Computer laptop HP G62-225DX screen displays only in safe mode.

Similar Questions

• My Vista computer is unable to normally, it starts only in safe mode.

  My computer would not start windows normally, except secure boot Mood.

  Please tell us how to correct the faults.

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  _____________________________________________________________

  If the above isn't the problem;

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Computer laptop blue started upward, can't get into Safe Mode. A way to recover the files?

  Laptop was not load its on the inside before, after a week, I've sorted the problem. but somehwere an along the line of this week, that my windows 7 ultimate decided he wanted me messing around. laptops left on now but does not boot to windows. I tried a system restore, I want to avoid a clean sweep of windows if possible because it is files that I need on my hard drive. Is it possible for me to access my files? If this is not what is the easiest way to sort my laptop?

  Luqman > what is the easiest way to sort my laptop? >>>

  OK, you ready for the big guns now. First of all, turn your machine so that you can read the SNID. Then, pull out your credit card.  Thirdly, connect on http://us-store.acer.com/rcd/ 8 ^)

  Jack E/NJ

• Windows starts only in safe mode after refomatting

  I reformatted computer my husband, during the process of re-setup the computer shut down & restarted in safe mode. I can't the computer to start Windows normally, it starts only in safe mode or at least what looks like safe mode. I am trying to install Windows XP Home Edition. I was not able to install any device to connect to the internet on this subject, so I can install SP3.

  Can someone help me solve this problem please

  Hi Malinda1979,

  Since you formatted and installed windows, its non-secure mode. Try to install display drivers. You can check if the display drivers are installed correctly click Start-> settings-> Control Panel-> system. Hardware-> display adapters. If you have any yellow exclamation next to any device, you must install the drivers.

  I hope this helps.

  * You need to install all the drivers of your motherboard / driver cd (which came with your pc), including the chipset, sound... etc.

  If it's a laptop brand / Office (HP, Dell, Acer, etc), you can visit the manufacturing site and select the model and download the latest orders.

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• Acer laptop Vista keeps coming back to "start in safe mode" screen

  laptop girls, can go to set up the screen or it returns to the screen of "start in Safe Mode?  Help, please.  Have Windows disk, but it does not appear to read.

  Hello

  1. What is the number of the model of the laptop?

  2. what happens when you try to start the computer in safe mode?

  3 have there been recent changes made on the computer before the show?

  I suggest you to refer to the article and check if it helps.

  What to do if Windows does not start correctly

  Note: Installation custom (own) Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After installation, you will need to reinstall your programs and restore your files from backup copies.

  Let us know the results. We will be happy to help you further.

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• Satellite Pro L300 - commissioned only in safe mode

  Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.

  Can someone help with this problem?

  Hey Buddy,

  If the computer starts only in safe mode, this means that something has confused the OS

  Since when have you noticed the problem?
  No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)

• After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

  After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

  PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

  I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

  I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

  I did it twice.

  Any ideas? Thank you.

  Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

  To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

  This solve your problem?

  Please send BRAVO

• Inspiron 6000 connect only in safe mode

  Hi I have a very complicated problem with this dell inspiron 6000 would initially connect to the internet fine and now connect only in safe mode with networking support.

  Windows XP pro, all updates and the drivers installed and the latest drivers for the hardware as well.

  I am connected ATM threw a wired router with the onboard broadcom 440 when in normal mode, I get a DNS error and I am in safe mode without error LOL. I ran ipconfig with each listed switch.

  It is setup exactly the same thing in normal mode as in trunk then yes time for a punt and hope for a field goal.  nothing has been changed any software added recent updates installed were the 8th of this month. It comes from spending a couple of days.

