ThinkVantage Access Connections for Windows XP on G41

I use a 2886-5TU G41 and I really screwed up.  I was cleaning my registry and it is a mess.  I lost all network connections, and they are not recoverable.  I reinstalled the software wireless and ethernet.  Device Manager reports the wireless card and Ethernet work.  But I can't connect what either as utilities connection - windows and IBM are corrupt.

I d/l the 83cx71ww.exe and followed all the instructions.  I reinstalled sp3, hotkey upgrade, NET 4, upgrade of power management before you install the dial-up connection.  Now, when I boot the message I get is that ThinkVantage Access Connections will not work on this system.

Y at - it somewhere that I can d/l the original supplied with this laptop for connections, files card WiFi and Ethernet card?  The latest just will not work.

Thank you

Carl

Well, it's now a moot point.  Windows was all simply too altered by me and required a reinstall.  I just did.

Thanks for watching all the.

Carl

Tags: ThinkPad Notebooks

Similar Questions

  • MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems

    Community salvation and Lenovo,

    He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)

    THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.

    Hi Ran,

    Thank you!

    I have not yet tried.

    In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(

    Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283

    again and again, I decided to return to the old driver wireless Intel on this page.

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256

    Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12

    I tested it again... THIS MARKET!

    Please try this combination:

    BIOS version: 1.15

    Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000

    ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62

    Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52

    ThinkVantage Productivity Center Pack Version: 3.02

    Power Manager for Windows Vista Version: 2.41 has

    ThinkVantage Access Connections for Windows Vista Version 5.12.

    Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0

    Kind regards

    Ritchy

  • ThinkVantage Access Connections for Windows 7 (32 bit, 64 bit) - laptops

    The download link for version 6.26.79 released 7 February 2016 does not.

    https://download.Lenovo.com/pccbbs/mobiles/gic779ww.exe

    Hyperlinks are fixed as of today.

  • Support - disable ThinkVantage Access Connections - 3000 N200

    Hello everyone,

    How can I disable ThinkVantage Access Connections, so that I can use Windows to configure wireless.

    Any help much appreciated.

    Thank you

    KeepGreen.

    If you don't, you can uninstall in Control Panel... If you want to temporary disable it, go to bootmgr to search on your hard drive under the start menu, and then clear thinkvantage access under list of startup programs.

    Or if you are using Vista, go to control panel, defender of windows-> tools-> software-> show for all Explorer users-> disable Thinkvantage access.

  • Unable to access updates for windows xp home edition (sp3) via "Fix - it", Windows Update or Microsoft Update and Windows Update

    Hello

    I have download a new download "Fix - it"; all the convenience of work with the exception of "Windows Update".  Also I went through self-help suggestions in "go-microsoft", but nothing helped.  I also tried the "cmd" method (i.e.: start, run, cmd and then copy and paste each .dll for windows update); 1 a .dll could not be found, and two other 2 couldn't register.  After Windows Update represented existing 'cmd' method, I then, well my system recognized the appropriate software update and allowed me to press the 'Express' butotn to an update of high priority for installation (e.g.: Cumulative Security Update for Windows XP...) Sorry, but I forgot the KB #), unfortunately, he could not install, then I ran Windows Update again and pressed the 'Custom' button and three 3 software update optional appeared, as well as an XP update.  Once again, all the selected custom updates has not installed.  I am therefore at a disadvantage as to how I can access necessary security updates for my computer and would appreciate contact me promptly to address this urgent problem.  Thank you much in advance - arldarl

    Hello Tommy.

    Thanks for sharing the information above to remedy my Windows Update and please accept my apologies for my being too general with my question.

    After many hours of running the programs above, SuperAntivirus found 1 an Adware and 55 Tracking Cookies; MalwareBytes found 1 1 that a horse of Troy, and EsET found Trojan horse more!  My computer is vulnerable, so 'thank you '... I would never have known to load/run these particular l, and nor would I knew I had these TAPI problems in my computer.

