G62-225DX drivers

Similar Questions

• Windows update fails-G62-225DX - bad startup a factory?

  My nephew came to me recently with a G62-225DX HP, concerned about safety.  Given this machine is several years old (recently handed down from his father - I quickly understood why), I was surprised to see she was always being basic Windows 7 Home Premium.  Without SP1.

  My first attempt to resolve this was to run Windows Update - no luck - immediately fails with "cannot run - services is not started.  Of course, verification services, yes I see WU and BITS running.

  So, like any good tech person, I check in the case where the logs and see various errors, including the constant complaints on the Crypto database being corrupted.

  Then, up to be Googling for these symptoms/messages.  I see many people with the same problem and a lot of suggestions on how to fix this (re - reg WU, STRANDS of clear/reset, flush/empty C:\Windows\SoftwareDistribution, catroot2 flush/empty, etc.).  Even seen one on the Intel hard drive problems due to replace it with a drive of more than 500 GB (this unit still has the original 320).

  Spent hours trying all the suggestions there, especially when people said 'Yes, that fixed', nothing helps.

  Since it was not something of value on this machine, I decide backup and restore "factory".

  Imagine my surprise when, after reset of the image 'factory', it has exactly the same problem - Windows Update fails, out-of-the-box on the right!

  I think to myself, it's crazy.  The machine is faulty from the start and everyone was naïve to not get Windows updates, AT ALL!

  I even decided to try the Windows Update Checker (supposed to perform before installing SP1) and it fails with ' Windows Update Standalone install encountered and error - 0xc80000247 ".

  So, I decided to run through the suggested fixes (from M$, no less) and all of a sudden, that Windows Update works.

  I thought, it's fantastic.  He immediately calls to > 130 fixed critical.

  After a few hours of download and installed, I restart only to get a BSOD - STOP 6 b - AAARRRGGGHHHH!  Tried to go through Windows restore previous checkpoint but that too fails with a mysterious error.  In addition, many Google hits on the 6 b says that it's a hardware problem.  But he was executed until the Windows update, with nothing in the case where newspapers to indicate hardware problems.

  Then, I decided to do a restore from the image of what I started with.  At least it ran, even though she could not be updated.

  I no longer dig and see a bunch of updates to the firmware/software for this machine, including the BIOS.  Even saw some strange 'Windows updates' HP.  I thought maybe it was something like the fiasco when the power management update for Intel processors had on machines AMD, thus paralyzing them!  Still nothing - WU still does not work!

  Tried again to return to the original image, hoping that maybe to install all updates of office/hardware/driver on a virgin machine solve the problem.  Nope-WU still does not work.  Even went back through all the suggested fixed (saved as .bat files everthing).  Nothing, nada...

  So, I'm posting here in hopes that someone has a miracle cure that I missed.

  Hello:

  I don't have a magic bullet...

  The same thing happened to me while working on a friends HP 8100 Elite CMT, Windows 7 Pro, HP original image.

  Would not install SP1 or Windows updates. I tried every trick in the book and after spending more than two hours, going nowhere, including restore from the recovery discs, I decided to install a plain OS W7 clean add drivers myself using the product key for W7 on the PC.

  It has worked well.

  You can do the same thing if you can read the product key of W7 on the bottom of the laptop, and your nephew can't live without programs that was shipped with the PC.

  In addition, if you format the drive and just install W7 on current partition, you can probably find the program of the installation files for the programs supplied with the PC in the SWSetup folder.

  Here's how to do when you don't have installation of W7 media.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• G62-225DX

  G62-225DX brother freezes about 1-2 minutes on login. I don't know if the antivirus is set to auto scan. This problem started when he started a sweep prompted with trend macro antivirus and the computer froze. Before I didn't know the problem installation of AVG Free, I started last night and when I looked in the morning, he was frozen but installed AVG Free. I started saving and scanned with AVG to auto deletion. Then I restarted the computer logined and less than 2 min that he froze.

  Anyone know what could be the problem?

  Step 2:

  Have you tried a disk check? Here's a guide from Microsoft to do this:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• Help! The external speakers on HP G62-225dx laptop connection?

  Sew I connect external speakers for laptop HP G62-225DX?  If so, connect to the port "headphones"?  Or do I need speakers with USB connectors? All recommended speakers Logitech?

