -------- ------------------
  NIMax.exe 00400000 0006 has 000 4.6.0.49152
  ntdll.dll 770E0000 00180000 6.1.7601.18247
  00110000-76060000 6.1.7601.18409 Kernel32.dll
  KERNELBASE.dll 74E00000 00047000 6.1.7601.18409
  SYSFER. 74830000 00072000 12.1.1101.401 DLL
  1BFB0000 0001 NiMaxImp.dll B 000 4.6.0.49152
  Shell32.dll 74E50000 00C4A000 6.1.7601.18429
  Msvcrt.dll 76830000 000AC000 7.0.7601.17744
  74 00000 00057000 6.1.7601.17514 SHLWAPI.dll
  76740000 00090000 6.1.7601.18275 Gdi32.dll
  00100000 76480000 6.1.7601.17514 User32.dll
  Advapi32.dll 75DD0000 000 A 0000 6.1.7601.18247
  sechost.dll 76CC0000 00019000 6.1.7600.16385
  000F0000 rpcrt4.dll 76980000 6.1.7601.18205
  SspiCli.dll 74AE0000 00060000 6.1.7601.18443
  CRYPTBASE.dll 74AD0000 0000 C 000 6.1.7600.16385
  LPK.dll 76470000 0000 has 000 6.1.7601.18177
  USP10.dll 768E0000 0009D 000 1.626.7601.18454
  Ole32.dll 75F00000 0015C 000 6.1.7601.17514
  Msvcp90.dll 739F0000 0008E000 9.0.30729.6161
  Msvcr90.dll 73DB0000 000 has 3000 9.0.30729.6161
  74470000 00009000 6.1.7600.16385 VERSION.dll
  IMM32. 00060000 60000 74 6.1.7601.17514 DLL
  000CC000 76BB0000 MSCTF.dll 6.1.7600.16385
  74320000 00021000 6.1.7600.16385 Ntmarta.dll
  Wldap32.dll 00045000 763E0000 6.1.7601.17514
  Uxtheme.dll 6EB20000 00080000 6.1.7600.16385
  NiMaxUI.dll 1C2D0000 00269000 4.6.0.49153
  Msvfw32.dll 6BE30000 00021000 6.1.7601.17514
  73970000 00032000 6.1.7601.17514 WINMM.dll
  Comctl32.dll 73E80000 0019E000 6.10.7601.17514
  Wsock32.dll 73DA0000 00007000 6.1.7600.16385
  74DC0000 00035000 WS2_32.dll 6.1.7601.17514
  NSI.dll 75AA0000 00006000 6.1.7600.16385
  Oleaut32.dll 76580000 0008F000 6.1.7601.17676
  6D8E0000 003 Mfc90u.dll has 1000 9.0.30729.6161
  MSIMG32.dll 6EBA0000 00005000 6.1.7600.16385
  dwmapi.dll 6EB00000 00013000 6.1.7600.16385
  MFC90ENU. DLL 6EAF0000 0000 D 000 9.0.30729.6161
  NiMaxRes.dll 1BFD0000 0007 has 000 4.6.0.49153
  BtMmHook.dll 10000000 00038000 6.4.0.2900
  PSAPI. DLL 76440000 00005000 6.1.7600.16385
  DCIMAN32. DLL 6E1F0000 00006000 6.1.7601.18177
  MXS.dll 1 B 240000 4.6.0.49152 0000F000
  mxsutils.dll 1B4D0000 00041000 4.6.0.49152
  Msvcp71.dll 7C3C0000 0007C 000 7.10.6030.0
  7 360000 00056000 7.10.6030.0 Msvcr71.dll
  mxsout.dll 1 B 400000 00075000 4.6.0.49152
  64600000 00014000 4.257.3.0 nirpc.dll
  Mswsock.dll 73A 90000 0003C 000 6.1.7601.18254
  profapi.dll 76460000 0000B 000 6.1.7600.16385
  mxMax.dll 1BF20000 00086000 4.6.0.49152
  58000000 00240000 6.5.0.3005 AsstntUI.mxx
  MFC80U. DLL 71210000 8.0.50727.6195 0010F000
  MSVCR80.dll 0009B 000 8.0.50727.6195 72E50000
  Comdlg32.dll 20000 75 0007B 000 6.1.7601.17514
  71180000 00087000 8.0.50727.6195 Msvcp80.dll
  ATL80. DLL 6BD70000 0001 B 000 8.0.50727.6195
  MFC80ENU. DLL 730F0000 8.0.50727.6195 0000E000
  59000000 00582000 6.5.0.3005 mxwTask.dll
  00011000 74180000 6.1.7601.17887 Netapi32.dll
  74170000 00009000 6.1.7601.17514 netutils.dll
  74150000 00019000 6.1.7601.17514 srvcli.dll
  wkscli.dll 74140000 6.1.7601.17514 0000F000
  56000000 00148000 6.5.0.3005 mxwRCEng.dll
  mxcal.mXX 1 A 110000 00056000 4.6.0.49152
  mxcat.mXX 1BE20000 000AB000 4.6.0.49152
  nidmfuiu.mXX 04360000 0010D 000 1.11.0.49152
  NIPALU.dll 64000000 00057000 2.1025.3.0
  64500000 00006000 2.1025.3.0 nipalut.dll
  NIPAL32.dll 00007000 1F700000 2.1025.3.0
  SETUPAPI.dll 76240000 0019D 000 6.1.7601.17514
  CFGMGR32.dll 75DA0000 00027000 6.1.7601.17621
  76220000 00012000 6.1.7601.17621 DEVOBJ.dll
  6 280000 00031000 1.9.0.49152 nimdbgu.dll
  6 000000 00017000 1.9.3.49152 niorbu.dll
  nimstsu.dll 6E180000 0001 has 000 1.11.0.49152
  nimhwcfu.dll 6DFD0000 000 B 6000 1.11.0.49152
  6 050000 0001E000 1.9.0.49152 nidimu.dll
  nimxdfu.dll 0003E000 1.10.0.49152 6D0F0000
  nimxpu.dll 6E1B0000 0000 000 1.11.0.49152 B
  Iphlpapi.dll 74280000 0001C 000 6.1.7601.17514
  WINNSI. DLL 74270000 00007000 6.1.7600.16385
  74B 40000 001BD000 11.0.9600.17126 WININET.dll
  76A 70000 API-MS-Win-Downlevel-User32-L1-1-0.dll 00004000 6.2.9200.16492
  770B 0000 API-MS-Win-Downlevel-shlwapi-L1-1-0.dll 00004000 6.2.9200.16492
  75AB0000 API-MS-Win-Downlevel-Version-L1-1-0.dll 00004000 6.2.9200.16492
  76430000 00003000 6.2.9200.16492 API-MS-Win-Downlevel-normaliz-L1-1-0.dll
  normaliz. DLL 76450000 00003000 6.1.7600.16385
  iertutil.dll 75AC0000 00219000 11.0.9600.17126
  76610000 00005000 6.2.9200.16492 API-MS-Win-Downlevel-advapi32-L1-1-0.dll
  76200000 00017000 6.1.7601.17514 USERENV.dll
  nidmxfu.dll 04470000 0049F000 1.12.0.49152
  nimru2u.dll 6EC70000 00044000 2.10.1.49152
  nimmgluu.dll 69830000 0001E000 1.11.0.49152
  nimercu.dll 6DFB0000 00019000 1.11.0.49152
  MFC71. 00106000 140000 7 7.10.6101.0 DLL
  MFC71ENU. 360000 5 0000E000 7.10.3077.0 DLL
  niGPIBui.mxx B 6, 000000 0008E000 2.7.0.49152
  niIVIui.mxx 02CE0000 000D 0000 4.2.0.49152
  niPXIui.mxx A 671 0000 000BC000 2.1280.1.49152
  niRemPXI.mxx 1 A 270000 00057000 4.6.0.49152
  mxRmCfg.dll 1 has 000000 00090000 4.6.0.49152
  niRMui.mxx 1AD70000 000FD000 4.6.0.49152
  NISRLUI.mxx 6B 500000 00061000 3.4.0.49154
  63800000 00010000 2.7.0.49152 NiSpyLog.dll
  niSWui.mxx 1A3B0000 00072000 4.6.0.49152
  niVISAui.mxx 63360000 0017D 000 4.1280.0.49152
  62 30000 0002E000 4.1280.0.49152 niVISAres2.dll
  RICHED32. DLL 40000 00006000 6.1.7601.17514 6FC
  Riched20.dll 61F70000 00076000 5.31.23.1230
  Wshtcpip.dll 73A 80000 00005000 6.1.7600.16385
  nisysapi.dll 68 has 00000-000B 2000 5.5.2.49152
  Dbghelp.dll 70F20000 000EB000 6.1.7601.17514
  -------------------- -------- -------- ------------------

  Application: C:\Program Files (x 86) \National Instruments\MAX\NIMax.exe
  User name: administrator
  OS version: 6.1.7601 (Service Pack 1)
  Exception code: C06D007E
  Exception addr: 74E0C42D

  Sender's address: 74E0C42D
  Function name: RaiseException
  Module name: KERNELBASE
  Parameters: 00000000 00000001 0518FD84 C06D007E
  Source file: (not available)

  Sender's address: 68A3C6F7
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000000 0518FD50 005F59B8 0000001E
  Source file: (not available)

  Sender's address: 68A53D87
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000350 68A791B8 005F59B8 00000000
  Source file: (not available)

  Sender's address: 68A0DC65
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 68A 01680 00000001 68A93BB8 FFFFFF01
  Source file: (not available)

  Sender's address: 68A0DFC4
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 68A 01698
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 1BE27A73
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 020469F0 02047084 0518FED0 1BE76CBA
  Source file: (not available)

  Sender's address: 1BE30D2E
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 02029FA8 02047748 0518FF34 1BE21D4C
  Source file: (not available)

  Sender's address: 1BE35780
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 00000000 00000000 02047818 020469F0
  Source file: (not available)

  Sender's address: 1BE21D4C
  Function name: (not available)
  Module name: mxcat
  Parameters: 02029FA8 1BE6264D 0518FF7C 73DD3433
  Source file: (not available)

  Sender's address: 1BE21CDC
  Function name: (not available)
  Module name: mxcat
  Parameters: 02030018 00000000 00000000 9192C45C
  Source file: (not available)

  Sender's address: 73DD3433
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 00000000 0518FF94 7607338A 02047818
  Source file: (not available)

  Sender's address: 73DD34C7
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 02047818 0518FFD4 77119F72 02047818
  Source file: (not available)

  Sender's address: 7607338A
  Function name: BaseThreadInitThunk
  Name of the module: kernel32
  Parameters: 02047818 00000000 00000000 775D5D69
  Source file: (not available)

  Sender's address: 77119F72
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  Sender's address: 77119F45
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  If I could come with the OS discs for the thing, I think I'd do a new install of Windows 7.

  Mike...

• How generate the waveform analog multi simultaneously.

  I use the relay Full.vi Gen to generate a waveform.

  I want to create another form of wave and start at the same time.

  Any suggestion?

  Hi turbot.

  The easiest way to make the two tasks simultaneously is to have two copies of this task in the block diagram. In LabVIEW, any function that has all its entries ready or a Subvi runs "simultaneously", so no additional real action must be taken to make them simultaneously. However, you must make sure that all entries of all your screws are to be executed simultaneously are ready at the same time (which means a set of functions that generate the wave does not need any input on the other). It's called the data flow model in LabVIEW. Read this for more information: http://zone.ni.com/devzone/cda/tut/p/id/6098#toc0

  I would you suggest to use an other sub - VI for opening and reading your file (as well as use a different file for each reading Txt Subvi relay). You can also make your Subvi re-entrant. For more information on screw reentrant, refer to this link: http://digital.ni.com/public.nsf/allkb/98847B4E4C715E6D86256C59006B57CC

  I would also say that you pass the path to the main file of your VI by using a control in your Subvi, rather than using the constant you have now.

• Generate the '@' character ascii with an ATL sequence on a T60p laptop?

  Greetings,

  I have a Lenovo T60p laptop. How to emulate a full 102 key keyboard when it comes to composing as ATL-64 sequences to generate the '@' character ascii. I read the documentation and did not.

  Kind regards

  Jean-Pierre

  After you activate the number lock the box red is the num pad and the characters and numbers in the lower right corner of the surface of the key is activated.

  If the "M" button is now a '0 '.

  The zero on the left while typing in the ASCII code for the '@' is required for windows - so you ask Microsoft, but not me

  

• How can I get my printer to print all the way to the edge of the paper?

  I have a printer HP Deskjet 3050 J610, running on Mac OS X 10.6.8.

  I can't seem to find a way to get the printer to print a full page of purge, or even a page (8.5 "x 11") with a narrow border on the edge of the page.

  Is it possible to do this (I sure hope so); and, if so, what settings will make it happen?

  Thank you.

  M

  Hello

  I'm sorry to inform you that the product in issue does not support printing full page, you will find listed by specifying below (Research of borderless printing):

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06a/18972-18972-238444-1142650-410635-4066450.html?DNR=1

  Below you will find that the minimum margins should remain by the mechanism of specific equipment:

  Top: 0.06 inches

• How to generate the report on rules

  How to generate the report on rules with id recipient and with a few keyoword in a rule.

  The rule management dashboard has an integrated 'report rules', you can configure properties and input parameters.

  For rule management dashboard, click homes > Administration > rules. In the upper right, next to the date and time, click reports.

  You can also find these helpful videos: http://edocs.quest.com/foglight/5610/Foglight_Reports_videos.php

  Hope this helps,

  Shay

• Keep something at the edge of the browser until you reach a certain size.

  Hey, there! I do a fixed with breakpoints width site because I'm going to use parallax scrolling strongly in the project. I have two elements that are pinned to the left and to the right of the browser window, so that they move with him. I would love it if they would stop from moving once the browser hits a certain size. You can see what I'm doing here: mark2000.com/bms-test/

  The clips, and the edges of the page follow the edge of the browser because I pinned them up left, right and top. The site stops the browser hits 1440px enlarging. I wish that these two elements to stand at the edge of the site instead of the edge of the browser at this time. Possible? Thank you!

  Switch the pinning of the edges to the Center in this breakpoint

• Error while trying to generate the Proxy Services on OSB

  Hello

  I am developing some services on OSB, every service call stored procedures using a database of JCA adapter.

  I followed this tutorial:

  https://guidoschmutz.WordPress.com/2010/08/08/Oracle-service-bus-11g-and-DB-adapter-a-different-more-integrated-approach/

  Business service are ok, they work fine, I tested it directly from OSB.

  Problems when trying to generate the proxy service.

  The General configuration of the proxy after set the source of the wsdl and when I specify jca file proxy service, an error message returned:

  "Unable to update JCA transport invalid JCA proxy service. Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties."

  And here's my content created by JDeveloper jca file:

  
  

  < name of the adapter-config = "getApprover" = 'Database adapter' adapter wsdlLocation = "getApprover.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/adapter' UIConnectionName = "Adapter" adapterRef = "" / >

  < endpoint-interaction portType = operation "getApprover_ptt" = "getApprover" >

  < className = "oracle.tip.adapter.db.DBStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "ERS_SKS_TASK_UTILITIES_NEW_PKG" / >

  < property name = "Procedurename" value = "GET_APPROVER" / >

  < property name = "GetActiveUnitOfWork" value = "false" / >

  < / interaction-spec >

  < output / >

  < / interaction of endpoint >

  < / adapter-config >

  
  

  Is there someone who had attempted to use the JCA transport with database adapter already? Please give me a suggestion.

  
  

  Thank you.

  Fairlie
  

  Hello

  In transport, changes in the Protocol on the proxy for local or http service.

• How to generate the array Diagnostic Utility ADU for Esxi server

  How to run Diagnostic Utility ADU or HP Insight Diagnostics HP Insight Diagnostics table to collect the status tables and logs data FRO an Esxi Server

  How to generate the array Diagnostic Utility ADU for Esxi server

  Example:

  Download the package .vib here: http://vibsdepot.hp.com/hpq/feb2013/esxi-5x-vibs/hpacucli/hpacucli-9.40-12.0.vib

  and place it on a store of data seen by the host...

  Install it using the CLI:

  software esxcli vib install d vmfs/volumes //hpacucli-9.40-12.0.vib

  Now run it:

  ~ # cd/opt/hp/hpacucli/bin

  / opt/HP/hpacucli/bin # . / hpacucli

  HP Array Configuration Utility CLI 9.40.12.0

  Detection of controllers... Fact.

  Type 'help' for a list of supported commands.

  Type "exit" to close the console.

  => ctrl all diag file=/tmp/my_ADUreport.zip ris = on = on zip xml = on

  Generation of diagnostic report... done

  -Online output

  / opt/HP/hpacucli/bin #.

  my_ADUreport.zip in / tmp can now be downloaded from the host...

  It could be that useful...

  / Rubeck