    After several attempts of installing/re-installing 'Fix - it' (i.e.: deletion of multiple copies associated with my Microsoft Online ID), I was unable to make progress, so I ended up check my Services and found BITS to be set up as 'Network' instead of 'Local '.  I made this change, Windows Update, and the Cumulative Update has began to download - finally!

    I suspect that any of your suggestions, and my little trick got Windows Update to work?

    Thanks a lot a lot - arldarl

  • I forgot my password of connection for windows 7 for my toshiba laptop and did not create a reset disk. How can I recover the password or make a new one?

    I forgot my password login for windows7 and I have not created a password reset disk. How can I get a new password?

    Microsoft's strategy concerning lost or forgotten passwords:

    http://support.Microsoft.com/kb/189126

    Maintaining secure passwords - Microsoft strategy on getting around passwords:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    What to do if you forget your Windows password

    If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are on a working group (the majority of individuals are on a working group), you can reset your password by using a reset disk of password or by using an administrator account.

    Create a password reset disk:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-password-reset-disk

    Reset your Windows password:
    http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password

    If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

    What to do if you forget your Windows password:

    http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

    Solutions to common problems with logging on Windows:

    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

    Recently changed the password? Use the system restore and restore point from before it was modified:

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Change your Windows password:

    http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password

  • set up a wireless connection for Windows 7 and telephone access

    Original title: settings on windows 7 for wifi

    can someone guide me to the right settings on my windows 7 hp so I have wifi so I can access my phone

    Hi Mary,

    -What is the brand and model of your phone?

    -You are on a wired network or wireless?

    I suggest you to go through these links to set up a wireless home network.

    Setting up a wireless network

    http://Windows.Microsoft.com/is-is/Windows7/setting-up-a-wireless-network

    5 steps: how to set up your network wireless home

    http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=khumiPcAEnH

    For Wi - Fi connection settings, you can get in touch with the Internet service provider for assistance.

    To enable Wi - Fi on your phone, I suggest you go through the manual of the phone for settings or contact the phone manufacturer.

  • 'THINKvantage access connections' not installed: Thinkpad R60

    I had used the system recovery and the value of the laptop to the factory preset step after taking the backup of data. Then, I installed most of the technological products thinkvantage, but I forgot to do it for logins. Then I sealed (using the option "to the client, use") and now I can't find/install the dial-up connections. Help, please.


  • Remote access connection in Windows Mail

    I have a Windows Mail account with extension atmc. Access my e-mail via a shortcut on my desktop named 'Windows Mail', how can I access my e-mail from a browser?

    You need to connect to the site of Webmail to your server, which is never your server.
  • Disable the automatic connection for Windows 7 with 1 single active account.

    I've searched high and low on Google but all I could find are methods to allow the automatic connection.

    Is it possible to have Windows 7 load to the top of the selection of Auditors even screen with 1 single active account?

    I remember what is a function available in XP.

    There are probably more simple methods, but it certainly works: create a fake account, then bring it to be hidden from the logon screen. The following batch file will do it for you when it is run under elevated privileges. Of course, you must disable the usual automatic connection setting via this command:

    Control userpasswords2

    And here's the batch file. Use the copy & paste - do not retype! Note that the line starting with
    "echo > % RegFile" is a very long line that ends in 'UserList]. " Not to break upward.

    off @echo
    Set RegFile="%temp%\reg.reg".
    echo > RegFile % REGEDIT4
    echo > RegFile % [HKey_Local_Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList]
    echo > RegFile % "DummyUser" = DWORD: 00000000
    Regedit RegFile %
    NET user DummyUser supercalifrag / add

  • No Internet connection for Windows 8 applications

    I spent all day trying to figure why Windows 8 Apps does not connect to the internet. I tried everything I read refreshing short or reinstallation of windows 8. I'm trying to be patient, but it reminds me of vista. I use Toshiba Satellite P755 2nd gen mobile i7 with 8 GB of ram. I have not installed third-party security, I only use Defender

    So far, I have:

    -Tried a clean boot (no difference)

    -Tried to open a session on Microsoft and on an account. When I tried to log into my account from Microsoft, he said: "we could not connect to the Microsoft services right now.