  I used the winsockfix corrupt but also removed all the network hardware in normal conditions and then restarted in safe and removed there as well. Following is the display of the ipconfig command.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) PRO/Wireless 2200BG Network
  Connection
  Physical address.... : 00-15-00-1B-73-0E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... Autoconfiguration IP address: 169.254.156.42
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:16:41

  End of the lease...: Wednesday, May 14, 2008 02:16:41

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:22:23

  End of the lease...: Wednesday, May 14, 2008 02:22:23

  C:\Documents and Settings\Misty >

  now, you'll notice the wireless is on a different dns so I disabled it because I do not use home wireless. I can still connect if its active but only in safe mode.

  So in conclusion, I hope that im missing an obvious problem and that people will notice it for me until I break a toe to try this investment option.

  
  

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

• Could not get computer working properly due to malware. Went to safe mode and cannot fix. Can we please hep

  Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep

  Hello

  1. what exactly is the problem?
  2. Why do you think malware are causing this problem?
  3. What have you tried in safe mode?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• HP g62 pc notebook: computer laptop hp g62 notebook

  my laptop computer cam with processor AMD athlon 2 N370.

  I wanted to know if I could change the processor processor intel core i5

  Welcome @TechPerson121.

  Thank you for visiting the Forums from the HP Support!

  I read your post on the Forums of HP's Support and I understand that you are looking to upgrade your processor. Here is the maintenance and Service of Guide for the laptop HP G62.

  If you take a look at page 1 of Chapter 1, you will see a list of the processor AMD that are compatible with your specific laptop.

  You can use one of the following compatible AMD processors:

  • AMD Phenom™ processor N930 (total 2.0 GHz, 2 MB L2 cache, 1333 MHz) - Quad core 35 W
  • Processor AMD Turion II P560 (2.5 GHz, 2 MB of L2 cache, 1066 MHz) - Dual core 35 W
  • Processor AMD Athlon II N370 (2.5 GHz, 1 MB of L2 cache, 1066 MHz) - Dual core 35 W
  • Processor AMD Turion II N570 (2.7 GHz, 2 MB of L2 cache, 1066 MHz) - Dual core 35 W
  • Processor AMD Phenom II N970 (2.2 GHZ, 2 MB L2 cache, 1333 MHz) - Quad core
  • Processor AMD Phenom II P960 (1.8 GHZ, 2 MB L2 1066 MHz effective) - Quad core 25 W
  • Processor AMD Phenom II N870 (2.3 GHZ, 1.5 MB L2 cache, 1333 MHz) - Triple core
  • Processor AMD Phenom II P860 (2.0 GHZ, 1.5 MB L2 cache, 1066 MHz) - Triple core 25 W (only for model 1.2)
  • Processor AMD Phenom II N660 3.0 GHZ 2 MB
  • Processor AMD Phenom II P950 (2.6 GHZ, 2 MB L2 cache, 1333 MHz) - Quad core 25 W
  • AMD Athlon II P360 discrete processor 2.3 GHZ 35 W (only for model 1.2)
  • Processor AMD Champlain V160 (2.4 GHZ, 512 MB L2 cache, 1066 MHz) - single 25 W

  In the maintenance and service guide, I provided above, you can also find the part number for the radiator, if in fact it's the question and you want to replace. You can use the HP part Surfer to find compatible/replaceable parts.

  If the information provided resolves the issue, please indicate this message as an "acceptable Solution" so that others who have the same problem can easily find the step.

  If you need assistance, I would be more than happy to continue to help you.

  Don't forget to click the Thumbs Up to show your appreciation.

  Thanks for joining the community of support HP!
  Have a great day!

• screen displays only the hex (unicode) characters

  screen only displays text in blocks of 4 characters that looks like unicode. Other applications, including IE work fine.

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If that works, then try the toggle some of downtown of Boolean gfx on the topic: configuration page to enable or disable some features.
  
  Filter: gfx

• Computer desktop and all the screens display very large format of normal size no

  I'm having some their with my screen showing all very fat and wide. I tried to shut donw the computer and start several times see if it could set as it normally does, but it's not. Nothing appears on the screen and I'm having a hard time watching a things. This isn't a problem because of the zoom either key...

  Help, please!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner