Windows 7: chain explorer.exe endlessly about the file type association

Similar Questions

• Why my windows phone says he can not download the file type when you try to install the firefox browser?

  I have no restrictions on the phone. I tried to be sure and use the features of security as... Safe search, cookie and other block. He repeated, however, unable to download the file type when I try and install one of the browsers to date. What is interesting to say the least. Because my browser already uses the version more up-to-date. I have internet explore using a nokia windows 8

  Hello, the mobile version of firefox is not available on the windows phone platform: Firefox work on my mobile?

  There was technical and legal obstacles in the app store initially that discouraged mozilla to start any developments in this direction. I do not know the current situation, but given that mozilla is now focusing its efforts on the creation of firefox os as a platform open source web-based, I doubt you'll see firefox on your windows phone device in the foreseeable future...

• Change the file type associations after installation?

  Hello
  I need to open/save the MP3 files with hearing. apparently I forgot to tick the box concerned during the part of the configuration of the hearing file type association. is it possible to subsequently add .mp3 to a list of types of files related to the hearing?

  I checked - in trying to get around via right click on an mp3 file--> open with... and then look up audition.exe it just goes back to the list of programs to choose but hearing is not the

  also, I can do drag & drop mp3 files in audition and work on/with them, but can not save in .mp3. It's a little strange behavior, because I do not see why I can work with the files but cannot really open them with hearing or save them from the inside of the hearing. I hope that I don't have to reinstall it, any thoughts on this?

  Thank you
  Fux

  EDIT: I recognized that this also counts for the .pk files, even here...

  You certainly click Audition.exe file in the folder Program Files/Adobe/Audition 3.0? See http://www.winvistaclub.com/t19.html to learn how to change file associations in the operating system.

  Yes once you have done a backup as the hearing remembers format you saved in what concerns next time when you're just a backup.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be "read".

  I am running Mirosoft Windows XP Professional Version 2002 Service Pack 2

  Before that, I really want to customize my windows and then I search in google "how to customize windows xp visual styles. After that, I follow the 7 steps how to customize. This is the link I will:

  http://www.WikiHow.com/customize-Windows-XP-visual-styles

  Then, after I followed the steps, it asks me to install this: Neowin patch. When I installed it, it says that my OS is not original, but I just reinstalled the last time.

  Are the cause of the problems of the patch that I installed it in the first place?

  Is it related with my OS?
  How to solve this problem?
   
  URGENT!

  Hello

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the Windows XP operating system.

  It would be great if you could answer these questions to help you further.

  1. When you receive this error message, Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be 'read '?

  2 is the issue limited only to Neowin patch installation?

  There could be a conflict of memory with a driver or due to the bad memory or memory.

  I recommend you to check with the activation status of Windows XP.

  a. Click Start.

  b. click on all programs, then accessories.

  c. click System Tools.

  d. click on activate Windows.

  Windows XP Visual Styles, see the steps in the following Microsoft article.

  http://msdn.Microsoft.com/en-us/library/aa289524 (v = vs. 71) .aspx

  http://msdn.Microsoft.com/en-us/library/5d1acks5.aspx

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• error at startup after virus cleaning: "!" Office could not load or run 'explorer.exe' specified in the registry. "

  Original title: Tidying to the top of my desk after riding it a virus

  After cleaning after infection by the virus qqlog whenever I log in, I get an error message; " ! Office could not load or run 'explorer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.  Explorers of two Windows Open C:\. And when I close the first error an another explorers of five Windows Open C:\.  Basically, I still have to do, but don't know how. Apart from the slowness of opening no other problems. Can someone give me help please.   Thanks Andrew

  Make sure you have backups of all important data for you (Favorites/internet Favorites, music, photos, documents, spreadsheets, presentations, drawings, numbers of series and product keys and installation to start with media) as soon as POSSIBLE.

  Format and start from scratch OR use the 'Restore Factory default' the manufacturer can give you.  Your stuff of restoring a backup after installation of your spplications on the machine.

  Why?  If this system is still messed up after cleaning a virus/trojan/worm/spyware/adware/malware - it may have to discover/waiting more moving and / ore actually operate 100% may take longer to restore to the Virgin (not to mention you can never achieve 100% otherwise.)

• Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Hi Dan,.

  Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

  Also, what exact version of Photoshop and Lightroom are you using?

  Search for graphics card drivers update as well.

  Kind regards

  Assani

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I have windows XP: what do I do with the files that won't get defragmented?

  I have windows XP: what do I do with the files that won't get defragmented?

  There are about 4300 MB of files that will not defragment.

  I tried to defrag them for months, but without success.

  These files are generally used, as a result, they get w/o defraged some users

  adjustments. Run disk clean up, go after, in run, type: cmd

  In cmd type: Defrag C:

  Once her thru, type: EXIT

  After, R.Click on "my computer", properties, Advanced tab, performance, swap file button,

  with selected C:, do not select "no paging file", click on set 2 X, close, restart the pc. Once again, XP

  go in run, type: cmd cmd type: Defrag C:

  It will take more time than before, once its type thru,: OUTPUT

  Reopen the system pagefile, click on 'letting the system manage' value set 2 X, close, agree to

  replace the new swap file, restart the pc when prompted.

  Every so often, repeat the process.

• Opening of the Creative Memories error message: "Windows Media Player cannot play the file. The player might not support the file type or might not support the codec.

  I tried to open a message sent by Chris Veit of Creative Memories. This is the error message I get:

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  I'm technologically challenged! Specific remedies have greatly appreciated.

  original title: Windows Media Player error message

  OK... sounds like you have just a link to
  something that is archived online.

  Maybe you could go to the website of House
  and get some information about the media file.

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• OSD-04011: GetFileInformationbyHandle() failure, unable to get information about the file

  Hi all

  I try to get my ORACLE ASM (v 11.1.0.7) software works on Windows Server 2008 Standard SP2 (32-bit), but unfortunately, I hit the next windows operating system error with no resolution in sight.

  OSD-04011: GetFileInformationbyHandle() failure, unable to get information about the file
  S/O-error: incorrect function (OS 1)

  Basically ORACLE software try to read the header information of a partition of existing online RAW drive. According to the error made ORACLE unrecognized function call. How can I make this feature available? Need help ASAP please.

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in Windows Server communities at the above address.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• How can I specify the file types to be included in a library in Windows 7?

  How can I specify the file types to be included in a library?  For some reason any overall my library it shows ALL files and not only the documents in the document library, the music in the music library and the pictures in the picture library.  In other words in my document library, it is also show all my music and my photos, in my music library, that is to show all my documents as well as all my photos etc.  I know I have to do something wrong but does not know what it is.  Can someone help me please?

  * original title - libraries and some type of file

  Hello

  Libraries should show only the files that are contained in the files that you add to this library.

  Example:

  In Windows Explorer, select the Document library.

  In the window display on the right, click the link x sites in the top/left of the window.

  This will open a dialog box displays all the folders that have been added to this library.

  By default, the Library of Documents should show the folders My Documents and public records .

  If there is other records showing that you don't want in this library, Select the folder and click on the Remove button.

  You can also right click the documentslibrary, in the Part of Navigation and select Properties. At the bottom of the Properties dialog box, click on the button by default is restore to remove all additional files have been added.

  Tell us what you find.

  Concerning

• Adobe Acrobat Reader DC became the file type for files .exe on my PC when it is installed, how can I change this?

  I installed Adobe Reader DC on my PC and adobe has become the file type by default to open.exe such as chrome files, ms word and internet explore.

  I uninstalled the application and everything is back to normal with my .exe files and then I reinstalled adobe and it's back to the default type of the .exe file.

  Can someone tell me please how to fix this?

  Maybe https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html