    -Tried many guests from commands such as sfc/scannow and more

    -Tried to disable the firewall (no difference)

    -Checked to make sure there are no proxy settings (it was not)

    -Checked the time zone settings (no problem)

    -Tried to install Fiddler4 (Nope)

    -J' tried Microsofts app troubleshooting. (No)

    -J' tried Windows 8 troubleshooting of network (Nope)

    -check the resolution of the screen (no problem)

    -Checked UAC (user account control). (No problem)

    -Verified this update of windows is up to date

    -Deleted all temporary files and erased Max

    -Check that the network card drivers and the display are updated

    -I do not know there is more that I don't remember

    Suggestions... :-/

    Hi Jeff,

    As you've already tried the troubleshooting steps, I suggest for the link and try to refresh the computer:

    How to restore, refresh or reset your PC

    Note: refresh the computer will not remove not remove files or change your settings. The apps that came with the computer or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh the computer.

    It will be useful.

  • I can't open up to manage the network connections for windows 7 there is no link for it

    When I go on the Network Center share there is no link on the side to manage network connections and I need to open

    Here are two shortcuts to network connections:

    • Press the Windows key + R , type ncpa.cpl in the box, and then click OK .
    • Click Start , type ncpa.cpl in the Start Search box and press enter .

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • ThinkVantage Access Connection can't find any network.

    I have a T500 2081-CTR

    Login is no longer detects all networks do not know when this happened. Windows wireless works fine and the other functions of work AC it just shows no network when I push the Connect button on find there simply nothing. I really like the graphical interface of AC and prefer to use windows wireless, then no matter what help would be so thank you much

    Thank you

    Sean M.

    so bad that it just started working again after a few updates which had nothing to do with networking. Go figure

  • (Redirected) No screen connection for windows 8

    Hello

    I'm having a problem with my office windows 8 (Alienware x 51). When I turn on my computer everything loads normally except when I get to the account page Microsoft that nothing appears. The box to put in your password is gone. I am not able to connect. The sleep icon, restart and stop always remains in the lower corner.

    When I first turned it on (when the problem started) the computer says something about hard drive failure and then attempted to make repairs. That no longer appears, I just have this problem above.

    Possible causes? The last time I turned it off (when there is no problem) I used the button close with force, so it might not close correctly.

    I tried turning market.

    I ran a system assessment ePSA, he took all the computer peripherals (cables, video card, processor, etc.). If the hard drive took an hour longer than any other device to pass. It is not just well.

    Any help on how to resolve or diagnose the problem would be greatly appreciated

    Thank you

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Dial-up connections in Windows 8?

    Hello

    I have a Lenovo turn... fantastic, but can't find demand for dial-up connections from lenovo and the latest version for windows 7 is not compatible with...

    Thank you

    I hate to disappoint you, but there are no ThinkVantage Access Connections for Windows 8, please see the following thread for more information;

    http://forums.Lenovo.com/T5/Windows-8/ThinkPad-software-for-Windows-8/TD-p/899865

Maybe you are looking for

  • DVD does not work error message CDDCDW TS-L633N windows G - 72 7

    I've been using HP inside the computer, I was told I have a problem with my windows G72 7, the number who came to fix is CDDVDW TS-L633N I need help to fix, drive DVD My simply not want it work appers to load but nothing shows

  • Problem with updates with wondows 7. Error Code 80246007__

    I have editing bad updates for my windows 7. I get an error 80246007. I tried to solve the problem by available on the websight micorsoft support options, but everything in my controse Panel is correctly configured. Help, please! Katie

  • Slate Plus 7 displays the menu at startup and start in safe mode

    Hello I just bought a Tablet HP Slate 7 more. When I got to the top of the Tablet for the first time, he showed a small green menu at the top left that contains the following options: Start normally Fastboot Protocol Core recovery Forced collection H

  • Windows 7 slow clock

    Windows 7 slow clock

  • How to test the backlight of the Simulator

    Hello Guyz Im kind again in the development of blackberry so its more than a new hobby as I recently an interest in java.  So my first app is an attempt to make an application which the camera back given the fon. so I would like to know how to test,