G41 upgrade

whenever I try to update my graphics driver g41 & reboot I get a blue screen and do it back before it works properly, I recently installed a new hard drive &

icant get above 1 on the windows experience for graphics & gamming.it score was all perfect before this new dropprd hard to 500 gb 1 TB drive.i's.would who have

anything to do with it?

Contact Zoostorm here: http://www.zoostorm.com/ContactUs.aspx
They help you find the model number of your computer Zoostorm.
While they are at it, ask them to provide the web address for the driver downloads they use for your model.

Tags: Windows

Similar Questions

  • G41 - update to Vista Edition family Basic is a good idea?

    sorta, I like to keep my g41 and was curious if an upgrade to Vista Home Basic is a smart idea. as you know, my hardware is a little outta date... Thanks in advance

    James

    Note of the moderator; subject published

    Fortunately, NVIDIA keeps supporting the legacy cards. If most of the distributions out there should work fine.

    If you're new to Linux, I would try Linux Mint on a CD or USB drive. Lubuntu is also a good idea because he goes easy on older hardware. You can continue to try different distros until you are comfortable with one or find one that you like best.

  • Hello, new Member! Q:lower power processor for IBM G41?

    Hello all, new Member here!

    A good friend gifted me an IBM Thinkpad G41(#2881) in excellent condition, and it uses a processor MHz Celeron D 2.53.

    I think it uses a processor of type "office" and wants to replace it with a smaller power, keeping the same speed, FSB, etc..

    This may be to ask the 'impossible' (I think that the CROWD support than he came with) but it can't hurt to ask, and this forum seems to be the best place to ask.

    I think there are two versions of the G41, Celeron D has a smaller MOB that hides the Pentium 4 (?), please correct me if I'm wrong.

    All suggestions are welcome, but I really need to know if someone did, (I don't have to blow a working machine!)

    Any "electronic" issues relating to these forums, I will gladly try to answer!

    Thank you for your time and consideration!

    Mark T.

    Welcome to the forum!

    All G4x series units use full desktop processors and will not accept the classic laptop processors. Power efficiency is not something they are known for...

    You will need to swap the Board to allow the use of the high-end Pentium 4 HT processors that were available on some units G41.

    Is this useful? Not in my book - and I love G series ThinkPad. In all fairness, Celeron D does nothing to sneeze, and these machines can very usable today with some upgrade in the areas of the RAM and hard drive...

    Good luck.

  • Upgrade processor or motherboard on Dell Vostro 230 Mini-Tower

    I have a Dell Vostro 230 Mini-Tower, and the vehicle currently has Intel Pentium E6500 processor. I would like to move on to something better, because my current processor does not meet the minimum requirements of some games I want to play. I was wondering what processor I could update? I know that the new processor has to adapt to the taking of the motherboard, but I don't know how to find out what socket has my current motherboard, or even what motherboard it is.

    I would also like to know, if I upgrade the processor, but instead get a new motherboard, can't I get a motherboard and plug and it will come with a new processor, or he will have to adapt my current processor? Upgrading the motherboard makes much difference to the speed of CPU if I don't actually pass the processor?

    I am running Windows SP3 & DirectX 11, with 4 GB of RAM, and I also have an ATI Radeon 5670 HD graphics card and a power of 300W.

    I have to get a new power supply if I upgraded the motherboard or processor?

    Hello

    I mentioned the list of processors that are also compatible with the Vostro 230 Mini-Tower.

    Number

    Code name

    Cache

    Clock speed

    Front side bus

    Q9650

    Yorkfield

    12 MB

    3.00 GHz

    1333 MHz

    Q9550

    Yorkfield

    12 MB

    2.83 GHz

    1333 MHz

    Q8400

    Yorkfield

    4 MB

    2.66 GHz

    1333 MHz

    Q8300

    Yorkfield

    4 MB

    2.50 GHz

    1333 MHz

    E8600

    Wolfdale

    6 MB

    3.33 GHz

    1333 MHz

    E8500

    Wolfdale

    6 MB

    3.16 GHz

    1333 MHz

    E8400

    Wolfdale

    6 MB

    3.00 GHz

    1333 MHz

    E7600

    Wolfdale

    3 MB

    3.06 GHz

    1066 MHz

    E7500

    Wolfdale

    3 MB

    2.93 GHz

    1066 MHz

    E6300

    Wolfdale

    2 MB

    2.80 GHz

    1066 MHz

    E5400

    Wolfdale

    2 MB

    2.70 GHz

    800 MHz

    E5300

    Wolfdale

    2 MB

    2.60 GHz

    800 MHz

    450

    Celeron

    512 KB

    2.20 GHz

    800 MHz

    Vostro 230/230 s has been tested with Intel G41 chipset (motherboard) with ICH07 only.

    Motherboard and processor are two different components.

    I suggest you to upgrade the processor.

    Answer just to get help.

    Thank you & best regards
    Mustapha S
    #iworkfordell

  • ThinkVantage Access Connections for Windows XP on G41

    I use a 2886-5TU G41 and I really screwed up.  I was cleaning my registry and it is a mess.  I lost all network connections, and they are not recoverable.  I reinstalled the software wireless and ethernet.  Device Manager reports the wireless card and Ethernet work.  But I can't connect what either as utilities connection - windows and IBM are corrupt.

    I d/l the 83cx71ww.exe and followed all the instructions.  I reinstalled sp3, hotkey upgrade, NET 4, upgrade of power management before you install the dial-up connection.  Now, when I boot the message I get is that ThinkVantage Access Connections will not work on this system.

    Y at - it somewhere that I can d/l the original supplied with this laptop for connections, files card WiFi and Ethernet card?  The latest just will not work.

    Thank you

    Carl

    Well, it's now a moot point.  Windows was all simply too altered by me and required a reinstall.  I just did.

    Thanks for watching all the.

    Carl

  • Problem with dual monitors since upgrade to W7

    I am under W7 Enterprise32 bit with dual display (monitors) - a Lenovo L193pC (primary) and a Dell E177FP (secondary).

    Since the upgrade to W7, I noticed that if I leave my PC unattended and locked for a long time (30 minutes and more), when I get back to him, I lost contact with my main screen: the monitor is on, but the screen is black.  I can only see the secondary display and windows cannot be moved from the second screen to the primary.  All I can do is to sign using the secondary screen, near everything I opened down and restart the PC.

    I use a set of chips Intel G41 Express and a Microsft v6.1.7600.16385 driver for the primary monitor.

    I noticed a few people reporting flickering monitors in a similar situation, but not quite the same thing as what I mean...

    Anyone got any ideas how I can stop what is happening?  Is - this driver related?

    Just to let you know that I solved this now.

    It wasn't a driver issue, it was a computer setting.

    When I put the PC display never sleep and the computer to sleep never it solved the problem.

  • No service after upgrade the server to 5.2 on El Capitan

    I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

    I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

    I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

    Some additional info:

    I can connect to the server through ftp and other services; just no web service.

    Port tests show that port 80 is not blocked

    Using the IP address I can get to the window of the home server.

    Accessibility means no services available

    Websites is on and I can't find anything that is not defined in law or is different than before the update.

  • I've never done a Time Machine backup and I have upgraded to iOS Sierra. Help!

    I'm a fool. After owning my Macbook for 5 years, I failed to make a single Time Machine backup. I just saved my essential to an external hard drive. I have upgraded to iOS Sierra. Big mistake. I want to go back to iOS Capitan, but it does not seem possible. Now, my external hard drive is wiped clean (things are dark). What are my options? If I'm stuck with Sierra?

    If you have downloaded El Capitan, it should always be available in your purchases. Now, you will need to make a backup to backup your personal files.

  • Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

    After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

    I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

    But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

    Thanks in advance

    Hello StasV,

    Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

    Audio routing call - the iPhone user Guide
    Help to connect your iPhone, iPad or iPod touch with your car radio

    See you soon!

  • Yahoo Mail failure after upgrade of Sierra - iMac

    After the upgrade to Sierra... Now I find that I can't 'see' Yahoo mail... I tried to add the a/c: then the removal of the a/c. I get the Triangle of Hazzard indicating error account! I went down this loop for 2 days...

    All my other email accounts worked instantly. iCloud: Gmail etc.

    I tried to manually configure the settings...

    Everything seems 'normal'... but not a thing, no mail: no record... a real pain. the only joy that is web based too... If I can work...

    But, come on APPLE... This happens to my Yahoo mail whenever I update IOS... What is going on???

    I always seem to end up in a CHAT SESSION just to get my MAIL BASIC... This ISN'T a quality SERVICE...

    MAIL today, is a very basic service... Please, APPLE... issue a patch for us, the little guys

    Rant on.

    help, please, anyone...

    One user posted (Re: Sierra - Yahoo mail offline persistently) he has had success in choosing don't no Yahoo when you set up the account, but to choose the other and set up the details manually. You would like to try and see if it works for you.

  • is more able to stream video from some sites after the upgrade to Safari 10

    After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

    Open Safari preferences / Security tab and check the box allow Plug-ins.

    Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

  • What is the text on the lock below screen date, after upgrade to IOS 10?

    Hello

    I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

    What is - this and how can I remove it?

    Hello

    Try a reboot press and hold the power button / stop and menu button hold both down until you see

    Apple logo.

    It may take 30 seconds.

    See you soon

    Brian

  • Stock app not news open stock since the ios10 upgrade

    tried to delete and reinstall. any ideas how to fix? Thank you!

    Hi AK@Ltd,

    Thanks for the upgrade to iOS 10! I understand that when you launch the app Stocks there are no headlines loading. Great way to try to resolve in uninstalling and then downloading it again from the App store. If this did not fix the app, you can try to make sure you have a good and stable internet connection. Also, check that your date and time settings are set to "auto detect".

    Get help with the date and time on your iPhone, iPad and iPod touch

    Restart the iPhone can do the trick as well. Restart your iPad, iPhone or iPod touch

    Please use the Apple Support communities to post your question. These measures should have your app Stocks giving you your new stocks as expected. Good day.

  • Time Machine does not work after upgrade to Sierra

    The Time Machine (TM) fail to start backup and there is still "preparing backup...". "for more than an hour. This right after upgrading to Mac OS Sierra.

    Another weird thing happens to the toolbar of the Mac Mail. The Junk button is replaced by another button. trying to put back in place, but remove the button become a button.

    Please help with the backup problem mentioned above. Thank you much in advance.

    How long have you waited? After a new installation, it must be a fair while even with a SSD to prepare the first backup due to the number of modified files.

    Make sure the TM drive is in the list of items excluded from Spotlight indexing. ICloud newsletter and other cloud services.

  • Not able to scan with the preview after upgrade from Mac OS Sierra...

    After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

    Have you tried scanning with Capture of Image instead? It worked for me.

Maybe you are looking for