Future upgrade of the Firmware MENU suggestion / query

Similar Questions

• Error 7 when the upgrade of the firmware on GS728TP

  I'm having a problem to upgrade this device to the latest firmware (6.0.1.18) and get error (7). The unit's firmware: 6.0.1.14 and Boot: 2.0.0.6

  I use CSC version 1.3.2 to upgrade the firmware and I tried connecting directly, but no luck.

  Does anyone have a solution? Thank you!!!

  Thanks for the suggestion. I've updated all the firmware via web interface.

• Questions of CMC M1000e redundancy since the upgrade of the Firmware 5.00

  Hello

  We see a lot of the following alerts

  "Chassis management controller (CMC) redundancy is lost '.

  and 30 seconds later

  "The chassis management controller (CMC)" is redundant".

  on our fleet (47) of the chassis, since upgrading the firmware to 5.00.

  It happens every day on some chassis, which, before the update, maybe obtained a such report once a month, if that.

  Everyone knows about this problem?

  THX,

  John Bradshaw

  Bradje1,

  I'm doing research on the issue for you, and it seems that there is another way out in the future to replace 5.0. In this time, but if you want you can either restore the CMC firmware to the previous version, or ignore the error up to the new CMC update is released. Sorry for the inconvenience.

  Let me know if that answers your question.

• "End of the upgrade of the firmware" required on E1000?

  I recently bought an E1000 router and had to put in place manually (with the help of technical support) b/c the Connect software wasn't working properly with my computer.  Today I called the technical support to ask about upgrading the firmware - for security reasons - I'm not having problems.  They walked me well to download the new firmware updated, navigation on the desktop and install it.  (I have nothing decompress).  I told them I thought I had to do a hard reset 30 seconds or something and reconfigure and I was told this is not necessary.  The site says that all the 4 steps should be performed in order to update the firmware correctly.

  If my browser seems to work correctly afterwards, and the listed version is the new version, should I do the hard reset and reconfiguration?  If I did not, is the firmware upgrade completed?  During the process, we me no what this is pointing upwards, is back.  However, after initially installing the router, I made a backup on mine, just in case.  Not sure it would do any good, however, as he himself has automatically saved as file Outlook for some reason any.

  Thanks for any help!

  If the updated version is indicated on the page of the router and all the devices in the network works fine, then there is no need to reset the router.

• M1000e with M610 Blade. iDRAC6 problems with the upgrade of the firmware 3.50 (Build 4) - "image downloaded missed the check" error

  I have the blade that is a M610. its current 3.30 iDRAC6 Firmware version (Build 17), his version of BIOS is 6.0.7. I am trying to upgrade the firmware to 3.50 iDRAC (Build 4). I am upradging by the MCC on the M1000e chassis. I choose the slot of in that the blade is and then start the IDRAC GUI. I choose firmware update and select the firming.imc file that I used successfully on some other M610 blades. After about 30 seconds, he returned with the following error.

  The uploaded image has no verification

  Why?

  I came across the same problem (with a refurb M610, iDRAC firmware has been 2.20).

  I tried to upgrade the iDRAC6 firmware to 3.60 via the web interface of iDRAC6 and it was a no go.

  I tried several browsers (chrome and firefox) and same problem each time.
  I tried to go to firmware (as shown in the accompanying note) 2.31 instead of 3.60 and same question every time.

  I finally managed to update the firmware of the iDRAC6 by upgrading the web interface M1000e and not in the iDRAC6 web interface.

  It worked the first time (using Chrome).

• Upgrades of the firmware and NVSRAM on two controllers MD3200

  I have a double MD3200 controller (more an enslaved MD1200) which is currently running firmware v07.70.06.63 and NVSRAM vN26x0-770890-005 and I need to upgrade the firmware so the NVSRAM to take advantage of some new features.  I'm also about to implement the level of High Performance and another level of MD1220 storage.

  Wondering if anyone has experience of firmware and/or NVSRAM upgrades on the controller device double MD3200?

  Read the upgrade notes, it seems that it should be possible for me to update without having to close my VMs, however I think that is too optimistic.  So I intend to a failure of the systems, stop the virtual machines, and then upgrade and restart all virtual machines, once the firmware is updated and the storage Bay is visible from my ESXi hosts.

  Any ideas or experiences that anyone can share?  e.g. I need to reboot physically (market power) storage arrays?  I was hoping to do most of the work of the House and I would like to avoid having to attend physically on the site, if I can.

  I did it at home... (MD3000i)   Make sure that the machine you are remoting in with MDSM on it does not work out of storage.   I made this error only once.

  I leave the ESX / ESXi hosts running but stop the virtual machine.   Controllers to recover, as basically powercycled by day, I can't believe that all VM would survive through that if left turned on.

• The upgrade of the Firmware

  Hi guys,.