  Hello fpcorpuz52,

  I see that you have questions about the connection of the external speakers to your HP computer.

  You should be able to connect the speakers to the headphone jack of the laptop. They work without having to do much or any installation or configuration.

  With respect to the recommendation on the speakers, I have a preference to recommend. I would like to just check the reviews before you buy any game, if you plan to buy some.

• INTELLIGENT HP g62-225dx disk error

  Hi all

  My HP G62-225DX indicates an error SMART hard drive at startup.

  "SMART hard drive control has detected an imminent failure." "Hard disk 1 (301).

  I'm willing to change the disk hard since I am out of warranty, but do not know which one to buy. Also, is there a written procedure for replacement out there? My recovery disk on the computer so I think I need to burn that to DVD first no?

  Thank you.

  Hello

  First, you must use the Recovery Manager and see if you are still able to burn your game of recovery disks - for details on this, see the link below.

  Create recovery discs - Windows 7.

  You can create 1jeu of these discs and if your HARD drive is a failure, it is not now possible - if this is the case, you can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 52 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVDs to reinstall the operating system on the new drive - see the guide here.

  Kind regards

  DP - K

• How to activate directX for G62-225DX Win764()

  Hello

  My laptop is HP GG62-225DX, win7 (64).

  The Dxdiag, I found that the directX acceleration is disabled.

  I tried to re - install directX11 and the latest graphics driver for the Mobile Intel® 4 Series Express Chipset Family, but the problem persists.

  Could someone help me solve this problem? Thank you.

  On the start menu, run "regedit" and open this key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Direct3D\Drivers

  Double click (on the right side) the text "SoftwareOnly" and change the value of "1" to "0".

• G62-225dx: OS WILL NOT INSTALL

  I had to install a new hard drive of this computer, but there is no image available system. I have the HP system for this recovery disk, but when it starts loading files windows Setup continues to receive an error code and it tells me to run chkdsk/f. Is their any solution to this, maybe a problem with the ram or something? I am at my end with it and the new hard drive removes healthy.

  I reinstalled the old hard drive and ran recovery through HP option got the old hard drive to load windows and I'm doing a system image and save it on my external hard drive. I'll reinstall the new hard drive, when it ends and try to make a recocovery of this system. Had my fingers crossed.

• Computer laptop HP G62-225DX screen displays only in safe mode.

  When I load Windows normally, it makes the noise as his to the Welcome screen, but the screen is off, but in safe mode, the screen works fine. Help, please.

  The first thing we should do is have you uninstall the driver video starting in Safe Mode, so we can reinstall the pre-assembled driver. Click Start, and then type "device in the start box below and when search Manager appears, click on the link. Expand the section of the graphics card. Everything in this category, click on uninstall it. At the prompt to uninstall, check the box "delete the driver software" and continue the uninstall. reboot and see if it loads in normal startup.

• Wireless not working not not G62

  G62-225DX wireless light is amber.  I can make the blue, but always says capablity wireless off

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) disconnect the battery & adapter then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to the device manager then uninstall the wireless drivers and restart the machine and check if the light is on.

  (3) Please update the Bios & Wireless driver from the HP website.

  (4) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• The electricity in the Notification area meter does not work in my XP laptop.

  Original title: XP battery meter does not work.

  KIM I have Windows XP Professional 64-bit on my laptop. The battery meter in the notification area will not work. It shows that it is connected. I changed the profile of laptop computer power and nothing. The laptop came with Windows 7 Home Premium. Please do not ask me why I went to XP to 7, because who does not help me. How can I fix the battery meter? It worked until I installed my graphics driver, I don't understand why it does not work now.

  Thank you
  Mike
  HP G62-225DX 4 GB Ram 2.3 GHz Dual Core Pentium 4. 250 GB HARD DRIVE.
  XP Pro 64

  Hi, Mike

  Thanks for posting in the Microsoft Community.

  I'm sorry to hear that you have problem with the Power meter on your Windows XP computer. I would like to know more information, so that we can help you better.

  1 - is this problem started after the installation of Windows XP?

  2. do you get any error code or error message while starting?

  Let us try the following methods; I'm sure this will help you to solve the problem.

  Method 1:

  Run the fixit in the following Microsoft FixIt.

  The problems of power consumption and extend the life of laptop battery:

  http://support.Microsoft.com/mats/windows_battery_power_settings

  Method 2:

  Try the steps in the following Microsoft article.