  Quick question,

  We have a pool that contains 4 members as follows:

  M1: 6,28 TB

  M2: 6,28 TB

  M3: 21,31 TB--> used: 14 to

  M4: 5.23 TB

  and we have around 15 to free in the default pool.

  and we want to update the firmware for each Member without any stop.

  The problem is that we can't move M3 maintenance pool because it requires a clearance of 21.31 TB move this member!

  Q / Why do we need a free space of 21,31 TB in the default pool instead of 14 to to move the Member?

  Thank you best regards &,.

  Turki

  You can connect on the support site: eqlsupport.dell.com and call (see the phone number for your region) or open a case online (Support contract required).

  -joe

• Update the Firmware on SG200-18

  I need to update the firmware on the SG200-18 to the latest version. Which of these links, and subsequently, what file I need to download for that (I just need English)?

  http://software.Cisco.com/download/type.html?mdfid=283783779&flowid=24309

  Thank you!

  Hello

  You are in the right place, you want to select the SMART switch firmware.  The MIB are SNMP, so you don't need to enter those unless you have to.  Once you click on the scroll to the bottom of the list and select:

  SX200 Firmware Version 1.3.7.18 
  sx200_boot - 13506.rfb

  and

  SX200 Firmware Version 1.3.7.18 
  sx200_fw_1.3.7.18.Ros

  You will need to update the firmware as well as the startup code.  I suggest doing both and then just restart once.  Note that the startup code requires TFTP to transfer, I usually use TFTPD32 for this.

  We also have a little longer then usual for the switch to reboot when first upgrade you the firmware, because it made some changes to the file system internal to the switch. If you are comforted in you can watch the progress.  Once you start to feel it takes too much time, wait a few minutes and it should come up (I waited for a good number of these improvements in the laboratory).

  Hope that helps,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Update the Firmware on HP printers

  A printer firmware is the internal software that controls the operation of the device.  Whenever you want to solve a problem with a printer, it is always best to make sure that the firmware is up to date.

  Occasionally, companies will release a firmware update that will fix or prevent issues in their products.  Here are some useful videos on the upgrade of the firmware with the HP printers.

  Performing a Firmware Upgrade using the built-in Web server:

  Update the USB Firmware from the scene on multifunction printers:

  Update the USB Firmware of the scene on the single function printers:

  I hope this helps if someone is looking to update the firmware of their printer.

• Windows 7 Pro - WAU is missing from the start menu

  Hello. Thanks in advance for your help. I have four computers with Windows 7 Pro. None of them are in a domain, and the users are administrators with disabled UAC.

  A computer that I am wanting to upgrade to Ultimate does not show the "Windows Anytime Upgrade" in the start menu. WAU is in the other three systems start menus, but not this one. YES - I am an administrator and it is professional edition. NO - I'm not on a domain and have not tinkered with Group Policy settings.

  When I go into the properties of the computer, the "get more features with a new edition of Windows 7" is also absent on the shot I want to improve. Any ideas?

  Where did you get your Windows 7 Professional licenses? Is it volume licensing?

  If you are unable to find the Express upgrade program, first of all, make sure that you are running a supported product, WAU is not compatible Windows 7 Enterprise or Ultimate because it is the most comprehensive editions of Windows 7. If you use the home edition Premium or professional and you are not able to find it, click Start > click on Control Panel. Click in the view by: list box and click large icons, then double-click the Anytime Upgrade Panel element.

  WAU is supported in the distributions of volume of Windows 7 Professional license?

  By default, it is disabled. It is likely, is likely to make an Express upgrade, but may be disabled by your network administrator in order to avoid upgrades of licenses for the company. Consulter consult with the person who manages your computer, find out if you can upgrade the machine.

  If the administrator access to the machine, try the following, click Start, type: gpedit.msc, and then press on enter on your keyboard.

  Expand User Configuration

  Expand Administrative Templates

  Expand Windows components

  Click Windows Anytime Upgrade

  Double-click on prevent Windows Anytime Upgrade of the race

  Double-click on prevent Windows Anytime Upgrade to run, select enabled, and then click on apply and OK

  Exit group policy

  Click Start, type: gpupdate.exe/force

  You must restart the computer and then you should be able to make an Express upgrade.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• After the upgrade to the new version of Firefox, one losing all my tabs, whenever I close. I did what was suggested in the FAQx, but I still lose all when I close. I want to solve this problem. How?

  I want to know how to make my tabs save when I close Firefox. I did what was suggested in the FAQ section, but all my tabs disappear whenever I close Firefox, you use the command "exit", or the "X" button That was the reason I never updated to the new version previously, but hoped that the problem had been addressed and updated, now I'm stuck with having to reopen each tab whenever I open Firefox. Please tell me there is a way to fix this. And I'm not fluent technospeak, so I need simple and basic instructions. Thank you. Mark

  Hello

  By pressing Alt + T on the keyboard displays the Tools menu.
  To see the full menu bar temporarily, press Alt or F10.
  To make the permanently visible menu bar, right-click on the + after the last tab and enable (check) menu bar or press Alt + V > toolbars > menu bar.