  How to display and use the icon "Power Meter" in the area of notification in Windows XP:

  http://support.Microsoft.com/kb/909606

  Please reply with the status of the issue, so that we can better help you.

• My hard drive died. A new hard drive has Windows 7 preloaded?

  Hello world

  I have a laptop HP G62-225DX with Windows 7. My hard drive died. I think to buy a new one. A new hard drive for HP already installed Windows 7, or I have to buy Windows again?

  Hello

  A new HARD drive will have no operating system - you'll need to use your set of recovery disks to install Windows 7 on disk.  The procedure is detailed in the document of HP here.

  If not create you these discs or have lost them, you can order a replacement set using the link below - the cost varies a bit depending on where in the world you live, but they are generally inexpensive.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• No volume screen after a clean install of Windows 7 Ultimate

  Recently, I started College, my program gave me a free upgrade to Windows 7 Ultimate. Not having a clean installation since the purchase of this PC, I thought it was the right time to do it. I realize that when clean installation of windows, you will lose a few pilots, after a lot of research I was unable to find anything to display on for volume orders. If someone is able to find something that could solve my problem, it would be much appreciated.

  Thank you, Jason.

  I have a HP G62 225DX

  64 bit

  Windows 7 Ultimate

  Hello

  Download and install the latest version of HP OSD on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Once done, restart the laptop.

  Kind regards

  DP - K

• Locked out; How can I change my password to windows 7 without signing in?

  I recently went for about 8 months for school and left my HP G62-225dx, with WIndows 7 on it, at home. Recently, I came back and forgot the password in the meantime. Is it possible for me to change the password without A) lose my files or B) connection on my own profile?

  I tried the "Safe Mode with network" thing, but all that was to take me for a version slightly zoomed in to my regular account.

  If someone could help me out here, it would be great.

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Wrong size of hard drive

  Hello

  I got a new hard drive for my laptop HP G62-225DX with recovery disks. Recovery disks did not work, so I installed Windows of Windows 7 ISO CD.  And it worked. But today, I discovered that my computer shows me that I have only C drive and it's 67Gb. The entire HDD is 320 GB. Where is 253 Go? Perhaps because of these recovery discs? When I start my computer, I have two options to run 'Windows 7' or 'Windows Setup (EMS Enabled)'. This second option is maybe these recovery discs?

  You are the very welcome.

  I do not know exactly because I do not have any partition empty on my PC.

  I think you do a right-click on the C:\ partition and select Extend Volume.

  See if that helps or google Extend Volume Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/extend-volume-using-Windows-7-disk-manager/c030c749-0c4c-46BC-9CD5-33506c08adc4

• PCI SIMPLE COMMUNICATIONS CONTROLLER DRIVERS for WINDOWS 7 Ultimate 32 bit for HP G62-361TX

  Hello

  I upgraded OS and installed the drivers. All the drivers are fine looking, except I get the error in the network and Communications PCI controllers controller driver. Can someone please help me get the correct drivers? For this reason, I am not able to connect to the wireless network.

  When trying to install motorola Ralink wireless driver adapter bluethoot, Iam getting error "Bluethoot material must be enabled before installing the driver for this" and attending Wireless it is showing people with disabilities and showing willnot be able to from here. However, blue LED on F12 is on and I couldn't find an option to turn on a wireless device in the BIOS. Not sure that these problems are related?

  I want to just enable the wifi networks. Help, please.

  Here's my laptop details:

  Model No.: HP G62-361TX

  OS: Windows Ultimate 32 bit

  Any help will be appreciated.

  Thank you

  Hello:

  You need this driver for the PCI communication controller.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-80009-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 4296702 & sw_lang=.

  I need to view the ID of the hardware for the network controller (you can copy and paste text directly from Device Manager), so I can post the link to the drivers for it.

  Go to Device Manager, then click on the network with the small yellow controller! Select this option.

  Then follow these instructions to find the hardware ID.

  The hardware for a Windows device id is located in the Windows Device Manager. To check the hardware for a device id, follow these steps:

  1. Open the Device Manager in the Control Panel. You can also type "devmgmt.msc" in the run option in the Start menu.
  2. In Device Manager, right click on the device and select Properties from the context menu.
  3. Then, select the Details tab.
  4. Now select the hardware ID in the drop-down list.