  Everything on tools > Options

  Keyboard shortcuts

  ...............................................................................................................................

  Useful links:

  Beyond the tools > Options - about: config

  Subject: config entries

  Information page (Alt + T) tools > Page Info, right-click > view Page information

  View without Plugins

  Files & Firefox profile folder

  Firefox commands

  Basic troubleshooting

  After the upgrade

  Safe mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Troubleshooting Plugins

  Test Plugins

• I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2 but I can not Airpay icon on the menu bar of my mac to turn blue when I select the apple TV conn

  I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2, but I can't get the Airpay icon on the menu bar of my mac to turn blue when I select the apple TV connected to a HD from LG smart TV. Help!

  Hi, Arghbee1.

  Please visit Apple support communities.

  I understand that you are unable to AirPlay from your Mac to your Apple TV.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you do not see the AirPlay icon , make sure that your Apple TV is awake and that it meets the system requirements.

  If you do not see your Apple TV in the AirPlay menu, make sure that your Mac and Apple TV comply with the system requirementsand your software from the Apple TV is updated. Also check your firewall settings:

  1. Choose the Apple menu > System Preferences, click Security & Privacy, and then click the Firewall tab.
  2. Click the lock icon and enter an administrator name and password.
  3. Click Firewall Options.
  4. Deselect the option "block all incoming connections".
  5. Select the option "automatically allow signed software to receive incoming connections.

  If your office does not look great on your HDTV, high-definition TV could apply image quality improvements that are not the best for the computer images. Check the manual of your HDTV for more information on how to adjust your HDTV settings for use with a computer. Your HD TV could offer a more appropriate display mode, such as the computer or game mode mode. Also try adjusting the HDTV settings like sharpness, retail building and noise reduction.

  If you mirror your screen and the image correspond to your HDTV screen, you can adjust the size of the Office for the best image. Click the AirPlay icon, and then select an option under "game size desk to." If you fit to desktop size to your Apple TV, the image fills the screen HDTV but will not look as good on your Mac screen. Learn more about overscan and underscan and what you can do about it.

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  See you soon

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• Cannot access prioritization of media after upgrading the firmware to Ver.1.1.28.147876

  Greetings.

  I have just updated to firmware Ver.1.1.28.147876 now when I try to access the media Prioritizacion in the main menu, it only shows the message 'waiting '. I tried to wait more than a day, and it remains the same. I have reset to factory settings and rebooted, the problem remains.

  Ideas and more back to the previous firmware? I was waiting for the new firmware improvements, no problems.

  Thanks in advance for your comments!

  Have you tried using another computer and another browser such as Google Chrome, Firefox, IE, so for insulation. I suggest try you it if you haven't. Another thing, turn off / on the router to update it in case there are few managers who changed which must be in sync.

• Cisco of WRV 210 Firmware Upgrade at the end of life

  I'm new to Cisco and not very knowledgeable on the networks, but looking for updated firmware for Cisco/Linksys WRV210 router.  Current firmware is 1.1.16 and I think 2.0.1.5 is available but I am not able to find if.  The router is on the list of 'End of Life' Cisco and is not supported, it seems.  I would like to move to a new router if there is no suggestion.  It is used for small businesses at home and structurally with cat5e cable.  Works well on my PC but when I went to the Macbook pro, I often have to renew the DHCP lease for a connection to continue.  When I added a 8 Dynex gigabit ports switch to my stereo equipment ' head in ' to divide the Ethernet for the TV, receiver, Set Top box and Blu - Ray on Pandora streaming now stops after a few minutes of listening.  Message appears on television (unstable network connection) or (not connected to the Internet) then removes Pandora.  With Ethernet connection running Pandora on my Macbook pro is always very well and never stopped.  I'm autoconfiguration for 100 Mbit/s full duplex (which could be a problem) and the new gigabit 8-port switch not set manually I know.  Maybe not the router but a problem of negeotiation automatic network.  I want to upgrade to 1000 Mbps network best steam netflix, etc.  I'm not sure I even the configuration of the router WRV 210 correctly, but if I replace it, I'll use it in another application.  I thought that I would update the firmware on the router WRV 210 to see if it helps while working this problem.  I can't find the firmware, if someone could make a suggestion, I would it would be greatly appreciated.

  Scott,

  Navigating Cisco's Web site can be a little intimidating sometimes.  Here is a link to the firmware:

  http://www.cisco.com/cisco/software/release.html?mdfid=282414014&flowid=788&softwareid=282463177&release=2.0.1.5&relind=AVAILABLE&rellifecycle=&reltype=latest.

  You may need to be logged in order to reach this link.  If you do not have a Cisco user id, you can sign up for one and it will allow you to get more resources than when not connected.

  Mark Furlong